RAD199GSM dual band mobile phone

1234567 131489101112 1 Your cellphone ......... 1.1 Keys Navigation key Confirm an option (press the middle of the key) Send call Access to call log (idle screen) Power on/off the handset (press and hold) End call Return to idle Left softkey Right softkey Dial the voicemail number (press and hold) From Idle screen - Press: enter zero - Press and hold: enter the symbol “+/P/W” In Edit mode: - Press: " " (space) (text edit mode) 0 (Add numbers) From Idle screen - Press: * - Press and hold: Lock keypad in idle screen In Edit mode: - Press: change input methods From Idle screen - Press: # - Press and hold: activate/deactivate the vibrator In Edit mode: - Press: access the Symbols table From Idle screen - Press: dial ‘5’ - Press and hold: switch on/off the torch 1.2 Idle screen icons In one touch 117A: Battery charge level. Call forwarding activated: your calls are forwarded. Alarm clock programmed. Roaming. Level of network reception. Silence mode: your cellphone neither rings, beeps nor vibrates. Message unread. Keypad locked. In one touch 217A: Battery charge level. Vibrate alert: your cellphone vibrates, but neither rings nor beeps. Headset connected. Call forwarding activated: your calls are forwarded. Alarm clock programmed. Voicemail message arrived. Unanswered calls. Roaming. Level of network reception. Silence mode: your cellphone neither rings, beeps nor vibrates. Message unread. Keypad locked. Ringtone alert. Vibrate and ringtone alert. 3 Calls .......................... 3.1 Making a call Dial the desired number then press the key to place the call. If you make a mistake, you can delete the incorrect digits by pressing the right softkey. To hang up the call, press the key. Making an emergency call If your cellphone is covered by the network, dial emergency number and press the key to make an emergency call. This works even without a SIM card and without typing the PIN code or unlocking the keypad. 3.2 Calling your voicemail (1) To access your voicemail, hold down the key. 3.3 Receiving a call When you receive an incoming call, press the key to talk and then hang up using the key. 3.4 Available functions during the call During a call, you can use your directory, your calendar, text messages, etc. without hanging up or dropping the call. (1) Contact your network operator to check service availability. 117A 217A 8 Voice memo .. (1) (2) 8.1 New record In this menu, you can record new voice memo, and press or to save it. 8.2 Memo list It contains all the voice memos you recorded before. Pressing "Options" softkey, you can Play/rename/delete it and also set it as a alarm melody. 8.3 Settings You can manage the voice memo in settings of audio quality. Quick Start Guide For more information about how to use the cellphone, please go to www.alcatelonetouch.com to download complete user manual (English version only). Also on our website you can find helpful FAQs. (English version only). Prolonged exposure to music at full volume on the music player may damage the listener's hearing. Set your cellphone volume safely. Use only headphones recommended by TCT Mobile Limited and its affiliates. English - CJB23L1ALAAA 6 Call log ........... (1) (2) You can access your call memory by pressing from the idle screen, or press the key and select the (1) \ (2) icon from the menu. 6.1 Unanswered In this menu, you can find the unanswered calls list. 6.2 Outgoing calls In this menu, you can find the outgoing calls list. 6.3 Answered calls In this menu,you can find the answered calls list. 7 FM Radio ....... (1) (2) Your cellphone is equipped with a radio (3) with RDS functionality. You can use the application as a traditional radio with saved channels or with parallel visual information related to the radio program on the display if you tune to stations that offer Visual Radio service. You can listen to it while running other applications. 4 Contacts ........ (1) (2) 4.1 Consulting your contacts To access the directory from the idle screen, press the key and select the (1) \ (2) icon from the menu. 4.2 Adding a contact Select the directory in which you wish to create a file, press the “Options” softkey, select “Add contact” then . 5 Messaging ...... (1) (2) 5.1 Create SMS From the main menu select “Messaging” to create text message. You can type a message, and you're also able to insert a pre-defined message from “Templates”. While writing a message, select “Options” to access all the messaging options. You can save your messages that you send often to “Drafts” . Specific letters (accent) will increase the size of the SMS, this may cause multiple SMS to be sent to your recipient. 2 Getting started ......... 2.1 Set-up Removing and installing the back cover Removing and installing the battery Inserting and removing the SIM card Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, push it and slide it out. 9 Settings .......... (1) (2) From the main menu, select the menu icon (1) \ (2) and select the function of your choice in order to customize your cellphone: Phone settings, Call settings, Call control, Network, Security, Restore default set. 10 Games & Tools............. (1) (2) 10.1 Games Your Alcatel cellphone includes a game. Select “Game settings”, it allows you to manage settings, in which you may set background audio and vibrate alert. 10.2 Alarm Your cellphone has a built-in alarm clock with snooze feature. 10.3 Organizer Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc. Days with events entered will be marked. 10.4 Calculator Hold down the key to get the decimal point. Confirm with the key or the left softkey. 10.5 Torch To light in darkness,you may activate “Torch” by below operations: In idle screen, press and hold key to activate the Torch light; press key or press and hold key to deactivate it. 11 Profiles ......... (1) (2) With this menu, you ma…

