R5Y-EZWFM05-02802.11b/g WLAN Mini PCI Module

Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 1 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 2 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS Introduction The Eazix EZWFM05-02 is a wireless LAN adapter with miniPCI interface for mobile computing. It conforms to the IEEE 802.11g protocol and is backward-compatible with any installed 802.11b WLAN access point. It operates at 2.4 GHz and provides data rates of up to 54 Mbps for today’s high-bandwidth applications. The EZWFM05-02 Network Interface Card (NIC) is based on the Globespan Virata PRISM Javelin chipset. Features: • IEEE 802.11b/g compliant • Mini PCI host interface • Frequency range: 2412 MHz to 2484 MHz • 64-, 128-bit WEP encryptions • Data rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps • Modulation techniques: OFDM with BPSK, QPSK, 16QAM, 64QAM; DBPSK, DQPSK, CCK • Driver support for Microsoft Windows 98SE/ME/NT4/2000/XP 1 Installation Procedure 1.1 Installing the card into the host computer 1.1.1 Turn the host computer off, insert the WLAN card into the mini PCI slot, turn on the computer and start the Windows operating system (Windows XP preferred). 1.2 Installing the software drivers 1.2.1 When Windows detects new hardware and asks for drivers, point to the directory where the Globespan Virata (GSV) driver is located (SingleSource_Windows_Driver_Package_2.1.15.0) and look for the appropriate driver. 1.2.2 Run setup.exe within the PRISM_Basic_Options_Package_1.0.9.83 folder to install the utility and settings window. 1.2.3 Restart Windows. 2 Using the Settings window 2.1 The device should appear in the Device Manager list (Figure 2.1) when the card is inserted Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 3 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS Figure 2.1 Device Manager 2.2 The GSV WLAN icon will appear in the system tray at the bottom right of the screen (Figure 2.2) Figure 2.2 GSV icon Notes: The device name in the Device Manager list may not exactly appear as in Figure 2.1. The number after PRISM 802.11a/g Adapter (3886) # depends on the association of the driver with the device. Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 4 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS The GSV icon may not immediately appear as in Figure 2.2. It may show up as colored red or with a red X over it, if the device and software are not yet properly configured. Reminders: The Network Connection icon will appear in the system tray at the bottom right of the screen if the “Show icon in notification area when connected” option is checked in the General tab of the Wireless Network Connection Properties window (Figure 2.3) (Start -> Control Panel -> Network Connections -> Wireless Network Connection -> Properties -> General tab) Figure 2.3 The complete tabs of the GSV WLAN settings window will be shown if the “Use Windows to configure my wireless network settings” option is unchecked in the Wireless Networks tab of the Wireless Network Connection Properties window (Figure 2.4) Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 5 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS (Network Connection icon -> Properties -> Wireless Networks tab) Figure 2.4 2.3 Double-click the GSV icon to open the WLAN settings window (Figure 2.5) Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 6 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS Figure 2.5 WLAN Settings window 2.4 Click on the Status tab to display the connection status: State, Current Tx Rate, Current Channel, Tx and Rx Throughput, Link Quality and Signal Strength (Figure 2.5) 2.5 Click on the Configuration tab and place the required settings (Figure 2.6) 2.5.1 Type the Network Name Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 7 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS 2.5.2 Select the Network Type: Access Point or Peer-to-Peer 2.5.3 Save the Profile for later use Figure 2.6 Configuration tab 2.6 Click on the WEP tab and fill out with the necessary settings (Figure 2.7) 2.6.1 Select the required Encryption (WEP security) type: Disabled, 64 bit, 128 bit Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #…

Text truncated - open the document above for the full version.

Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 1 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS NOTICE TO THE USER: *This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *When this unit is placed inside of your host device, you must attach a label stating the following: "This device contains FCC ID: R5Y-EZWFM-5-02" to the outside of the final product. Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 2 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS Introduction The Eazix EZWFM05-02 is a wireless LAN adapter with miniPCI interface for mobile computing. It conforms to the IEEE 802.11g protocol and is backward-compatible with any installed 802.11b WLAN access point. It operates at 2.4 GHz and provides data rates of up to 54 Mbps for today’s high-bandwidth applications. The EZWFM05-02 Network Interface Card (NIC) is based on the Globespan Virata PRISM Javelin chipset. Features: • IEEE 802.11b/g compliant • Mini PCI host interface • Frequency range: 2412 MHz to 2484 MHz • 64-, 128-bit WEP encryptions • Data rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps • Modulation techniques: OFDM with BPSK, QPSK, 16QAM, 64QAM; DBPSK, DQPSK, CCK • Driver support for Microsoft Windows 98SE/ME/NT4/2000/XP 1 Installation Procedure 1.1 Installing the card into the host computer 1.1.1 Turn the host computer off, insert the WLAN card into the mini PCI slot, turn on the computer and start the Windows operating system (Windows XP preferred). 1.2 Installing the software drivers 1.2.1 When Windows detects new hardware and asks for drivers, point to the directory where the Globespan Virata (GSV) driver is located (SingleSource_Windows_Driver_Package_2.1.15.0) and look for the appropriate driver. 1.2.2 Run setup.exe within the PRISM_Basic_Options_Package_1.0.9.83 folder to install the utility and settings window. 1.2.3 Restart Windows. 2 Using the Settings window 2.1 The device should appear in the Device Manager list (Figure 2.1) when the card is inserted Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 3 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS Figure 2.1 Device Manager 2.2 The GSV WLAN icon will appear in the system tray at the bottom right of the screen (Figure 2.2) Figure 2.2 GSV icon Notes: The device name in the Device Manager list may not exactly appear as in Figure 2.1. The number after PRISM 802.11a/g Adapter (3886) # depends on the association of the driver with the device. Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 4 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS The GSV icon may not immediately appear as in Figure 2.2. It may show up as colored red or with a red X over it, if the device and software are not yet properly configured. Reminders: The Network Connection icon will appear in the system tray at the bottom right of the screen if the “Show icon in notification area when connected” option is checked in the General tab of the Wireless Network Connection Properties window (Figure 2.3) (Start -> Control Panel -> Network Connections -> Wireless Network Connection -> Properties -> General tab) Figure 2.3 The complete tabs of the GSV WLAN settings window will be shown if the “Use Windows to configure my wireless network settings” option is unchecked in the Wireless Networks tab of the Wireless Network Connection Properties window (Figure 2.4) Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 5 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS (Network Connection icon -> Properties -> Wireless Networks tab) Figure 2.4 2.3 Double-click the GSV icon to open the WLAN settings window (Figure 2.5) Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 6 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontrolled and unofficial unless directly viewed from Eazix eDMS Figure 2.5 WLAN Settings window 2.4 Click on the Status tab to display the connection status: State, Current Tx Rate, Current Channel, Tx and Rx Throughput, Link Quality and Signal Strength (Figure 2.5) 2.5 Click on the Configuration tab and place the required settings (Figure 2.6) 2.5.1 Type the Network Name Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700 Document #: R.EZWFM05-02.HW13.01 Title: EZWFM05-02 User Manual Page #: 7 of 18 COMPANY CONFIDENTIAL INFORMATION Copyright © 2004 Eazix, Inc. All rights reserved. Uncontr…

Text truncated - open the document above for the full version.

June 13, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re: EAZIX, Inc. FCC ID: R5Y-EZWFM04 Limited Modular Transmitter Approval Gentlemen: With regards to our application for equipment authorization of the Mini PCI module, listed below are the modular approval requirements with which the EUT complies: a. The modular transmitter has its own RF shielding. The shield is made of steel, tin coated. This is intended to ensure that the modules does not have to rely upon the shielding provided by the device into which it is installed in order for all modular coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. b. The modular transmitter has buffered modulation/data inputs to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. This is taken care of the Baseband Processor (BBP) chipset used. c. The modular transmitter has its own power supply regulation provided by voltage regulator ISL6414. This is intended to ensure that the module will comply with Part 15 requirements regardless of the power supplying circuitry in the device into which the module is installed. d. The modular transmitter complies with the antenna requirements or Section 15.203 and 15.204(c). The antenna employs a “unique” antenna coupler Mini PCB between the cable and the antenna, and a proprietary connector between the cable and the EUT. A single antenna, as described in the filing, is the only one currently approved for use with the EUT. e. The modular transmitter has been tested in a stand-alone configuration, i.e., the module was completely uncovered inside the host pc during testing. This demonstrates that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The transmitter module complies with the AC line conducted requirements found in Section 15.207. The antenna cable connected to the module does not contain ferrites. f. The modular transmitter is labeled with its own FCC ID number, and is marketed with and exterior label to be placed on the device into which the EUT is installed. Please see the example label. g. There are no specific rules or operating requirements applicable to the transmitter with respect to user operation. h. The modular transmitter complies with the applicable RF exposure requirements, as specified in Section 15.247. The EUT is a mobile device, and is not authorized for use in a laptop pc or PDA. The installation instructions state this, as well as cautioning the user to install and operate the EUT in such a way that a minimum 20 cm separation distance is maintained between the antenna and all persons during normal operation.

