R48-V5APAirplay 2.0 System

English 3 2 Remote Control (with Battery) V5AP Safety Instructions & Warranty English 5 4 solid white English 7 6 amber The WiFi indicator on the speaker will blink amber as your settings are transferred to the product. The indicator will then turn solid amber as the system logs on to your network. blinking amber solid white English 9 8 Mac OSX ® Windows 7 ® DMP - User Interface 169.254.1.1 You can enter a name for your speaker in the AirPlay Device Name space and click “Apply.” The default will be “Wren_V5” followed by a unique identifying number. AirPlay Device Name:Apply Wren_V5 2C9D37 00:07F5:3C:9D:37Mac Address: amber Congratulations! Your Wren V5AP is now ready to use as an AirPlay device! solid white English 11 10 English 13 12 English 15 14 ProblemPossible Solutions I am unable to connect the Wren V5AP to my network. 1. Verify that your WiFi network is functioning. 2. The WiFi signal may be weak or the Wren V5AP may be out of range of your WiFi network. Move the Wren V5AP closer to your network access point. 3. Reset the Wren V5AP Hardware: • Unplug the power supply from the rear of the V5AP. • Wait 15 seconds, then plug in power supply and turn on the V5AP. 4. Verify that you have selected the WiFi source on the V5AP before trying to set up your network connection. I have successfully connected the Wren V5AP to my network, but I cannot select the Wren V5AP speaker from iTunes or my iOS device. 1. Verify that the Wren V5AP is on. If no indicators are lit, then press “Power” to turn on the system. 2. Verify that you are running the latest version of iTunes and that your iOS device is running version 5.0 or greater. 3. Try restarting iTunes or your iOS device. 4. Reset the Wren V5AP hardware: • Unplug the power supply from the rear of the V5AP. • Wait 15 seconds, then plug in power supply and turn on the V5AP. Note: Please check compatibility at wrensound/compatibility.com to confirm that your iOS device meets the criteria for the Wren V5AP. I have selected the Wren V5AP speaker as my AirPlay device, but I do not hear any music. 1. Press Play on your iOS device or iTunes; music may be paused. 2. Verify that the volume is not muted. (If the volume is muted, the power button will be solid amber.) 3. Verify that the Wren V5AP is not connected to another iOS device, iTunes library or Apple TV. 4. Try restarting iTunes or your iOS device.

V5AP Safety Instructions & Warranty English Note: This mark applies only to countries within the European Union (EU) and Norway. This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). This lebel indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. No naked flame sources - such as candles - should be placed on the product. Place the equipment near a main power supply outlet and make sure that you can easily access the power breaker switch. WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the back panel or included power supply of the product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plus Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer. Wren Sound Systems, LLC Limited One/Three Year U.S. Warranty: LIMITED WARRANTY Wren Sound Systems (“Wren”), subject to the limitations contained herein, warrants its Wren Sound Systems branded wireless sound systems contained in its original packaging (“Products”) against defects in materials and workmanship when used normally in accordance with Wren’s guidelines and instructions, for a period of one (1) year from the date of original retail purchase by the original end-user customer (the “Customer”). The foregoing warranty (the “Warranty”) is extended for two (2) additional years, providing for a warranty of three (3) years in total, in the event the Customer shall register the Products at www.wrensound.com/register within thirty (30) days of the date of purchase. This warranty is limited to products purchased in the United States of America.” WHO IS PROTECTED BY THIS WARRANTY This Warranty protects the original Customer and is not transferable or assignable. Any attempt to transfer or assign this Warranty shall cause it to immediately become void. HOW TO SUBMIT A CLAIM UNDER THE WARRANTY For warranty service within the United States, contact Wren’s warranty department at [email protected]. The original receipt or other proof of purchase satisfactory to Wren must be presented to Wren whenever warranty service is required. If warranty service is requested after the one (1) year anniversary but before the three (3) year anniversary of the date of purchase, evidence of registration of the Product must also be presented. You are responsible for transporting your Product for repair, at your sole cost and expense. However, Wren will pay return charges for the Product if the repair is covered under Warranty. Wren shall have the right, in its sole discretion, to either (i) repair, (ii) replace, or (iii) issue a refund of the original purchase price of (not including sales taxes or handling or transportation charges) any Products covered by this Warranty and with respect to which a proper claim is made. WHAT IS COVERED AND NOT COVERED BY THIS WARRANTY Except as specified below, this warranty covers all defects in materials and workmanship of the Products. The following are not covered: (i) damage caused by accident, misuse, abuse, product modification or neglect, (ii) damage occurring during shipment, (iii) damage from failure to follow instructions contained in the user manual, (iv) damage resulting from the performance of repairs or modifications by someone not authorized by Wren, (v) cosmetic damage, (vi) damage caused by normal wear and tear, (vii) Products with a missing or altered serial number, (viii) batteries and other consumable parts, and (ix) any claims based on misrepresentations by Wren or any other party, (x) incidental or consequential damages, (xi) the cost of removing or reinstalling the Products. FURTHER LIMITATIONS AND DISCLAIMERS EXCEPT AS EXPRESSLY SET FORTH HEREIN, AND EXCEPT WHERE PROHIBITED BY LAW, WREN DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST LATENT DEFECTS, WITH RESPECT TO THE PRODUCTS, THEIR DESIGN, FUNCTIONALITY OR REPAIR. TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. Neither Wren nor any party involved in the creation, manufacture, distribution, sale or servicing of the Products shall in any event be liable for indirect, special, consequential or liquidated damages or penalties, even if Wren or any such other party knew or should have known of the possibility of such damages. Notwithstanding anything contained herein to the contrary, in no event shall the aggregate liability of Wren to Customer under this Warranty hereunder exceed the total purchase price of the Product. This warranty gives you specific legal rights. You may also have other rights, which vary from state to state. Some states do not allow the exclusion or limi…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20

