RE7-AP332EDual radio Access point

Meru AP300 Installation Guide Copyright © Meru Networks, Inc., 2003–2012. All rights reserved. Other names and brands may be claimed as the property of others. June 2012 Document Number: 882-70013 Rev A Ver 9 AP300 Installation Guide iii MERU NETWORKS, INC. Limited Product Warranty This Limited Product Warranty applies to the original end-user customer of the Meru product which you purchased for your own use, and not for resale (“Product”), from Meru Networks, Inc. (“Meru”) or its authorized reseller (“Reseller”). Limited Warranties —One-year limited hardware warranty: Meru warrants to you that Meru hardware (other than Third Party Products as described below) will be free from defects in materials and workmanship for a one-year period after the date of delivery of the applicable product to you from Meru or its Reseller (the “Hardware Warranty Period”). If Meru receives written notice from you of such defects during the Hardware Warranty Period, Meru will, at its option, either repair or replace Meru hardware that Meru determines to be defective. Replacement products may be remanufactured units, and will be warranted for the remainder of the original Hardware Warranty Period, or if greater, for thirty days from delivery of such replacement. Should Meru be unable to repair or replace the Meru hardware, Meru (or its Reseller, as applicable) will refund to you the purchase price of the Product. —90-Day Limited Software Warranty: Meru warrants to you that, for a 90- day period after the date of delivery of the applicable product to you from Meru or its Reseller (the “Software Warranty Period”), when properly installed and used, (a) the media on which the Meru software is provided will be free from defects in materials or workmanship; and (b) the Meru software will substantially conform to the functional specifications in the applicable documentation. If Meru receives written notice from you of a breach of this warranty during the Software Warranty Period and is able to reproduce the defect, Meru will, at its option, either repair or replace the defective Meru software. Should Meru be unable to repair or replace the Meru software, Meru (or its Reseller, as applicable) will refund to you the purchase price of the Product. Exclusions The warranty on the Product shall not apply to defects resulting from the following: ivMeru Access Point Installation Guide — Alteration or modification of the Product in any way, including without limitation configuration with software or components other than those supplied by Meru or integration with parts other than those supplied by Meru. —Abuse, damage or otherwise being subjected to problems caused by negligence or misapplication (including without limitation improper or inadequate maintenance or calibration), relocation of the products (including without limitation damage caused by use of other than Meru shipping containers), or use of the products other than as specified in the applicable Meru product documentation (including without limitation incompatible operating environments and systems), or improper site preparation or maintenance. —Damage as a result of accidents, extreme power surge, extreme electromagnetic field, acts of nature or other causes beyond the control of Meru. —Use of the Product with software, interfacing, parts or supplies not supplied by Meru. The warranty on the Product does not apply if the Product is sold, or in the case of software, licensed, for free for evaluation or demonstration purposes. Meru expressly disclaims any warranty or obligation to support the Product for all operating environments – for example, as illustration and not limitation, Meru does not warrant or ensure interoperability of the Product with future telecommunica- tion systems or other future software or hardware. You understand and acknowledge that the Products may generate, use or radiate radio frequency energy and may interfere with radio communications and/or radio and television receptions if is not used and/or installed in accordance with the documentation for such products. WHILE MERU USES COMMERCIALLY REASONABLE EFFORTS TO ENSURE COMPLIANCE OF THE PRODUCTS WITH APPLICABLE UNITED STATES FEDERAL COMMUNICATIONS COMMISSION AND PROTECT AGAINST HARMFUL INTERFERENCES, YOU ACKNOWLEDGE AND AGREE THAT INTERFERENCES WITH RADIO COMMUNICATIONS AND/OR RADIO AND TELEVISION RECEPTIONS MAY OCCUR AND THAT MERU WILL NOT BE LIABLE FOR ANY DAMAGES OR INCONVENIENCE BASED ON SUCH INTERFERENCES. Third Party Products - The above Limited Warranties are exclusive of products manufactured by third parties (“Third Party Products”). If such third party manu- facturer provides a separate warranty with respect to the Third Party Product, Meru will include such warranty in the packaging of the Meru Product. Return procedures To obtain warranty service you must: (a) obtain a return materials authorization number (“RMA#”) from Meru by contacting [email protected], and (b) deliver the Product, in accordance with the instructions provided by Meru, along with proof of purchase in the form of a copy of the bill of sale including the Product’s serial number, contact information, RMA# and detailed description of the defect, in either its original package or packaging providing the Product with a v degree of protection equivalent to that of the original packaging, to Meru at the address below. You agree to obtain adequate insurance to cover loss or damage to the Product during shipment. If you obtain an RMA# and return the defective Product as described above, Meru will pay the cost of returning the Product to Meru. Otherwise, you agree to bear such cost, and prior to receipt by Meru, you assume risk of any loss or damage to the Product. Meru is responsible for the cost of return shipment to you if the Meru Product is defective. Returned products which are found by Meru to be not defective, returned out-of- warranty or otherwise ineligible for warranty service will be repaired or rep…

Text truncated - open the document above for the full version.

1 DO NOT SCALE THIS DRAWING ±.010 ±.05 ±1.5° 3 PLCS 2 PLCS ANG UNLESS OTHERWISE NOTED DIMENSIONS ARE IN INCHES C2/A1R DWG SIZE REV/REL SHEET USE PURSUANT TO COMPANY INSTRUCTIONS THIRD ANGLE PROJECTION P TITLE DESCRIPTION DATE REV DRAWING NUMBER PROE FILE NAME HS 05/17/12 MERU NETWORKS PROPRIETARY 845-00605 3 1 10/24/11 Initial Release 2 02/24/12 Change CE number to 1313 Label, Regulatory, AP332e SCALE 1:1 102 mm x 15.5 mm IC: 6749A-AP332E FCC ID: RE7-AP332E MADE IN CHINA NOTES: UNLESS OTHERWISE SPECIFIED) 1. MUST CONFORM TO UL969 MARKING & LABELING SYSTEM PGDQ2; VAL-THERM-D OR EQUIVALENT. 2. ALL TEXT AND GRAPHICS ARE BLACK.3. CE, GITEKI & KOREAN MARK HAVE MINIMUM HEIGHT OF 5mm.4. The diameter of the C-Tick mark has a minimum requirement of 3mm and the suppliers identification characters have a minimum height requirement of 1mm5. For UAE mark, “TRA” min height 3mm, all other characters min height 2mm6. For So. Africa mark, the ICASA logo min requirement is 3 x 3 mm7. Factory Code: Shanghai = “S”, Shenzhen = “SZ” E239453 SZ I.T.E. ACCESSORY 0980 Meru Networks Dual Radio Access PointModel No. AP332E Power Over Ethernet:-48 V /750 mA 3 05/17/12 Change CE ID, Update FCC & IC IDs, remove Japan IDs FILES: WHOLE WITHOUT THE WRITTEN PERMISSION ASSY, Bottom Cover, AP332i 840-00107 840-00107-r01_(ASSY, Bottom Cover, AP332i) D C B A A B C D 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 GEOMETRIC TOLERANCING PER ANSI Y14.5-1994 E SCALE: F WHIPSAW 840-00097 1 NONE REV DWG. NO. D SIZE TITLE: NAME DATE Q.A.MFG APPR. ENG APPR. E ASSY, Bottom Cover, AP332e DO NOT SCALE DRAWING SHEET 1 OF 1 894 Ross Drive, Sunnyvale, CA 94089, USA CHECKED DRAWN ALL PROJECTION ARE THIRD ANGLE PROPRIETARY AND CONFIDENTIAL OF MERU NETWORKS IS PROHIBITED. 12/15/2011 F THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMERU NETWORKS.ANY REPRODUCTION IN PART OR AS A CAD 840-00097-r01_(ASSY, Bottom Cover, AP332e) TOLERANCES ARE: REV. DESCRIPTION 1 1 DESCRIPTION REVISIONS NONE 650-00230 ENCL, Bottom Cover, AP332 DATE ITEM NO. PART NUMBER 840-00107-r01_(ASSY, Bottom Cover, AP332i) 840-00097-r01_(ASSY, Bottom Cover, AP332e) DIMENSIONS ARE IN MILLIMETERS [INCHES]UNLESS OTHERWISE SPECIFIED QTY. 12/15/2011 PRODUCTION RELEASE SEE NOTES 1 2 845-00593 Label, Regulatory1, AP332e 1 3 845-00594 Label, System, PN SN, AP332 1 4 845-00639 Label, Regulatory2, AP332e 1 5 845-00644 Label, IO, AP332 1 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 650-00230 ENCL, Bottom Cover, AP332 1 2 845-00605 Label, Regulatory1, AP332i 1 3 845-00594 Label, System, PN SN, AP332 1 4 845-00606 Label, Regulatory2, AP332i 1 5 845-00644 Label, IO, AP332 1 1 2 3 4 5 3 4 2 5 1 NOTES: (UNLESS OTHERWISE SPECIFIED) 1. PARTS SHALL BE CLEAN AND FREE OF ALL FOREIGN MATERIAL. 2. SHIPPING BOX AND/OR CONTAINER TO BE CLEARLY MARKED OR LABELED WITH PART #, REV #, PRO DUCTION DATE, AND QUANTITY OF PARTS ENCLOSED. Free 59-531169-01 2B-037129 1/1 A1 ED/SHED/MDE FCC LBL,30*15.5MM,MERU,AP332 4.5 6.3 Yinling Mark ± 0.5 UL File Number(PGAA-LP3253); UL Category Code: PGDQ2, HY-06 6.UL Certifications: Company Name(DA CHANG),UL File Number(MH45513); UL Marking:DA CHANG,MH45513 PGDQ2,HY-06 05/21/12 NOTES: UNLESS OTHERWISE SPECIFIED) 1. MUST CONFORM TO UL969 MARKING & LABELING SYSTEM PGDQ2; VAL-THERM-D OR EQUIVALENT. 2. ALL TEXT AND GRAPHICS ARE BLACK. 