RAD356HSUPA/HSDPA/UMTS triband/GSM quadband mobile phone

1 English - CJB1746ALAAA Quick Start Guide For more information about how to use the cellphone, please go to www.alcatelonetouch.com to download complete user manual (English version only). Also on our website you can find helpful FAQs (English version only). 5020W IP4533_5020W_QG_Eng_USA_13_130531.indd 1IP4533_5020W_QG_Eng_USA_13_130531.indd 12013-5-31 9:40:592013-5-31 9:40:59 23 Table of contents 1 Your mobile ..................................................................... 3 2 Text input ...................................................................... 14 3 Phone call ...................................................................... 15 4 People ............................................................................ 17 5 Messaging....................................................................... 18 6 Email .............................................................................. 19 7 Getting connected ........................................................ 20 8 Locate my location using GPS satellites ...................... 23 9 Data backup .................................................................. 23 10 Factory data reset ....................................................... 24 11 Applications & Internal storage .................................. 24 12 Making the most of your phone .................................. 25 Safety and use ......................................................................... 27 General information .............................................................. 34 TCT Mobile (US), Inc. Warranty .......................................... 35 Troubleshooting...................................................................... 37 Your mobile 1 .................. Keys and connectors1.1 Headset connector Power key PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. Back key Front camera Home key Recent apps key Touch screen www.sar-tick.com This product meets applicable national SAR limits of 1.6W/kg. The specific maximum SAR values can be found in the RADIOWAVES section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 1.0 cm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. IP4533_5020W_QG_Eng_USA_13_130531.indd 2-3IP4533_5020W_QG_Eng_USA_13_130531.indd 2-32013-5-31 9:40:592013-5-31 9:40:59 45 Volume up Volume down Camera Micro-USB connector Recent apps key Displays recently used apps list, touch app in list to • open app. To remove an app from list drag app to left or right side. Touch and hold: As • Menu key, touch and hold it to access Wallpaper, Manage applications and Settings. Home key While on any application or screen, touch to return • to the Home screen. Back key Touch to go back to the previous screen or to close a • dialog box, options menu, the notification panel, etc. These keys are visible when the screen lights up. Power key Press: Lock the screen/Light up the screen• Press and hold: Show the pop-up menu to select • from Power off/Restart/Airplane mode/Quick start/ Ringer mode Press and hold: Power on• Press and hold• Power key and Volume down key to capture a screenshot. Press to mute the ringtone when there’s an incoming • call. Volume keys In call mode adjusts the earpiece or headset volume.• In Music/Video/Streaming mode adjusts the media • volume. In general mode adjusts the ring tone volume.• Mutes the ringtone of an incoming call.• In Camera mode use as capture key to take a photo and • start or stop video recording. Press to light up dim screen during a call.• IP4533_5020W_QG_Eng_USA_13_130531.indd 4-5IP4533_5020W_QG_Eng_USA_13_130531.indd 4-52013-5-31 9:40:592013-5-31 9:40:59 67 Getting started1.2 Set-up1.2.1 Removing or installing the back cover Inserting or removing the SIM card You must insert your SIM card to make phone calls. Please power off your phone before inserting or removing the SIM card. To install, place the SIM card with chip facing downwards. Make sure that it is correctly inserted. To remove the card, press and slide it out. Installing or removing the battery Please power off your phone before removing the battery. Insert battery into slot until locked in position, then close the • battery cover. Remove battery cover and unlock battery from slot, then remove.• Installing or removing the microSD card To insert external microSD card, slide microSD card metal tray to right position to unlock, then place microSD card in slot with gold contact facing down, then slide metal tray to left position to lock microSD card in place. To remove external microSD card repeat steps above and remove card, ensure metal tray is in lock position before replacing battery. Charging the battery Connect the battery charger to your phone, then the charging icon will show on the right of status bar. The charging icon will not display if your battery is completely consumed. To reduce power consumption and energy waste, when battery is fully charged disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. IP4533_5020W_QG_Eng_USA_13_130531.indd 6-7IP4533_5020W_QG_Eng_USA_13_130531.indd 6-72013-5-31 9:41:002013-5-31 9:41:00 89 Power on your phone1.2.2 Hold down the Power key until the phone powers on, it will take a few seconds before the screen lights up. Set up your phone for the first time The first time you power on the phone, you should set following options: language, date & time, Google account, Google location, etc. If you power on your phone with no SIM card inserted, you will see a screen giving you the option to connect to a Wi-Fi network to…

Text truncated - open the document above for the full version.

