RAD310Tablet

1 You have purchased a product which uses the open source (http://opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code and other open source programs licensed under the GNU General Public License and Apache License. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCT. You may download the source codes from http://sourceforge.net/projects/alcatel/files/. The provision of the source code is free of charge from internet. English: CJB16L0ALAAC 2 www.sar-tick.com This device meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found on page 19 of this user guide. When carrying the device or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 0.5 cm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not using it. Prolonged exposure to music at full volume on the music player may damage the listener's hearing. Set your device volume safely. Table of contents 1 Your device..................................................................................................................................................................................................................3 1.1 appearance illustration...........................................................................................................................................................................................3 1.2 home screen............................................................................................................................................................................................................6 1.3 apps and widgets.....................................................................................................................................................................................................8 1.4 basic operation........................................................................................................................................................................................................9 2 Settings.....................................................................................................................................................................................................................13 2.1 Device.....................................................................................................................................................................................................................13 2.2 Personal..................................................................................................................................................................................................................13 2.3 System.....................................................................................................................................................................................................................14 3 1 Your device ................................................................... 1.1 Appearance illustration Volume Up/Down Power Key Micro-USB Connector/ Battery charge Camera Microphone Earphone Interface 4 Reset SD CardRemovable Frame 5 Note Please charge before first use. Normally, long press the Power key will power the pad on and the Home Screen will show up, but a battery icon will show instead of the Home Screen when the pad is lack of power, that indicates you should charge before use. Use only charger recommended by TCT Mobile Limited and its affiliates. 1.2 Home screen Your device includes five pages of Home screen giving you more space to add your own favorite apps, folders, and widgets for one-touch access. To switch between screens, sliding your finger to left or right. ● Lock/Unlock your screen Once your device is powered on, it shows a locked screen interface, which is set as default. Touch the locked icon , then a circle will shows around it. Touch and hold the locked icon , drag it to the lock icon at the right of the circle, home screen is unlocked. 6 ● Icons on your screen IconNameDescription Google searchTouch it to access the Google search engine. Voice actionsUse Voice Actions to watch a video, send email, set alarm, get directions, etc. All appsTouch to show all apps list interface. BackGo back to the previous menu or screen. HomeReturn to the home screen. Background programPress to view background program list. Wi-FiPress to view Wi-Fi connection 7 1.3 On the right of the screen bottom, there is a notification bar . A hidden menu will popup when you press the bar, which includes time, date, network connection and battery information, etc. For further operation, you can press setting. 1.4 Apps and widgets ● Apps The Applications (apps) list contains all pre-embedded and newly installed apps. To access the apps list, touch the all apps key from Home screen. ● Widgets Touch the Widgets tab at the top of All apps screen or slide left at All apps screen, you can switch to widgets interface. ● Get more apps Touch the Google play store icon to get more apps. ● Create and manage shortcut on desktop Touch and hold an icon on All Apps or widgets interface, it will jump to home screen automatically, drag it to the right place you want. Overlap icons together will build a folder. You can name the folder by touching the tap under the icons. 8 ● Remove apps icon from desktop Touch and hold the icon you want to delete from the desktop, drag it right over the " ", which appears right in the middle of the screen top. ● Uninstall apps Press to enter all Apps, then touch and hold the Apps icon you want to uninstall, drag it over the , which appeas top-left in the desktop. 1.5 Basic Operation ● Power on your device Long press the Power key until the pa…

Text truncated - open the document above for the full version.

4/F, South Building,No.2966, Jinke Road, Zhangjiang High-Tech Park, Pudong, Shanghai, 201203, P.R.China, TEL: +86(0)21 61460666 FAX: +86(0)21 61460600 We, TCT Mobile Limited, declare that this EUT (FCC ID: RAD310) doesn’t have Ad Hoc Mode function on “non-US/Canada frequencies”. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America Country code selection is disabled Should you have any questions or comments regarding this matter, please have my best attention, Sincerely Yours, Zhizhou Gong Project Manager

Date: Jan. 9, 2013 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The TCT Mobile Limited. ,the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen Morlab Communications Technology Co., Ltd.,, to act on the behalf of the TCT Mobile Limited. solely in matters relating to the application for an FCC equipment authorization for FCC ID # RAD310 including the signing of documents in connection with this Application. Necessary acts carried out by TCT Mobile Limited.on our behalf of the TCT Mobile Limited.in connection with the Application shall have the same effect as acts of the TCT Mobile Limited.. The TCT Mobile Limited.also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Yours Sincerely, Zhizhou Gong Project Manager