June 13, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re: EAZIX, Inc. FCC ID: R5Y-EZWFM05-02 Modular Transmitter Approval Gentlemen: With regards to our application for equipment authorization of the Mini PCI module, listed below are the modular approval requirements with which the EUT complies: a. The modular transmitter has its own RF shielding. The shield is made of steel, tin coated. This is intended to ensure that the modules does not have to rely upon the shielding provided by the device into which it is installed in order for all modular coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. b. The modular transmitter has buffered modulation/data inputs to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. This is taken care of the Baseband Processor (BBP) chipset used. c. The modular transmitter has its own power supply regulation provided by voltage regulator ISL6414. This is intended to ensure that the module will comply with Part 15 requirements regardless of the power supplying circuitry in the device into which the module is installed. d. The modular transmitter complies with the antenna requirements or Section 15.203 and 15.204(c). The antenna employs a “unique” antenna coupler Mini PCB between the cable and the antenna, and a proprietary connector between the cable and the EUT. A single antenna, as described in the filing, is the only one currently approved for use with the EUT. e. The modular transmitter has been tested in a stand-alone configuration, i.e., the module was completely uncovered inside the host pc during testing. This demonstrates that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The transmitter module complies with the AC line conducted requirements found in Section 15.207. The antenna cable connected to the module does not contain ferrites. f. The modular transmitter is labeled with its own FCC ID number, and is marketed with and exterior label to be placed on the device into which the EUT is installed. Please see the example label. g. There are no specific rules or operating requirements applicable to the transmitter with respect to user operation. h. The modular transmitter complies with the applicable RF exposure requirements, as specified in Section 15.247. The EUT is a mobile device. The installation instructions caution the user to install and operate the EUT in such a way that a minimum 20 cm separation distance is maintained between the antenna and all persons during normal operation.

September 9, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re: Eazix, Inc. FCC ID: R5Y-EZWFM05-02 731 Confirmation No.: TC551943 Correspondence Reference No.: 22312 Request for Tech. Info.: 08/10/05 Extension of Time Request Gentlemen: Transmitted herewith, on behalf of Eazix, Inc. is a request for a 30-day extension of time in regards to the FCC OET questions for the Eazix application (FCC ID: R5Y-EZWFM05-02). Eazix would like more time to respond to the modular approval inquiries. Should you have any questions or comments concerning the above, please contact the undersigned. cc: Eazix, Inc.

December 14, 2005 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Martin Perrine SUBJECT: EAZIX, Inc. FCC ID: R5Y-EZWFM05-02 731 Confirmation No.: TC551943 Correspondence Reference No.: 24534 Request for Tech. Info.: 11/15/2005 Dear Steven: Transmitted herewith, on behalf of EAZIX, Inc. is an amendment provided in response to the request for technical information dated November 15, 2005. 1. Please find attached the revised test report with the module tested outside of the host device. We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: EAZIX, Inc.

