R2SHSD8000ReFLEX 2-Way Messaging Device

1 ReFLEX Two Way Messaging Device User’s Guide (AT 100) ATCOM WIRELESS 2 IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet. Consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been moisture, does not operate normally, or has been dropped. 15) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPATATUS TO RAIN OR MOISTURE.) THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCTS ENCLOSURE THAT 3 MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PERSENCE OF INPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 4 Welcome ................................................................... 4 Getting Started ........................................................... 5 What’s in the Box? ............................................................... 5 The Home Screen ................................................................. 6 The Keyboard ......................................... ............................ 7 How to Key in Capital Letter ......................................... 8 How to use ALT key .................................................. 8 Special Key Description .............................................. 9 Starting ................................................................... 10 Turn On and Off ................................................ 10 How to Reading a Receiving Message..................... 10 Mailbox ......................................................... 11 Inbox (Received Message) ................................... 12 How to Reading a Message ............. ...................... 12 Message Option ................................................. 13 How to Delete a Message ....................................... 14 How to Response to Received Message ......................... 15 Outbox ( Sent Message) .............................................. 16 How to Reading a Message .................................... 16 Message Option ....................................................... 17 How to Delete All Message ..................................... 17 Compose .......................................................... 18 How to Compose a Message ................................... 18 Compose Option .................................................. 20 How to M\make a MCR List .................................. 20 Addresses Book........................................................ 21 How to Register a New Contact Address ........................ 21 How to Register New Group Address ............................... 23 Address Option -Contact.................................................... 25 Address Option – Group............................................ 28 News/Info Inbox ........................................................... 30 Folder ........................................................ 31 Application ........................................................ 33 Alarm ...................................................................... 34 Scheduler.................................................................. 36 Game .................................................................... 37 5 Customized .............................................................. 37 How to Set Up Time & Date ........................................... 38 How to Set Alert” ..................................................... 40 How to Set Display ....................................................... 45 How to Edit Quick Text ........................................... 46 How to make a Custom replies ................................... 47 How to make a Signature .......................................... 48 How to Edit My Info ........................ ........................ 49 Device ............................................................ 51 Power Off .............................................................. 51 Battery Status Check ............................................. 51 Memory Status Check ........................................... 52 Appendix 1- ICON List .................................... 53 FCC Compliance .........…

Text truncated - open the document above for the full version.

SAFETY INFORMATION FOR FCC RF EXPOSURE WARNING! Read this information before using your phone CAUTION In August 1996, the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this pager complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair quality, damage the pager, or result in violation of FCC regulations. Do not use the pager with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the back of the pager kept 1.0 cm from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 1.0 cm separation distance between the user's body and the back of the pager, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Note: For more information about RF exposure, please visit the FCC website at www.fcc.gov.

Block Diagram Mixer Frequency Synthesizer RX ANT RSSI Mixer PA BIAS 20.945MHz RSSI Mixer Qua Detec 455KHz 929~ 942MHz SAW Filte r 896~ 902MHz LNA X¡ ̄TAL Filte r 21.4MHz SAW Filte r VC- TC XO 16.8MHz Modu VCO MO D Rechageable Li-Ion Batt. 3.7V VCC_BAT TX PA BIAS PA BIAS PA_EN VCC_BAT AGND VCC_BAT REGULATOR 3.0V VCC_RF RF_EN VCC_BAT REGULATOR 2.5V VCC_2.5 VCC_BAT R AG C 900~ 920MHz VCO LO O P Filter VC O MO D VCC_RF VCC _RF PADRIVE TX_BUFFER IF IC VCC _RX 1.0V VCC _RX VC C_RX VCC _RF VC C_RF VCC _RF 30dBm UP_C onverter LOOP ANT TX ANT HELICAL ANT Frequency Synthesizer CPU LCD 39KEY Keyp ad DAC Oscillator MSB LSB BS QC Filter Selec tor RSSI Quad Detector 5KHz DAC Data PLL Data VC- TC XO 16.8MHz Modulation Filter VCO MO D BACKLIGHTING E/ L , LED REGULATOR 2.5V VCC_2.5 VCC_BAT REGULATOR 3.3V VCC_3.3 PA_EN RF_EN DATA Flash (4MBIT) MOTOR SRAM (2MBIT) 14.7456MHz RSSI IF IC VCC _RX 1.0V VC C_RF VCC _RF VC C_2. 5 VCC _2 . 5 VCC_RF VCC_2.5 er VCC_2.5 VCC_3.3 VCC_3.3 VCC_3.3 VCC_2.5 VCC_3.3 BUZZER : Power INPUT : Power OUTPUT No te :

