RAD464UMTS triband/GSM quadband mobile phone

1 English-CJB18N4ALAAA Quick Start Guide Thank you for buying ALCATEL ONETOUCH 6016E. We hope you will enjoy your high-quality mobile communication experience. Important: Your phone is a unibody device, so the back cover and battery are not removable. If your phone meets any unexpected system crash, try to power off it by pressing and holding the Power key and Volume up key at the same time for a while until power-on animation appears. For more information about how to use the cellphone, please go to www.alcatelonetouch.com to download the complete user manual. From the website you can also consult the FAQ, upgrade software, etc. 23 Table of contents 1 Your mobile ���������������������������������������������������������������������3 2 Text input ����������������������������������������������������������������������14 3 Phone call ����������������������������������������������������������������������15 4 People ����������������������������������������������������������������������������17 5 Messaging����������������������������������������������������������������������� 18 6 Email ������������������������������������������������������������������������������ 19 7 Getting connected ��������������������������������������������������������20 8 Find my location using GPS satellites���������������������������22 9 Data backup��������������������������������������������������������������������23 10 Factory data reset��������������������������������������������������������� 23 11 Applications & Internal storage����������������������������������24 12 Making the most of your phone�����������������������������������25 Safety and use.�������������������������������������������������������������������������27 Troubleshooting����������������������������������������������������������������������37 1 Your mobile ������������������ 1�1 Keys and connectors Headset connector Back key Front camera Home key Menu key Micro-USB connector Touch screen PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found on RADIO WAVES of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. 45 Menu key • Touch to access Wallpaper, Manage applications or Settings. • Touch and hold: Touch and hold to open a list of thumbnail images of applications you've worked with recently. Home key • While on any application or screen, touch to return to the Home screen. Back key • Touch to go back to the previous screen, or to close a dialog box, options menu, the notification panel, etc. Power key • Press: Lock the screen/Light up the screen • Press and hold: Power on or generate a pop up menu providing more options, such as Power off, Restart, Airplane mode, etc. • Press and hold Power key and Volume down key to capture a screenshot. • Press to light up the screen when it dims during a call. • Mute the ringtone of an incoming call. Volume keys • Under call mode, adjust the earpiece or headset volume. • In Music/Video/Streaming mode, adjust the media volume. • Press to mute the ringtone when there’s an incoming call. Power key Micro-SIM card slot Camera Volume up Volume down Speaker 67 1�2 Getting started 1�2�1 Set-up Inserting or removing the Micro-SIM card You must insert your Micro-SIM card to make phone calls. Before inserting/removing the Micro-SIM card, you should ensure the phone is off, to protect it from corruption or damage. To install, press the small hole on Micro-SIM card protector by SIM card tool, and then pull out the SIM card slot. Put the Micro-SIM card into the slot with chip facing downward, and then pull in the slot. To remove the card, open Micro-SIM card protector by using SIM card tool, fetch out SIM card, and then pull in the slot. Your phone only supports Micro-SIM card. Do not attempt to insert other SIM types such as mini and nano cards, otherwise you may damage your phone. On dual SIM model, both SIM 1 and SIM 2 support 2G & 3G separately, but only one SIM card can connect to 3G networks at the same time. Charging the battery Connect the battery charger to your phone and outlet respectively. If the battery is very low, there will be no indication that power is being received until the charge is sufficient to show the charging status bar. To reduce power consumption and energy waste, once the battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. 1�2�2 Power on your phone Hold down the Power key until the phone powers on. It will take a few seconds before the screen lights up. Set up your phone for the first time The first time you power on the phone, you should set the following options: language, date & time, Google account, etc. 1�2�3 Power off your phone Hold down the Power key from the Home screen until the Phone options appear, select Power off. 89 1�3 Home screen You can bring all the items (applications, shortcuts, folders and widgets) you love or use most frequently to your Home screen for quick access. Slide the Home screen horizontally left and right to get a complete view of the home screen. Touch the Home key to switch to Home screen. Status bar • Status/Notification indicators Favorite application tray • Touch to enter the application. • Touch and hold to move or change applications. 1�3�1 Using the touchscreen Touch To access an application, touch it with your finger. Touch and Hold Touch and hold the home screen to access Select wallpaper from.…

Text truncated - open the document above for the full version.

