R68XPICO600Wi-Fi & Bluetooth Module

Lantronix, Inc. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) Grantee code: R68 To whom it may concern, Lantronix, Inc. as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Company Name: Lantronix, Inc. Company US Address: 48 Discovery, Suite 250, California, United States 92618 Contact Person: Steve Burrington Email: [email protected] Telephone number: 9494533990 FRN: 0010978799 Sincerely yours, Name: Steve Burrington Title: Vice President, Global Research & Development Email: [email protected] Date: 19 March 2026

Lantronix, Inc. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: March 19, 2026 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: R68XPICO600 To whom it may concern, Lantronix, Inc. certifies that the equipment for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) Applicant certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, ________________________ Contact Person: Steve Burrington Title: Vice President, Research & Development E- mail: [email protected]

Rev. 1/1/03 Lantronix, Inc. Date: March 19, 2026 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: R68XPICO600 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Part List Schematics Block Diagram Operation Description Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ Contact Person: Steve Burrington Title: Vice President, Global Research & Development E- mail: [email protected]

Lantronix, Inc. Date: March 19, 2026 Power of Attorney To whom it may concern, Please be notified that I, Steve Burrington, have designated Jim Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jim Tsai in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C 862. This authorization is limited to the product of as following: FCC ID: R68XPICO600 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, ____ Contact Person: Steve Burrington Title: Vice President, Global Research & Development E- mail: [email protected]

1/1 Lantronix, Inc. Date: March 19, 2026 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : R68XPICO600 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test set-up photos  Users Manual The application contains technical information, which Lantronix, Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, ____ Contact Person: Steve Burrington Title: Vice President, Global Research & Development E- mail: [email protected]

Applicant/Grantee Lantronix, Inc. FCC ID: R68XPICO600 Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio portion of this module is shielded, please see exhibition external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The module has buffer modulation/data inputs. Y 3 The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. Please see the schem.pdf Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the Test Report exhibition. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Please refer to the Setup Photo exhibition for the stand-alone test configuration. Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The Module will be labeled with its own FCC ID, and the instruction on the labeling rule of the end product has been stated in the User Manual of this module. Please refer to the Label and User Manual exhibition. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the User Manual. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Y _________________________________ Contact Person: Steve Burrington E- mail: [email protected] Date: 19 March 2026

Label location: It’s on the shield

Sporton International Inc. (Kunshan) Page Number : 1 of 8 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA612610 RF Exposure Evaluation Report APPLICANT : Lantronix, Inc. EQUIPMENT BRAND NAME : : Wi-Fi & Bluetooth Module LANTRONIX MODEL NAME : xPico 600 FCC ID : R68XPICO600 STANDARD : 47 CFR Part 2.1091 FCC KDB 447498 D01 V06 The product evaluation date was started from Mar. 17, 2026 and completed on Mar. 17, 2026. We, Sporton International Inc. (Kunshan), would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) Page Number : 2 of 8 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA612610 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT TUNE UP POWER AMONG PRODUCTION UNITS ....................... 6 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 5.1. Standalone Power Density Calculation ............................................................................................. 8 5.2. Collocated Power Density Calculation ............................................................................................... 8 Sporton International Inc. (Kunshan) Page Number : 3 of 8 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA612610 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA612610 Rev. 01 Initial issue of report. Mar. 31, 2026 Sporton International Inc. (Kunshan) Page Number : 4 of 8 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA612610 1. Administration Data 1.1. Testing Laboratory Sporton International Inc. (Kunshan) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.02. Testing Laboratory Test Firm Sporton International Inc. (Kunshan) Test Site Location No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China TEL : +86-512-57900158 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. SAR01-KS CN1257 314309 Applicant Company Name Lantronix, Inc. Address 48 Discovery, Suite 250 Irvine, CA 92618 USA Manufacturer Company Name Lantronix, Inc. Address 48 Discovery, Suite 250 Irvine, CA 92618 USA Sporton International Inc. (Kunshan) Page Number : 5 of 8 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA612610 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Wi-Fi & Bluetooth Module Brand Name LANTRONIX Model Name xPico 600 FCC ID R68XPICO600 Wireless Technology and Frequency Range WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.3GHz Band: 5260 MHz ~ 5320 MHz WLAN 5.5GHz Band: 5500 MHz ~ 5720 MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz Bluetooth: 2402 MHz ~ 2480 MHz Mode WLAN 2.4GHz : 802.11b/g/n/ax HT20/HE20 WLAN 5GHz : 802.11a/n HT20 WLAN 5GHz 802.11ac/ax VHT20/HE20 Bluetooth LE Antenna Gain <Ant 1/2> WLAN2.4GHz: 0.2 dBi WLAN 5.2GHz: -0.7 dBi WLAN 5.3GHz: -0.8 dBi WLAN 5.5GHz: -1.2 dBi WLAN 5.8GHz: -1.5 dBi Bluetooth: 0.2 dBi Antenna Type WLAN: Dipole Antenna Bluetooth: Dipole Antenna EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Comments and Explanations: 1. The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 2. The maximum RF output tune up power, antenna gain also the safe distance used for evaluate RF exposure were declared by manufacturer. Sporton International Inc. (Kunshan) Page Number : 6 of 8 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA612610 3. Maximum RF average output tune up power among production units <2.4GHz WLAN > Mode Maximum Average Power (dBm) Ant 1 Ant 2 2.4GHz 802.11b 20.00 20.00 802.11g 19.00 19.00 802.11n-HT20 19.00 19.00 802.11ax-HE20 19.00 19.00 <WLAN 5GHz> Mode Maximum Average Power (dBm) Ant 1 Ant 2 5.2GHz 802.11a 20.00 20.00 802.11n-HT20 20.00 20.00 802.11ac-VHT20 20.00 20.00 802.11ax-HE20 20.00 20.00 5.3GHz 802.11a 20.00 20.00 802.11n-HT20 20.00 20.00 802.11ac-VHT20 20.00 20.00 802.1111ax-HE20 20.00 20.00 5.5GHz 802.11a 19.00 19.00 802.11n-HT20 19.00 19.00 802.11ac-VHT20 19.00 19.00 802.1111ax-HE20 19.00 19.00 5.8GHz 802.11a 19.00 19.00 802.11n-HT20 19.00 19.00 802.11ac-VHT20 19.00 19.00 802.1111ax-HE20 19.00 19.00 <Bluetooth> Mode…

