R48V5USUniversal Wireless Speaker

V5 Safety Instructions & Warranty English Consumer Product Safety Guide: 1. Read these instructions. 2. Keep these instructions. 3. Follow all instructions. 4. Heed all warnings. 5. Water and Moisture • Do not use near water (bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement). 6. Ventilation • The unit should be situated so that its location or position does not interfere with its proper ventilation. • For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. • Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 7. Heat • The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 8. Power Sources • The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 9. Power Cable Protection • Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed on or against them. • It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 10. Cleaning • The unit should be cleaned only as recommended. • See the Maintenance section of this manual for cleaning instructions. 11. Objects and Liquid Entry • Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 12. Attachments • Do not use attachments not recommended by the product manufacturer. 13. Lightning and Power Surge Protection • Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 14. Overloading • Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 15. Servicing • The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. • Service methods not covered in the User Manual should be referred to Wren. The unit should be serviced by qualified service personnel when: • The power supply cable or plug has been damaged. • Objects have fallen into or liquid has been spilled into the enclosure. • The unit has been exposed to rain. • The unit has been dropped or the enclosure damaged. • The unit exhibits a marked change in performance or does not operate normally. 16. Antenna • Do not connect an external antenna to the Wren V5AP. 17. Periods of Non-Use • To prevent damage or corrosion, unplug the power cable from the speaker if the unit is to be left unused for an extended period of time, such as a month or longer. interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5GHz RF Device Statement: 5.15 – 5.25GHz frequency band operation is restricted to indoor use only, Outdoor operations in the 5150~5250MHz is prohibited. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm (8 inches) between the radiator and your body. Note: The country code selection is for non-U.S. models only and is not available for all U.S. models. Per FCC regulation, all WiFi products marketed in the U.S. must be fixed to U.S. operating channels only. 18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 19 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 20. Chemical Burn Hazard: Do not ingest the battery. 21. The remote control supplied with this product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. 22. Keep new and used batteries away from children. 23. If the battery compartment does not close securely, stop using the product and keep it away from children. 24. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 25. Do not expose the battery to excessive heat such as sunshine, fire or the like. 26. Do not handle leaking or damaged lithium batteries. 2 7. Risk of leakage. Only use the specified type of batteries. Never mix new and used batteries. Observe correct polarity. Remove batteries from products that are not in use for extended periods of time. Store batteries in a dry place. 28. Do not recharge non-rechargeable batteries. 29. Avoid exposure to extreme h…

Text truncated - open the document above for the full version.