5F, E building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 Date 2014-01-22 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: TMC (Telecommunication Metrology Center of MIIT) is authorized to act on our behalf, until otherwise notified, for applications to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Gong Zhizhou Approval Team Leader TCT Mobile Limited

5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 2014-02-14 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: RAD464 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou Gong Approval Team Leader TCT Mobile Limited

EUT photograph Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Battery AE1 Battery AE1 Battery AE2 Battery AE2 Label of Charger AE3 Charger AE3 Label of Charger AE4 Charger AE4 Headset AE5 Headset AE6 Headset AE7 Headset AE8 Data Cable AE9 Data Cable AE10 Data Cable AE11 Data Cable AE12

EUT Interior photograph Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly

No.I14Z45140-SEM01 Page 1 of 128 ©Copyright. All rights reserved by TMC Beijing. SAR TEST REPORT No. I14Z45140-SEM01 For TCT Mobile Limited UMTS triband/GSM quadband mobile phone Mode Name: Miata 3G Marketing Name: 6016E With Hardware Version: Proto Software Version: v1AC2_US+Z3 FCC ID: RAD464 Issued Date: 2014-04-14 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: TMC Beijing, Telecommunication Metrology Center of MIIT No. 52, Huayuan Bei Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2079, Fax:+86(0)10-62304633 Email:[email protected]. www.emcite.com No. I14Z45140-SEM01 Page 2 of 128 Revision Version Report Number Revision Date Memo I14Z45140-SEM01 0 2014-04-14 Initial creation of test report No. I14Z45140-SEM01 Page 3 of 128 TABLE OF CONTENT 1 TEST LABORATORY ................................................................................................................. 5 1.1 TESTING LOCATION ........................................................................................................................................ 5 1.2 TESTING ENVIRONMENT ................................................................................................................................. 5 1.3 PROJECT DATA ............................................................................................................................................... 5 1.4 SIGNATURE ..................................................................................................................................................... 5 2 STATEMENT OF COMPLIANCE ................................................................................................ 6 3 CLIENT INFORMATION.............................................................................................................. 8 3.1 APPLICANT INFORMATION .............................................................................................................................. 8 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 8 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................ 9 4.1 ABOUT EUT ................................................................................................................................................... 9 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 9 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ........................................................................... 10 5 TEST METHODOLOGY ............................................................................................................ 10 5.1 APPLICABLE LIMIT REGULATIONS ................................................................................................................ 10 5.2 APPLICABLE MEASUREMENT STANDARDS .................................................................................................... 10 6 SPECIFIC ABSORPTION RATE (SAR) .................................................................................... 11 6.1 INTRODUCTION ............................................................................................................................................. 11 6.2 SAR DEFINITION .......................................................................................................................................... 11 7 TISSUE SIMULATING LIQUIDS ............................................................................................... 12 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 12 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 12 8 SYSTEM VERIFICATION .......................................................................................................... 16 8.1 SYSTEM SETUP ............................................................................................................................................. 16 8.2 SYSTEM VERIFICATION ................................................................................................................................. 17 9 MEASUREMENT PROCEDURES ............................................................................................ 18 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 18 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 19 9.3 WCDMA MEASUREMENT PROCEDURES FOR SAR ...................................................................................... 20 9.4 BLUETOOTH & WI-FI MEASUREMENT PROCEDURES FOR SAR .................................................................... 21 9.5 POWER DRIFT ............................................................................................................................................... 21 10 AREA SCAN BASED 1-G SAR .............................................................................................. 22 10.1 REQUIREMENT OF KDB .............................................................................................................................. 22 10.2 FAST SAR ALGORITHMS ............................................................................................................................ 22 11 CONDUCTED OUTPUT POWER ............................................................................................ 23 No. I14Z45140-SEM01 Page 4 of 128 11.1 MANUFACTURING TOLERAN…

Text truncated - open the document above for the full version.

