RAD270GSM dual band mobile phone

1234567 131489101112 1 Your mobile .............. 1.1 Keys Navigation key Confirm an option (press the middle of the key) Send call Access call log (idle screen) Power on/off the handset (press and hold) End call Return to idle screen Left softkey Right softkey Dial the voicemail number (press and hold) From idle screen - Press: enter zero - Press and hold: enter the symbol “+/P/W” In Edit mode: - Press: access the symbol table (words mode) input "0" (number mode) From idle screen - Press: * - Press and hold: Lock keypad in idle screen In Edit mode: - Press: change input methods - Press and hold: switch languages (1) \ (2) From idle screen - Press: # - Press and hold: Silent mode on/off (1) Activate/deactivate the vibrator (2) In Edit mode: - Press: input a space From idle screen - Press: dial ‘5’ - Press and hold: switch on/off the torch 1.2 Idle screen icons (1) In ONE TOUCH 132A: Battery charge level. Call forwarding activated: your calls are forwarded. Alarm clock programmed. Roaming. Level of network reception. Silence or Vibrate mode: your phone neither rings nor beeps. Message unread. Keypad locked. In ONE TOUCH 232A: Battery charge level. Vibrate alert: your phone vibrates, but neither rings nor beeps. Headset connected. Call forwarding activated: your calls are forwarded. Alarm clock programmed. Voicemail message arrived. Unanswered calls. Roaming. Level of network reception. Silent mode: your phone neither rings, beeps nor vibrates. Message unread. Keypad locked. Ringtone alert. Vibrate and ringtone alert. 3 Calls .......................... 3.1 Making a call Dial the desired number then press the key to place the call. If you make a mistake, you can delete the incorrect digits by pressing the right softkey. To hang up the call, press the key. Making an emergency call If your phone is covered by the network, dial emergency number and press the key to make an emergency call. This works even without a SIM card and without typing the PIN code or unlocking the keypad. 3.2 Calling your voicemail (1) To access your voicemail, hold down the key. 3.3 Receiving a call When you receive an incoming call, press the key to talk and then hang up using the key. 3.4 Available functions during the call During a call, you can use contacts, short messages, etc. without losing your correspondent. (1) Contact your network operator to check service availability. 132A 232A 9 Settings .......... (1) (2) From the main menu, select the menu icon (1) \ (2) and select the function of your choice in order to customize your telephone: Phone settings, Call settings, Call control, Network, Security, Restore default set. 10 Tools............. (1) (2) 10.1 Calculator Hold down the (1) \ (2) key to get the decimal point. Confirm with the key or the left softkey. 10.2 Calendar Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc. Days with events entered will be marked. 10.3 Blacklist All the callers in the black list will be automatically blocked when this mode is on. You are allowed to add 20 contacts to the list from the Contacts or to add the unwanted numbers directly. Quick Start Guide For more information about how to use the phone, please go to www.alcatelonetouch.com to download complete user manual (English version only). Also on our website you can find helpful FAQs (English version only). Prolonged exposure to music at full volume on the music player may damage the listener's hearing. Set your phone volume safely. Use only headphones recommended by TCT Mobile Limited and its affiliates. English - CJB25L1ALAAA 6 Call log ........... (1) (2) You can access your call memory by pressing from the idle screen, or press the key and select the (1) \ (2) icon from the menu. 7 FM Radio ........ (1) (2) Your phone is equipped with a radio (3) with RDS functionality. You can use the application as a traditional radio with saved channels or with parallel visual information related to the radio program on the display if you tune to stations that offer Visual Radio service. You can listen to it while running other applications. 8 Alarm (2) ................. Your mobile phone has a built-in alarm clock with snooze feature. 4 Contacts ........ (1) (2) 4.1 Consulting your contacts To access contacts from the idle screen, press the key and select the (1) \ (2) icon from the menu. 4.2 Adding a contact Select the contact in which you wish to create a file, press the “Options” softkey, select “Add contact” then . 5 Messaging ...... (1) (2) 5.1 Create SMS From the main menu select “Messaging” to create text message. You can type a message, and you're also able to insert a pre-defined message from “Templates”. While writing a message, select “Options” to access all the messaging options. You can save your messages that you send often to “Drafts” . Specific letters (accent) will increase the size of the SMS, this may cause multiple SMS to be sent to your recipient. 2 Getting started ......... 2.1 Set-up Removing and installing the back cover Removing and installing the battery Inserting and removing the SIM card Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, push it and slide it out. 10.4 Torch To light in darkness,you may activate “Torch” by below operations: In idle screen, press and hold key to activate the Torch light; press key or Press and hold key to deactivate it. 10.5 Games Your ALCATEL ONE TOUCH phone includes a game. Select “Game settings”, it allows you to manage settings, in which you may set background audio and vibrate alert. 10.6 Alarm (1) Your mobile phone has a built-in alarm clock with snooze feature. 11 Profiles ......... (1) (2) With this menu, you may personalize ringtones for different events and environments. 12 Services ........ (1) (2) Contact your network operator to check service availability. 13 Latin input mode ... This mode allows you to type a t…

Text truncated - open the document above for the full version.