Text truncated - open the document above for the full version.

Product OC: YEBT038WFA Version: 0.1 Date: 2026-01-26 Status: Released Product Name: External Wi-Fi/BT Antenna Key Features: Frequency band: 2400–2500 MHz, 5150–5850 MHz, 5925–7125 MHz Peak efficiency: 50.12 % Dimensions: Φ13 mm × 195 mm RoHS Compliant Antenna Datasheet Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 1 / 36 Overview Quectel Wi-Fi/BT antenna covers BT, 2.4 GHz, 5 GHz, and up to 7 GHz bands, fully satisfying customers’ requirements for BT, Wi-Fi 5, Wi-Fi 6, and Wi-Fi 6E/Wi-Fi 7. There are various antenna types, including built-in FPC/PCB antenna, ceramic patch antenna, and other external antennas of different shapes or sizes. The antenna performance meets the customers’ demands for efficiency, gain, and radiation and ensures the superior experience of the customers’ products in use. Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 2 / 20 Contents Overview ...................................................................................................................................................... 1 Contents ...................................................................................................................................................... 2 1 Specification ........................................................................................................................................ 3 1.1. Electrical ..................................................................................................................................... 3 1.2. Mechanical & Environmental ..................................................................................................... 4 2 Drawing ................................................................................................................................................ 5 3 Detailed Performance ......................................................................................................................... 6 3.1. S-Parameter Test ....................................................................................................................... 6 3.1.1. VSWR ............................................................................................................................ 6 3.1.2. Return Loss .................................................................................................................... 8 3.2. Radiation Performance Test ....................................................................................................... 9 3.2.1. Efficiency ........................................................................................................................ 9 3.2.2. Average Gain ............................................................................................................... 10 3.2.3. Peak Gain .....................................................................................................................11 3.2.4. 3D & 2D Radiation Pattern .......................................................................................... 12 3.2.4.1. Test Condition: Free Space ................................................................................. 12 4 Packaging .......................................................................................................................................... 15 Contact Us................................................................................................................................................. 17 Legal Notices ............................................................................................................................................ 18 Revision History ....................................................................................................................................... 20 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 3 / 20 1 Specification Test Condition: Free Space 1.1. Electrical Electrical Frequency Range 2400–2500 MHz, 5150–5850 MHz, 5925–7125 MHz Impedance 50 Ω Polarization Linear Radiation Pattern Omni-directional Antenna Type Dipole Band Freq. (MHz) Specification Wi-Fi 2G BT Wi-Fi 5G Wi-Fi 6G 2400–2483 5150–5250 5250–5350 5470–5725 5725–5850 5925–7125 Max. VSWR 2.0 2.8 2.8 2.7 2.4 2.3 Max. Return Loss (dB) -9.3 -6.6 -6.4 -6.7 -7.6 -8.0 AVG Eff. (%) 40.6 40.6 38.6 33.8 28.7 33.4 AVG. AVG Gain (dB) -4.0 -3.9 -4.1 -4.7 -5.4 -4.8 Max. Peak Gain (dBi) 0.2 （2460MHz） -0.7 （5155MHz） -0.8 （5260MHz） -1.2 （5480MHz） -1.5 （5820MHz） 1.6 （6915MHz） VSWR ≤ 2.8 Return Loss ≤ -6.4 dB Peak Gain ≤ 1.6 dBi Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 4 / 20 1.2. Mechanical & Environmental Mechanical Antenna Dimensions Φ13 mm × 195 mm Material & Color TPEE & Black Connector Type RP SMA Male Mounting Type Terminal Weight Typ. 18 g Environmental Operation Temperature -40 °C to +85 °C Storage Temperature -40 °C to +85 °C RoHS Compliant Yes Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 5 / 20 2 Drawing Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 6 / 20 3 Detailed Performance ⚫ Network Analyzer: Keysight E5071C (Device number: QTB6331E; Calibration date: 2025-07-04; Due date: 2027-01-03) ⚫ Chamber: OTA RayZone 2800 GTS (Device number: QTA0709; Calibration date: 2025-07-14; Due date: 2027-07-13) ⚫ Testing Software: Libra ⚫ Test Engineer: Damon Zhang ⚫ Manufacturer: Quectel Wireless Solutions (Changzhou) Co., Ltd. Address: No.8 Nanhu West Road, Wujin District, Changzhou City, Jiangsu Province, China 3.1. S-Parameter Test 3.1.1. VSWR 1 2 3 4 5 6 7 8 9 10 200022002400260028003000320034003600380040004200440046004800500052005400560058006000620064006600680070007200 VSWR Frequency(MHz) VSWR Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 7 / 20 VSWR Frequency (MHz) 2400 2450 2480 2500 5150 5155 5250 5260 5350 VSWR 2.0 1.7 1.5 1.4 2.5 2.5 2.8 2.8 2.8 Frequency (MHz) 5470 5480 5725 5820 5850 5925 6325 6725 6915 VSWR 2.7 2.7 2.0 2.4 2.4 2.3 1.6 1.3 1.1 Frequency (MHz) 7125 VSWR 1.7 Antenna Services YEBT03…