No. I14Z45140-SEM01 Page 33 of 128 Table 14.6: SAR Values (GSM 1900 MHz Band - Head) – CAB1700001C1 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Frequency Side Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 1909.8 810 Left Touch / 29.50 30.5 0.086 0.11 0.135 0.17 0.04 1880 661 Left Touch / 29.24 30.5 0.065 0.09 0.108 0.14 0.13 1850.2 512 Left Touch / 29.21 30.5 0.058 0.08 0.095 0.13 0.06 1909.8 810 Left Tilt / 29.50 30.5 0.043 0.05 0.080 0.10 0.19 1880 661 Left Tilt / 29.24 30.5 0.033 0.04 0.062 0.08 0.10 1850.2 512 Left Tilt / 29.21 30.5 0.035 0.05 0.064 0.09 0.16 1909.8 810 Right Touch Fig.3 29.50 30.5 0.112 0.14 0.184 0.23 0.17 1880 661 Right Touch / 29.24 30.5 0.084 0.11 0.145 0.19 0.15 1850.2 512 Right Touch / 29.21 30.5 0.073 0.10 0.124 0.17 0.17 1909.8 810 Right Tilt / 29.50 30.5 0.046 0.06 0.091 0.11 -0.11 1880 661 Right Tilt / 29.24 30.5 0.035 0.05 0.068 0.09 -0.12 1850.2 512 Right Tilt / 29.21 30.5 0.030 0.04 0.065 0.09 0.13 Table 14.7: SAR Values (GSM 1900 MHz Band - Body) – CAB1700001C1 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Frequency Mode (number of timeslots) Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 1880 661 GPRS (2 ) Front / 27.00 28 0.291 0.37 0.485 0.61 -0.01 1909.8 810 GPRS (2 ) Rear Fig.4 27.24 28 0.413 0.49 0.670 0.80 0.02 1880 661 GPRS (2 ) Rear / 27.00 28 0.393 0.49 0.639 0.80 -0.05 1850.2 512 GPRS (2 ) Rear / 26.94 28 0.387 0.49 0.623 0.80 0.05 1880 661 GPRS (2 ) Left / 27.00 28 0.074 0.09 0.132 0.17 -0.10 1880 661 GPRS (2 ) Bottom / 27.00 28 0.223 0.28 0.401 0.50 -0.13 1909.8 810 EGPRS (2 ) Rear / 27.24 28 0.413 0.49 0.662 0.79 0.01 1909.8 810 Speech Rear Headset1 / 29.50 30.5 0.347 0.44 0.573 0.72 -0.01 1909.8 810 Speech Rear Headset2 / 29.50 30.5 0.345 0.43 0.578 0.73 -0.01 Note1: The distance between the EUT and the phantom bottom is 10mm. Note2: The Headset1 is CCB3160A15C1, the Headset2 is CCB3160A15C4. No. I14Z45140-SEM01 Page 34 of 128 Table 14.8: SAR Values (WCDMA 850 MHz Band - Head) – CAB1700001C1 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Frequency Side Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 846.6 4233 Left Touch Fig.5 23.16 24 0.339 0.41 0.459 0.56 0.07 836.4 4182 Left Touch / 23.15 24 0.210 0.26 0.308 0.37 0.10 826.4 4132 Left Touch / 22.95 24 0.189 0.24 0.276 0.35 0.05 846.6 4233 Left Tilt / 23.16 24 0.196 0.24 0.283 0.34 -0.03 836.4 4182 Left Tilt / 23.15 24 0.163 0.20 0.235 0.29 -0.00 826.4 4132 Left Tilt / 22.95 24 0.140 0.18 0.201 0.26 0.09 846.6 4233 Right Touch / 23.16 24 0.269 0.33 0.358 0.43 0.14 