R48CONTROL24GTXRWireless Speaker System-Transmitter

® CONTROL ® 2.4G JBL ® ON AIR OWNER’S GUIDE English 0198CSK - JBL On Air Control 2.4G Inlay.indb 312/02/10 10:51:03 4 IMPORTANT SAFETY INSTRUCTIONS Please read the following precautions before use: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. 16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. 17. The mains plug of the power supply cord shall remain readily operable. 18. Do not expose batteries to excessive heat such as sunshine, fire or the like. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: s 2EORIENTORRELOCATETHERECEIVINGANTENNA s )NCREASETHESEPARATIONBETWEENTHEEQUIPMENTANDRECEIVER s #ONNECTTHEEQUIPMENTINTOANOUTLETONACIRCUITDIFFERENTFROMTHAT to which the receiver is connected. s#ONSULTTHEDEALERORANEXPERIENCEDRADIO46TECHNICIANFORHELP FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. IC Statement and Warning This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du CanadaIC Statement and Warning. 0198CSK - JBL On Air Control 2.4G Inlay.indb 412/02/10 10:51:04 5 THANK YOU FOR CHOOSING JBL For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the JBL system you have chosen will provide every note of enjoyment that you expected – and that when you think about purchasing additional audio equipment for your home, car or office, you will once again choose JBL. Please take a moment to register your product on our Web site at www.jbl.com. It enables us to keep you posted on our latest advance- ments, and helps us to better understand our customers and build products that meet their needs and expectations. The JBL ® On Air Control ® 2.4G is an advanced wireless loudspeaker system that allows you to enjoy your favorite music in remote locations around your home, or to add surround speakers to your home theater system without running wires to the back of the room. To ensure …

Text truncated - open the document above for the full version.