Text truncated - open the document above for the full version.

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 Date 2011-6-29 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: TMC (Telecommunication Metrology Center of MIIT) is authorized to act on our behalf, until otherwise notified, for applications to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Gong Zhizhou Approval Team Leader TCT Mobile Limited

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 6/29/2011 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: RAD199 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou Gong Approval Team Leader TCT Mobile Limited

EUT photograph

EUT Label Location EUT Label Location

EUT Interior photograph

No.2011SAR00092 Page 1 of 108 ©Copyright. All rights reserved by TMC Beijing. SAR TEST REPORT No. 2011SAR00092 For TCT Mobile Limited GSM dual band mobile phone U11 B/W US one touch 117A With Hardware Version: PIO Software Version: V112 FCCID: RAD199 Issued Date: 2011-07-28 No. DGA-PL-114/01-02 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: TMC Beijing, Telecommunication Metrology Center of MIIT No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2079, Fax:+86(0)10-62304793 Email:[email protected]. www.emcite.com No.2011SAR00092 Page 2 of 108 TABLE OF CONTENT 1 TEST LABORATORY..................................................................................................................3 1.1 TESTING LOCATION........................................................................................................................................3 1.2 TESTING ENVIRONMENT.................................................................................................................................3 1.3 PROJECT DATA...............................................................................................................................................3 1.4 SIGNATURE.....................................................................................................................................................3 2 CLIENT INFORMATION..............................................................................................................4 2.1 APPLICANT INFORMATION..............................................................................................................................4 2.2 MANUFACTURER INFORMATION.....................................................................................................................4 3 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................5 3.1 ABOUT EUT...................................................................................................................................................5 3.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST..........................................................................5 3.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST.............................................................................5 4 CHARACTERISTICS OF THE TEST..........................................................................................6 4.1 APPLICABLE LIMIT REGULATIONS..................................................................................................................6 4.2 APPLICABLE MEASUREMENT STANDARDS......................................................................................................6 5 OPERATIONAL CONDITIONS DURING TEST..........................................................................7 5.1 SCHEMATIC TEST CONFIGURATION.................................................................................................................7 5.2 SAR MEASUREMENT SET-UP..........................................................................................................................7 5.3 DASY4 E-FIELD PROBE SYSTEM.....................................................................................................................8 5.4 E-FIELD PROBE CALIBRATION........................................................................................................................9 5.5 OTHER TEST EQUIPMENT.............................................................................................................................10 5.6 EQUIVALENT TISSUES...................................................................................................................................10 5.7 SYSTEM SPECIFICATIONS..............................................................................................................................11 6 CONDUCTED OUTPUT POWER MEASUREMENT.................................................................12 6.1 SUMMARY....................................................................................................................................................12 6.2 CONDUCTED POWER....................................................................................................................................12 7 TEST RESULTS........................................................................................................................13 7.1 DIELECTRIC PERFORMANCE.........................................................................................................................13 7.2 SYSTEM VALIDATION....................................................................................................................................13 7.3 EVALUATION OF MULTI-BATTERIES..............................................................................................................14 7.4 SUMMARY OF MEASUREMENT RESULTS.......................................................................................................15 7.5 CONCLUSION................................................................................................................................................17 8 MEASUREMENT UNCERTAINTY............................................................................................18 9 MAIN TEST INSTRUMENTS ....................................................................................................19 ANNEX A MEASUREMENT PROCESS....................................................................................20 ANNEX B TEST LAYOUT .........................................................................................................21 ANNEX C GRAPH RESULTS....................................................................................................26 ANNEX…

Text truncated - open the document above for the full version.