836.4 4182 Right Touch / 23.15 24 0.184 0.22 0.269 0.33 0.06 826.4 4132 Right Touch / 22.95 24 0.162 0.21 0.237 0.30 0.12 846.6 4233 Right Tilt / 23.16 24 0.176 0.21 0.254 0.31 0.01 836.4 4182 Right Tilt / 23.15 24 0.152 0.18 0.219 0.27 0.03 826.4 4132 Right Tilt / 22.95 24 0.136 0.17 0.196 0.25 0.06 Table 14.9: SAR Values (WCDMA 850 MHz Band - Body) – CAB1700001C1 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Frequency Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 836.4 4182 Front / 23.15 24 0.354 0.43 0.504 0.61 -0.08 846.6 4233 Rear Fig.6 23.16 24 0.482 0.58 0.622 0.75 -0.07 836.4 4182 Rear / 23.15 24 0.422 0.51 0.603 0.73 0.06 826.4 4132 Rear / 22.95 24 0.327 0.42 0.465 0.59 -0.02 836.4 4182 Left / 23.15 24 0.401 0.49 0.572 0.70 -0.13 836.4 4182 Bottom / 23.15 24 0.154 0.19 0.260 0.32 0.04 846.6 4233 Rear Headset1 / 23.16 24 0.298 0.36 0.425 0.52 -0.05 846.6 4233 Rear Headset2 / 23.16 24 0.265 0.32 0.377 0.46 -0.09 Note1: The distance between the EUT and the phantom bottom is 10mm. Note2: The Headset1 is CCB3160A15C1, the Headset2 is CCB3160A15C4. No. I14Z45140-SEM01 Page 35 of 128 Table 14.10: SAR Values (WCDMA 1900 MHz Band - Head) – CAB1700001C1 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Frequency Side Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 1907.6 9538 Left Touch / 22.85 23.3 0.174 0.19 0.271 0.30 -0.17 1880 9400 Left Touch / 23.05 23.3 0.141 0.15 0.233 0.25 0.10 1852.4 9262 Left Touch / 22.94 23.3 0.115 0.12 0.190 0.21 0.19 1907.6 9538 Left Tilt / 22.85 23.3 0.117 0.13 0.220 0.24 -0.00 1880 9400 Left Tilt / 23.05 23.3 0.109 0.12 0.204 0.22 0.07 1852.4 9262 Left Tilt / 22.94 23.3 0.088 0.10 0.165 0.18 -0.04 1907.6 9538 Right Touch / 22.85 23.3 0.207 0.23 0.357 0.40 0.11 1880 9400 Right Touch Fig.7 23.05 23.3 0.273 0.29 0.447 0.47 0.13 1852.4 9262 Right Touch / 22.94 23.3 0.195 0.21 0.336 0.37 0.12 1907.6 9538 Right Tilt / 22.85 23.3 0.095 0.11 0.179 0.20 0.05 1880 9400 Right Tilt / 23.05 23.3 0.094 0.10 0.177 0.19 -0.06 1852.4 9262 Right Tilt / 22.94 23.3 0.081 0.09 0.150 0.16 0.05 Table 14.11: SAR Values (WCDMA 1900 MHz Band - Body) – CAB1700001C1 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Frequency Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 1880 9400 Front / 23.05 23.3 0.460 0.49 0.779 0.83 -0.02 1907.6 9538 Rear Fig.8 22.85 23.3 0.618 0.69 1 1.11 0.05 1880 9400 Rear / 23.05 23.3 0.610 0.65 0.990 1.05 0.04 1852.4 9262 Rear / 22.94 23.3 0.540 0.59 0.870 0.95 0.06 1880 9400 Left / 23.05 23.3 0.148 0.16 0.280 0.30 -0.12 1880 9400 Bottom / 23.…