V5US Setup Guide 2 Index Box Contents ...........................................3 Connections and Controls Back Panel Connections and Settings ..............................................4 Speaker Controls ......................................5 Remote Control ........................................6 Using the V5US Bass EQ .........................7 Getting Started Powering on your V5US ..........................8 Establishing a WiFi connection .............9 How to find what you need to know for your device ..........................10 Connecting and Using Your V5US Connect to your network using an Android TM device .......................11 Using the Play-Fi App on your Android or iOS device .............................15 Connect to your network using iOS devices with thePlay-Fi iOS App (recommended)........................................16 Using the Play-Fi iOS App to add more Play-Fi speakers to your network ..........20 Using AirPlay on your iOS device (iPad, iPhone, iPod Touch) .....................21 Connect to your network using a Mac or Windows® PC running iTunes ....22 Using AirPlay on your Mac or Windows computer ..................................25 Streaming to multiple V5US speakers with iTunes running on a Mac or Windows PC ..............................................25 Connect to your network using a PC running Windows 7 and higher ..............26 Using the special Play-Fi App for Windows 7 and higher.............................27 Connect to your network using WPS (if your router supports it) ......................28 Connect to your V5US using Bluetooth® .......................................30 Using Bluetooth ........................................33 Device Guide .............................................36 English 3 Box Contents Wren V5US Speaker Wren V5US Setup Guide V5US Setup Guide Wren V5US Safety Instructions & Warranty AC Power Cord Remote Control (with Battery) 4 Back Panel Connections and Settings Setup Button Used to enter various setup modes EQ Adjustment Adjusts bass output to compensate for speaker placement relative to room walls 3.5mm Aux Input Connects any audio source to your Wren V5US via a 3.5mm audio cable Reset Button Reboots speaker by cycling the power off and back on. AC Input Connects speaker to power outlet Service Port Used for firmware updates. AC INPUT 100-240 VOLT RESET EQ AUX INSETUP English 5 Speaker Controls Power/Standby Powers on and off the Wren speaker. White light indicates power is on; amber light indicates volume is muted. To turn on, press and release the Power button; to turn off, press and hold the Power button for seven seconds. Volume Up Increases the volume. Volume Adjustment Indicator Flashes to indicate volume being adjusted. Volume Down Decreases the volume. Wifi Indicator Indicates WiFi audio source is selected. Aux (3.5mm) Source Indicator Indicates Aux audio source is selected. Source Selector Selects the desired audio input source. Bluetooth Indicator Indicates Bluetooth audio source is selected. 6 Remote Control Power Powers your Wren V5 on and off Input Selector Buttons Selects the desired audio input source Volume Up Increases volume Play/Pause Plays and pauses audio Mute/Unmute Mutes and unmutes the audio Volume Down Decreases volume English 7 Volume Down Decreases volume Your V5US is equipped with a 3-position bass equalization (“EQ”) switch to compensate for room “boundary effects” on bass output. Room boundaries can change the sound of a speaker because its bass output is either amplified or diminished depending on how near the speaker is to the room’s walls, floor or ceiling. A speaker placed a good distance away from a room’s walls, floor or ceiling will be free from the amplifying effects of these boundaries. At the opposite end of the spectrum, a speaker placed in a corner on the floor or up near the ceiling will most likely have overwhelming and unnatural sounding bass output, assuming that its inherent bass output is powerful enough to begin with, as is the case with your V5US. We provide the Bass Adjustment EQ Selector, pictured below, to allow greater flexibility in room placement of your V5US. If your speaker is a good distance from any room boundaries, use the left-most setting. If your speaker is near a back wall, use the middle setting. Finally, if your speaker is in a corner, use the right-most setting. Of course, bass output is for many people a matter of personal taste. If the bass on your V5US seems too light for your taste — regardless of room position — you can make it heavier by moving the setting to the left. If the bass is too heavy — regardless of room position — you can make it lighter by moving the setting to the left. Free from boundaries In a corner Near a wall RESET EQ Using the V5US Bass EQ 8 AC INPUT 100-240 VOLT Powering on your Wren V5US Press power button. The power indicator will blink white until the system is ready. When the system is ready, the power indicator will remain white. solid white Connect power cord to AC outlet. Connect power cord to power input on rear of speaker. The power indicator in the center of the power button will flash white for about 10 seconds, then turn off. English 9 If you are using WiFi to connect (All wireless connection types except Bluetooth) If you are using WiFi to connect, please check that the following are true: • Your source device (smartphone, tablet, PC, etc.) is compatible. (For more information on compatible devices, visit wrensound.com/v5us/compatibility.) • You know your wireless network (WiFi) name and password. • Your wireless network is on and functioning properly. • Your Wren V5US speaker is located in an area with ample WiFi signal strength. ONCE YOUR V5US IS CONNECTED TO YOUR WIFI NETWORK, REGARDLESS OF HOW YOU CONNECTED IT, THE V5US WILL EASILY CONNECT WITH ALL OF THE WIFI- EQUIPPED SOURCE DEVICES THAT ARE ON THE SAME NETWORK AND COMPATIBLE WITH YOUR V5US provided you have the appropriate app installed. In other wo…

Text truncated - open the document above for the full version.

Declaration for no non-US channel operation November 10, 2014 We, Meiloon Industrial Co., LTD declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: R48V5US If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ------------------------------------ Peter Pan / Electric Engineer Meiloon Industrial Meiloon IndustrialMeiloon Industrial Meiloon Industrial Co., LTD Co., LTD Co., LTD Co., LTD Tel.: + 886-3-3261611*6314 Fax.: + 886-3-3263884 E-mail: [email protected] MEILOON INDUSTRIAL CO., LTD. NO. 77, LANE 1775 CHUEN-RYH ROAD, TAOYUAN CITY TAIWAN R.O.C. TEL:(886)3-3261611 FAX:(886)3-3263884