The modified manual will include the following revisions and clarifications prior to shipment of the EUT: 1. The statement below is intended for OEM: *When this unit is placed inside of your host device, you must attach a label stating the following: "This device contains FCC ID: R5Y-EZWFM05-02" to the outside of the final product. OEM instructions for end users can be found on the following statements. 2. In addition, OEM integrators must inform end user’s of the following: In order to comply with FCC RF exposure requirements, this device must be operated in such a way that a minimum 20cm separation distance is maintained between the antenna, located _______, and all persons, during normal operation. 3. Picture of the antenna to be sold with the device 2.4GHz Stubby Antenna BT-STUBBY™ Radiating element: Wire Frequency range: 2.45GHz Polarization: Linear Return loss: 2:1 Impedance: 50 ohms Cable/Connector: Reverse Polarity SMA Male Connector or Mini Coax Dimensions: straight: 32 x 8mm (incl SMA) : right-angle 34.5 x 8mm (excl SMA) Picture of antenna connected to EUT: Arnel G. Lampa Senior Division Manager Eazix, Inc Eazix, Inc. Unit 301 Plaz@ B, 6530 Northgate Avenue, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines 1700

Eazix FCC ID: RSY-EZWFM05-02 EUT Photographs © 2005 PCTEST Lab. 802.11 b/g WLAN Mini PCI Module NVLAP Lab Code: 100431-0

FCC and CE Label info of Description: 2412 to 2484 GHz; IEEE 802.11g WLAN Javelin miniPCI Module FCC ID: R5Y-EZWFM05-02 Brand Name: EAZIX Model No: EZWFM05-02 FCC and CE Label: Label material: Tamper evident 0.10 mm Synthetic w/ matte lamination. This material is durable, tamper proof and legible. Tamper proof: If the label is removed after 48 hours (time for the adhesive to cure) the material will have crumpled mark and some adhesive on the sticker will be peeled off. FRONT VIEW BACK VIEW

Eazix FCC ID: RSY-EZWFM05-02 EUT Photographs © 2005 PCTEST Lab. 802.11 b/g WLAN Mini PCI Module NVLAP Lab Code: 100431-0 Eazix FCC ID: RSY-EZWFM05-02 EUT Photographs © 2005 PCTEST Lab. 802.11 b/g WLAN Mini PCI Module NVLAP Lab Code: 100431-0 Eazix FCC ID: RSY-EZWFM05-02 EUT Photographs © 2005 PCTEST Lab. 802.11 b/g WLAN Mini PCI Module NVLAP Lab Code: 100431-0

PCTEST MPE REPORT FCC CERTIFICATION REPORT REVIEWED BY: QUALITY MANAGER Filename: 0505180385 Test Dates: May 18-20, 2005 EUT TYPE: 802.11b/g WLAN Mini PCI Module FCC ID: R5Y-EZWFM05-02 PAGE 1 OF 2 © 2005 PCTEST Engineering Laboratory, Inc. RF Exposure Evaluation - Maximum Permissible Exposure (MPE) 1. Introduction This document attempts to prove the safety of radiation generated by RF devices to the human body. The limit for Maximum Permissible Exposure (MPE), specified in FCC 1.1210, is listed below. The power generated by this product is measured by a power meter. Through use of the Friis transmission formula and the maximum gain of the antenna, the distance from the product at which compliance with the MPE limit is achieved may be calculated. Alternatively, near field measurements may be performed to demonstrate compliance at a specific measurement distance. Near field probe: Wandel & Goltermann EMR-20. 2. RF Exposure Limit According to FCC 1.1310: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b). LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits For Occupational / Control Exposures 30-300 61.4 .163 1.0 6 300-1500 ... ... F/300 6 1500-100,000 ... ... 5 6 (B) Limits For General Population / Uncontrolled Exposure 30-300 27.5 .073 .2 30 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. Friis Formula Friis transmission formula: Pd = (P out *G) / (4pr 2 ) Where: Pd = power density in mW/cm 2 (MPE limit) P out = output power to antenna in mW G = gain of antenna in linear scale p = 3.1416 r = distance between observation point and center of the radiator in cm Ref.: David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11.133) PCTEST MPE REPORT FCC CERTIFICATION REPORT REVIEWED BY: QUALITY MANAGER Filename: 0505180385 Test Dates: May 18-20, 2005 EUT TYPE: 802.11b/g WLAN Mini PCI Module FCC ID: R5Y-EZWFM05-02 PAGE 2 OF 2 © 2005 PCTEST Engineering Laboratory, Inc. 4. EUT Operating Condition Software provided by the client enabled the EUT to transmit and receive data at lowest, middle, and highest channels individually. 5. Climate Condition The temperature and relative humidity: 22°C and 78% RH 6. Measurement Results Frequency (MHz) Level (dBm) Measurement Distance Front MPE reading mW/cm 2 Rear MPE reading mW/cm 2 Right MPE reading mW/cm 2 Left MPE reading mW/cm 2 Limit 2412 14.62 20cm .010 .017 .011 .016 1. Data taken with all transmitters operating simultaneously 7. Conclusion The device meets the mobile 20cm separation distance as specified in Section 2.1091 of the FCC Rules. An appropriate RF exposure compliance statement will be placed in the user’s manual. * All data was taken with WLAN Channel 1 with 1 Mbps transmitting at full power.