Antenna details For ONE TOUCH 132A RF antenna: Monopole GSM850 DCS1900 Gain -2.8 dBi -2.2 dBi The location of the antennas (US) inside mobile phone is shown below: FM Antenna GSM Antenna

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 Date 2012-7-13 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: TMC (Telecommunication Metrology Center of MIIT) is authorized to act on our behalf, until otherwise notified, for applications to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Gong Zhizhou Approval Team Leader TCT Mobile Limited

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 7/13/2012 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: RAD270 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou Gong Approval Team Leader TCT Mobile Limited

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 Declaration of USB Port ONE TOUCH 132A, use a mini-USB port in handset. This USB port support charging and headset, but don’t s upport data transmission function. Signature: Print name: Gong Zhizhou Date:2012-7-18 Company: TCT Mobile Limited

EUT photograph

EUT Label Location

EUT Interior photograph

No.2012SAR00068 Page 1 of 122 ©Copyright. All rights reserved by TMC Beijing. SAR TEST REPORT No. 2012SAR00068 For TCT Mobile Limited GSM dual band mobile phone Model name: U12 B&W Marketing name: ONE TOUCH 132A With Hardware Version: proto Software Version: v910 FCCID: RAD270 Issued Date: 2012-07-09 No. DGA-PL-114/01-02 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: TMC Beijing, Telecommunication Metrology Center of MIIT No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2079, Fax:+86(0)10-62304633 Email:[email protected]. www.emcite.com Revision Version Report Number Revision Date Memo 2012SAR00068 00 2012/07/09 Initial creation of test report No. 2012SAR00068 Page 3 of 122 TABLE OF CONTENT 1 TEST LABORATORY .................................................................................................................. 5! 1.1 TESTING LOCATION ........................................................................................................................................ 5! 1.2 TESTING ENVIRONMENT ................................................................................................................................. 5! 1.3 PROJECT DATA ............................................................................................................................................... 5! 1.4 SIGNATURE ..................................................................................................................................................... 5! 2 STATEMENT OF COMPLIANCE ................................................................................................ 6! 3 CLIENT INFORMATION .............................................................................................................. 7! 3.1 APPLICANT INFORMATION .............................................................................................................................. 7! 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 7! 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................ 8! 4.1 ABOUT EUT ................................................................................................................................................... 8! 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 8! 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................................. 8! 5 TEST METHODOLOGY .............................................................................................................. 9! 5.1 APPLICABLE LIMIT REGULATIONS .................................................................................................................. 9! 5.2 APPLICABLE MEASUREMENT STANDARDS ...................................................................................................... 9! 6 SPECIFIC ABSORPTION RATE (SAR) .................................................................................... 10! 6.1 INTRODUCTION ............................................................................................................................................. 10! 6.2 SAR DEFINITION .......................................................................................................................................... 10! 7 SAR MEASUREMENT SETUP ................................................................................................. 11! 7.1 MEASUREMENT SET-UP ................................................................................................................................ 11! 7.2 DASY4 OR DASY5 E-FIELD PROBE SYSTEM ................................................................................................ 12! 7.3 E-FIELD PROBE CALIBRATION ...................................................................................................................... 12! 7.4 OTHER TEST EQUIPMENT ............................................................................................................................. 13! 7.4.1 DATA ACQUISITION ELECTRONICS(DAE) ................................................................................................. 13! 7.4.2 ROBOT ....................................................................................................................................................... 14! 7.4.3 MEASUREMENT SERVER ............................................................................................................................ 14! 7.4.4 DEVICE HOLDER FOR PHANTOM................................................................................................................ 15! 7.4.5 PHANTOM .................................................................................................................................................. 15! 8. POSITION OF THE WIRELESS DEVICE IN RELATION TO THE PHANTOM ........................ 17! 8.1 GENERAL CONSIDERATIONS .......................................................................................................................... 17! 8.2 BODY-WORN DEVICE .................................................................................................................................... 18! 8.3 DESKTOP DEVICE .......................................................................................................................................... 18! 8.4 DUT SETUP PHOTOS .................................................................................................................................... 20! 9 TISSUE SIMULATING LIQUIDS .............................................................................…

Text truncated - open the document above for the full version.