MEILOON INDUSTRIAL CO., LTD. NO. 77, LANE 1775 CHUEN-RYH ROAD, TAOYUAN CITY TAIWAN R.O.C. TEL:(886)3-3261611 FAX:(886)3-3263884 Date: 2014-11-10 FCC ID:R48V5US A UTHOR IZ A TION LE TTE R To whom it may concern: We, the undersigned, hereby authorize Amanda Wu / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu / Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------ Peter Pan / Electric Engineer Meiloon Industrial Co., LTD Meiloon Industrial Co., LTDMeiloon Industrial Co., LTD Meiloon Industrial Co., LTD Tel.: + 886-3-3261611*6314 Fax.: + 886-3-3263884 E-mail: [email protected]

MEILOON INDUSTRIAL CO., LTD. NO. 77, LANE 1775 CHUEN-RYH ROAD, TAOYUAN CITY TAIWAN R.O.C. TEL:(886)3-3261611 FAX:(886)3-3263884 Date: 2014-11-10 FCC ID:R48V5US To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Software Operational Description Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------ Peter Pan / Electric Engineer Meiloon Industrial Co., LTD Meiloon Industrial Co., LTDMeiloon Industrial Co., LTD Meiloon Industrial Co., LTD Tel.: + 886-3-3261611*6314 Fax.: + 886-3-3263884 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22

Report No.: SA140515D01 1 of 6 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA140515D01 MODEL NO.: V5US14 FCC ID: R48V5US RECEIVED: Jun. 26, 2014 TESTED: Sep. 10 ~ Oct. 8, 2014 ISSUED: Oct. 14, 2014 APPLICANT: MEILOON INDUSTRIAL CO., LTD ADDRESS: No. 77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA140515D01 2 of 6 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .......................................................................................... 4 2. RF EXPOSURE LIMIT .................................................................................. 5 3. MPE CALCULATION FORMULA ................................................................. 5 4. CLASSIFICATION ........................................................................................ 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ............... 6 Report No.: SA140515D01 3 of 6 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140515D01 Original release Oct. 14, 2014 Report No.: SA140515D01 4 of 6 Report Format Version 5.0.1 1. CERTIFICATION PRODUCT: Universal Wireless Speaker MODEL NO.: V5US14 BRAND: WREN APPLICANT: MEILOON INDUSTRIAL CO., LTD TESTED: Sep. 10 ~ Oct. 8, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Oct. 14, 2014 ( Jessica Cheng / Senior Specialist ) APPROVED BY : , DATE: Oct. 14, 2014 ( Rex Lai / Assistant Manager ) Report No.: SA140515D01 5 of 6 Report Format Version 5.0.1 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA140515D01 6 of 6 Report Format Version 5.0.1 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER Function FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) (Bluetooth EDR) 2402 ~ 2480 1.71 -0.29 20 0.0003 1.00 WLAN (2.4G) 2412 ~ 2462 22.45 2.79 20 0.0665 1.00 WLAN (5.0G) 5180 ~ 5240 13.42 6.62 20 0.0201 1.00 5260 ~ 5320 13.09 6.62 20 0.0186 1.00 5500 ~ 5700 13.04 6.62 20 0.0184 1.00 5745 ~ 5825 13.18 6.62 20 0.0190 1.00 CONCULSION: Both of the modules can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. BLUETOOTH + WLAN =0.0003 /1 + 0.0665 /1 = 0.0668 OR PIFA ANTENNA 1. WLAN (2.4G) + WLAN (5.0G BAND 1) = 0.0726/1 + 0.0051/1 = 0.0777 FREQUENCY BAND (MHz) MAX POWER (dBm) TOTAL POWER (dBm) POWER LIMIT (dBm) WIFI (2.4G) WIFI (5.0G) Bluetooth EDR 2400 22.45 - 1.71 22.49 30 5180 ~ 5240 - 13.42 - 13.42 30 5260 ~ 5320 - 13.09 - 13.09 30 5500 ~ 5700 - 13.04 - 13.04 30 5745 ~ 5825 - 13.18 - 13.18 30 2. WLAN (2.4G) + WLAN (5.0G BAND 4) = 0.0726/1 + 0.0168/1 = 0.0894 Therefore, the maximum calculation of this situation is 0.0894, which is less than the “1” limit. --- END ---

