RAD175GSM dual bands mobile phone

1 You r ce llp hone 1.1 Keys N avigationkey ( 1) Confirman option(press the middleof the key) Access“Changeti ming”(longkey pre ssin idle scr een) A ns wer Se nd a call Acc ess call mem or y (Redial) (shortkeypr ess) Switch on/S witch off the cellphone(longkey pr ess) End call Returnto the idle screen Left softkey Rightsoft key Acc ess yourvoicemail(longkeypr ess) In edit mod e - Shortkeypress:accessthe languagelist - Lon g keypress: ente r zero F ro m id le screen - Shortkeypress:* - Lon g keypress: lock/unlockthe ke ypad In edit mod e: - Shortkeypress:change inputmethods - Lon g keypress: accessthe Symbolstabl e Fro m id le screen - Shortkeypress:# - Lon g keypress: activate/deactivate the vibrat or In edit mod e: - Shortkeypress:(space) - Lon g keypress: add a word Fro m id le screen - Shortkeypress:dial ‘5’ - Lon g keypress: switch on/offthe to rch 8 Settings......... ......... Fro m the mainmenu,selectthe iconme nuand selectthe func tion of yo ur ch oicein or dertocustomizeyourcell pho ne: Colo r, Display,Cl ock, Keys, Call register (1) ,More settings. 9 Too ls ............. ........... 9.1 Calend ar Once youenterthismenufrom“Tools”, thereis a mo nth ly-view calendar for you to keeptrackof importantmeetings , appointments, etc. Dayswitheventsente red will be markedin color. 9.2 Alarm Your ce llphonehas a built-inala rm clockwi th a snoozefeature. 9.3 Calculator Hold do wn thekey to ge t the dec imal point.Confirmwiththe key or the left softkey. 9.4 Fake ca ll Prot ect yourselffromannoying situationswiththe “Fa ke Call”. In this menu,youcanset“Callername/number”, “Ca ll time”, “Ring tone” and “Image”. Whenthe ti merreac hes the cellphonewill ring and displaylike receiving a real phonecall. Press(Lef t sof tkey) key , pretendanswering a cal l, the screenwill displayjust like havean ongo ing call .Presskey, pretendreject th e call, the call will terminate automatically. 9.5 Converter Unit converterand Currencyconverter. 1.2 Idle scr een icons B at tery charg e lev el. Vibra tion alert: yourcellphonevibrates,but neitherrings nor beeps. Headset connected. Call forwardingact ivate d: yourcallsare forwarded . Alarm clock programmed. Voicem ail messagearriv ed. F M rad io is on. Una nswe red calls. WAP alerts ( 1) . GPRS attached. GPRS connecting. Roaming. L in e switchi ng ( 1) : indicatesthe selectedline . Level of networ k reception. S ilenc e mode: yourcel lphoneneither rin gs, be eps nor v ibrates. Message unread. Keypad locked. 2 Gettingstar ted ............ 2.1 Se t-u p Removingand installingthe back cover In stallingand removingthe battery I nsertingan d removingthe SIM Card Place the SIM car d withthe chipfac ing downwards and slid e it int o it s h ousing.Makesur e thatit is correctlyinserted.To removethe car d, pressit and slid e it out. 9.6 Voice memo Thisfeatureen abl es youto re cor d a callby selecting“So und recorder” while communicating.To recorda sound, select“Voi ce memo”, then“New record”. 9.7 Memorystatus It will ind icatehowmuc h spac e is usedand howmuchis curr entlyfree on yourcellphone. 9.8 My sho rtcuts Accessthe shortcutsalr eadyprogrammed. To programme new sho rtcuts:sele ct “Add” if you wantto createa quickaccess to functions , numbers,or wapbookmarks,etc. 9.9 Flashlight To lig ht in da rkness,youmay activate“Flas hligh t” by belowoperations: In idle screen,long keypresskey to acti vate the Torchlight;sel ectoff or go backto idl e scre en the n longkeypresskey to deactivateit. 10 Fun .... ............ .......... 10.1 Gam es Yo ur Alcatelcellphonemayincludesomegames.Youco uld se t backgroundmus ic and vibr ationalert. 10.2FM radio Yourcel lphoneis equippedwithan FM radio (1) with RDSfunctionality. You can use the appl icati on as a traditionalFM radiowithautomatic tun in g and savedchannelsor withparallelvisualinformation relat ed to the radi o programon the di sp lay, if you tuneto stationsthat offerVisual Radioservice.You can listento it while runningotherapplications . C harging the bat ter y Co nnectthe batterychargerto yourcel lpho ne and mainssocket r especti vely • The chargingmay takeabout20 mi nutesto start if the batteryis flat. • Be carefulnot to forcethe plugintothe socket. • Makesurethe batteryis co rrec tly insertedbef ore connectingthe charger. • The mainssock et mustbe nearto the ce llphone and eas il y accessible ( avoidel ectricextensioncables). • Whenusin g yo ur cellphone for the firs t time,ch argethe batteryfu lly (approximately3 hours).You are advisedto full y cha rge the batt ery ( ). • To red uce powerco nsumption and energywaste,whenbatteryis fullycharged, di sconnect yourchargerfro m the plu g; reducethe b ackli ght time,etc. The chargeis complete whenthe animationstops. 2.2 Po wer on your cellphone Hold downthekey untilthe cellphonepowers on. 2.3 Po wer off your cellphone Hold downthekey fromthe idle screen. 11 File ma nager ...... .... You wi ll ha ve an accessto all audioand visualfiles storedin cellphone in File manager. 11.1 My audio s Choos e an audiofor an inco mingcall, a messagealert,poweron/off ringtoneor contactID. 11.2 My imag es You can selectan imageas wall paper,ON/OFFscreenor contact ID. 11.3 Unkno wn files Storefiles of unsupportedformat. 11.4 Memorystatus See 9. 7 on page10. 12 Services........ .......... Co ntactyo ur networkoperatorto checkservice availability. 13 Pro fil es ...... .......... .... With this menu,you ma y personalize ringt onesfor differenteventsand env ironments. 3 Calls .... .. .......... ............ .. 3.1 Makinga call Dia l the desirednumber thenpres s thekey (sendkey) to place the call. If you makea mistake,you can deletethe incorrect di gits by pre ssing t he right softkey. To hangup the call, pressthekey. Making an em ergencycall If yourcellphone is coveredby the net work,dia l emer ge ncy number and pressthekey (s end key) to makean emergencycall. Thisworks e ven withouta SIM cardand withouttyp ing the PIN codeor unlocking the key pad ( 1) . 3.2 Calling your voicemail (1) To ac cessyourvoicem…