No.2011SAR00092 Page 74 of 108 850 Body Towards Ground High with battery CAB2170000C1 Date/Time: 2011-7-17 15:01:38 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): f = 848.8 MHz; ı = 0.958 mho/m; İr = 53.9; ȡ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 Frequency: 848.8 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Ground High/Area Scan (61x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.772 mW/g Toward Ground High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.9 V/m; Power Drift = -0.004 dB Peak SAR (extrapolated) = 0.987 W/kg SAR(1 g) = 0.720 mW/g; SAR(10 g) = 0.497 mW/g Maximum value of SAR (measured) = 0.769 mW/g Fig. 45 850 MHz CH251 No.2011SAR00092 Page 75 of 108 850 Body Towards Ground High with battery CAB30M0000C1 Date/Time: 2011-7-17 15:18:30 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): f = 848.8 MHz; ı = 0.958 mho/m; İr = 53.9; ȡ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 Frequency: 848.8 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Ground High/Area Scan (61x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.774 mW/g Toward Ground High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.3 V/m; Power Drift = -0.084 dB Peak SAR (extrapolated) = 0.983 W/kg SAR(1 g) = 0.721 mW/g; SAR(10 g) = 0.499 mW/g Maximum value of SAR (measured) = 0.769 mW/g Fig. 46 850 MHz CH251 No.2011SAR00092 Page 76 of 108 850 Body Towards Ground High with battery CAB30M0000C2 Date/Time: 2011-7-17 15:35:19 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): f = 848.8 MHz; ı = 0.958 mho/m; İr = 53.9; ȡ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 Frequency: 848.8 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Ground High/Area Scan (61x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.752 mW/g Toward Ground High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.5 V/m; Power Drift = -0.007 dB Peak SAR (extrapolated) = 0.955 W/kg SAR(1 g) = 0.700 mW/g; SAR(10 g) = 0.484 mW/g Maximum value of SAR (measured) = 0.748 mW/g Fig. 47 850 MHz CH251 No.2011SAR00092 Page 77 of 108 850 Body Towards Ground High with battery CAB30B4000C1 Date/Time: 2011-7-17 15:51:59 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): f = 848.8 MHz; ı = 0.958 mho/m; İr = 53.9; ȡ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: GSM 850 Frequency: 848.8 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) Toward Ground High/Area Scan (61x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.756 mW/g Toward Ground High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.6 V/m; Power Drift = -0.031 dB Peak SAR (extrapolated) = 0.965 W/kg SAR(1 g) = 0.704 mW/g; SAR(10 g) = 0.486 mW/g Maximum value of SAR (measured) = 0.750 mW/g Fig. 48 850 MHz CH251 No.2011SAR00092 Page 78 of 108 ANNEX D SYSTEM VALIDATION RESULTS 835MHz Date/Time: 2011-7-17 7:28:23 Electronics: DAE4 Sn771 Medium: Head 850 MHz Medium parameters used: f = 835 MHz; ı = 0.91 mho/m; İ r = 42.1; ȡ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: ES3DV3 - SN3149 ConvF(6.56, 6.56, 6.56) System Validation /Area Scan (101x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 2.63 mW/g System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.8 V/m; Power Drift = 0.089 dB Peak SAR (extrapolated) = 3.37 W/kg SAR(1 g) = 2.38 mW/g; SAR(10 g) = 1.52 mW/g Maximum value of SAR (measured) = 2.56 mW/g   0 dB = 2.56mW/g Fig.49 validation 835MHz 250mW No.2011SAR00092 Page 79 of 108 835MHz Date/Time: 2011-7-17 8:02:41 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used: f = 835 MHz; ı = 0.95 mho/m; İ r = 54.0; ȡ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: ES3DV3 - SN3149 ConvF(6.22, 6.22, 6.22) System Validation /Area Scan (101x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 2.57 mW/g System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 51.1 V/m; Power Drift = -0.071 dB Peak SAR (extrapolated) = 3.31 W/kg SAR(1 g) = 2.34 mW/g; SAR(10 g) = 1.51 mW/g Maximum value of SAR (measured) = 2.42 mW/g   0 dB = 2.42mW/g Fig.50 validation 835MHz 250mW No.2011SAR00092 Page 80 of 108 1900MHz Date/Time: 2011-7-18 7:26:52 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used: f = 1900 MHz; ı = 1.38 mho/m; İ r = 39.6; ȡ = 1000 kg/m 3 Ambient Temperature:23.0 o C Liquid Temperature: 22.5 o C Communication System: CW Frequency: 1900 MHz Duty Cycle: 1:1 Probe: ES3DV3 - SN3149 ConvF(5.03, 5.03, 5.03) System Validation/Area Scan (101x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 11.6 mW/g System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 89.8 V/m; Power Drift = -0.043 dB Peak SAR (extrapolated) = 14.8 W/kg SAR(1 g) = 9.75 mW/g; SAR(10 g) = 4.91 mW/g Maximum value of SAR (measured) = 10.5 mW/g   0 dB = 10.5mW/g Fig.51 validation 1900MHz 250mW No.2011SAR00092 Page 81 of 108 1900MHz Date/Time: 2011-7-18 7:59:01 Electronics: DAE4 Sn771 Medium: Body 1900 MHz Medium parameters used: f = 1900 MHz; ı = 1.50 mho/m; İ r = 52.6; ȡ = 1000 kg/m…