ONETECH Corp. http://www.onetech.co.kr 505 SK APT Factory, 223-28 Sangdaewon 1-Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do 462-121, Korea [ Tel ] 82-31-746-8500, [ Fax ] 82-31-746-8700 ONETECH April 29, 2004 FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner Reviewing Engineer Re: Request for confidentiality per Section 0.459 of FCC Rules Applicant: Hoseo Telnet Co., Ltd. FCC ID: R2SHSD8000 To whom it may concern, Request is hereby submitted, on behalf of my client, Hoseo Telnet Co., Ltd., to withhold from public review certain portions of the application for equipment certification for the referenced FCC identifier. In particular, the following sections of the application and report are requested to be kept confidential: Schematics Operational Description Tune-Up Procedure Rationale for request for confidentiality: Hoseo Telnet Co., Ltd. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the confidential portions of this application to competitors would give them competitive advantage in developing similar products. If you have questions or need further information, please contact the undersigned. Sincerely, Y.K. Kwon / Chief Engineer Onetech Corp. Email: [email protected]

Chris Harvey From: Y. G. Gwon [[email protected]] Sent: Tuesday, June 29, 2004 6:53 AM To: [email protected] Cc: [email protected] Subject: RE: Additional Information needed AN04T3915 FCC ID: R2SHSD8000 Page 1 of 2 6/29/2004 Dear Mr. Harvey, Thank you for your kind comments. Regarding your comments, I would like to answer those step by step as following. If you need more information, please inform me that in detail. 1. Yes, You are correct and I am sorry about that. Enclosed please find a revised test report. The total value, 32.77dBm is mis- typing and correct value is 31.77dBm and the 1 Watt on the page 9 of 26 means product specification by the applicant. 2. Enclosed please find a revised manual in this email. For your reviewing, I would like to enclose revised page and totally revised manual. The file name for revised page for SAR requirement is SAR.doc and the contents is on page 58 in the manual. 3. The RF Power is fixed output power, so it cannot variable and enclosed please firnd tune-up procedure for testing. 4. Enclosed please find a file for SAR Test Plots in this email. Best Regards, Y.G Gwon ONETECH Testing & Eval. Lab. TEL: +82-31-765-8289 FAX: +82-31-766-2904 email: [email protected] -----Original Message----- From: Mike Kuo [mailto:[email protected]] Sent: Monday, June 28, 2004 12:39 PM To: Y. K. Kwon (E-mail) Cc: Chris Harvey Subject: FW: Additional Information needed AN04T3915 FCC ID: R2SHSD8000 Importance: High Hi Y. K. : Above application was reviewed by Chris Harvey. Below is his questions, please submit your reply to Chris and c.c. to me. Best Regards Mike Kuo -----Original Message----- From: Chris Harvey Sent: Sunday, June 27, 2004 7:47 PM To: Mike Kuo; Barbara Judge Subject: Additional Information needed AN04T3915 FCC ID: R2SHSD8000 Importance: High Mike/Barbara, the Form 731 is incomplete so I can not determine who should get this Request for Information. Can you either forward to the correct person (and copy me) or let me know to whom I should send it. Thanks, Chris I have performed the initial review of the above referenced application and find that the following items need to be addressed: 1. The RF test report indicates a measurement of 31.67dBm with a correction of 0.1dB (calculates to 31.77dBm = 1/50 Watts), however the final corrected number in the table shows 32.77dBm. If this is a typographical error, please correct this. Additionally, the table on page 6 of 29 indicates that the maximum power is 1Watt, which conflicts with the measurements. 2. This device is a handheld RF transmitter used by the General Public. The required Users Manual RF Exposure information is not included in the Users Manual submitted with this application. Please submit updated the Users Manual that includes the required FCC RF Exposure information for body- worn operation (indicating the specific clip and separation distance used for SAR measurements). 3. Please provide exhibits for Tune-Up procedure (per 2.1033(c)(9)) and Range of Operating Powers (per 2.1033(c)(6)). 4. Please submit the SAR Test Plots listed as Appendix A in the SAR report Table of Contents. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best regards, Chris Harvey [email protected] Page 2 of 2 6/29/2004

FCC ID. : R2SHSD8000 File No. : E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : R2SHSD8000 File No. : E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab.

FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. IDENTIFICATION LABEL: PROPOSED FCC ID LABEL Due to the product size, only the FCC ID shall be permanently affixed to the rear side of the equipment and other information shall be placed in the instruction manual. FCC ID Location FCC ID : R2SHSD8000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID.: R2SHSD8000 File No.: E044R-040 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab.