Text truncated - open the document above for the full version.

Declaration of USB Port One touch 214A, use a mini-USB port in handset. This USB port support charging and headset, but don’t support data transmission function. Signature: Print name: 吴云林 Date: 2011-4-11 Company: TCT Mobile Limited

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 3/22/2011 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: RAD175 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou Gong Approval Team Leader TCT Mobile Limited

EUT photograph

EUT Label Location

EUT Interior photograph

No.2011SAR00023 Page 1 of 103 ©Copyright. All rights reserved by TMC Beijing. SAR TEST REPORT No. 2011SAR00023 For TCT Mobile Limited GSM dual bands mobile phone Mikko GPRS US one touch 214A With Hardware Version: Proto Software Version: E02 FCCID: RAD175 Issued Date: 2011-04-01 No. DGA-PL-114/01-02 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: TMC Beijing, Telecommunication Metrology Center of MIIT No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2079, Fax:+86(0)10-62304793 Email:[email protected]. www.emcite.com No.2011SAR00023 Page 2 of 103 TABLE OF CONTENT 1 TEST LABORATORY..................................................................................................................3 1.1 TESTING LOCATION........................................................................................................................................ 3 1.2 TESTING ENVIRONMENT................................................................................................................................. 3 1.3 PROJECT DATA............................................................................................................................................... 3 1.4 SIGNATURE..................................................................................................................................................... 3 2 CLIENT INFORMATION..............................................................................................................4 2.1 APPLICANT INFORMATION.............................................................................................................................. 4 2.2 MANUFACTURER INFORMATION..................................................................................................................... 4 3 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................5 3.1 ABOUT EUT ................................................................................................................................................... 5 3.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST.......................................................................... 5 3.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST............................................................................. 5 4 CHARACTERISTICS OF THE TEST ..........................................................................................5 4.1 APPLICABLE LIMIT REGULATIONS.................................................................................................................. 5 4.2 APPLICABLE MEASUREMENT STANDARDS...................................................................................................... 6 5 OPERATIONAL CONDITIONS DURING TEST ..........................................................................6 5.1 SCHEMATIC TEST CONFIGURATION................................................................................................................. 6 5.2 SAR MEASUREMENT SET-UP.......................................................................................................................... 6 5.3 DASY4 E-FIELD PROBE SYSTEM..................................................................................................................... 7 5.4 E-FIELD PROBE CALIBRATION........................................................................................................................ 8 5.5 OTHER TEST EQUIPMENT...............................................................................................................................9 5.6 EQUIVALENT TISSUES................................................................................................................................... 10 5.7 SYSTEM SPECIFICATIONS.............................................................................................................................. 10 6 CONDUCTED OUTPUT POWER MEASUREMENT................................................................. 11 6.1 SUMMARY.................................................................................................................................................... 11 6.2 CONDUCTED POWER.................................................................................................................................... 11 7 TEST RESULTS ........................................................................................................................12 7.1 DIELECTRIC PERFORMANCE......................................................................................................................... 12 7.2 SYSTEM VALIDATION.................................................................................................................................... 12 7.3 EVALUATION OF MULTI-BATTERIES.............................................................................................................. 13 7.4 SUMMARY OF MEASUREMENT RESULTS....................................................................................................... 14 7.5 CONCLUSION................................................................................................................................................ 16 8 MEASUREMENT UNCERTAINTY ............................................................................................17 9 MAIN TEST INSTRUMENTS ....................................................................................................18 ANNEX A MEASUREMENT PROCESS....................................................................................19 ANNEX B TEST LAYOUT .........................................................................................................20 ANNEX C GRAPH RESULTS........................................................................…

