R68OQ2200SWireless Module

To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Lantronix, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Lantronix, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: Wireless Module FCC ID: R68OQ2200S If you have any questions, please feel free to contact me Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Date: 6/24/2024 ___________________________ Signatory (Signature of the applicant)

To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7) (KDB 986446 D01 Covered Equipment) Lantronix, Inc. as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: FRN: 0010978799 Contact Person: Eric Bass Company Name: Lantronix, Inc. Company Address: 48 Discovery, Suite 250 Irvine, CA 92618 USA Email: [email protected] Sincerely yours, Date: 6/24/2024 Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: _______________________

Declaration of Authorization We Name: Lantronix, Inc. Address: 48 Discovery, Suite 250 Irvine, CA 92618 City: Irvine State: CA Country: USA Declare that Name Representative of agent: William Chung / Senior Director Agent Company name: Eurofins E&E Wireless Taiwan Co., Ltd. Address: No. 140-1, Changan Street, Bade District, City: Taoyuan Country: Taiwan Is authorized to apply for Certification of the following product(s) Product Name: Wireless Module FCC ID : R68OQ2200S IC : 3867A-OQ2200S Trademark: LANTRONIX on our behalf. This is valid until December 31, 2024, or until FCC and IC certification are completed, whichever comes sooner. Date: 6/24/2024 Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: Date: 6/24/2024 ___________________________ Signatory (Signature of the applicant)

Request for Confidentiality Date: 6/24/2024 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: R68OQ2200S Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: ☒ block diagrams ☐ tune-up information ☒ operational description ☐ software defined radio ☒ schematic diagrams ☒ security information ☐ parts list The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: ______________________ Date: 6/24/2024 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: R68OQ2200S To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920. - e.g., User Manual - e.g., External Photos - e.g., Internal Photos - e.g., Test Setup photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: ________________________

Date: 6/24/2024 UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: R68OQ2200S IC: 3867A-OQ2200S (1) DFS Device -- On DFS channels, the device always operates under the control of an AP. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. The device does not have Ad Hoc on “non-US frequencies” and/or on “DFS frequencies “. (2) Active / Passive Scanning, adhoc mode access point capability Frequency Band (MHz) Active Scanning (The device can transmit a probe (beacon) Passive scanning (Where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 5150-5250 MHz Yes No NO NO 5250-5350 MHz NO Yes NO NO 5470-5725 MHz NO Yes NO NO 5725-5850 MHz Yes No NO NO (3) Country code selection ability - No If no, pls explain how it was implemented: This function is disabled via firmware setting. Furthermore, the firmware that controls this is protected by a special signature and CRC checksum at the factory. Signature and CRC checksum will be calculated and verified before firmware upgrade. Unauthorized modification to firmware will lead to the failure of verification and thus firmware upgrade will not be allowed. (4) Meet 15.202 / RSS 247 requirement - ☑ Yes, No, pls check below: A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices ☑ A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, ☑ No Apply, ( If apply, pls help to provide explanation on it was implement, and how software was controlled) Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: ____________________________

Declaration of the Modular Approval Applicant / Grantee Lantronix, Inc. FCC ID: R68OQ2200S Model: Open-Q 2200 SIP The single module transmitter has been evaluated then tested meeting the requirements under Part 15C Section 2.12 as below: Modular approval requirement EUT Condition Comply (a) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The module contains a metal shield which covers all RF components and circuitry. The shield is located on the topside of the board. See photo provided with this application Yes (b) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. Data to the modulation circuit is buffered on the module; please refer to the operational description document filed with this application for full description Yes (c) The modular transmitter must have its own power supply regulation. The module contains its own power supply regulation and the rf reference oscillator is contained within the module. Please refer to the schematics and operational description documents filed with this application for full description Yes (d) The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the c able). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The modular transmitter connects to its antenna via a unique interface from an LGA pad to a dipole antenna. This connection interface has unique dimensions, specifications and parts provided in the integrators guide. Hence, it is a unique coupler. Yes (e) The modular transmitter must be tested in a stand-alone configuration, i.e., the Test data contained in this application is for the device tested as a stand-alone Yes module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to ensure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)) must not be inside another device during testing. device connected externally to a PC. See test set-up photographs filed with this application. (f) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. The module is appropriately labeled (refer to the label and label location drawings contained within this application). Information to the integrator of this device regarding the labeling requirements for the host system is contained in the instructions provided with the module Yes (g) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization requirements, which are based on the intended use/configurations. The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the integrator’s manual filed with this application. Yes (h) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. The module meets the requirements for a mobile/portable device that may be used at separation distances of more than 20cm from the human body. Refer to the RF Exposure test report submitted with this application Yes Date: 6/24/2024 Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: ___________________________