No. 2012SAR00068 Page 61 of 122 850 Body Towards Ground Middle with battery CAB25L0001C2 Date: 2012-6-30 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): I 0+]ı PKRPİU ȡ  1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 850 Frequency: 836.6 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.14, 6.14, 6.14) Toward Ground Middle/Area Scan (61x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.637 mW/g Toward Ground Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.727 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 0.800 mW/g SAR(1 g) = 0.598 mW/g; SAR(10 g) = 0.428 mW/g Maximum value of SAR (measured) = 0.634 mW/g Fig. 25 850 MHz CH190 No. 2012SAR00068 Page 62 of 122 850 Body Towards Ground Middle with battery CAB25L0000C1 Date: 2012-6-30 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): I 0+]ı PKRPİU ȡ  1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 850 Frequency: 836.6 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.14, 6.14, 6.14) Toward Ground Middle/Area Scan (61x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.669 mW/g Toward Ground Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.869 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.821 mW/g SAR(1 g) = 0.622 mW/g; SAR(10 g) = 0.444 mW/g Maximum value of SAR (measured) = 0.659 mW/g Fig. 26 850 MHz CH190 No. 2012SAR00068 Page 63 of 122 850 Body Towards Ground Middle with battery CAB25L0002C2 Date: 2012-6-30 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): I 0+]ı PKRPİU ȡ  1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 850 Frequency: 836.6 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.14, 6.14, 6.14) Toward Ground Middle/Area Scan (61x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.642 mW/g Toward Ground Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.266 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.794 mW/g SAR(1 g) = 0.596 mW/g; SAR(10 g) = 0.426 mW/g Maximum value of SAR (measured) = 0.633 mW/g Fig. 27 850 MHz CH190 No. 2012SAR00068 Page 64 of 122 850 Body Towards Ground Middle with battery CAB2170000C2 Date: 2012-6-30 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): I 0+]ı PKRPİU ȡ  1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 850 Frequency: 836.6 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.14, 6.14, 6.14) Toward Ground Middle/Area Scan (61x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.633 mW/g Toward Ground Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.909 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.786 mW/g SAR(1 g) = 0.590 mW/g; SAR(10 g) = 0.420 mW/g Maximum value of SAR (measured) = 0.624 mW/g Fig. 28 850 MHz CH190 No. 2012SAR00068 Page 65 of 122 1900 Left Cheek High Date: 2012-7-1 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used: I 0+]ı PKRPİU ȡ NJP 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 1900MHz Frequency: 1909.8 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(5.19, 5.19, 5.19) Cheek High/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.792 mW/g Cheek High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.970 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 1.058 mW/g SAR(1 g) = 0.682 mW/g; SAR(10 g) = 0.403 mW/g Maximum value of SAR (measured) = 0.748 mW/g Fig. 29 1900 MHz CH810 No. 2012SAR00068 Page 66 of 122 1900 Left Cheek Middle Date: 2012-7-1 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used: I 0+]ı PKRPİU ȡ NJP 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 1900MHz Frequency: 1880 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(5.19, 5.19, 5.19) Cheek Middle/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.865 mW/g Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.889 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 1.081 mW/g SAR(1 g) = 0.720 mW/g; SAR(10 g) = 0.435 mW/g Maximum value of SAR (measured) = 0.780 mW/g Fig. 30 1900 MHz CH661 No. 2012SAR00068 Page 67 of 122 Fig. 30-1 Z-Scan at power reference point (1900 MHz CH661) No. 2012SAR00068 Page 68 of 122 1900 Left Cheek Low Date: 2012-7-1 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used (interpolated): I 0+]ı PKRPİU ȡ  1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 1900MHz Frequency: 1850.2 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(5.19, 5.19, 5.19) Cheek Low/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.783 mW/g Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.285 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.945 mW/g SAR(1 g) = 0.657 mW/g; SAR(10 g) = 0.403 mW/g Maximum value of SAR (measured) = 0.708 mW/g Fig. 31 1900 MHz CH512 No. 2012SAR00068 Page 69 of 122 1900 Left Tilt High Date: 2012-7-1 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used: I 0+]ı PKRPİU ȡ NJP 3…

Text truncated - open the document above for the full version.