5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 Date 2013-5-15 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: TMC (Telecommunication Metrology Center of MIIT) is authorized to act on our behalf, until otherwise notified, for applications to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Gong Zhizhou Approval Team Leader TCT Mobile Limited

5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 2013-05-17 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: RAD356 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou Gong Approval Team Leader TCT Mobile Limited

EUT photograph Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Battery AE1 Battery AE1 Charger AE3 Label of Charger AE3 Headset AE10 Headset AE11 Headset AE12 Headset AE13 Data Cable AE14 Data Cable AE15 Data Cable AE16 Data Cable AE17

Mobile Phone

EUT Interior photograph Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly

No.2013SAR00077 Page 1 of 126 ©Copyright. All rights reserved by TMC Beijing. SAR TEST REPORT No. 2013SAR00077 For TCT Mobile Limited HSUPA/HSDPA/UMTS triband/GSM quadband mobile phone Model Name: Megane 1SIM AWS Marketing Name：ONE TOUCH 5020W with Hardware Version: PIO Software Version: v2I55-0 FCC ID: RAD356 Issued Date: 2013-05-29 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: TMC Beijing, Telecommunication Metrology Center of MIIT No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2079, Fax:+86(0)10-62304633 Email:[email protected]. www.emcite.com No. 2013SAR00077 Page 2 of 126 Revision Version Report Number Revision Date Memo 2013SAR00077 00 2013-05-29 Initial creation of test report No. 2013SAR00077 Page 3 of 126 TABLE OF CONTENT 1 TEST LABORATORY ................................................................................................................. 5 1.1 TESTING LOCATION ........................................................................................................................................ 5 1.2 TESTING ENVIRONMENT ................................................................................................................................. 5 1.3 PROJECT DATA ............................................................................................................................................... 5 1.4 SIGNATURE ..................................................................................................................................................... 5 2 STATEMENT OF COMPLIANCE ................................................................................................ 6 3 CLIENT INFORMATION.............................................................................................................. 8 3.1 APPLICANT INFORMATION .............................................................................................................................. 8 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 8 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................ 9 4.1 ABOUT EUT ................................................................................................................................................... 9 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 9 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ........................................................................... 10 5 TEST METHODOLOGY ............................................................................................................ 10 5.1 APPLICABLE LIMIT REGULATIONS ................................................................................................................ 10 5.2 APPLICABLE MEASUREMENT STANDARDS .................................................................................................... 10 6 SPECIFIC ABSORPTION RATE (SAR) .................................................................................... 11 6.1 INTRODUCTION ............................................................................................................................................. 11 6.2 SAR DEFINITION .......................................................................................................................................... 11 7 TISSUE SIMULATING LIQUIDS ............................................................................................... 12 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 12 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 12 8 SYSTEM VERIFICATION .......................................................................................................... 16 8.1 SYSTEM SETUP ............................................................................................................................................. 16 8.2 SYSTEM VERIFICATION ................................................................................................................................. 17 9 MEASUREMENT PROCEDURES ............................................................................................ 18 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 18 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 19 9.3 WCDMA MEASUREMENT PROCEDURES FOR SAR ...................................................................................... 20 9.4 BLUETOOTH & WI-FI MEASUREMENT PROCEDURES FOR SAR .................................................................... 21 9.5 POWER DRIFT ............................................................................................................................................... 21 10 AREA SCAN BASED 1-G SAR .............................................................................................. 22 10.1 REQUIREMENT OF KDB .............................................................................................................................. 22 10.2 FAST SAR ALGORITHMS ............................................................................................................................ 22 11 CONDUCTED OUTPUT POWER ............................................................................................ 23 No. 2013SAR00077 Page 4 of 126 11.1 MANUFACTURING T…

Text truncated - open the document above for the full version.