Text truncated - open the document above for the full version.

Appendix A: SPEAG’s new calibration certifications Appendix B: SPEAG’s Evaluation report

TEST REPORT No. 2011TAR420 for TCT Mobile Limited GSM dual band mobile phone Model Name: U11 B/W US Marketing Name：Alcatel one touch 117A FCC ID: RAD199 with Hardware Version: PIO Software Version: V112 Issued Date: Jul 26, 2011 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. DGA-PL-114/01-02 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629A-1 TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Tel:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No.2011TAR420 Page2 of 62 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. GENERAL DESCRIPTION ............................................................................................................ 7 4. REFERENCE DOCUMENTS ............................................................................................................. 8 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 8 5. LABORATORY ENVIRONMENT ..................................................................................................... 9 6. SUMMARY OF TEST RESULTS ..................................................................................................... 10 7. TEST EQUIPMENTS UTILIZED ..................................................................................................... 11 ANNEX A: MEASUREMENT RESULTS ................................................................................................ 1 2 A.1 OUTPUT POWER (§22.913(A)/§24.232(B)) ............................................................................... 12 A.2 EMISSION LIMT (§2.1051/§22.917§24.238) ............................................................................. 18 A.3 CONDUCTED EMISSION (§15.107§15.207) ............................................................................. 23 A.4 FREQUENCY STABILITY (§2.1055/§24.235) ........................................................................... 30 A.5 OCCUPIED BANDWIDTH (§2.1049(H)(I)) ................................................................................. 32 A.6 EMISSION BANDWIDTH (§22.917(B)/§24.238(B)) .................................................................. 36 A.7 BAND EDGE COMPLIANCE (§22.917(B)/§24.238(B)) ............................................................. 40 A.8 CONDUCTED SPURIOUS EMISSION (§2.1057/§22.917/§24.238) ............................................ 42 No.2011TAR420 Page3 of 62 1. Test Laboratory 1.1. Testing Location Company Name: TMC Beijing, Telecommunication Metrology Center of MIIT Address: 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China Postal Code: 100191 Telephone: 00861062304633 Fax: 00861062304793 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: Jun 17, 2011 Testing End Date: Jul 26, 2011 1.4. Signature Zi Xiaogang (Prepared this test report) Sun Xiangqian (Reviewed this test report) Lu Bingsong Deputy Director of the laboratory (Approved this test report) No.2011TAR420 Page4 of 62 2. Client Information 2.1. Applicant Information Company Name: TCT Mobile Limited Address /Post: 5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 City: Shanghai Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 2.2. Manufacturer Information Company Name: TCT Mobile Limited Address /Post: 5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 City: Shanghai Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 No.2011TAR420 Page5 of 62 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description GSM dual band mobile phone Model Name U11 B/W US Marketing Name FCC ID Alcatel one touch 117A RAD199 Frequency GSM 850MHz; PCS 1900MHz Antenna Internal Power supply Battery or Charger (AC Adaptor) Output power 31.97 dBm maximum ERP measured for GSM850 Extreme vol. Limits 3.5VDC to 4.2VDC (nominal: 3.8VDC) Extreme temp. Tolerance -30°C to +50°C Note: Componen…

Text truncated - open the document above for the full version.

EUT Set-up photos CE: RSE: