RAD169HSDPA/UMTS dual band / GSM four bands mobile phone

2 1 345678910 Your cellphone 1 ................ Keys and connectors 1.1 Status icons GPRS connected GPS is on GPRS in use Receiving location data from GPS GPRS is disabled Speakerphone is on EDGE connected Roaming EDGE in use No signal EDGE is disabled No SIM card installed 3G connected Vibrate mode 3G in use Ringer is silenced 3G is disabled Cellphone microphone is mute HSPA (3G+) connected Battery is very low HSPA (3G+) in use Battery is low HSPA(3G+) is disabled Battery is partially drained Connected to a Wi-Fi network Battery is full Bluetooth is on Battery is charging Connected to a Bluetooth device Headset connected Airplane mode Signal strength Alarm is set Bluetooth headset battery level indicator English - CJB31R1ALAAA On Home screen, press to quickly access • Settings menu or Notification panel; to launch quick search; to customize your Home screen by adding applications or changing wallpaper/theme.On other screens, press to view options list. • Press: Light up the screenReturn to the Home screen or back to the central Home screen if it is extended. When screen turns dark, the Home key will blink when there is missed call, incoming message or events reminder alert. Press & hold: Enter the recently used applications list.Go back to the previous menu or screen.Press: End a callLock the screenLight up the screen Press & hold: When cellphone is off, power on the cellphone. When cellphone is on, enter cellphone options: Silent mode, Airplane mode, Power off. Press to adjust the Volume (in call/media playing mode)Open Search bar for searching within an application, the cellphone or web. Notification icons New Gmail message More notifications are hidden New text or multimedia message Call in progress (green) Problem with text or multimedia message delivery Call in progress using Bluetooth headset (blue) New Google Talk message Missed call New voicemail Call on hold Upcoming event Call forwarding is on Data is synchronizing Uploading data Problem with sign-in or synchronization Downloading data microSD card is full Download finished No microSD card installed An open Wi-Fi network is available Connected to VPN Cellphone is connected via USB cable Disconnected from VPN Radio is on Song is playing System update available USB tethering on Portable Wi-Fi hotspot on Both USB tethering and portable hotspot on Getting started 1.2 Set-up 1.2.1 Removing or installing the back coverInserting or removing the SIM cardYou must insert your SIM card to make phone calls. Please power off your cellphone and remove battery before inserting or removing the SIM card.Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out.Installing and removing the MicroSD cardTo release the microSD card holder, slide it in the direction of the arrow and lift it. Then insert the microSD card with the golden contact downward. Finally, turn down the microSD holder and slide it in the opposite direction to lock it. Reposition Touch and hold the item to be repositioned to activate the Move mode, drag the item to desired position, then release. Hold the icon on the left or right edge of the screen to drag the item to another Home screen page.RemoveTouch and hold the item to be removed to activate the Move mode, drag the item to the top of the Application tab, which will then turn red, and release.Wallpaper customizationTouch and hold an empty area or press Menu key and touch Wallpaper on the Home screen to customize wallpaper.Theme customizationTouch and hold an empty area or press Menu key and touch Themes on the Home screen to customize themes. Application tab 1.3.6 Touch from Home screen to enter applications list. To return to the Home screen, press Home key. Consult recently-used applicationsTo consult recently-used applications, you can press and hold the Home key from Home screen. Touch an icon in the window to open the related application. Volume adjustment 1.3.7 You can set ringer, media and cellphone ringtone volume to your preference by Volume up/down key, or Settings menu. The MicroSD card may contains some third part applications. Installing or removing the battery Insert and click the battery into place, then close the cellphone cover. • Unclip the cover, then remove the battery. • Charging the battery Connect the battery charger to your cellphone and outlet respectively. To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. Applications list 1.4 The Applications list contains all pre-embedded and newly installed applications.To access the Applications list, touch Application tab from Home screen. To return to Home screen, press Home key. Normal mode and sort mode 1.4.1 Applications can be managed in two modes. To switch between two modes, press Menu key from applications list screen, and touch Switch view . Normal mode (default)All applications are listed in alphabetical order.Sort modeAll applications are sorted by several categories. Categories management 1.4.2 (1) There are 8 categories in total: 5 categories is predefined, 3 categories can be added.Press Menu key, and select Edit to enter edit mode. Within edit mode you can now customize categories. Text input 2 ........................ Using Onscreen Keyboard 2.1 Onscreen keyboard will display automatically when a program requires entering text or numbers.Onscreen keyboard settingsPress Menu key from Home screen, select Settings\Language & keyboard\TouchPal Input (or Android keyboard ), a series of settings are available for your selection. You could scroll the keyboard to change keyboard style. Power on your cellphone 1.2.2 Hold down the Power key until the cellphone powers on. It will take some seconds before the screen lights up.Set up your cellphone for the first timeThe …

Text truncated - open the document above for the full version.

