R48V5BT14Bluetooth Speaker

V5 Safety Instructions & Warranty English Consumer Product Safety Guide: 1. Read these instructions. 2. Keep these instructions. 3. Follow all instructions. 4. Heed all warnings. 5. Water and Moisture • Do not use near water (bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement). 6. Ventilation • The unit should be situated so that its location or position does not interfere with its proper ventilation. • For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. • Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 7. Heat • The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 8. Power Sources • The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 9. Power Cable Protection • Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed on or against them. • It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 10. Cleaning • The unit should be cleaned only as recommended. • See the Maintenance section of this manual for cleaning instructions. 11. Objects and Liquid Entry • Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 12. Attachments • Do not use attachments not recommended by the product manufacturer. 13. Lightning and Power Surge Protection • Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 14. Overloading • Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 15. Servicing • The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. • Service methods not covered in the User Manual should be referred to Wren. The unit should be serviced by qualified service personnel when: • The power supply cable or plug has been damaged. • Objects have fallen into or liquid has been spilled into the enclosure. • The unit has been exposed to rain. • The unit has been dropped or the enclosure damaged. • The unit exhibits a marked change in performance or does not operate normally. 16. Antenna • Do not connect an external antenna to the Wren V5AP. 17. Periods of Non-Use • To prevent damage or corrosion, unplug the power cable from the speaker if the unit is to be left unused for an extended period of time, such as a month or longer. interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5GHz RF Device Statement (FOR 5GHz ONLY): 5.15 – 5.25GHz frequency band operation is restricted to indoor use only, Outdoor operations in the 5150~5250MHz is prohibited. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm (8 inches) between the radiator and your body. Note: The country code selection is for non-U.S. models only and is not available for all U.S. models. Per FCC regulation, all WiFi products marketed in the U.S. must be fixed to U.S. operating channels only (FOR 5GHz ONLY). 18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 19 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 20. Chemical Burn Hazard: Do not ingest the battery. 21. The remote control supplied with this product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. 22. Keep new and used batteries away from children. 23. If the battery compartment does not close securely, stop using the product and keep it away from children. 24. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 25. Do not expose the battery to excessive heat such as sunshine, fire or the like. 26. Do not handle leaking or damaged lithium batteries. 2 7. Risk of leakage. Only use the specified type of batteries. Never mix new and used batteries. Observe correct polarity. Remove batteries from products that are not in use for extended periods of time. Store batteries in a dry place. 28. Do not recharge non-rechargeable batteries.…

Text truncated - open the document above for the full version.

V5BT14 Setup Guide 2 Box Contents Power Supply Wren V5BT Speaker Wren V5BT Setup Guide V5BT Setup Guide Wren V5 Safety Instructions & Warranty AC Power Cord V5BT Safety Instructions & Warranty Remote Control (with Battery) English 3 Please check that the following are true: • Your source device is equipped with Bluetooth® 2.0 or higher. • You have your source device within range (32 ft. or less) of your V5BT. • The Bluetooth wireless feature on your source device is turned on. Before You Begin Setup 4 Powering On Your Wren V5BT Press power button. The power indicator will blink white until the system is ready. When the system is ready, the power indicator will remain white. solid white Connect AC power cord to power supply. Connect power supply to AC outlet. Connect power supply to power input on rear of speaker. The power indicator in the center of the power button will flash white for about 10 seconds, then turn off. English 5 Connections Setup Button Used to pair the V5BT with Bluetooth devices 3.5mm Aux Input Connects any audio source to your Wren V5BT via a 3.5mm audio cable Power Supply Input Connects to the power supply USB Charging Port Charges most smartphones and tablets. 6 Speaker Controls Volume Adjustment Indicator Indicates volume being adjusted. Source Selector Selects the desired audio input source. Bluetooth Indicator Indicates Bluetooth audio source is selected. Aux (3.5mm) Source Indicator Indicates aux audio source is selected. Power/Standby English 7 Remote Control Power Powers your Wren V5 on and off Source Selector Selects the desired audio input source Next Track Goes to the next audio track Volume Up Increases volume Play/Pause Plays and pauses audio Previous Track Goes to the previous audio track Mute/Unmute Mutes and unmutes the audio Shuffle Does not function on the V5BT Volume Down Decreases volume Repeat Does not function on the V5BT 8 Make sure your Bluetooth source device and the V5BT are both turned on and the Bluetooth mode is selected as the source on your V5BT. Press the setup button on the rear of your V5BT (Figure 1) until the Bluetooth source indicator blinks amber once every second (Figure 2). This will place the V5BT into “discoverable” mode. In the Bluetooth control section of your source device, place the source device into “discovery” mode. V5BT14_xxxxxx should appear on the list of devices that can be paired. Pairing occurs when two Bluetooth devices “communicate” with each other and create a connection. The Wren V5BT can “remember” the last six Bluetooth devices that have paired with it. For best results, have your Bluetooth source device near your V5BT. Note: Your V5BT will automatically enter pairing mode the first time you plug it in. The following directions are for all subsequent pairings. If you are setting up the speaker for the first time, start with step 3 below. Pairing with your V5BT blinking amber Figure 1Figure 2 English 9 Problem connecting? Visit wrensound.com/support for additional help. To play music on your Wren V5BT, make sure that Bluetooth is turned on and the V5BT14 has been selected on your source device. Then simply select your favorite music on your device and play. Select V5BT14_xxxxxx. If your source device asks for a passkey, enter “0000” (four zeros) and press “OK.” The Bluetooth indicator on the V5BT will blink amber two times per second when pairing is in progress (Figure 3). A message will appear on your source device to indicate when pairing is complete, In addition, the Bluetooth indicator on the V5BT will go from blinking amber to solid blue (Figure 4). You are now ready to play music wirelessly on your V5BT. Figure 3 • Pairing blinking amber Figure 4 • Connected solid blue 10 To pair additional devices with your V5BT, simply follow the instructions under “Pairing with your V5BT” on pages 8-9. When the Power button is pressed to turn the speaker on from Sleep or Standby mode, the V5BT will look for the most recently paired device that was connected to the speaker. If that device is available, the V5BT will reconnect to it. If the last paired device is not available, the V5BT will continue to search for the next most recently paired device. It will connect with the most recently paired device that it finds. When you wish to connect to a specific paired device, press and hold the Source button on the front of the speaker for three (3) seconds. The Bluetooth indicator will blink amber two times per second indicating that the V5BT is trying to connect to a paired device. Select V5BT14 on the source device. The Bluetooth indicator will change to solid blue when an active connection is established (Figure 5). Many households (and many individuals) have multiple Bluetooth-equipped devices that they use for music. The Wren V5BT can “remember” pairings with up to six different Bluetooth devices, eliminating the need to go through the initial pairing process every time you switch devices. Using multiple devices on your V5BT English 11 Problem connecting? Visit wrensound.com/support for additional help. To clear the V5BT’s memory of all paired devices, press and hold the Setup button on the rear of your V5BT and, while holding the Setup button, press the Power button on the front control panel. The Volume indicator will blink amber two times to indicate that the memory has been cleared. When the V5BT is powered on again, it will be in pairing mode and ready to pair with a Bluetooth device (see “Pairing with your V5BT” on pages 8-9). Note: After you have cleared your V5BT’s memory, you must delete the Wren speaker from your source device’s list of available Bluetooth devices before you can pair it with the V5BT again. To delete a previously paired Wren V5BT from your source device’s memory, follow the directions provided by the manufacturer. solid blue Figure 5 12 As with all Bluetooth pairings with audio devices, the volume control of your Wren V5BT functions as a “master” volume control. That means that the volume con…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6