© 2005 PCTEST Engineering Laboratory, Inc. PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE MANUFACTURER NAME & ADDRESS : DATE & LOCATION OF TESTING: EAZIX, INC. Date(s) of Tests: May 18-20 & Dec. 8, 2005 Unit 301 Plaz@ B, 6530 Northgate Avenue, Test Report S/N: 0505180384-R2 Filinvest Corporate City, Alabang, Test Site: PCTEST Lab, Columbia, MD Muntinlupa City, Philippines 1700 FCC ID: R5Y-EZWFM05-02 APPLICANT: EAZIX, INC. SUMMARY: Model No.: EZWFM05-02 Equipment EUT Type: 802.11b/g WLAN Mini PCI Module with Mini PCI Extender Card Max. Output Power: 14.62 dBm Peak Conducted (802.11b) 12.67 dBm Pak Conducted (802.11g) Frequency Range: 2412 - 2462 MHz (DSSS/OFDM) FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Parts 15.247; ANSI C-63.4-2001 Test Device Serial No.: S/N: 1 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C-63.4-2001. The EUT was tested with cover for the mini PCI access slot removed. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. 862. Spread Spectrum Transceiver (DSS), 15.247 PCTEST LAB TEST REPORT 15.247 FCC Measurement Report Reviewed by: Quality Manager Filename: 0505180384-R2 Test Dates: May 18-20 & December 8,2005 EUT Type: 802.11b/g WLAN Mini PCI Module with Mini PCI Extender Card FCC ID: R5Y-EZWFM05-02 Page i of i © 2005 PCTEST Engineering Laboratory, Inc. CONFIDENTIAL PROPERTY OF PCTEST TABLE OF CONTENTS ATTESTATION STATEMENTS.............................................................................................................................1 FCC 15.247 MEASUREMENT REPORT COVER PAGE............................................................................................2 1.0 INTRODUCTION............................................................................................................................................3 1.1 EVALUATION PROCEDURE........................................................................................................................................................3 1.2 SCOPE...........................................................................................................................................................................................3 1.3 PCTEST TEST LOCATION.............................................................................................................................................................3 2.0 PRODUCT INFORMATION...........................................................................................................................4 2.1 EQUIPMENT DESCRIPTION........................................................................................................................................................4 2.2 ENCLOSURE.................................................................................................................................................................................4 2.3 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS.......................................................................................................................4 3.0 DESCRIPTION OF TEST.................................................................................................................................5 3.1 CONDUCTED EMISSIONS..........................................................................................................................................................5 3.2 RADIATED EMISSIONS................................................................................................................................................................6 4.0 ANTENNA REQUIREMENTS..........................................................................................................................7 5.0 TEST EQUIPMENT CALIBRATION DATA.....................................................................................................8 EXHIBIT A. SUMMARY OF TEST RESULTS.................................................................................................................9 EXHIBIT A. 6dB BANDWIDTH MEAUREMENT (802.11B & 802.11G)...........................................................................10-15 EXHIBIT A. OUTPUT POWER MEASUREMENT (802.11B & 802.11G)...........................................................................16 EXHIBIT A. POWER SPECTRAL DENSITY (802.11B & 802.11G)...................................................................................17-22 EXHIBIT A. BANDEDGE (802.11B & 802.11G)............................................................................................................23-24 EXHIBIT A. RADIATED FUNDAMENTAL & HARMONIC MEASUREMENTS..................................................................25-30 EXHIBIT A. RADIATED SPURIOUS MEASUREMENTS.................................................................................................31 EXHIBIT A. RADIATED RESTRICTED BAND MEASUREMENTS...............…

Text truncated - open the document above for the full version.