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. PRODUCT COMPLIANCE DIVISION SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr CERTIFICATE OF COMPLIANCE (SAR EVALUATION) EUT Type: ReFELX Two Way Data Device Model(s): HSD8000 Frequency Range: 896 MHz – 902 MHz Max. SAR Measurement(s): 0.749 mW/g(1g) Body SAR Max. RF Output Power : 1 W Max. RF Output Power : 1.47 W (Conducted Power) Application Type: Certification Trade Name(s): AT 100 FCC Rule Part(s): §2.1091; FCC/ OET Bulletin Supplement C [July 2001] This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled Environment Occupational exposure limits specified in ANSI/ IEEE Std. C95.1- 1992 and had been tested in accordance with the measurement procedures specified in ANSI/ IEEE Std. C95.3- 1992. (See Test Report). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Hyundai C-Tech Co., Ltd. Certifies that no party to this application has been denied FCC benefits pursuant to section 5301 of the Anti- Drug Abuse Act of 1998, 21 U.S. C. 853(a) Report prepared by : Ki-Soo Kim Manager of Product Compliance Team This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd. Table of Contents Manufacture; HOSEO TELNET CO., LTD. 157-033 680 Deungcheon3-Dong Kangseo-Gu, Seoul, Korea FRN : 0010738953 Date of Issue : April 20, 2004 Test Report No.: HCT-SAR04-0405 Test Site : HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. FRN : 0005866421 FCC ID : APPLICANT : R2SHSD8000 HOSEO TELNET CO., LTD. Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr 1.1 SCOPE ---------------------------------------------------------------------------------------------------------- 2.1 INTRODUCTION / SAR DEFINITION --------------------------------------------------------------------- 3.1 SAR MEASUREMENT SET-UP --------------------------------------------------------------------------- 4.1 E-FIELD PROBE SYSTEM --------------------------------------------------------------------------------- 5.1 E-FIELD PROBE CALIBRATION PROCESS -------------------------------------------------------- 6.1 PHANTOM, HOLDER, & EQUIVALENT TISSUE --------------------------------------------------- 7.1 SYSTEM SPECIFICATIONS ------------------------------------------------------------------------------ 8.1 MEASUREMENT PROCESS ------------------------------------------------------------------------------ 9.1 ANSI/ IEEE C95.1 - 1992 RF EXPOSURE LIMITS -------------------------------------------------------- 10.1 MEASUREMENT UNCERTAINTIES ------------------------------------------------------------------- 11.1 TEST DATA SUMMARY ---------------------------------------------------------------------------------- 12.1 SAR TEST EQUIPMENT LIST --------------------------------------------------------------------------- 13.1 CONCLUSION ------------------------------------------------------------------------------------------------ 14.1 REFERENCES -------------------------------------------------------------------------------------------- APPENDIX A – SAR TEST PLOTS APPENDIX B – TEST SETUP PHOTOGRAPHS APPENDIX C – EUT PROFILE PHOTOGRAPHS APPENDIX D – DIPOLE VALIDATION PLOTS APPENDIX E – PROBE CALIBRATION DATA APPENDIX F – DIPOLE CALIBRATION DATA 3 4 5 6-7 8 9 10 11 12 13 14 15 16 17 Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr SAR MEASUREMENT REPORT 1.1 SCOPE Environmental evaluation measurements of specific absorption rate 1 (SAR) distributions in emulated human head and body tissues exposed to radio frequency(RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 2 1. 2 Applicant 2. • FCC ID: R2SHSD8000 • EUT Type: ReFELX Two Way Data Device • Trade Name: AT 100 • Model(s): HSD8000 • Frequency Range: 896 MHz – 902 MHz • Application Type: Certification • Modulation(s): 4 Level FSK • Max SAR Measurement: 0.749 mW/g(1 g) Body SAR • Max. RF Output Power: 1 W • Power Supply: Li-Ion Battery 3.7V, 680 mA • Place of Test(s): Hyundai C- TECH. EMC Lab. • Date(s) of Tests: March 24, 2004 • Report No.: HCT-SAR04-0405 Figure 1. SAR System 1 Specific Absorption Rate (SAR) is a measure of the rate of energy absorption due to exposure to an RF transmitting source (wireless portable device). 2 IEEE/ANSI Std. C95.1-1992 limits are used to determine compliance with FCC ET Docket 93-62 Company Name: HOSEO TELNET CO., LTD. Address: 157-033 680 Deungcheon3-Dong Kangseo-Gu, Seoul, Korea Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr 2.1 INTRODUCTION The FCC has adopted the guidelines for evaluating the environmental effects of radio frequency radiation in ET Docket 93-62 on Aug. 6, 1996 to protect the public and workers from the potential hazards of RF emissions due to FCC-regulated portable devices.[1] The safety limits used for the environmental evaluation measurements are based on the criteria published by the American National Standards Institut…

Text truncated - open the document above for the full version.

Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr APPENDIX A – SAR TEST PLOTS Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr

Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr APPENDIX C – DIPOLE VALIDATION PLOTS Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr APPENDIX D – PROBE CALIBRATION DATA Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hct.co.kr Report No.: HCT-SAR04-0405 FCC ID : R2SHSD8000 DATE : April 20, 2004 HYUNDAI CALIBRATION & CERTIF…

Text truncated - open the document above for the full version.