WIFI Channel 12 & 13 Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability for FCC ID : R68OQ2200S Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. _________________ Others Pls explain detail here. Date: 6/24/2024 Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: __________________

Model: Open-Q 2200 SIP PMN: Open-Q 2200 SIP Transmi Ʃer Module FCC and IC Label LocaƟon: ↑ Top view of Module with Label etched unto metallic shield ↑ ↑ Side view of Module with metallic shield ↑

MPE Evaluation Report for FCC Report No.: USSC237156001 Issue Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 12 Template: v01.00 MPE Evaluation Report for FCC Applicant Name : Lantronix, Inc. Applicant Address : 48 Discovery, Suite 250, Irvine, CA 92618 USA Product Name : Wireless Module Brand Name : LANTRONIX Model Number : Open-Q 2200 SIP FCC ID : R68OQ2200S Report Number : USSC237156001 Compliant Standards : FCC 47 CFR §2.1091 Sample Received Date : Jul. 24, 2023 Report Issue Date : Jul. 01, 2024 The above equipment has been tested by Eurofins E&E Wireless Taiwan Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Device Under Test (DUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s characteristics under the conditions specified in this report. Note: 1. The test results are valid only for samples provided by customers and under the test conditions described in this report. 2. This report shall not be reproduced except in full, without the written approval of Eurofins E&E Wireless Taiwan Co., Ltd. 3. The relevant information is provided by customers in this test report. According to the correctness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. Approved By： Roy Wu / SAR Technical Director MPE Evaluation Report for FCC Report No.: USSC237156001 Issue Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 12 Template: v01.00 Table of Contents Revision History ........................................................................................................................................................................... 3 1. Test Regulations .................................................................................................................................................................... 4 1.1. Reference Standard and Guidance .............................................................................................................................. 4 1.2. RF Exposure Limits ...................................................................................................................................................... 4 2. Information of Testing Laboratory ....................................................................................................................................... 6 3. DUT (Device Under Test) Information .................................................................................................................................. 7 3.1. Device Overview .......................................................................................................................................................... 7 4. Maximum Permissible Exposure (MPE) Assessment ......................................................................................................... 8 4.1. Introduction .................................................................................................................................................................. 8 4.2. Determination of Exemption for Low Power Devices ................................................................................................... 8 4.3. Standalone Maximum Permissible Exposure Evaluation ........................................................................................... 11 4.4. Total Exposure Ratio Evaluation for Simultaneous Transmission............................................................................... 12 MPE Evaluation Report for FCC Report No.: USSC237156001 Issue Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 12 Template: v01.00 Revision History Rev. Issue Date Description Revised by 00 Jul. 01, 2024 Initial release Rowan Hsieh MPE Evaluation Report for FCC Report No.: USSC237156001 Issue Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 4 of 12 Template: v01.00 1. Test Regulations 1.1. Reference Standard and Guidance The Maximum Permissible Exposure (MPE) evaluation documented in this report were performed in accordance with following FCC published KDB guidance and standard： 47 CFR Part 1.1307 47 CFR Part 1.1310 47 CFR Part 2.1091 KDB Publication 447498 D01 – General RF Exposure Guidance v06 KDB Publication 447498 D04 – Interim General RF Exposure Guidance v01 1.2. RF Exposure Limits According to 47 CFR §1.1310, for operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in below table, may be used instead of whole-body SAR limits to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b), except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. At operating frequencies above 6 GHz, the MPE limits listed in below table shall be used in all cases to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b). Limits for Maximum Permissible Exposure (MPE) to Radiofrequency Electromagnetic Fields Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) (i) Limits for Occupational / Controlled Exposure 0.3 – 3.0 614 1.63 *(100) ≤ 6 3.0 – 30 1842 / f 4.89 / f *(900 / f 2 ) < 6 30 – 300 61.4 0.163 1.0 < 6 300 – 1500 N/A N/A f / 300 < 6 1500 – 100000 N/A N/A 5 < 6 (ii) Limits for General Population / Uncontrolled Exposure 0.3 – 1.34 614 1.63 *(100) < 30 1.34 – 30 824 / f 2.19 / f *(180 / f 2 ) < 30 30 – 300 27.5 0.073 0.2 < 30 300 – 1500 N/A N/A f / 1500 < 30 1500 – 100000 N/A N/A 1.0 < 30 Notes: 1. f = frequency in MHz. * = Plane-wave equivalen…

Text truncated - open the document above for the full version.