No. 2012SAR00068 Page 108 of 122 No. 2012SAR00068 Page 109 of 122 No. 2012SAR00068 Page 110 of 122 1900 MHz Dipole Calibration Certificate No. 2012SAR00068 Page 111 of 122 No. 2012SAR00068 Page 112 of 122 No. 2012SAR00068 Page 113 of 122 No. 2012SAR00068 Page 114 of 122 No. 2012SAR00068 Page 115 of 122 No. 2012SAR00068 Page 116 of 122 No. 2012SAR00068 Page 117 of 122 No. 2012SAR00068 Page 118 of 122 ANNEX E SPOT CHECK TEST As the test lab for ONE TOUCH 132A from TCT Mobile Limited, we, TMC Beijing, declare on our sole responsibility that, according to “Declaration of changes” provided by applicant, only the Spot check test should be performed. The test results are as below. SAR Values (GSM 850 MHz Band - Head) Frequency Side Test Position Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 848.8 251 Left Touch CAB24Q0000C1 1.07 0.933 SAR Values (PCS 1900 MHz Band - Head) Frequency Side Test Position Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 1880 661 Left Touch CAB24Q0000C1 0.720 0.708 SAR Values (GSM 850 MHz Band - Body) Frequency Mode/Band Test Position Spacing (mm) Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 836.6 190 Speech Ground 15 CAB24Q0000C1 0.681 0.637 SAR Values (PCS 1900 MHz Band - Body) Frequency Mode/Band Test Position Spacing (mm) Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 1850.2 512 Speech Ground 15 CAB24Q0000C1 0.269 0.232 No. 2012SAR00068 Page 119 of 122 850 Left Cheek High Date: 2012-6-30 Electronics: DAE4 Sn771 Medium: Head 850 MHz Medium parameters used (interpolated): I 0+]ı PKRPİU ȡ  1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 850 Frequency: 848.8 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.26, 6.26, 6.26) Cheek High/Area Scan (61x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.02 mW/g Cheek High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.404 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 1.224 mW/g SAR(1 g) = 0.933 mW/g; SAR(10 g) = 0.656 mW/g Maximum value of SAR (measured) = 0.991 mW/g 850MHz CH251 No. 2012SAR00068 Page 120 of 122 1900 Left Cheek Middle Date: 2012-7-1 Electronics: DAE4 Sn771 Medium: Head 1900 MHz 0HGLXPSDUDPHWHUVXVHGI 0+]ı PKRPİU ȡ NJP 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 1900MHz Frequency: 1880 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(5.19, 5.19, 5.19) Cheek Middle/Area Scan (51x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.841 mW/g Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.138 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.056 mW/g SAR(1 g) = 0.708 mW/g; SAR(10 g) = 0.424 mW/g Maximum value of SAR (measured) = 0.762 mW/g 1900 MHz CH661 No. 2012SAR00068 Page 121 of 122 850 Body Towards Ground Middle Date: 2012-6-30 Electronics: DAE4 Sn771 Medium: Body 850 MHz 0HGLXPSDUDPHWHUVXVHG LQWHUSRODWHG I 0+]ı PKRPİU ȡ = 1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 850 Frequency: 836.6 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(6.14, 6.14, 6.14) Toward Ground Middle/Area Scan (61x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.689 mW/g Toward Ground Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.349 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.849 mW/g SAR(1 g) = 0.637 mW/g; SAR(10 g) = 0.451 mW/g Maximum value of SAR (measured) = 0.675 mW/g 850 MHz CH190 No. 2012SAR00068 Page 122 of 122 1900 Body Towards Ground Low Date: 2012-7-1 Electronics: DAE4 Sn771 Medium: Body 1900 MHz 0HGLXPSDUDPHWHUVXVHG LQWHUSRODWHG I 0+]ı PKRPİU ȡ  1000 kg/m 3 Ambient Temperature:22.6 o C Ambient Temperature:22.0 o C Communication System: GSM 1900MHz Frequency: 1850.2 MHz Duty Cycle: 1:8.3 Probe: ES3DV3 - SN3149 ConvF(4.64, 4.64, 4.64) Toward Ground Low/Area Scan (61x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.242 mW/g Toward Ground Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.155 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.344 mW/g SAR(1 g) = 0.232 mW/g; SAR(10 g) = 0.147 mW/g Maximum value of SAR (measured) = 0.252 mW/g Toward Ground Low/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.155 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.276 mW/g SAR(1 g) = 0.173 mW/g; SAR(10 g) = 0.108 mW/g Maximum value of SAR (measured) = 0.192 mW/g 1900 MHz CH512

No2012TAR386 Page1 of 62 TEST REPORT No. 2012TAR386 for TCT Mobile Limited GSM dual band mobile phone Model Name: U12 B&W Marketing Name：ONE TOUCH 132A FCC ID: RAD270 with Hardware Version: proto Software Version: v910 Issued Date: Jul 17 , 2012 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. DGA-PL-114/01-02 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629B TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Te l:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No2012TAR386 Page2 of 62 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULT S ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER ............................................................................................................................11 A.2 EMISSION LIMT ............................................................................................................................ 17 A.3 CONDUCTED EMISSION ............................................................................................................. 23 A.4 FREQUENCY STABILITY ............................................................................................................ 30 A.5 OCCUPIED BANDWIDTH .............................................................................................................. 32 A.6 EMISSION BANDWIDTH................................................................................................................ 36 A.7 BAND EDGE COMPLIANCE .......................................................................................................... 40 A.8 CONDUCTED SPURIOUS EMISSION ............................................................................................ 42 No2012TAR386 Page3 of 62 1. Test Laboratory 1.1. Testing Location Com…

Text truncated - open the document above for the full version.