® CONTROL ® 2.4G JBL ® ON AIR BRUGSVEJLEDNING Dansk 0198CSK - JBL On Air Control 2.4G Inlay.indb 8712/02/10 10:51:55 88 VIGTIGE SIKKERHEDSINFORMATIONER Læs følgende forholdsregler før brug: 1. Læs informationerne. 2. Gem informationerne. 3. Overhold nøje alle advarsler. 4. Følg alle instruktioner. 5. Produktet må ikke benyttes tæt på vand. 6. Produktet må kun rengøres med en tør klud. 6ENTILATIONSHULLERMËIKKEBLOKERES)NSTALLATIONSKALSKEIHENHOLD til producentens anvisninger. 8. Produktet placeres væk fra varmekilder som radiatorer, direkte sollys, ovn/komfur eller andre produkter (også effektforstærkere) der udstråler varme. 9. Et to-bens lysnetstik kan vende den ene eller den anden vej i KONTAKTEN6LGDENRETNINGSOMGIVERDENBEDSTELYDGENGIVELSE 10. Lysnetledning placeres, så den ikke klemmes af gående eller af genstande placeret på eller ved dem. Pas især godt på ved stikket, stikdåser og dér hvor ledningen kommer ud af produktet. 11. Brug kun tilbehør/ekstraudstyr som anbefales af producenten. 12. Brug kun underlag, stand, trefod, vogn, beslag eller bord anbefalet af producenten eller som sælges SAMMENMEDPRODUKTET6EDBRUGAFVOGN UDVISES forsigtighed for at undgå skade ved væltning. 13. Lysnetledningen trækkes ud i tordenvejr eller når produktet skal stå ubenyttet gennem længere tid. 14. Al service henvises til autoriseret værksted. Service kræves ved skade på apparatet, lysnetledning eller stik, hvis væske eller fremmede genstande er trængt ind i produktet, hvis produktet har været udsat for regn eller anden fugt, hvis produktet ikke fungerer korrekt ved normal betjening eller hvis produktet udsættes for slag eller fald. 15. Produktet må ikke udsættes for dryp eller stænk. Genstande som indeholder væske, f.eks. vaser, må aldrig placeres på eller ved produktet. 16. For helt at afbryde forbindelse til lysnet, trækkes lysnetledningen ud af fatningen på apparatet. 17. Stikket på lysnetledningen skal altid være lettilgængeligt. 18. Batterier må ikke udsættes for ekstrem varme fra sol, ild eller lignende. Lynsymbol i trekant advarer brugeren om uisoleret ”farlig spænding” inde i apparatet som kan være kraftig nok til at udgøre risiko for elektrisk stød. Udråbstegn i trekant advarer brugeren om at der er vigtige instruktioner om betjening, vedligeholdelse og service i den medfølgende litteratur. !$6!23%,&ORATREDUCERERISIKOFORILDELLERELEKTRISKST’D MË apparatet ikke udsættes for regn eller fugt. 0198CSK - JBL On Air Control 2.4G Inlay.indb 8812/02/10 10:51:56 89 TAK FORDI DU VALGTE JBL I mere end 60 år har JBL været førende på alle områder indenfor ind- og afspilning af musik og film, fra liveoptræden til kontrollytning af de indspilninger som du nyder i hjemmet, i bilen, eller på arbejdspladsen. 6ISTOLERTRYGTPËATDIT*",SYSTEMVILINDFRIALLEDINEFORVENTNINGER og opfylde dine behov. Og næste gang du overvejer køb af lydudstyr til hjemmet, bilen eller arbejdspladsen, håber vi at du også til den tid vælger JBL. Brug et øjeblik på at registre re købet på www.jbl.com, så vi kan holde dig orienteret om de sidste nyheder hos JBL og få os en bedre for ståelse af vores kunder, så vi kan skabe produkter som opfylder dine ønsker og behov. JBL ® On Air Control ® 2.4G er et avanceret trådløst højttalersystem som kan bruges til at skabe musikglæde i den fjerneste ende af boligen eller som baghøjttalere i et surroundanlæg helt uden ledningsføring. For problemfri anvendelse, bør denne brugs vejledning læses grundigt inden tilslutning og ibrugtagning. UDPAKNING Systemet pakkes forsigtigt ud. Eventuel transportskade anmeldes straks til forhandler og/eller transportfirma. Emballage og indpakningsmateriale opbevares til eventuel senere brug. Du skal kontrollere at følgende er til stede: Indhold 1 x Sendermodul 1 x Universel strømforsyning til sender X6 BENS!#LEDNINGTILSENDERENSSTR’MFORSYNING X6 BENS!#LEDNINGTILSENDERENSSTR’MFORSYNING X6GBESLAGTILSENDERMEDXPANHEAD-XMASKINSKRUER til fæstning af beslag til sender 4 x Små runde selvklæbende fødder - til montering på senderens venstre sidepanel, hvis senderen skal monterens lodret 1 x Aktivhøjttaler/modtager (venstre kanal) 1 x Universel strømforsyning til aktiv højttaler/modtager X6 BENS!#LEDNINGTILAKTIVH’JTTALERMODTAGERS strømforsyning X6 BENS!#LEDNINGTILAKTIVH’JTTALERMODTAGERS strømforsyning X6GHOLDERTILAKTIVH’JTTALERMODTAGERSUNIVERSEL strømforsyning 1 x Passivhøjttaler (højre kanal) 2 x Drejelige vægbeslag til aktive og passive højttalere (opstramningsstang og ekstra ledninger medfølger) 1 x IR fjernbetjening 1 x Signalkabel (1 m phono - phono) 1 x Signalkabel (1 m phono - minijack) 10 m Højttalerkabel 1 x Brugsvejledning (flere sprog) 1 x US garantibevis Fjernbetjening 6ENSTRE Aktivhøjttaler (Bagside) Højre/ Passivhøjttaler (Bagside) RL ID CODE 1 2 3 4
   INPUT INPUTMUTE VOL     ID CODE 1 2 3 4 TO RIGHT SPEAKER +– +–
    LEFT-CHANNEL SPEAKER RIGHT-CHANNEL SPEAKER TO LEFT SPEAKER SUB-OUTLINE-IN DC 20V ID CODE 1 2 3 4 TO RIGHT SPEAKER +– +–
   LEFT-CHANNEL SPEAKER RIGHT-CHANNEL SPEAKER TO LEFT SPEAKER SUB-OUTLINE-IN DC 20V RL ID CODE 1 2 3 4
   INPUT INPUTMUTE VOL     RL ID CODE 1 2 3 4
   INPUT INPUTMUTE VOL     Trådløs Sender Dansk 0198CSK - JBL On Air Control 2.4G Inlay.indb 8912/02/10 10:51:57 90 TILSLUTNINGER Left Surround Channel Right Surround Channel Left Front Channel Subwoofer Right Front Channel Center Channel INPUT RL R L ID CODE 1 2 3 4 RECEIVER/PROCESSOR Surround Channel Preamp Outputs 2%#%)6%202/#%33/2 Figur 1. Trin 2. 6LGPLACERINGFORSURROUNDH’JTTALERNE Figur 2. Aktivhøjttaler placeres det anbefalede sted for venstre surroundhøjttaler. Left Surround Channel Right Surround Channel Left Front Channel Subwoofer Right Front Channel Center Channel Couch Noter: For overskueligheds skyld, bruges ordet “kilde” i denne vejledning i forbindelse med tilslutninger o…

Text truncated - open the document above for the full version.

Meiloon Industrial Co., Ltd. FCC ID.: R48CONTROL24GTXR No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, TaiwanTel : 886-33261611 Federal Communications Commission Dec. 02., 2013 Authorization and Evaluation Division ATTESTATION FCC ID: R48CONTROL24GTXR Product: Wireless Speaker System-Transmitter Model: CONTROL 2.4G We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, ----------------------------------------------------------------------------- Peter Pan / Electric Engineer Meiloon Industrial Co., Ltd.

Meiloon Industrial Co., Ltd. FCC ID.: R48CONTROL24GTXR No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan Tel : 886-33261611 Meiloon Industrial Co., Ltd. No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan Tel : 886-33261611 Fax: 886-33263884 Federal Communications Commission Dec. 02., 2013 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Schematics: (CONTROL 2.4G) Schem Block Diagram: (CONTROL 2.4G) BlkDia Operational Description: (CONTROL 2.4G) OPDes The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ---------------------------------------------------------------------------- Peter Pan / Electric Engineer Meiloon Industrial Co., Ltd.