No. 2013SAR00077 Page 61 of 126 Fig. 7-1 Z-Scan at power reference point (WCDMA 1700 CH1412) No. 2013SAR00077 Page 62 of 126 WCDMA 1700 Body Rear High Date: 2013-5- 24 Electronics: DAE4 Sn771 Medium: Body 1750 MHz Medium parameters used (interpolated): f = 1752.6 MHz; σ = 1.516 mho/m; εr = 52.149; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: WCDMA1700; Frequency: 1752.6 MHz; Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.63, 7.63, 7.63) Rear High/Area Scan (61x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.19 W/kg Rear High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.525 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 1.55 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.628 W/kg Maximum value of SAR (measured) = 1.11 W/kg Fig.8 WCDMA 1700 CH1513 No. 2013SAR00077 Page 63 of 126 Fig. 8-1 Z-Scan at power reference point (WCDMA1700 CH1513) No. 2013SAR00077 Page 64 of 126 WCDMA 1900 Right Cheek Low Date: 2013-5- 23 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.371 mho/m; εr = 39.175; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: WCDMA 1900 Frequency: 1852.4 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(8.01, 8.01, 8.01) Cheek Low/Area Scan (61x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.597 W/kg Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.994 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 0.895 W/kg SAR(1 g) = 0.562 W/kg; SAR(10 g) = 0.326 W/kg Maximum value of SAR (measured) = 0.604 W/kg Fig.9 WCDMA1900 CH9262 No. 2013SAR00077 Page 65 of 126 Fig. 9-1 Z-Scan at power reference point (WCDMA1900 CH9262) No. 2013SAR00077 Page 66 of 126 WCDMA 1900 Body Rear High Date: 2013-5- 23 Electronics: DAE4 Sn771 Medium: Body 1900 MHz Medium parameters used (interpolated): f = 1907.6 MHz; σ = 1.538 mho/m; εr = 52.611; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: WCDMA 1900 Frequency: 1907.6 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.37, 7.37, 7.37) Rear High/Area Scan (61x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.32 W/kg Rear High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.652 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 1.88 W/kg SAR(1 g) = 1.18 W/kg; SAR(10 g) = 0.693 W/kg Maximum value of SAR (measured) = 1.31 W/kg Fig.10 WCDMA1900 CH9538 No. 2013SAR00077 Page 67 of 126 Fig. 10-1 Z-Scan at power reference point (WCDMA1900 CH9538) No. 2013SAR00077 Page 68 of 126 Wifi 802.11b 1Mbps Right Cheek Channel 6 Date/Time: 4/18/2013 12:21:20 AM Communication System: 802.11b; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.85 mho/m; ε r = 38.6; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Right Section DASY4 Configuration: Sensor-Surface: 4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3578; ConvF(6.43, 6.43, 6.43); Calibrated: 6/21/2012 Electronics: DAE4 Sn1317; Calibrated: 1/25/2013 Phantom: SAM2; Type: SAM; Serial: TP-1524 Measurement SW: DASY5, V5.2 Build 162; SEMCAD X Version 14.0 Build 59 Right/Cheek Middle/Area Scan (61x101x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.159 W/kg Right/Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.52 V/m; Power Drift = 0.055 dB Peak SAR (extrapolated) = 0.296 W/kg SAR(1 g) = 0.147 W/kg; SAR(10 g) = 0.075 W/kg Maximum value of SAR (measured) = 0.156 W/kg Fig.11 2450 MHz CH6 No. 2013SAR00077 Page 69 of 126 Fig. 11-1 Z-Scan at power reference point (2450 MHz CH6) No. 2013SAR00077 Page 70 of 126 Wifi 802.11b 1Mbps Body Left Edge Channel 6 Date/Time: 4/18/2013 12:06:19 PM Communication System: 802.11b; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.88 mho/m; ε r = 51.7; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY4 Configuration: Sensor-Surface: 4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3578; ConvF(6.43, 6.43, 6.43); Calibrated: 6/21/2012 Electronics: DAE4 Sn1317; Calibrated: 1/25/2013 Phantom: SAM2; Type: SAM; Serial: TP-1524 Measurement SW: DASY5, V5.2 Build 162; SEMCAD X Version 14.0 Build 59 Left Edge Middle /Area Scan (31x101x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.123 W/kg Left Edge Middle /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.12 V/m; Power Drift = 0.075 dB Peak SAR (extrapolated) = 0.221 W/kg SAR(1 g) = 0.107 W/kg; SAR(10 g) = 0.054 W/kg Maximum value of SAR (measured) = 0.116 W/kg Fig.12 2450 MHz CH6 No. 2013SAR00077 Page 71 of 126 ANNEX B System Verification Results 835MHz Date: 2013-5- 22 Electronics: DAE4 Sn771 Medium: Head 850 MHz Medium parameters used: f = 835 MHz; σ = 0.925 mho/m; ε r = 40.37; ρ = 1000 kg/m 3 Ambient Temperature: 22.8 o C Liquid Temperature: 22.3 o C Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(9.18, 9.18, 9.18) System Validation /Area Scan (81x161x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 49.956 V/m; Power Drift = 0.13 dB Fast SAR: SAR(1 g) = 2.28 W/kg; SAR(10 g) = 1.49 W/kg Maximum value of SAR (interpolated) = 2.45 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 49.956 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 3.398 W/kg SAR(1 g) = 2.26 W/kg; SAR(10 g) = 1.48 W/kg Maximum value of SAR (measured) = 2.45 W/kg 0 dB = 2.45 W/kg = 7.78 dB W/kg Fig.B.1 validation 835MHz 250mW No. 2013SAR00077 Page 72 of 126 835MHz Date: 2013-5- 22 Electronics: …