3. CE, GITEKI & KOREAN MARK HAVE MINIMUM HEIGHT OF 5mm. 4. C-Tick logo has a minimum height requirement of 2mm and text 1mm 材质：50番消银龙（银色） 5. USE ELECTRONIC FILE # 845-00606.AI 05/21/12 SCALE 1:1 30 mm x 15.5 mm This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations. Cet apparell numérique de la classe B réspecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Photograph 1. Board Back with Can removed Photograph 2. Board Back Zoom in Can Photograph 3. Board Back Photograph 4. Board Top Photograph 5. Cans Removed Photograph 6. Cover Off 2 Photograph 7. Cover Off Photograph 8. RF Cards Back Photograph 9. RF Cards Front

TerraWave Solutions ® 802.11n 2.4/5 GHz 3/4 dBi Dual-band 3-Pack Mini MIMO Omnidirectional Antenna with Plenum Pigtails and RPSMA Plug Connectors TerraWave’s new 2.4/5 GHz multiple-input and multiple-output (MIMO) omnidirectional antenna is designed to be operated with any manufacturer’s enterprise-class 802.11n MIMO access points (APs). The antenna features three integrated 2.4 and 5 GHz dual-band omni antennas in one enclosure, making it an ideal and aesthetically pleasing antenna to support demanding applications in next generation IEEE 802.11n wireless communication systems. All TerraWave antennas are covered by the Company’s two-year TerraNet warranty program. For questions and to purchase product, contact a wireless networking solutions sales engineer at 210-375-8482, 800-851-4965 or [email protected]. Visit www.terrawave.com for additional information. www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216 Specifications Model M6030040O1D1820MP Frequency Range 2400 ~ 2483 / 5150 ~ 5850 MHz Bandwidth 83 / 700 MHz Gain 3 / 4 dBi Vertical Beamwidth 90°/160° Horizontal Beamwidth 360° VSWR ≤ 2.0 Nominal Impedance 50 Ohms Polarization Vertical Max Power 2 Watts Connector RPSMA Plug Dimensions 5.9” x 2.9” x 1.0” Weight 1.55 lbs Operating Temperature Range -40°F to +158°F Lightning Protection DC Ground Pigtail Length 18” Plenum 2.4 GHz 5 GHz E-Plane Pattern H-Plane Pattern E-Plane Pattern H-Plane Pattern TerraWave Solutions ® 802.11n 2.4/5 GHz 3/4 dBi Dual-band 3-Pack Mini MIMO Omnidirectional Antenna with Plenum Pigtails and RPSMA Plug Connectors Mounting Information for M6030040O1D1820MP www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216

TerraWave Solutions® 802.11n Dual Band 2.4/5 GHz 6 dBi Outdoor MIMO Omnidirectional Antenna with RPSMA Plug Connectors TerraWave’s 6 dBi outdoor multiple-input and multiple-output (MIMO) omnidirectional antenna is designed to operate enterprise class 802.11n MIMO access points. This antenna features three integrated 2.4 GHz omni antennas and three integrated 5 GHz omni antennas in one fiberglass enclosure, making it an ideal and aesthetically pleasing antenna to support demanding outdoor applications in next generation IEEE 802.11n wireless communication systems. The ruggedized enclosure makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. Includes an L-Bracket for mast mounting and a convenient beam clamp. Every TerraWave antenna is covered by the Company’s two-year TerraNet warranty program. Visit www.terrawave.com for additional information. Specifications Model M6060060MO13620O Frequency Range 2400~2500 / 5150~5850 MHz Bandwidth 100 / 700 MHz Gain 6 dBi Vertical Beamwidth 40° Horizontal Beamwidth 360° VSWR ≤ 1.5 / ≤ 2.0 Nominal Impedance 50 Ohms Polarization Vertical Isolation ≥ 25 dB Electrical Downtilt ≤ 5° Max Power 20 Watts Connector RPSMA Plug with 36” Pigtail Dimensions Ø6.0” x 7.1” Weight 3.74 lbs Mast Mount Diameter Ø1.57” ~ Ø1.97” Operating Temperature Range -22°F ~ +158°F E-Plane Pattern H-Plane Pattern 2.4 GHz E-Plane Pattern H-Plane Pattern 5 GHz www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216 TerraWave Solutions® 802.11n 2.4/5 GHz 6 dBi Outdoor MIMO Omnidirectional Antenna with RPSMA Plug Connectors Mounting Information for M6060060MO13620O Single Beam Clamp Double Beam Clamp Antenna Mounted to Pole www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216

TerraWave Solutions® 802.11n 2.4/5 GHz 6/7 dBi MIMO Patch Antenna with RPSMA Plug Connectors TerraWave’s new dual band 2.4/5 GHz multiple-input and multiple-output (MIMO) patch antenna is designed to operate with many manufacturers’ enterprise-class 802.11n MIMO access points (APs). This antenna features three integrated 2.4 GHz patch antennas and three integrated 5 GHz patch antennas in one enclosure, making it an ideal and aesthetically pleasing antenna to support demanding indoor or outdoor applications in next generation IEEE 802.11n wireless communication systems. Includes TerraWave’s Universal Articulating Mount for an easy and flexible wall/mast mount installation. Every TerraWave antenna is covered by the Company’s two-year TerraNet warranty program. Visit www.terrawave.com for additional information. E-Plane Pattern H-Plane Pattern 2.4 GHz E-Plane Pattern H-Plane Pattern 5 GHz Specifications Model M6060070MP13620 Frequency Range 2400 ~ 2500 / 5100 ~ 5850 MHz Bandwidth 100 / 750 MHz Gain 6 dBi / 7 dBi Vertical Beamwidth 72° / 60° Horizontal Beamwidth 82° / 75° Front-to-back Ratio ≥ 18 dB VSWR ≤ 1.5 / ≤ 2.0 Nominal Impedance 50 Ohms Polarization Vertical Max Power 50 Watts Connector RPSMA Plugs with 36” Pigtails Dimensions 17.5” x 6.1” x 1.0” Weight 1.9 lbs Operating Temperature Range -22°F to +158°F Mounting Style Wall Mount / Mast Mount Mast Diameter 1.5” - 1.96” Wind Load 134 mph www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216 TerraWave Solutions® 802.11n 2.4/5 GHz 6/7 dBi MIMO Patch Antenna with RPSMA Plug Connectors Mounting Options for M6060070MP13620 Flush Wall Mount Example Mast / Wall Mount Example www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216

承 認 書 APPROVAL SHEET CUSTOMER：環隆電氣股份有限公司 DESCRIPTION：2.4G&5.8G 2dBi標準天線 SOCAA P/N：AS123-F DATE：01-29-08” WEIGHT：18.3g/1PCS 經理 Manager 品保 QC 工程師 Engineer CUSTOMER P/N： Customer Approval： 矽原精密電子股份有限公司 統一編號：12616070 SOCAA CORP.,LTD. (Solution Of Connector & Antenna Corp. Ltd.) 台灣台南縣永康市中正三街486巷50號 No.50 Lane 486,Jhongjheng 3 rd st.,Yongkang City, Tainan County, Taiwan. R.O.C TEL：886-6-2427963~4 FAX：886-6-2427857 E-Mail：[email protected] ; [email protected] 網站：http://www.socaa.com.tw 承認書編號： 2 . 4 G & 5 . 8 G 2 d B i 標 準 天 線 F r e q : 2 . 4 〜 2 . 5 G H z & 4 . 9 ~ 5 . 8 2 5 G H z G a i n : 2 d B i S W R < = 2 P a t t e r n : O m n i S O C A A C O R P . , L T D . ( S o l u t i o n O f C o n n e c t o r & A n t e n n a ) S O A C A A S 1 2 3 - F 結 構 特 性 : 1 . 外 套 與 基 座 拆 彎 2 0 次 內 不 可 有 粉 末 現 象 2 . 天 線 外 套 側 向 推 力 需 逹 1 . 5 K G M I N . 3 . 外 套 與 基 座 水 平 拉 力 須 逹 1 4 K G M I N . 