Meiloon Industrial Co., Ltd. Declaration of Authorization We Name: Meiloon Industrial Co., Ltd. Address: No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan City: Taoyuan  . Country: Taiwan  . Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Wireless Speaker System-Transmitter FCC ID: R48CONTROL24GTXR Trademark: JBL on our behalf. Date:  2013/12/02  .. City:  Taoyuan  .. Name:  Peter Pan  .. (2) Function: Electric Engineer Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Report No.: 13A0200R-RFUSP42V01 Page : 1 of 12 ttachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 2 of 12 (3) EUT Photo (4) EUT Photo

Meiloon Industrial Co., Ltd. FCC ID.: R48CONTROL24GTXR No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, TaiwanTel : 886-33261611 FCC ID Label

Meiloon Industrial Co., Ltd. FCC ID.: R48CONTROL24GTXR No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, TaiwanTel : 886-33261611 The FCC ID will be placed on the equipment as shown in the photograph below.

Report No.: 13A0200R-RFUSP42V01 Page : 3 of 12 (5) EUT Photo (6) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 4 of 12 (7) EUT Photo (8) EUT Photo-Module Report No.: 13A0200R-RFUSP42V01 Page : 5 of 12 (9) EUT Photo (10) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 6 of 12 (11) EUT Photo (12) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 7 of 12 (13) EUT Photo (14) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 8 of 12 (15) EUT Photo (16) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 9 of 12 (17) EUT Photo (18) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 10 of 12 (19) EUT Photo (20) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 11 of 12 (21) EUT Photo (22) EUT Photo Report No.: 13A0200R-RFUSP42V01 Page : 12 of 12 (23) EUT Photo

Report No.: 13A0200R-RFUSP42V01 Page: 1 of 3 RF Exposure Evaluation declaration Product Name Wireless Speaker System-Transmitter Model No. CONTROL 2.4G FCC ID R48CONTROL24GTXR Applicant Meiloon Industrial Co., Ltd. Address No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan Date of Receipt Oct. 09, 2013 Date of DeclarationNov. 07, 2013 Report No. 13A0200R-RFUSP42V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF or any agency of the U.S. Government Report No.: 13A0200R-RFUSP42V01 Page: 2 of 3 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No.: 13A0200R-RFUSP42V01 Page: 3 of 3 1.3. Test Result of RF Exposure Evaluation Product : Wireless Speaker System-Transmitter Test Item : RF Exposure Evaluation Test Site : No.3 OATS Output Power Into Antenna & RF Exposure Evaluation Distance (2.06dBi): Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 19.4984 0.006233 Power density in column 4 is much lower than the limit (1 mW/cm 2 ).

Report No. 13A0200R-RFUSP42V01 Page : 1 of 44 FCC Test Report Product Name Wireless Speaker System-Transmitter Model No CONTROL 2.4G FCC ID. R48CONTROL24GTXR Applicant Meiloon Industrial Co., Ltd. Address No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan Date of Receipt Oct. 09, 2013 Issue Date Nov. 07, 2013 Report No. 13A0200R-RFUSP42V01 Report Version V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF or any agency of the U.S. Government Report No. 13A0200R-RFUSP42V01 Page : 2 of 44 Test Report Certification Issue Date: Nov. 07, 2013 Report No.: 13A0200R-RFUSP42V01 Product Name Wireless Speaker System-Transmitter Applicant Meiloon Industrial Co., Ltd. Address No.77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan Manufacturer Harman International Industries, Incorporated Model No. CONTROL 2.4G EUT Rated Voltage AC 100-240V, 50/60Hz EUT Test Voltage AC 120V/ 60Hz Trade Name JBL Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2012 ANSI C63.4: 2003, ANSI C63.10: 2009, KDB 558074 Test Result Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF or any agency of the U.S. Government Documented By : (Senior Adm. Specialist / Leven Huang ) Tested By : ( Engineer / Nowal Kuo ) Approved By : (Director / Vincent Lin) Report No. 13A0200R-RFUSP42V01 Page : 3 of 44 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................7 1.3. Tested System Details....................................................................................................................8 1.4. Configuration of Tested System ....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................11 2.4. Test Procedure .............................................................................................................................11 2.5. Uncertainty ..................................................................................................................................11 2.6. Test Result of Conducted Emission.............................................................................................12 3. Peak Power Output ...................................................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limits ..........................................................................................................................................14 3.4. Test Procedure .............................................................................................................................14 3.5. Uncertainty ..................................................................................................................................14 3.6. Test Result of Peak Power Output...............................................................................................15 4. Radiated Emission .....................................................................................................................16 4.1. Test Equipment............................................................................................................................16 4.2. Test Setup ....................................................................................................................................17 4.3. Limits ..........................................................................................................................................18 4.4. Test Procedure .............................................................................................................................18 4.5. Uncertainty ..................................................................................................................................18 4.6. Test Result of Radiated Emission................................................................................................19 5. RF antenna conducted test........................................................................................................23 5.1. Test Equipment...........................................................................................................…

Text truncated - open the document above for the full version.