Report No.: RF140515D01-2 1 of 24 Report Format Version 5.0.0 DFS TEST REPORT REPORT NO.: RF140515D01-2 MODEL NO.: V5US14 FCC ID: R48V5US RECEIVED: Jun. 26, 2014 TESTED: Sep. 23, 2014 ISSUED: Oct. 14, 2014 APPLICANT: MEILOON INDUSTRIAL CO., LTD ADDRESS: No. 77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140515D01-2 2 of 24 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................. 3 1 CERTIFICATION .......................................................................................... 4 2 EUT INFORMATION .................................................................................... 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ......................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ........................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ......................... 5 2.4 EUT MAXIMUM AND MINIMUM CONDUCTED POWER ............................ 6 2.5 EUT MAXIMUM AND MINIMUM E.I.R.P. POWER ....................................... 7 2.6 TRANSMIT POWER CONTROL (TPC)........................................................ 8 2.7 STATEMENT OF MAUNFACTURER ........................................................... 8 3 U-NII DFS RULE REQUIREMENTS ............................................................ 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ................................... 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ................................ 10 4 TEST & SUPPORT EQUIPMENT LIST ...................................................... 13 4.1 TEST INSTRUMENTS ............................................................................... 13 4.2 DESCRIPTION OF SUPPORT UNITS ....................................................... 13 5 TEST PROCEDURE .................................................................................. 14 5.1 ADT DFS MEASUREMENT SYSTEM: ...................................................... 14 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: .................... 15 5.3 DEVIATION FROM TEST STANDARD ...................................................... 15 5.4 RADIATED TEST SETUP CONFIGURATION ............................................ 16 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE ...................................... 16 6 TEST RESULTS ......................................................................................... 17 6.1 SUMMARY OF TEST RESULTS ................................................................ 17 6.2 TEST RESULTS ......................................................................................... 18 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. ................................................................................ 18 6.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME ..... 19 6.2.3 NON- OCCUPANCY PERIOD ................................................................... 21 6.2.4 NON-ASSOCIATED TEST ......................................................................... 23 6.2.5 NON- CO-CHANNEL TEST ....................................................................... 23 7 INFORMATION ON THE TESTING LABORATORIES ............................... 24 Report No.: RF140515D01-2 3 of 24 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF140515D01-2 Original release Oct. 14, 2014 Report No.: RF140515D01-2 4 of 24 Report Format Version 5.0.0 1 CERTIFICATION PRODUCT: Universal Wireless Speaker MODEL: V5US14 BRAND: WREN APPLICANT: MEILOON INDUSTRIAL CO., LTD TEST SAMPLE: ENGINEERING SAMPLE TESTED: Sep. 23, 2014 STANDARDS: FCC Part 15, Subpart E (Section 15.407) KDB 905462 D02 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Oct. 14, 2014 ( Jessica Cheng / Senior Specialist ) APPROVED BY : , DATE: Oct. 14, 2014 ( Rex Lai / Assistant Manager ) Report No.: RF140515…

Text truncated - open the document above for the full version.

Report No.: RF140515D01-3 1 of 47 Report Format Version 5.0.1 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF140515D01-3 MODEL NO.: V5US14 FCC ID: R48V5US RECEIVED: Jun. 26, 2014 TESTED: Sep. 18 ~ Oct. 8, 2014 ISSUED: Oct. 14, 2014 APPLICANT: MEILOON INDUSTRIAL CO., LTD ADDRESS: No. 77, Lane 1775, Chuen-Ryh Road, Taoyuan City, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140515D01-3 2 of 47 Report Format Version 5.0.1 Table of Contents RELEASE CONTROL RECORD................................................................................. 4 1. CERTIFICATION .............................................................................................. 5 2. SUMMARY OF TEST RESULTS ...................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................... 6 3. GENERAL INFORMATION .............................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .............................................11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................ 12 4. TEST TYPES AND RESULTS ........................................................................ 13 4.1 CONDUCTED EMISSION MEASUREMENT .................................…

Text truncated - open the document above for the full version.