矽 原 精 密 電 子 股 份 有 限 公 司 SOCAA-Solution Of Connector & Antenna 製表日期 96年08月27日 版 次 A-0 SMA SPECIFICATIONS 製 表 者 馬正成 Electrical Properties 1.Impedance.......................................50 Ohms 2.Frequency Range..............................0~6 Ghz 3.V.S.W.R..........................................1.5 MAX. 4.Working Voltage..............................≦250 Vrms 5.Dielectric Withstanding Voltage......≦750 Vrms 6.Insulation Resistance.....................≧2000 Megohms 7.Contact Resistance...........................Center contact：3.0 Milliohms Max. Outer contact ：2.5 Milliohms Max. 8.Insertion Loss....................................0.2 dB Environmental Ratings 1.Operating Temperature........................-65°C~+165°C 2.Thermal Shock....................................MIL-STD-202，Method 107，Condition B 3.Corrosion..........................................MIL-STD-202，Method 101，Condition B 4.Shock................................................MIL-STD-202，Method 213，Condition I 5.Vibration..........................................MIL-STD-202，Method 204，Condition D 6.Moisture Resistance...........................MIL-STD-202，Method 106 Material Specifications 1. Body................................................Brass Per JIS C3604，Gold Plated 2. Contact..........................................Brass Per JIS C3604，Gold Plated 3. Insulator.......................................PTFE Per ASTM D 1710 S O C A A C O R P . , L T D . ( S o l u t i o n O f C o n n e c t o r & A n t e n n a ) S O A C A 0 45 90 135 180 225 270 315 -10 -10 -20 -20 -30 -30 -40 +x xy-plane low band 0 45 90 135 180 225 270 315 -10 -10 -20 -20 -30 -30-40 +x +y xy-plane high band 2.4GHz 2.45GHz 2.5GHz 4.9GHz 5.15GHz 5.25GHz 5.75GHz 0 45 90 135 180 225 270 315 -10 -10 -20 -20 -30 -30 -40 -40 xz-plane low band 0 45 90 135 180 225 270 315 -10 -10 -20 -20 -30 -30 -40 -40 xz-plane high band 2.4GHz 2.45GHz 2.5GHz 4.9GHz 5.15GHz 5.25GHz 5.75GHz 矽原精密電子股份有限公司 SOCAA CORP.,LTD. (Soulution Of Connector & Antenna) Sample Approval Sheet Item/Part No：AS123-F Quantity：3 PCS Drawing No： Material： Date：01-24-08” Dimension Inspection Dimension in m/m RD Measure Result（Max~Min） QA Measure Result（Max~Min） A 130.5±2.0 130.5-131.0 130.5-130.5 B ± C ± D ± E ± F ± G ± H ± I ± J ± K ± Surface Inspection Forming OK OK Electroplate OK OK Body OK OK Function Inspection Mating OK OK PCB Board Test N/A N/A Push Test N/A N/A Open/Short Test OK OK Shell Turn Test OK OK Torque Test OK OK Addition Measure Witness Result □ □ □ □ Qualified □ Unqualified Quality Department：MANDY Research Department：CHAD F-QP-FD-013-01A V TESTING FOR SALT WATER MIST TESTING DTAE: 01/27/08” TESTING TIME：４８HOUR COMPANY:SOCAA CORP.,LTD. TEST MATERIAL：BRASS PLATED:AU” COMMODITY:AS123-F CHARACTER： TESTING CONDITION: AIR COMPRESS: FIRST COMPRESSION 2. SLIGHT COMPRESSION 1. SATURATION TEMPRATURE: 47 °C TESTING TEMPERATURE: 35 °C CONSENQUENCE ACCORDING TO C.N.S GRADE， DETERMINIMG 9.8 GRADE AND ITS CORRODED SURFACE IS UNDER 0.02 PERCENT。 