Date: Jan 9, 2013 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: TCT Mobile Limited FCC ID: RAD310 FCC Part 15C Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457& 0.459 pertaining to confidentiality material. TCT Mobile Limited requests that the following documents regarding this submission for FCC ID: RAD310 be kept confidential: Exhibit Type File Name Block Diagram CONF APPENDIX RAD310_Block Diagram.pdf Schematics CONF APPENDIX RAD310_Schematics.pdf Operational Description CONF APPENDIX RAD310_Operational Description.pdf Part list CONF APPENDIX RAD310_BOM.pdf Tune-Up-Procedure CONF APPENDIX RAD310_Tune up procedure.pdf Those documents contain detailed system and equipment description and related information about the product which TCT Mobile Limited considers to be confidential proprietary, a custom design and , otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, TCT Mobile Limited considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, Zhizhou Gong Project Manager

External Photos 1. EUT full view with accessories 2. EUT front view 3. EUT rear view 4. EUT left side view 5. EUT right side view 6. EUT top view 7. EUT bottom view

FCC ID: RAD310 Label FCC ID Size: 15*3mm Label Location

Internal Photos 1. EUT uncover view 2. Mainboard front view with shielding 3. Mainboard rear view with shielding 4. Mainboard front view without shielding 5. Mainboard rear view without shielding 6. BT/WIFI chip view 7. BT/WIFI antenna view 8. LCD screen view

SZ12120136S01 Page 2 of 37 DIRECTORY DIRECTORY....................................................................................................................................2 TESTING LABORATORY.............................................................................................................4 1.1. Identification of the Responsible Testing Laboratory................................................................. 4 1.2. Identification of the Responsible Testing Location.....................................................................4 1.3. Accreditation Certificate..............................................................................................................4 1.4. List of Test Equipments...............................................................................................................4 2. TECHNICAL INFORMATION..................................................................................................5 2.1. Identification of Applicant...........................................................................................................5 2.2. Identification of Manufacturer.....................................................................................................5 2.3. Equipment Under Test (EUT)......................................................................................................5 2.3.1. Photographs of the EUT............................................................................................................5 2.3.2. Identification of all used EUT...................................................................................................5 2.4. Applied Reference Documents.................................................................................................... 6 2.5. Device Category and SAR Limits................................................................................................6 2.6. Test Environment/Conditions......................................................................................................7 3. SPECIFIC ABSORPTION RATE (SAR)...................................................................................8 3.1. Introduction..................................................................................................................................8 3.2. SAR Definition............................................................................................................................ 8 4. SAR MEASUREMENT SETUP..................................................................................................9 4.1. The Measurement System............................................................................................................9 4.2. Probe............................................................................................................................................ 9 4.3. Probe Calibration Process..........................................................................................................11 4.3.1 Dosimetric Assessment Procedure...........................................................................................11 4.3.2 Free Space Assessment Procedure...........................................................................................11 4.3.2 Temperature Assessment Procedure........................................................................................11 4.4. Phantom..................................................................................................................................... 12 4.5. Device Holder............................................................................................................................12 5. TISSUE SIMULATING LIQUIDS........................................................................................... 13 6. UNCERTAINTY ASSESSMENT............................................................................................. 15 6.1. UNCERTAINTY EVALUATION FOR EUT SAR TEST....................................................... 15 6.2. UNCERTAINTY FOR SYSTEM PERFORMANCE CHECK................................................ 16 7. SAR MEASUREMENT EVALUATION................................................................................. 18 SZ12120136S01 Page 3 of 37 7.1. System Setup..............................................................................................................................18 7.2. Validation Results......................................................................................................................19 8. OPERATIONAL CONDITIONS DURING TEST..................................................................20 8.1. Body-worn Configurations........................................................................................................ 20 8.2. Measurement procedure.............................................................................................................20 8.3. Description of interpolation/extrapolation scheme....................................................................21 9.Measurement Of Conducted Peak Output Power..........................................................................22 10. TEST RESULTS LIST.............................................................................................................23 ANNEX A EUT SETUP PHOTOS................................................................................................24 ANNEX B GRAPH TEST RESULTS...........................................................................................27 Change History IssueDateReason for change 1.0Jan. 15, 2013First edition SZ12120136S01 Page 4 of 37 Testing Laboratory 1.1. Identification of the Responsible Testing Laboratory Company Name:Shenzhen Morlab Communications Technology Co., Ltd. Department:Morlab Laboratory Address:FL.1, Building A, FeiYang Science Park, Block 67, BaoAn District Responsible Test Lab Manager:Mr. Shu Luan Telephone:+86 755 36698…

Text truncated - open the document above for the full version.