Regulatory Antenna Information FCC ID: R68OQ2200S Model: Open-Q 2200 SIP WLAN & BT: Parameter Specification Manufacturer Taoglas Address 4851 Paramount Drive, San Diego, CA 92123 Part Number FXP830.07.0100C Peak Gain (on plastic*) 2.4GHz: 3.32dBi, 5.8GHz: 6.11dBi Average Gain (on plastic*) 2.4GHz: -3.0dBi, 5.8GHz: -0.7dBi Impedance 50 ohms Type Flexible Dipole Antenna Polarization Linear VSWR (free space) <4.5:1, 2400 – 2480, <2.25:1, 4900 - 5800 Frequency 2.4 ~ 2.5GHz, 4.9 ~ 5.8GHz Size 42mm x 7mm x 0.1mm Antenna Color Black with green logo and text Antenna Body Material Polymer Adhesive 3M double-sided tape Connector Height U.FL: 2.5mm Max. Cable Gray 100mm 1.37 co-axial Operating Temp -40 to +85 C For full specification, please refer to the antenna data sheet: FXP830.07.0100C.pdf. Antenna Drawing Radiation Pattern for FXP830.07.0100C Radiation Pattern for FXP830.07.0100C (XY Plane) Radiation Pattern for FXP830.07.0100C (XZ Plane) Contact Person / Title: Eric Bass / Vice President, Research & Development Tel.: (949) 453-7124 Email: [email protected] Signature: ______________________

RF Test Report Report No.: USRC237156001 Issued Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 86 Template : v01.00 RF Test Report Applicant ： Lantronix, Inc. Product Name ： Wireless Module Trade Name ： LANTRONIX Model Number ： Open-Q 2200 SIP Applicable Standard ： FCC 47 CFR PART 15 SUBPART C ANSI C63.10:2013 Received Date ： Jul. 24, 2023 Test Period ： Apr. 23, 2024 ~ May 10, 2024 Issued Date ： Jul. 01, 2024 Issued by Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan City 334025, Taiwan (R.O.C.) Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Frequency Range: 9 kHz to 325 GHz Bade test site： Test Firm Registration Number: 226252 Test Firm Designation Number: TW0010 Wugu test site： Test Firm Registration Number: 191812 Test Firm Designation Number: TW0034 Note: 1.The test results are valid only for samples provided by customers and under the test conditions described in this report. 2.This report shall not be reproduced except in full, without the written approval of Eurofins E&E Wireless Taiwan Co., Ltd. 3.The relevant information is provided by customers in this test report. According to the correctness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. RF Test Report Report No.: USRC237156001 Issued Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 86 Template : v01.00 Revision History Rev. Issued Date Description Revised by 00 Jul. 01, 2024 Initial Issue Abby Huang RF Test Report Report No.: USRC237156001 Issued Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 86 Template : v01.00 Verification of Compliance Applicant : Lantronix, Inc. Product Name : Wireless Module Trade Name : LANTRONIX Model Number : Open-Q 2200 SIP FCC ID : R68OQ2200S Applicable Standard : FCC 47 CFR PART 15 SUBPART C ANSI C63.10:2013 Test Result : Complied Performing Lab. : Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan City 334025, Taiwan (R.O.C.) Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Eurofins E&E Wireless Taiwan Co., Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by Eurofins E&E Wireless Taiwan Co., Ltd. based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved By ： RF Test Report Report No.: USRC237156001 Issued Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 4 of 86 Template : v01.00 TABLE OF CONTENTS 1 General Information ........................................................................................................ 5 1.1. Summary of Test Result ............................................................................................ 5 1.2. Testing Location ........................................................................................................ 6 1.3. Measurement Uncertainty ......................................................................................... 6 1.4. Test Site Environment................................................................................................ 6 2 EUT Description............................................................................................................... 7 3 Test Methodology ............................................................................................................ 9 3.1. Mode of Operation ..................................................................................................... 9 3.2. EUT Test Step ......................................................................................................... 10 3.3. Configuration of Test System Details ....................................................................... 11 3.4. Test Instruments ...................................................................................................... 13 4 Measurement Procedure ............................................................................................... 16 4.1. AC Power Line Conducted Emission Measurement ................................................ 16 4.2. Radiated Emission Measurement ............................................................................ 18 4.3. Maximum Conducted Output Power Measurement ................................................. 21 4.4. 6 dB RF Bandwidth Measurement ........................................................................... 22 4.5. Maximum Power Spectral Density Measurement .................................................... 23 4.6. Out of Band Conducted Emissions Measurement ................................................... 24 4.7. Antenna Measurement ............................................................................................ 25 5 Test Results ................................................................................................................... 26 5.1. Conducted Emission ............................................................................................... 26 5.2. Conducted Test Results ........................................................................................... 28 5.3. Radiated Emission Measurement ............................................................................ 29 Appendix A. Test Data Appendix B. Test Plots Appendix C. Test Setup Photographs RF Test Report Report No.: USRC237156001 Issued Date: Jul. 01, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 5 of 86 Template : v01.00 1 General Information 1.1. Summary of Test Result Standard Item Result Remark …

Text truncated - open the document above for the full version.