V5BT14R48V5BT147190A-V5BT14 CAN ICES-3(B)/NMB-3(B) V5BT14-rUSC V5BT14R48V5BT147190A-V5BT14 CAN ICES-3(B)/NMB-3(B) V5BT14-bUSC

Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16

Report No.: SA140904D01A Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 150127D03 RF Exposure Report Report No.: SA140904D01A FCC ID: R48V5BT14 Test Model: V5BT14 Received Date: Jan. 27, 2015 Test Date: Mar. 10 ~ 11, 2015 Issued Date: Mar. 16, 2015 Applicant: Meiloon Industrial Co., Ltd. Address: No. 77, Lane 1775, Chuen-Ryh Road, Taoyuan City 330 Taiwan. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA140904D01A Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 150127D03 Table of Contents Release Control Record ............................................................................................................................. 3 1 Certificate of Conformity ................................................................................................................. 4 2 RF Exposure .................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) .......................................................................... 5 2.2 Mpe Calculation Formula ................................................................................................................ 5 2.3 Classification .................................................................................................................................. 5 3 Calculation Result Of Maximum Conducted Power ....................................................................... 6 Report No.: SA140904D01A Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 150127D03 Release Control Record Issue No. Description Date Issued SA140904D01A Original release. Mar. 16, 2015 Report No.: SA140904D01A Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 150127D03 1 Certificate of Conformity Product: Bluetooth Speaker Brand: WREN Test Model: V5BT14 Sample Status: Engineering sample Applicant: Meiloon Industrial Co., Ltd. Test Date: Mar. 10 ~ 11, 2015 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 16, 2015 Jessica Cheng / Senior Specialist Approved by : , Date: Mar. 16, 2015 Rex Lai / Assistant Manager Report No.: SA140904D01A Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 150127D03 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA140904D01A Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 150127D03 3 Calculation Result Of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2402 ~ 2480 -1.67 -0.29 20 0.0001 1 --- END ---

Report No.: RF140904D01A Page No. 1 / 42 Report Format Version: 6.1.1 Reference No.: 150127D03 FCC Test Report Report No.: RF140904D01A FCC ID: R48V5BT14 Test Model: V5BT14 Received Date: Jan. 27, 2015 Test Date: Mar. 10 ~ 11, 2015 Issued Date: Mar. 16, 2015 Applicant: Meiloon Industrial Co., Ltd. Address: No. 77, Lane 1775, Chuen-Ryh Road, Taoyuan City 330 Taiwan. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140904D01A Page No. 2 / 42 Report Format Version: 6.1.1 Reference No.: 150127D03 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 6 3.1 General Description of EUT ............................................................................................................ 6 3.2 Description of Test Modes .............................................................................................................. 7 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 9 3.3 Description of Support Units ..........................................................................................................11 3.3.1 Configuration of System under Test ...............................................................................................11 3.4 General Description of Applied Standards ......................................................................................11 4 Test Types and Results.................................................................................................................. 12 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 12 4.1.2 Test Instruments ........................................................................................................................... 13 4.1.3 Test Procedures ........................................................................................................................... 14 4.1.4 Deviation from Test Standard ........................................................................................................ 14 4.1.5 Test Set Up................................................................................................................................... 15 4.1.6 EUT Operating Conditions ............................................................................................................ 15 4.1.7 Test Results .................................................................................................................................. 16 4.2 Conducted Emission Measurement .............................................................................................. 23 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 23 4.2.2 Test Instruments ........................................................................................................................... 23 4.2.3 Test Procedures ........................................................................................................................... 24 4.2.4 Deviation From Test Standard ....................................................................................................... 24 4.2.5 Test Setup .................................................................................................................................... 24 4.2.6 EUT Operating Condition ......................................................................…

Text truncated - open the document above for the full version.

1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 2 RADIATED EMISSION TEST