Text truncated - open the document above for the full version.

No.2011SAR00023 Page 56 of 103 850 Body Towards Phantom High with GPRS Date/Time: 2011-3-22 14:24:53 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): f = 848.8 MHz; σ = 0.97 mho/m; εr = 53.9; ρ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 GPRS Frequency: 848.8 MHz Duty Cycle: 1:4 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Phantom High/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.982 mW/g Toward Phantom High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 28.5 V/m; Power Drift = -0.062 dB Peak SAR (extrapolated) = 1.24 W/kg SAR(1 g) = 0.913 mW/g; SAR(10 g) = 0.636 mW/g Maximum value of SAR (measured) = 0.974 mW/g Fig. 29 850 MHz CH251 No.2011SAR00023 Page 57 of 103 850 Body Towards Phantom Middle with GPRS Date/Time: 2011-3-22 14:40:27 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.96 mho/m; εr = 54.0; ρ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 GPRS Frequency: 836.6 MHz Duty Cycle: 1:4 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Phantom Middle/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.994 mW/g Toward Phantom Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 28.8 V/m; Power Drift = -0.097 dB Peak SAR (extrapolated) = 1.25 W/kg SAR(1 g) = 0.926 mW/g; SAR(10 g) = 0.647 mW/g Maximum value of SAR (measured) = 0.980 mW/g Fig. 30 850 MHz CH190 No.2011SAR00023 Page 58 of 103 850 Body Towards Phantom Low with GPRS Date/Time: 2011-3-22 14:55:58 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used: f = 825 MHz; σ = 0.943 mho/m; εr = 54.1; ρ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 GPRS Frequency: 824.2 MHz Duty Cycle: 1:4 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Phantom Low/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.02 mW/g Toward Phantom Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 28.8 V/m; Power Drift = 0.028 dB Peak SAR (extrapolated) = 1.30 W/kg SAR(1 g) = 0.955 mW/g; SAR(10 g) = 0.667 mW/g Maximum value of SAR (measured) = 1.02 mW/g Fig. 31 850 MHz CH128 No.2011SAR00023 Page 59 of 103 850 Body Towards Ground Low with Headset_CCA30B4000C3 Date/Time: 2011-3-22 15:12:33 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used: f = 825 MHz; σ = 0.943 mho/m; εr = 54.1; ρ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 Frequency: 824.2 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Ground Low/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.852 mW/g Toward Ground Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.1 V/m; Power Drift = -0.049 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.795 mW/g; SAR(10 g) = 0.543 mW/g Maximum value of SAR (measured) = 0.853 mW/g Fig. 32 850 MHz CH128 No.2011SAR00023 Page 60 of 103 850 Body Towards Ground Low with Headset_CCA30B4010C4 Date/Time: 2011-3-22 15:28:40 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used: f = 825 MHz; σ = 0.943 mho/m; εr = 54.1; ρ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 Frequency: 824.2 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Ground Low/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.943 mW/g Toward Ground Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 27.8 V/m; Power Drift = 0.055 dB Peak SAR (extrapolated) = 1.23 W/kg SAR(1 g) = 0.890 mW/g; SAR(10 g) = 0.616 mW/g Maximum value of SAR (measured) = 0.948 mW/g Fig. 33 850 MHz CH128 No.2011SAR00023 Page 61 of 103 850 Body Towards Ground Low with Headset_CCA30B4010C5 Date/Time: 2011-3-22 15:45:19 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used: f = 825 MHz; σ = 0.943 mho/m; εr = 54.1; ρ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 Frequency: 824.2 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Ground Low/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.903 mW/g Toward Ground Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 27.1 V/m; Power Drift = 0.027 dB Peak SAR (extrapolated) = 1.17 W/kg SAR(1 g) = 0.845 mW/g; SAR(10 g) = 0.583 mW/g Maximum value of SAR (measured) = 0.902 mW/g Fig. 34 850 MHz CH128 No.2011SAR00023 Page 62 of 103 1900 Body Towards Ground High with GPRS Date/Time: 2011-3-23 13:41:08 Electronics: DAE4 Sn771 Medium: Body 1900 MHz Medium parameters used: f = 1910 MHz; σ = 1.52 mho/m; εr = 52.3; ρ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 1900MHz GPRS Frequency: 1909.8 MHz Duty Cycle: 1:4 Probe: ES3DV3 - SN3149 ConvF(4.68, 4.68, 4.68) Toward Ground High/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.821 mW/g Toward Ground High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.0 V/m; Power Drift = 0.007 dB Peak SAR (extrapolated) = 1.14 W/kg SAR(1 g) = 0.686 mW/g; SAR(10 g) = 0.400 mW/g Maximum value of SAR (measured) = 0.743 mW/g Toward Ground High/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.0 V/m; Power Drift = 0.007 dB Peak SAR (extrapolated) = 0.723 W/kg SAR(1 g) = 0.460 mW/g; SAR(10 g) = 0.284 mW/g Maximum value of SAR (measure…