Text truncated - open the document above for the full version.

Sporton International Inc. (Kunshan) Page Number : 1 of 20 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 FCC DFS Test Report Report No. : FZ612610 DYNAMIC FREQUENCY SELECTION DFS Test Report APPLICANT : Lantronix, Inc. EQUIPMENT : Wi-Fi & Bluetooth Module BRAND NAME : LANTRONIX MODEL NAME : xPico 600 FCC ID : R68XPICO600 STANDARD : FCC Part 15 Subpart E CLASSIFICATION : (NII) Unlicensed National Information Infrastructure TEST DATE(S) : Mar. 13, 2026 We, Sporton International Inc. (Kunshan), would like to declare that the tested sample has been evaluated in accordance with the procedures and shown to be compliant with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) Page Number : 2 of 20 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 FCC DFS Test Report Report No. : FZ612610 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF DYNAMIC FREQUENCY SELECTION TEST .......................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ........................................................................................................................................... 5 1.2 Manufacturer ..................................................................................................................................... 5 1.3 Feature of Equipment Under Test .................................................................................................... 5 1.4 Product Specification of Equipment Under Test ............................................................................... 5 1.5 Modification of EUT .......................................................................................................................... 5 1.6 Testing Site ....................................................................................................................................... 6 1.7 Applied Standards ............................................................................................................................ 6 1.8 Support Unit used in test configuration and system ......................................................................... 6 2 REQUIREMENTS AND PARAMETERS FOR DFS TEST .......................................................................... 7 2.1 Summary of Dynamic Frequency Selection Test ............................................................................. 7 2.2 Applicability of DFS Requirements ................................................................................................... 8 2.3 Interference Threshold values, Master or Client incorporating In-Service Monitoring ..................... 9 2.4 DFS Response requirement values .................................................................................................. 9 2.5 Short Pulse Radar Test Waveforms ............................................................................................... 10 3 CALIBRATION SETUP AND DFS TEST RESULTS ................................................................................ 11 3.1 Calibration of Radar Waveform ...................................................................................................... 11 3.2 In-Service Monitoring: Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period ................................................................................................................... 13 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 19 5 MEASUREMENT UNCERTAINTY ............................................................................................................ 20 APPENDIX A. SETUP PHOTOGRAPHS Sporton International Inc. (Kunshan) Page Number : 3 of 20 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 FCC DFS Test Report Report No. : FZ612610 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FZ612610 Rev. 01 Initial issue of report Mar. 31, 2026 Sporton International Inc. (Kunshan) Page Number : 4 of 20 TEL : +86-512-57900158 Report Issued Date : Mar. 31, 2026 FCC ID : R68XPICO600 Report Version : Rev. 01 FCC DFS Test Report Report No. : FZ612610 SUMMARY OF DYNAMIC FREQUENCY SELECTION TEST UNII Bandwidth and Channel Description Measured Limit Result U-NII-2A 5250-5350MHz & UNII Band 2C 5470-5725MHz 20MHz (CH100) 5500MHz Channel Move Time 955.232ms 10 sec Pass Channel Closing Transmission time <200ms + 6.4ms (aggregate) 200 ms + aggregate of 60 ms over remaining 10 s period Pass Non-Occupancy Period and Client Beacon Test No transmission or Beacons occurred 30 minutes Pass Note: Since the product is client without radar detection function, only Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period Test are required to be performed. Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limi…

Text truncated - open the document above for the full version.