Appendix A:Test Data Duty cycle 802.11b241212.23212.31299.3500.0280.010 802.11g24122.0342.06698.4510.0680.010 802.11n HT2024121.8941.92698.3390.0730.010 802.11n HT4024220.9310.97995.0970.2181.074 802.11n VHT2024121.9061.93898.3490.0720.010 802.11n VHT4024220.9390.98795.1370.2171.065 1/T Minimun VBW (kHz) Mode Frequency (MHz) On time (ms) On+off time (ms) Duty cycle (%) Duty Factor (dB) RF Test Report Report No.: USRC237156001 Eurofins E&E Wireless Taiwan Co., Ltd.Page 1 of 7 2.4 GHz Band Ant-0 802.11b116.50 802.11b616.50 802.11b1117.50 802.11g116.50 802.11g616.50 802.11g1116.50 802.11n HT20116.50 802.11n HT20616.50 802.11n HT201116.00 802.11n HT40315.50 802.11n HT40615.50 802.11n HT40914.50 802.11n VHT20116.50 802.11n VHT20616.50 802.11n VHT201116.00 802.11n VHT40315.50 802.11n VHT40615.50 802.11n VHT40914.50 QRCT/4.0.209.0 Mode Freq. (MHz) CH 2412 2437 2462 2412 2437 2412 2462 2412 2437 Test SW Version 2437 2452 2422 2437 2462 2422 RF power setting in Test SW 2437 2462 2452 RF Test Report Report No.: USRC237156001 Eurofins E&E Wireless Taiwan Co., Ltd.Page 2 of 7 ModeChannel Freq. (MHz) Data Rate 802.11b124121M 802.11b624371M 802.11b1124621M 802.11g124126M 802.11g624376M 802.11g1124626M 802.11n HT20124126.5M 802.11n HT20624376.5M 802.11n HT201124626.5M 802.11n HT403242213.5M 802.11n HT406243713.5M 802.11n HT409245213.5M 802.11n VHT2012412MCS0 802.11n VHT2062437MCS0 802.11n VHT20112462MCS0 802.11n VHT4032422MCS0 802.11n VHT4062437MCS0 802.11n VHT4092452MCS0 2.4 GHz Band Config RF Test Report Report No.: USRC237156001 Eurofins E&E Wireless Taiwan Co., Ltd.Page 3 of 7 2.4 GHz Band Avg Conducted Power (dBm) Peak Conducted Power (dBm) Conducted Power Limit (dBm) Ant-0Ant-0Ant-0 802.11b116.3617.3130.00 802.11b616.6117.4230.00 802.11b1117.6918.5430.00 802.11g116.0918.6430.00 802.11g616.3218.9930.00 802.11g1116.2118.5930.00 802.11n HT20116.0518.7130.00 802.11n HT20616.1818.9030.00 802.11n HT201115.5218.2830.00 802.11n HT40315.8217.5130.00 802.11n HT40615.9517.9130.00 802.11n HT40914.5016.2630.00 802.11n VHT20116.0818.7530.00 802.11n VHT20616.2218.9330.00 802.11n VHT201115.6118.3330.00 802.11n VHT40315.8517.5430.00 802.11n VHT40615.9817.9430.00 802.11n VHT40914.5916.3430.00 2412 2462 2437 Freq. (MHz) 2412 2422 Mode 2462 2437 2412 2437 CH 2422 2437 2452 2462 2437 2462 2437 2412 2452 RF Test Report Report No.: USRC237156001 Eurofins E&E Wireless Taiwan Co., Ltd.Page 4 of 7 6 dB Bandwidth 6 dB Bandwidth (kHz) Ant-0 802.11b24128574≧ 500 802.11b24378593≧ 500 802.11b24628598≧ 500 802.11g241215470≧ 500 802.11g243715730≧ 500 802.11g246215750≧ 500 802.11n VHT20241215170≧ 500 802.11n VHT20243716100≧ 500 802.11n VHT20246216380≧ 500 802.11n VHT40242235810≧ 500 802.11n VHT40243735170≧ 500 802.11n VHT40245235190≧ 500 Mode Freq. (MHz) 6 dB Bandwidth Min.Limit (kHz) RF Test Report Report No.: USRC237156001 Eurofins E&E Wireless Taiwan Co., Ltd.Page 5 of 7 99 % Occupied BW 99 % Occupied BW (MHz) Ant-0 802.11b241213.711 802.11b243713.923 802.11b246214.071 802.11g241216.851 802.11g243717.056 802.11g246217.130 802.11n VHT20241217.923 802.11n VHT20243718.130 802.11n VHT20246218.233 802.11n VHT40242236.587 802.11n VHT40243736.610 802.11n VHT40245236.435 Freq. (MHz) Mode RF Test Report Report No.: USRC237156001 Eurof…

Text truncated - open the document above for the full version.