Report No.: SA120822D03 1 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA120822D03 MODEL NO.: V5AP FCC ID: R48-V5AP RECEIVED: Aug. 21, 2012 TESTED: Aug. 21 ~ 24, 2012 ISSUED: Sep. 21, 2012 APPLICANT: MEILOON INDUSTRIAL CO., LTD ADDRESS: No. 77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA120822D03 2 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................. 3 1. CERTIFICATION ........................................................................................... 4 2. RF EXPOSURE LIMIT ................................................................................... 5 3. MPE CALCULATION FORMULA .................................................................. 5 4. CLASSIFICATION ......................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................ 6 Report No.: SA120822D03 3 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120822D03 Original release Sep. 21, 2012 Report No.: SA120822D03 4 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Airplay 2.0 System MODEL NO.: V5AP BRAND NAME: Wren Sound Systems APPLICANT: MEILOON INDUSTRIAL CO., LTD TESTED: Aug. 21 ~ 24, 2012 TEST ITEM: MASS-PRODUCTION STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Sep. 21, 2012 ( Celia Chen / Senior Specialist ) APPROVED BY : , DATE: Sep. 21, 2012 ( Ken Liu / Manager ) Report No.: SA120822D03 5 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120822D03 6 Report Format Version 5.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 23.8 1.53 20 0.0679 1.00 --- END ---

Report No.: RF120822D03 1 of 41 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF120822D03 MODEL NO.: V5AP FCC ID: R48-V5AP RECEIVED: Aug. 21, 2012 TESTED: Aug. 21 ~ 24, 2012 ISSUED: Sep. 21, 2012 APPLICANT: MEILOON INDUSTRIAL CO., LTD ADDRESS: No. 77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120822D03 2 of 41 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................ 4 1. CERTIFICATION ............................................................................................. 5 2. SUMMARY OF TEST RESULTS ..................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................. 6 3. GENERAL INFORMATION ............................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................ 7 3.2 DESCRIPTION OF TEST MODES .................................................................. 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................ 10 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................... 12 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................... 12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................... 13 4. TEST TYPES AND RESULTS ....................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................ 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ..... 14 4.1.2 TEST INSTRUMENTS .................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................... 16 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 16 4.1.5 TEST SETUP ................................................................................................ 17 4.1.6 EUT OPERATING CONDITIONS .................................................................. 17 4.1.7 TEST RESULTS ............................................................................................ 18 4.2 CONDUCTED EMISSION MEASUREMENT ................................................ 25 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .............................. 25 4.2.2 TEST INSTRUMENTS .................................................................................. 25 4.2.3 TEST PROCEDURES ................................................................................... 26 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 26 4.2.5 TEST SETUP ................................................................................................ 26 4.2.6 EUT OPERATING CONDITIONS .................................................................. 26 4.2.7 TEST RESULTS ............................................................................................ 27 4.3 6DB BANDWIDTH MEASUREMENT ............................................................ 29 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ......................................... 29 4.3.2 TEST SETUP ................................................................................................ 29 4.3.3 TEST INSTRUMENTS .................................................................................. 29 4.3.4 TEST PROCEDURE ..................................................................................... 29 4.3.5 DEVIATION FROM TEST STANDARD ......................................................... 29 4.3.6 EUT OPERATING CONDITIONS .................................................................. 29 4.3.7 TEST RESULTS ............................................................................................ 30 4.4 CONDUCTED OUTPUT POWER ................................................................. 31 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT .................. 31 4.4.2 TEST SETUP ................................................................................................ 31 Report No.: RF120822D03 3 of 41 Report Format Version 5.0.0 4.4.3 TEST INSTRUMENTS ............................................................................…

Text truncated - open the document above for the full version.

Report No.: RF120822D03 1 of 2 Report Format Version 5.0.0 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: RF120822D03 2 of 2 Report Format Version 5.0.0 RADIATED EMISSION TEST