Text truncated - open the document above for the full version.

No. I14Z45140-SEM01 Page 97 of 128 No. I14Z45140-SEM01 Page 98 of 128 No. I14Z45140-SEM01 Page 99 of 128 No. I14Z45140-SEM01 Page 100 of 128 No. I14Z45140-SEM01 Page 101 of 128 No. I14Z45140-SEM01 Page 102 of 128 1900 MHz Dipole Calibration Certificate No. I14Z45140-SEM01 Page 103 of 128 No. I14Z45140-SEM01 Page 104 of 128 No. I14Z45140-SEM01 Page 105 of 128 No. I14Z45140-SEM01 Page 106 of 128 No. I14Z45140-SEM01 Page 107 of 128 No. I14Z45140-SEM01 Page 108 of 128 No. I14Z45140-SEM01 Page 109 of 128 No. I14Z45140-SEM01 Page 110 of 128 2450 MHz Dipole Calibration Certificate No. I14Z45140-SEM01 Page 111 of 128 No. I14Z45140-SEM01 Page 112 of 128 No. I14Z45140-SEM01 Page 113 of 128 No. I14Z45140-SEM01 Page 114 of 128 No. I14Z45140-SEM01 Page 115 of 128 No. I14Z45140-SEM01 Page 116 of 128 No. I14Z45140-SEM01 Page 117 of 128 No. I14Z45140-SEM01 Page 118 of 128 ANNEX I SPOT CHECK TEST As the test lab for 6016E from TCT Mobile Limited, we, TMC Beijing, declare on our sole responsibility that, according to “Declaration of changes” provided by applicant, only the Spot check test should be performed. The test results are as below. I.1 Internal Identification of EUT used during the spot check test EUT ID* IMEI HW Version SW Version EUT1 863829020000715 Proto v1AC2_US+Z3 *EUT ID: is used to identify the test sample in the lab internally. I.2 Conducted power of selected case Table I.1: The conducted power results for GSM850/1900 GSM 850MHz Conducted Power (dBm) Channel 251(848.8MHz) Channel 190(836.6MHz) Channel 128(824.2MHz) \ \ 32.27 GSM 1900MHz Conducted Power (dBm) Channel 810(1909.8MHz) Channel 661(1880MHz) Channel 512(1850.2MHz) 29.20 \ \ Table I.2: The conducted power results for GPRS GSM 850 GPRS (GMSK) Measured Power (dBm) 251 190 128 2 Txslots 30.27 \ \ PCS1900 GPRS (GMSK) Measured Power (dBm) 810 661 512 2 Txslots 26.93 \ \ Table I.3: The conducted power results for WCDMA Item band FDD V result ARFCN 4233 (846.6MHz) 4182 (836.4MHz) 4132 (826.4MHz) WCDMA \ 23.04 \ \ Item band FDD II result ARFCN 9538 (1907.6MHz) 9400 (1880MHz) 9262 (1852.4MHz) WCDMA \ 22.53 22.25 \ No. I14Z45140-SEM01 Page 119 of 128 I.3 Measurement results SAR Values (GSM 850 MHz Band - Head) Frequency Side Test Position Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 824.2 128 Left Touch CAB1700001C1 0.338 0.295 SAR Values (GSM 850 MHz Band - Body) Frequency Mode/Band Test Position Spacing (mm) Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 848.8 251 GPRS Rear 10 CAB1700001C1 0.668 0.513 SAR Values (PCS 1900 MHz Band - Head) Frequency Side Test Position Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 1909.8 810 Right Touch CAB1700001C1 0.184 0.098 SAR Values (PCS 1900 MHz Band - Body) Frequency Mode/Band Test Position Spacing (mm) Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 1909.8 810 GPRS Rear 10 CAB1700001C1 0.670 0.614 SAR Values (WCDMA 850 MHz Band - Head) Frequency Side Test Position Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 846.6 4233 Left Touch CAB1700001C1 0.459 0.293 SAR Values (WCDMA 850 MHz Band - Body) Frequency Test Position Spacing (mm) Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 846.6 4233 Rear 10 CAB1700001C1 0.622 0.421 SAR Values (WCDMA 1900 MHz Band - Head) Frequency Side Test Position Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 1880 9400 Right Touch CAB1700001C1 0.447 0.293 SAR Values (WCDMA 1900 MHz Band - Body) Frequency Test Position Spacing (mm) Battery Type SAR(1g) (W/kg) MHz Ch. Original data Spot check data 1907.6 9538 Rear 10 CAB1700001C1 1 0.710 No. I14Z45140-SEM01 Page 120 of 128 I.4 Reported SAR Comparison Exposure Configuration Technology Band Reported SAR 1g (W/Kg): original Reported SAR 1g (W/Kg): spot check Head (Separation Distance 0mm) GSM 850 0.38 0.38 PCS 1900 0.23 0.13 UMTS FDD 2 0.47 0.37 UMTS FDD 5 0.56 0.37 Body-worn (Separation Distance 10mm) GSM 850 0.80 0.68 PCS 1900 0.80 0.79 UMTS FDD 2 1.11 0.85 UMTS FDD 5 0.75 0.53 No. I14Z45140-SEM01 Page 121 of 128 I.5 Graphic results 850 Left Cheek Low Date: 2014-2- 15 Electronics: DAE4 Sn771 Medium: Head 850 MHz Medium parameters used: f = 825 MHz; σ = 0.878 S/m; εr = 40.3; ρ = 1000 kg/m 3 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Communication System: GSM 850 Frequency: 824.2 MHz Duty Cycle: 1:8.3 Probe: EX3DV4 - SN3846 ConvF(8.92, 8.92, 8.92) Cheek Low/Area Scan (61x111x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.302 W/kg Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.860 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.372 W/kg SAR(1 g) = 0.295 W/kg; SAR(10 g) = 0.216 W/kg Maximum value of SAR (measured) = 0.309 W/kg Fig.I.1 850MHz CH128 No. I14Z45140-SEM01 Page 122 of 128 850 Body Rear High Date: 2014-2- 15 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used (interpolated): f = 848.8 MHz; σ = 0.971 S/m; εr = 54.159; ρ = 1000 kg/m 3 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Communication System: GSM 850 EGPRS Frequency: 848.8 MHz Duty Cycle: 1:4 Probe: EX3DV4 - SN3846 ConvF(8.73, 8.73, 8.73) Rear High/Area Scan (61x111x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.547 W/kg Rear High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.974 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.626 W/kg SAR(1 g) = 0.513 W/kg; SAR(10 g) = 0.398 W/kg Maximum value of SAR (measured) = 0.546 W/kg Fig.I.2 850 MHz CH251 No. I14Z45140-SEM01 Page 123 of 128 GSM1900 Right Cheek High Date: 2014-2- 16 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used: f = 1910 MHz; σ = 1.439 S/m; εr = 39.424; ρ = 1000 kg/m 3 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Communication System: GSM 1900MHz Frequency: 1909.8 MHz Duty Cycle: 1:8.3 Probe: EX3DV4 - SN384…