SZ12120136W02 Page 2 of 74 DIRECTORY 1. GENERAL INFORMATION .................................................................................................... 3 1.1. EUT Description ....................................................................................................................... 3 1.2. Test Standards and Results ........................................................................................................ 4 1.3. Facilities and Accreditations ..................................................................................................... 5 2. 47 CFR PART 15C REQUIREMENTS .................................................................................... 6 2.1. Peak Output Power.................................................................................................................... 6 2.2. Bandwidth ................................................................................................................................. 8 2.3. Conducted Spurious Emissions ............................................................................................... 17 2.4. Power spectral density (PSD) ................................................................................................. 26 2.5. Band Edge ............................................................................................................................... 35 2.6. Conducted Emission ............................................................................................................... 47 2.7. Radiated Emission................................................................................................................... 50 2.8. RF exposure evaluation ........................................................................................................... 74 Change History Issue Date Reason for change 1.0 January 16 2013 First edition 2.0 January 18 2013 Second edition 3.0 January 25 2013 Third edition SZ12120136W02 Page 3 of 74 1. General Information 1.1. EUT Description EUT Type ............................. : Tablet Serial No. .............................. : (n.a, marked #1 by test site) Hardware Version ................. : V06 Software Version .................. : Applicant .............................. : Manufacturer ........................ : V1.5.8 TCT Mobile Limited 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Area, Shanghai, P.R. China. 201203 TCL COMMUNICATION TECHNOLOGY HOLDINGS LIMITED. 70 Huifeng 4rd,ZhongKai Hi-tech Development District ,Huizhou,Guangdong 516006 P.R.China Frequency Range .................. : 802.11b/g/n-20MHz: 2.412GHz - 2.462GHz 802.11n-40MHz: 2.422GHz - 2.452GHz Channel Number................... : 802.11b/g/n-20MHz: 11 802.11n-40MHz: 7 Modulation Type .................. : DSSS (802.11b), OFDM (802.11g/n) Antenna Type ........................ : PIFA Antenna Antenna Gain ........................ : 0dBi Note 1: The EUT is Tablet, it contains WIFI Module operating at 2.4GHz ISM band; it supports 802.11b, 802.11g, 802.11n and they are all tested in this report. Note 2: The frequencies allocated is F (MHz) =2412+5*(n-1) (1<=n<=11). The lowest, middle, highest channel numbers of the EUT used and tested in this report are separately 1 (2412MHz), 6 (2437MHz) and 11 (2462MHz). Note 3: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. Note 4: The antenna connector of EUT is designed with permanent attachment and no consideration of replacement. SZ12120136W02 Page 4 of 74 1.2. Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart C (Wi-Fi, 2.4GHz ISM band radiators) for the EUT FCC ID Certification: No. Identity Document Title 1 47 CFR Part 15 (10-1-09 Edition) Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 15.247(b) Peak Output Power PASS 2 15.247(a) Bandwidth PASS 3 15.247(d) Conducted Spurious Emission PASS 4 15.247(d) Band Edge PASS 5 15.207 Conducted Emission PASS 6 15.209 ,15.247(c) Radiated Emission PASS 7 15.247(d) Power spectral density (PSD) PASS 8 15.247(i), 1.1307&2.1093 RF exposure evaluation PA S S The tests of Conducted Emission and Radiated Emission were performed according to the method of measurements prescribed in ANSI C63.4 2009. These RF tests were performed according to the method of measurements prescribed in KBD558074. SZ12120136W02 Page 5 of 74 1.3. Facilities and Accreditations 1.3.1. Facilities Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L3572. All measurement facilities used to collect the measurement data are located at FL.1, Building A, FeiYang Science Park, Block 67, BaoAn District, Shenzhen, 518101 P. R. China. The test site is constructed in conformance with the requirements of ANSI C63.10 2009, ANSI C63.4 2009 and CISPR Publication 22; the FCC registration number is 695796. 1.3.2. Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 -60 Atmospheric Pressure (kPa): 86-106 SZ12120136W02 Page 6 of 74 2. 47 CFR Part 15C Requirements 2.1. Peak Output Power 2.1.1. Requirement According to FCC section 15.247(b)(3), For systems using digital modulation in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz bands: The maximum peak conducted output power of the intentional radiator shall not exceed1 Watt. 2.1.2. Test Description The measured output power was calculated by the reading of the Power Meter and calibration. A. Test Setup: The EUT (Equipment under the test) which is powered by the Battery is coupled to the Power Meter; the RF load attached…

Text truncated - open the document above for the full version.

Test Setup Photos 1. Conducted emission main’s port front view 2. Conducted emission main’s port side view 3. Radiated emission (9KHz-30MHz) 4. Radiated emission (30MHz-1GHz) 5. Radiated emission (above 1GHz) 6. Conducted emission antenna’s port