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 Date 2011-4-11 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: TMC (Telecommunication Metrology Center of MIIT) is authorized to act on our behalf, until otherwise notified, for applications to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Gong Zhizhou Approval Team Leader TCT Mobile Limited

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 6/13/2011 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: RAD169 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou Gong Approval Team Leader TCT Mobile Limited

EUT photograph

EUT Label Location

EUT Interior photograph

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 218 of 226 ANNEX I: The EUT Appearances and Test Configuration a: EUT b: Battery Picture 8: Constituents of EUT TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 219 of 226 Picture 9: Left Hand Touch Cheek Position Picture 10: Left Hand Tilt 15 Degree Position TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 220 of 226 Picture 11: Right Hand Touch Cheek Position Picture 12: Right Hand Tilt 15 Degree Position TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 221 of 226 Picture 13: Body, The EUT display towards ground, the distance from handset to the bottom of the Phantom is 15mm Picture 14: Body, The EUT display towards phantom, the distance from handset to the bottom of the Phantom is 15mm 15mm 15mm TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 222 of 226 Picture 15: Body with earphone, The EUT display towards ground, the distance from handset to the bottom of the Phantom is 15mm Picture 16: Body, the EUT display towards ground, the distance from handset to the bottom of the Phantom is 10mm 15mm 10mm TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 223 of 226 Picture 17: Body, the EUT display towards phantom, the distance from handset to the bottom of the Phantom is 10mm Picture 18: Left edge, the distance from handset to the bottom of the Phantom is 10mm 10mm 10mm TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 224 of 226 Picture 19: Right edge, the distance from handset to the bottom of the Phantom is 10mm Picture 20: Top edge, the distance from handset to the bottom of the Phantom is 10mm 10mm 10mm TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 225 of 226 Picture 21: Bottom edge, the distance from handset to the bottom of the Phantom is 10mm 10mm TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 226 of 226 ANNEX J: Schematic Diagram of Antenna c: Schematic Diagram of Antenna

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 1 of 226 TESTING No. L2264 OET 65 TEST REPORT Product Name HSDPA/UMTS dual band / GSM four bands mobile phone Model Brandy Lite A Marketing Name one touch 908A FCC ID RAD169 Client TCT Mobile Limited TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 2 of 226 GENERAL SUMMARY Product Name HSDPA/UMTS dual band / GSM four bands mobile phone Model Brandy Lite A FCC ID RAD169 Report No. RZA1105-0800SAR Client TCT Mobile Limited Manufacturer TCT Mobile Limited Reference Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radiofrequency Electromagnetic Fields, 3 kHz to 300 GHz. IEEE Std 1528™-2003: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. SUPPLEMENT C Edition 01-01 to OET BULLETIN 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions. KDB 941225 D06 Hot Spot SAR v01 SAR Evaluation Procedures for Portable Devices with Wireless Router Capabilities Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: June 3 rd , 2011 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Shen Chen TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 3 of 226 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the Test Report.......................................................................................................5 1.2. Testing Laboratory ................................................................................................................ 5 1.3. Applicant Information ............................................................................................................ 6 1.4. Manufacturer Information ...................................................................................................... 6 1.5. Information of EUT................................................................................................................ 7 1.6. The Maximum SAR 1g Values and Conducted Power of each tested band ........................... 8 1.7. Test Date .............................................................................................................................. 9 2. Operational Conditions during Test ............................................................................................ 10 2.1. General Description of Test Procedures............................................................................. 10 2.2. GSM Test Configuration ...................................................................................................... 10 2.3. WCDMA Test Configuration ................................................................................................ 11 2.3.1. Output Power Verification ............................................................................................ 11 2.3.2. Head SAR Measurements ........................................................................................... 11 2.3.3. Body SAR Measurements ........................................................................................... 11 2.4. HSDPA Test Configuration .................................................................................................. 11 2.5. WIFI Test Configuration ...................................................................................................... 14 2.6. Test Positions...................................................................................................................... 15 2.6.1. Against Phantom Head ................................................................................................ 15 2.6.2. Body Worn Configuration............................................................................................. 15 3. SAR Measurements System Configuration ................................................................................ 16 3.1. SAR Measurement Set-up .................................................................................................. 16 3.2. DASY4 E-field Probe System ............................................................................................. 17 3.2.1. EX3DV4 Probe Specification ....................................................................................... 17 3.2.2. E-field Probe Calibration .............................................................................................. 18 3.3. Other Test Equipment .........................................................................................................18 3.3.1. Device Holder for Transmitters .................................................................................... 18 3.3.2. Phantom...................................................................................................................... 19 3.4. Scanning Procedure........................................................................................................... 19 3.5. Data Storage and Evaluation .............................................................................................. 21 3.5.1. Data Storage..........................................................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 181 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 182 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 183 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 184 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 185 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 186 of 226 ANNEX E: D835V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 187 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 188 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 189 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 190 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 191 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 192 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 193 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 194 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 195 of 226 ANNEX F: D1900V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 196 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 197 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 198 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 199 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 200 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 201 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 202 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 203 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 204 of 226 ANNEX G: D2450V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 205 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 206 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 207 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 208 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 209 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 210 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 211 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 212 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 213 of 226 ANNEX H: DAE4 Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 214 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 215 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 216 of 226 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1105-0800SAR Page 217 of 226