Text truncated - open the document above for the full version.

No. 2013TAR411 Page1 of 80 TEST REPORT No. 2013TAR411 for TCT Mobile Limited HSUPA/HSDPA/UMTS triband/GSM quadband mobile phone Model Name: Megane 1SIM AWS Marketing Name: ONE TOUCH 5020W FCC ID : RAD356 with Hardware Version: PIO Software Version: v2I55-0 Issued Date: 2013-05-28 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. D-PL-12123-01-01 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629B TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Tel:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No. 2013TAR411 Page2 of 80 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. NORMAL ACCESSORY SETTING ............................................................................................... 6 3.5. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER ............................................................................................................................ 11 A.2 EMISSION LIMIT ........................................................................................................................... 17 A.3 CONDUCTED EMISSION ............................................................................................................. 23 A.4 FREQUENCY STABILITY ............................................................................................................... 28 A.5 OCCUPIED BANDWIDTH .............................................................................................................. 30 A.6 EMISSION BANDWIDTH ................................................................................................................ 42 A.7 BAND EDGE COMPLIANCE .......................................................................................................... 54 A.8 CONDUCTED SPURIOUS EMISSION............................................................................................ 60 No. 2013TAR411 Page3 of 80 1. Test Laboratory 1.1. Testing Location Company Name: TMC Beijing, Telecommunication Metrology Center of MIIT Address: 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China Postal Code: 100191 Telephone: 00861062304633 Fax: 00861062304793 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2013-05-20 Testing End Date: 2013-05-24 1.4. Signature Zi Xiaogang (Prepared this test report) Sun Xiangqian (Reviewed this test report) Lu Bingsong Deputy Director of the laboratory (Approved this test report) No. 2013TAR411 Page4 of 80 2. Client Information 2.1. Applicant Information Company Name: TCT Mobile Limited Address /Post: 12F/B, TCL Tower, Gaoxin Nanyi Road, Nanshan District, Shenzhen, Guangdong, P.R. China. 518057 Contact: Lv Meixian Email: [email protected] Telephone: 0086-755-33956929 Fax: 0086-755-36645072 2.2. Manufacturer Information Company Name: TCT Mobile Limited Address /Post: 12F/B, TCL Tower, Gaoxin Nanyi Road, Nanshan District, Shenzhen, Guangdong, P.R. China. 518057 Contact: Lv Meixian Email: [email protected] Telephone: 0086-755-33956929 Fax: 0086-755-36645072 No. 2013TAR411 Page5 of 80 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description HSUPA/HSDPA/UMTS trib…

Text truncated - open the document above for the full version.

No.2013TAR412 Page1 of 81 TEST REPORT No. 2013TAR412 for TCT Mobile Limited HSUPA/HSDPA/UMTS triband/GSM quadband mobile phone Model Name: Megane 1SIM AWS Marketing Name: ONE TOUCH 5020W FCC ID : RAD356 with Hardware Version: PIO Software Version: v2I55-0 Issued Date: 2013-05-28 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. D-PL-12123-01-01 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629B TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Tel:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No.2013TAR412 Page2 of 81 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. NORMAL ACCESSORY SETTING ............................................................................................... 6 3.5. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER ................................................................................................................…

Text truncated - open the document above for the full version.