Text truncated - open the document above for the full version.

No. I14Z45140-SEM01 Page 65 of 128 ANNEX B System Verification Results 835MHz Date: 2014-2- 15 Electronics: DAE4 Sn771 Medium: Head 850 MHz Medium parameters used: f = 835 MHz; σ = 0.886 S/m; ε r = 40.17; ρ = 1000 kg/m 3 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(8.92, 8.92, 8.92) System Validation/Area Scan (81x161x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 54.327 V/m; Power Drift = -0.08 dB Fast SAR: SAR(1 g) = 2.42 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (interpolated) = 2.65 W/kg System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.327 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 3.61 W/kg SAR(1 g) = 2.39 W/kg; SAR(10 g) = 1.56 W/kg Maximum value of SAR (measured) = 2.63 W/kg 0 dB = 2.65 W/kg = 8.46 dBW/kg Fig.B.1 validation 835MHz 250mW No. I14Z45140-SEM01 Page 66 of 128 835MHz Date: 2014-2- 15 Electronics: DAE4 Sn771 Medium: Body 850 MHz Medium parameters used: f = 835 MHz; σ = 0.958 S/m; ε r = 54.33; ρ = 1000 kg/m 3 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(8.73, 8.73, 8.73) System Validation /Area Scan (81x171x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 51.968 V/m; Power Drift = 0.10 dB Fast SAR: SAR(1 g) = 2.37 W/kg; SAR(10 g) = 1.57 W/kg Maximum value of SAR (interpolated) = 2.62 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 51.968 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 3.44 W/kg SAR(1 g) = 2.40 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (measured) = 2.64 W/kg 0 dB = 2.62 W/kg = 8.37 dBW/kg Fig.B.2 validation 835MHz 250mW No. I14Z45140-SEM01 Page 67 of 128 1900MHz Date: 2014-2- 16 Electronics: DAE4 Sn771 Medium: Head 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.43 S/m; ε r = 39.48; ρ = 1000 kg/m 3 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Communication System: CW Frequency: 1900 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.57, 7.57, 7.57) System Validation/Area Scan (81x121x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 98.105 V/m; Power Drift = 0.08 dB Fast SAR: SAR(1 g) = 9.91 W/kg; SAR(10 g) = 5.18 W/kg Maximum value of SAR (interpolated) = 11.7 W/kg System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 98.105 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 18.13 W/kg SAR(1 g) = 10.1 W/kg; SAR(10 g) = 5.36 W/kg Maximum value of SAR (measured) = 11.9 W/kg 0 dB = 11.7 W/kg = 21.36 dB W/kg Fig.B.3 validation 1900MHz 250mW No. I14Z45140-SEM01 Page 68 of 128 1900MHz Date: 2014-2- 16 Electronics: DAE4 Sn771 Medium: Body 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.545 S/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature: 22.1 o C Liquid Temperature: 21.6 o C Communication System: CW Frequency: 1900 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.03, 7.03, 7.03) System Validation/Area Scan (81x121x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 79.682 V/m; Power Drift = -0.07 dB Fast SAR: SAR(1 g) = 10.0 W/kg; SAR(10 g) = 5.22 W/kg Maximum value of SAR (interpolated) = 11.6 W/kg System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 79.682 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 16.64 W/kg SAR(1 g) = 10.2 W/kg; SAR(10 g) = 5.39 W/kg Maximum value of SAR (measured) = 11.8 W/kg 0 dB …

Text truncated - open the document above for the full version.