TEST REPORT No. 2011TAR278 for TCT Mobile Limited HSDPA/UMTS dual band / GSM four bands mobile phone Model Name: Brandy Lite A Marketing Name：one touch 908A FCC ID: RAD169 with Hardware Version: PIO Software Version: V61S Issued Date: May 31, 2011 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. DGA-PL-114/01-02 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629A-1 TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Tel:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No.2011TAR278 Page2 of 82 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER (§22.913(A)/§24.232(B)) ................................................................................ 11 A.2 EMISSION LIMT (§2.1051/§22.917§24.238) ............................................................................. 18 A.3 CONDUCTED EMISSION (§15.107§15.207) ............................................................................. 23 A.4 FREQUENCY STABILITY (§2.1055/§24.235) ........................................................................... 30 A.5 OCCUPIED BANDWIDTH (§2.1049(H)(I)) ................................................................................. 32 A.6 EMISSION BANDWIDTH (§22.917(B)/§24.238(B)) .................................................................. 44 A.7 BAND EDGE COMPLIANCE (§22.917(B)/§24.238(B)) ............................................................. 56 A.8 CONDUCTED SPURIOUS EMISSION (§2.1057/§22.917/§24.238) ............................................ 62 No.2011TAR278 Page3 of 82 1. Test Laboratory 1.1. Testing Location Company Name: TMC Beijing, Telecommunication Metrology Center of MIIT Address: 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China Postal Code: 100191 Telephone: 00861062304633 Fax: 00861062304793 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: May 17, 2011 Testing End Date: May 31, 2011 1.4. Signature Zi Xiaogang (Prepared this test report) Sun Xiangqian (Reviewed this test report) Lu Bingsong Deputy Director of the laboratory (Approved this test report) No.2011TAR278 Page4 of 82 2. Client Information 2.1. Applicant Information Company Name: TCT Mobile Limited Address /Post: 5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 City: Shanghai Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 2.2. Manufacturer Information Company Name: TCT Mobile Limited Address /Post: 5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 City: Shanghai Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 No.2011TAR278 Page5 of 82 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description HSDPA/UMTS dual band / GSM four bands mobile phone Model Name Brandy Lite A Marketing Name one touch 908A FCC ID RAD169 Frequency GSM 850MHz; PCS 1900MHz; WCDMA Band II; WCDMA Band V Antenna Internal Power supply Battery or Charger (AC Adaptor) Output power 31.4 dBm maximum ERP measured for GSM850 Extreme vol. Limits 3.5VDC to 4.2VDC (nom…

Text truncated - open the document above for the full version.

No.2011TAR279 Page1 of 59 ©Copyright. All rights reserved by TMC Beijing. TEST REPORT No. 2011TAR279 for TCT Mobile Limited HSDPA/UMTS dual band / GSM four bands mobile phone Model Name: Brandy Lite A Marketing Name：one touch 908A FCC ID: RAD169 with Hardware Version: PIO Software Version: V61S Issued Date: May 31, 2011 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. DAT-P-114/01-01 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629A-1 TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology Shouxiang Science Building, No 51, Xueyuan Road, Haidian District, Beijing, P.R.China 100191 Tel:+86(0)10-62304633-2678, Fax:+86(0)10-62304793 Email:[email protected]. www.emcite.com No.2011TAR279 Page2 of 59 ©Copyright. All rights reserved by TMC Beijing. CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER (§22.913(A)/§24.232(B)) ........................................................................... 11 A.2 EMISSION LIMT (§2.1051/§22.917§24.238) ............................................................................. 15 A.3 CONDUCTED EMISSION (§15.107§15.207) ............................................................................. 20 A.4 FREQUENCY STABILITY (§2.1055/§24.235) .......................................................................... 27 A.5 OCCUPIED BANDWIDTH (§2.1049(H)(I)) ............................................................................... 29 A.6 EMISSION BANDWIDTH (§22.917(B)/§24.238(B))................................................................ 33 A.7 BAND EDGE COMPLIANCE (§22.917(B)/§24.238(B)) .......................................................... 3…

Text truncated - open the document above for the full version.