Text truncated - open the document above for the full version.

Appendix A: SPEAG’s new calibration certifications Appendix B: SPEAG’s Evaluation report

TEST REPORT No. 2011TAR129 for TCT Mobile Limited GSM dual bands mobile phone Model Name: Mikko GPRS US Marketing Name：one touch 214A FCC ID: RAD175 with Hardware Version: Proto Software Version: E02 Issued Date: Mar 29, 2011 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. DGA-PL-114/01-02 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629A-1 TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Tel:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No.2011TAR129 Page2 of 66 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER (§22.913(A)/§24.232(B)) ................................................................................ 11 A.2 EMISSION LIMT (§2.1051/§22.917§24.238) ............................................................................. 17 A.3 CONDUCTED EMISSION (§15.107§15.207) ............................................................................. 22 A.4 FREQUENCY STABILITY (§2.1055/§24.235) ........................................................................... 24 A.5 OCCUPIED BANDWIDTH (§2.1049(H)(I)) ................................................................................. 26 A.6 EMISSION BANDWIDTH (§22.917(B)/§24.238(B)) .................................................................. 34 A.7 BAND EDGE COMPLIANCE (§22.917(B)/§24.238(B)) ............................................................. 42 A.8 CONDUCTED SPURIOUS EMISSION (§2.1057/§22.917/§24.238) ........................................... 46 No.2011TAR129 Page3 of 66 1. Test Laboratory 1.1. Testing Location Company Name: TMC Beijing, Telecommunication Metrology Center of MIIT Address: 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China Postal Code: 100191 Telephone: 00861062304633 Fax: 00861062304793 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: Mar 07, 2011 Testing End Date: Mar 29, 2011 1.4. Signature Zi Xiaogang (Prepared this test report) Sun Xiangqian (Reviewed this test report) Lu Bingsong Deputy Director of the laboratory (Approved this test report) No.2011TAR129 Page4 of 66 2. Client Information 2.1. Applicant Information Company Name: TCT Mobile Limited Address /Post: 5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 City: Shanghai Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 2.2. Manufacturer Information Company Name: TCT Mobile Limited Address /Post: 5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 City: Shanghai Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 No.2011TAR129 Page5 of 66 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description GSM dual bands mobile phone Model Name Mikko GPRS US Marketing Name one touch 214A FCC ID RAD175 Frequency GSM 850MHz; PCS 1900MHz Antenna Internal Power supply Battery or Charger (AC Adaptor) Output power 30.78 dBm maximum EIRP measured for GSM1900 Extreme vol. Limits 3.5VDC to 4.2VDC (nominal: 3.8VDC) Extreme temp. Tolerance -30°C to +50°C Note: Components li…

Text truncated - open the document above for the full version.

EUT Set-up photos FCC ID:RAD175 CE: RSE: