RAD366GSM Fix Wireless Phone

SAR values can be found on page 19 of this limits of 1.6 W/kg. The specific maximum 1234567 131489101112 1 Your mobile .............. 1.1 Keys Navigation key Confirm an option (press the middle of the key) Send call Access to call log (idle screen) Power on/off the handset (long keypress) End call Return to idle Left softkey Right softkey Dial the voicemail number (long keypress) From Idle screen - Short keypress: enter zero - Long keypress: +, "+" are used for dialing an international call In Edit mode: - Short keypress: " " (space) (text edit mode) 0 (Add numbers) From Idle screen - Short keypress: * - Press for twice: Input P/W, "P" and "W" are used for calling the extension - Press then press key: lock keypad - Press then press : unlock keypad In Edit mode: - Short keypress: access the Symbols table From Idle screen - Short keypress: # In Edit mode: - Short keypress: change input methods From Idle screen - Short keypress: dial ‘5’ 1.2 Idle screen icons Battery charge level. Indoor mode: your phone rings, but neither vibrates nor beeps and the melody is calm singing. Normal mode: your phone rings, but neither vibrates nor beeps. Silence mode: your phone neither rings, beeps nor vibrates. Alarm clock programmed. Voicemail message arrived. Missed calls. Roaming. Level of network reception. Message unread. Call divert. Message full. 2.2 Power on your phone Hold down the key until the phone powers on. 2.3 Power off your phone Hold down the key from the main screen. ALCATEL 1015 This product meets applicable national SAR user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 1.5 cm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. 6 FM radio ............. Your phone is equipped with a radio with RDS functionality. You can use the application as a traditional radio with saved channels. In FM radio interface, press and to tune volume. 7 Tools ................... 7.1 Calculator Press the up, down, left, right and OK key to select +, -, ×, ÷ and = respectively. Press to delete the figure. 7.2 World clock Access this menu to view time of main cities in various time zones. Quick Start Guide For more information about how to use the phone, please go to www.alcatelonetouch.com to download complete user manual (English version only). Moreover, from the website you can also consult FAQ (English version only). Prolonged exposure to music at full volume on the music player may damage the listener's hearing. Set your phone volume safely. Use only headphones recommended by TCT Mobile Limited and its affiliates. www.sar-tick.com English - CJB17X0ALAAA 4 Call logs ............... You can access your call memory by pressing from the idle screen, or press the key and select the icon from the menu. In this menu, you will see Dialed call(s), Received call(s) ,Missed call(s) ,Rejected call(s). 5 Contacts ............. 5.1 Consulting your contacts To access the directory from the idle screen, press the key and select the icon from the menu. The complete contacts are available in this menu. 5.2 Adding a contact Select the directory in which you wish to create a file, press the “Options” softkey, select “New” then . 3 Calls .......................... 3.1 Making a call Dial the desired number, press the key to place the call. If you make a mistake, you can delete the incorrect digits by pressing the . To hang up the call, press the key. Making an emergency call If your phone is covered by the network, dial emergency number and press the key to make an emergency call. This works even without a SIM card and without typing the PIN code or unlocking the keypad. 3.2 Calling your voicemail (1) To access your voicemail, hold down the key. 3.3 Receiving a call When you receive an incoming call, press the key to talk and then hang up using the key. 3.4 Available functions during the call During a call, you can use your directory, short messages, etc. without losing your correspondent. (1) Contact your network operator to check service availability. 2 Getting started ......... 2.1 Set-up Removing and installing the back cover Removing and installing the battery Inserting and removing the SIM card Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, push it and slide it out. 7.3 Timer Set a time, and the timer will remind you as soon as the time run out. 7.4 STK STK service is the tool kit of SIM card. This phone supports the service function. The specific items depend on SIM card and network. Service menu will be automaticly add into the phone menu when supported by network and SIM card. 8 Message ............... Create SMS From the main menu select “Write message” to create text message. You can type a message and select to send it to a recipient in the directory. You can type a message, and you're also able to insert a pre- defined message from “Templates”. While writing a message, select “Options” to access all the messaging options. Specific letters (accent) will increase the size of the SMS, this may cause multiple SMS to be sent to your recipient. 9 Profiles ................ With this menu, you may personalize ringtones for different events and environments. Charging the battery Connect the battery charger to your phone and mains socket respectively. The charging may take about 20 minutes to start if the • battery is flat. Be careful not to force the plug into the socket.• Make sure the battery is correctly inserted before • connecting the charger. The mains socket must be near to the phone and easily • accessible (avoid electric extension cables). When using your telephone for the first time, charge the • battery fully (approximately 3 hours). You are advised to fully charge the battery ( ). To reduce power consumption and ener…

Text truncated - open the document above for the full version.

Date: 22 April, 2013 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: TCT Mobile Limited FCC ID: RAD366 FCC Part 22 Certification FCC Part 24 Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material.TCT Mobile Limited requests that the following documents regarding this submission for FCC ID: RAD366 be kept confidential: Exhibit Type File Name Block Diagram CONF APPENDIX RAD366_Block Diagram.pdf Schematics CONF APPENDIX RAD366 _Schematics.pdf Operational Description CONF APPENDIX RAD366 _Operational Description.pdf Part list CONF APPENDIX RAD366 _BOM.pdf Tune-Up-Procedure CONF APPENDIXRAD366 _Tune up procedure.pdf Those documents contain detailed system and equipment description and related information about the product which TCT Mobile Limited considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, TCT Mobile Limited considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Signatory Gong ZhiZhou TCT Mobile Limited

Date: 22 April, 2013 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: TCT Mobile Limited the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of TCT Mobile Limited solely in matters relating to the application for an FCC equipment authorization for FCC ID: RAD366including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen Morlab Communications Technology Co., Ltd on our behalf of TCT Mobile Limited in connection with the Application shall have the same effect as acts of TCT Mobile Limited. TCT Mobile Limited also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Signatory Gong ZhiZhou Validation Project Manager TCT Mobile Limited

TCT Mobile Limited Date: April 28, 2013 Equipment Authorization Division Office of Engineering and Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: RAD366 Dear Sirs: TCT Mobile Limited. requests acceptance of the labeling proposal described below for GSM fixed wireless phone bearing FCC identifier RAD366. The subject GSM fixed wireless phone are compact handheld models as shown in figure 1, authorized under 47CFR Part 22H&24E for GSM mobile services. Figure 1. Because the majority of the GSM fixed wireless phone housing is composed of indicators, display screen and keys, there is extremely limited space available to attach the required label carrying the FCC identifier. TCT Mobile Limited. proposes placing the label carrying the FCC identifier inside product body as shown in figure 2. Figure 2. The consumer packaging for these models is a "gift box" which does not allow the GSM fixed wireless phone to be seen at time of purchase. In order to meet the requirements of TCT Mobile Limited 47CFR Part 2.925 (d), TCT Mobile Limited. will add the FCC identifier "RAD366" to the outside of the consumer "gift box" packaging. Thank you for your attention to this matter. Yours Sincerely, Zhizhou Gong Project Engineer

External Photos 1. EUT full view with accessories 2. EUT front view 3. EUT rear view 4. EUT left side view 5. EUT right side view 6. EUT top view 7. EUT bottom view

Internal Photos 1. EUT uncover view -1 2. EUT uncover view -2 3. Mainboard front view with shielding 4. Mainboard front view without shielding 5. Mainboard rear view-1 6. Mainboard rear view-2 7. CPU chip view 8. GSM chip view 9. GSM antenna view 10. Battery

SZ13030207S01 Page 2 of 61 DIRECTORY DIRECTORY....................................................................................................................................2 1. TESTING LABORATORY.........................................................................................................4 1.1. Identification of the Responsible Testing Laboratory................................................................. 4 1.2. Identification of the Responsible Testing Location.....................................................................4 1.3. Accreditation Certificate..............................................................................................................4 1.4. List of Test Equipments...............................................................................................................4 2. TECHNICAL INFORMATION..................................................................................................5 2.1. Identification of Applicant...........................................................................................................5 2.2. Identification of Manufacturer.....................................................................................................5 2.3. Equipment Under Test (EUT)......................................................................................................5 2.3.1. Photographs of the EUT............................................................................................................5 2.3.2. Identification of all used EUT...................................................................................................5 2.4. Applied Reference Documents.................................................................................................... 6 2.5. Device Category and SAR Limits................................................................................................6 2.6. Test Environment/Conditions......................................................................................................7 3. SPECIFIC ABSORPTION RATE (SAR)...................................................................................8 3.1. Introduction..................................................................................................................................8 3.2. SAR Definition............................................................................................................................ 8 4. SAR MEASUREMENT SETUP..................................................................................................9 4.1. The Measurement System............................................................................................................9 4.2. Probe............................................................................................................................................ 9 4.3. Probe Calibration Process..........................................................................................................11 4.3.1 Dosimetric Assessment Procedure...........................................................................................11 4.3.2 Free Space Assessment Procedure...........................................................................................11 4.3.2 Temperature Assessment Procedure........................................................................................11 4.4. Phantom..................................................................................................................................... 12 4.5. Device Holder............................................................................................................................12 5. TISSUE SIMULATING LIQUIDS........................................................................................... 13 6. UNCERTAINTY ASSESSMENT............................................................................................. 15 6.1. UNCERTAINTY EVALUATION FOR EUT SAR TEST....................................................... 15 6.2. UNCERTAINTY FOR SYSTEM PERFORMANCE CHECK................................................ 16 7. SAR MEASUREMENT EVALUATION................................................................................. 18 SZ13030207S01 Page 3 of 61 7.1. System Setup..............................................................................................................................18 7.2. Validation Results......................................................................................................................19 8. OPERATIONAL CONDITIONS DURING TEST..................................................................20 8.1. Informations on the testing........................................................................................................ 20 8.2. Body-worn Configurations........................................................................................................ 21 8.3. Measurement procedure.............................................................................................................21 8.4. Description of interpolation/extrapolation scheme....................................................................22 9. MEASUREMENT OF CONDUCTED PEAK OUTPUT POWER....................................... 23 10. TEST RESULTS LIST.............................................................................................................24 ANNEX A EUT SETUP PHOTOS................................................................................................25 ANNEX B GRAPH TEST RESULTS...........................................................................................29 Change History IssueDateReason for change 1.0Apr. 24, 2013First edition 1.0May 8, 2013 Second edition SZ13030207S01 Page 4 of 61 1. Testing Laboratory 1.1. Identification of the Responsible Testing Laboratory Company Name:Shenzhen Morlab Communications Technology Co., Ltd. Department:Morlab Laboratory…

Text truncated - open the document above for the full version.

Report No.: SZ13030207W01 Page 2 of 41 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................... 3 1.1 EUT Description ......................................................................................................................... 3 1.2 Test Standards and Results ........................................................................................................ 4 1.3 Facilities and Accreditations ...................................................................................................... 5 2. 47 CFR PART 2, PART 22H & 24E REQUIREMENTS ........................................................ 6 2.1 Conducted RF Output Power .................................................................................................... 6 2.2 Peak to Average Radio .............................................................................................................. 11 2.3 99% Occupied Bandwidth ....................................................................................................... 14 2.4 Frequency Stability ................................................................................................................... 18 2.5 Conducted Out of Band Emissions ......................................................................................... 20 2.6 Band Edge ................................................................................................................................. 27 2.7 Transmitter Radiated Power (EIRP/ERP) ............................................................................. 30 2.8 Radiated Out of Band Emissions ............................................................................................ 34 Change History Issue Date Reason for change 1.0 April 15, 2013 First edition Report No.: SZ13030207W01 Page 3 of 41 1. GENERAL INFORMATION 1.1 EUT Description EUT Type ............................. : GSM fix wireless phone Serial No. ............................. : (n.a, marked #1 by test site) Hardware Version................. : PIO Software Version .................. : Applicant .............................. : Manufacturer ........................ : V1.1 TCT Mobile Limited 5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TCL COMMUNICATION TECHNOLOGY HOLDINGS LIMITED 70 Huifeng 4rd, ZhongKai Hi-tech Development District, Huizhou, Guangdong 516006 P.R. China （TCL Mobile Communication Co., LTD. Huizhou） Frequency Range ................. : GSM 850MHz: Tx: 824.20 - 848.80MHz (at intervals of 200kHz); Rx: 869.20 - 893.80MHz (at intervals of 200kHz) GSM 1900MHz: Tx: 1850.20 - 1909.80MHz (at intervals of 200kHz); Rx: 1930.20 - 1989.80MHz (at intervals of 200kHz) Modulation Type .................. : GSM Mode with GMSK Modulation Multislot Class ..................... : N/A Antenna Type ....................... : PIFA Antenna Emission Designators .......... : GSM 850:252KGXW,GSM 1900:247KGXW Note 1: The transmitter (Tx) frequency arrangement of the Cellular 850MHz band used by the EUT can be represented with the formula F(n)=824.2+0.2*(n-128), 128<=n<=251; the lowest, middle, highest channel numbers (ARFCHs) used and tested in this report are separately 128 (824.2MHz), 190 (836.6MHz) and 251 (848.8MHz). Note 2: The transmitter (Tx) frequency arrangement of the PCS 1900MHz band used by the EUT can be represented with the formula F(n)=1850.2+0.2*(n-512), 512<=n<=810; the lowest, middle and highest channel numbers (ARFCHs) used and tested in this report are separately 512 (1850.2MHz), 661 (1880.0MHz) and 810 (1909.8MHz). Note 3: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. Report No.: SZ13030207W01 Page 4 of 41 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 2, Part 22 and Part 24 for the EUT FCC ID Certification: No. Identity Document Title 1 47 CFR Part 2 (10-1-09 Edition) Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 2 47 CFR Part 22 (10-1-09 Edition) Public Mobile Services 3 47 CFR Part 24 (10-1-09 Edition) Personal Communications Services Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 2.1046 Conducted RF Output Power PASS 2. 24.232(d) Peak to average radio PASS 2 2.1049,22.917 24.238, 99% Occupied Bandwidth PASS 3 2.1055,22.355 24.235, Frequency Stability PASS 4 2.1051,2.1057 22.917,24.238, Conducted Out of Band Emissions PASS 5 2.1051,2.1057 22.917,24.238 Band Edge PASS 6 22.913,24.232 Transmitter Radiated Power (EIPR/ERP) PASS 7 2.1053,2.1057 22.917,24.238 Radiated Out of Band Emissions PASS NOTE：Measurement method according to TIA/EIA 603.D-2010 Report No.: SZ13030207W01 Page 5 of 41 1.3 Facilities and Accreditations 1.3.1 Facilities Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L3572. All measurement facilities used to collect the measurement data are located at FL.1, Building A, FeiYang Science Park, No.8 LongChang Road,Block 67, BaoAn District, ShenZhen, GuangDong Province,P. R. China 518101. The test site is constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22; the FCC registration number is 695796. 1.3.2 Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 -60 Atmospheric Pressure (kPa): 86-106 Report No.: SZ13030207W01 Page 6 of 41 2. 47 CFR PART 2, PART 22H & 24E REQUIREMENTS 2.1 Conducted RF Output Power 2.1.1 Requirement According to FCC section 2.1046(a), for transmitters other than sin…

Text truncated - open the document above for the full version.

Test Setup Photos 1. CSE 2. RSE