MAKER REMARKS CHAD THE MATERIAL CERTIFICATE OF BRASS Customer SOCAA CORP.,LTD. (Solution Of Connector & Antenna) Material Free cutting brass Stability-class: JIS H 3250 C3604 BD CHEMICAL COMPOSITION % Taster X-RAY ANALYSIS Measurement VACUUM X RAY SPECTROGRAPH ELEMENT STANDARD VALUE ACTUAL VALUE REMARK Cu 57.0-61.0% 58.43 % Pb 1.8-3.7 % 3.36 % Fe <0.5 % -------- Sn+Fe <1.2 % 0.71 % Zn REMAINDER REMAINDER Other MECHANICAL & PHYSICAL PROPERTIES Tensile strength : 360 N/mm² Heated*material Hardness or stability, HB or HV : (90) REMARK: ASTM Standard: CA 360 Free cutting brass. THE MATERIAL CERTIFICATES OF TEFLON Customer SOCAA CORP.,LTD. (Solution Of Connector & Antenna) Material TEFLON Physical Properties % Density g/cm³ 2.14-2.2 Physical Properties Water absorption % >0.01 Tensile strength kg/cm² 140-350 Flexural strength kg/cm² 16.4 Rockwell hardness D55 lzod impact strength kg cm/cm with notch 2.5~2.7 Taper wears mg/1000 Times Mechanical Properties Friction coefficients 0.1-0.04 Coefficient of linear thermal expansion × 10 /°C 7.0-10.0 Thermal conductivity kcal/m. Hr.°C 6.0 Heal distortion temperatures °C Heat Properties Heat resistance °C 260-278 Dielectric breakdown strengths KV/mm 43-50 Electrical Properties Coefficient of volume resistance Ω-cm 10³ REMARK: Harbour Industries’ headquarters are located in Shelburne, Vermont with state-of-the-art manufacturing facilities in Vermont and Farnham, Quebec, Canada. Additional sales and stocking locations are in California and Florida in the United States, Europe and Asia including Harbour Korea and Harbour China. Harbour Industries, the leading manufacturer of High Performance Wire and Cable sells to many different commercial, military and industrial markets around the world since 1965. Please see our full catalog offering at www.harbourind.com. 4744 Shelburne Road Shelburne, VT 05482 Ph. 802-985-3311 Fax 802-985-9534 www.harbourind.com LL LOW LOSS COAX  Special Expanded PTFE Tape Dielectrics  Low Attenuation At Higher Operating Frequencies  Special Composite Shields With High Shielding Levels  Phase Stable Over Temp…

Text truncated - open the document above for the full version.

§ 15.247(i) Maximum Permissible Exposure RF Exposure Requirements: §1.1307(b)(1) and §1.1307(b)(2): Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. RF Radiation Exposure Limit: §1.1310: As specified in this section, the Maximum Permissible Exposure (MPE) Limit shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Sec. 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Sec. 2.1093 of this chapter. MPE Limit Calculation: EUT’s operating frequencies @ 2400-2483.5 MHz; highest conducted power = 25.17dBm (peak) therefore, Limit for Uncontrolled exposure: 1 mW/cm 2 or 10 W/m 2 EUT maximum antenna gain = 3 x 6 dBi per element. Total Gain = 10.77dBi Equation from page 18 of OET 65, Edition 97-01 S = PG / 4R 2 or R = √PG / 4S where, S = Power Density (1 mW/cm 2 ) P = Power Input to antenna (328.85mW) G = Antenna Gain (11.94 numeric) S = (328.85*11.94 / 4*3.14*20 2) = (3926.47 / 5024) = 0.782 mW/cm 2 MPE Limit Calculation: EUT’s operating frequencies @ 5725-5850 MHz; highest conducted power = 21.17dBm (peak) therefore, Limit for Uncontrolled exposure: 1 mW/cm 2 or 10 W/m 2 EUT maximum antenna gain = 3 x 7 dBi per element. Total Gain = 11.77dBi Equation from page 18 of OET 65, Edition 97-01 S = PG / 4R 2 or R = √PG / 4S where, S = Power Density (1 mW/cm 2 ) P = Power Input to antenna (130.92mW) G = Antenna Gain (15.03 numeric) S = (130.02*15.03 / 4*3.14*20 2) = (1967.89 / 5024) = 0.392 mW/cm 2

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE ! BALTIMORE, MARYLAND 21230-3432 ! PHONE (410) 354-3300 ! FAX (410) 354-3313 33439 WESTERN AVENUE ! UNION CITY, CALIFORNIA 94587 ! PHONE (510) 489-6300 ! FAX (510) 489-6372 3162 BELICK STREET ! SANTA CLARA, CA 95054 ! PHONE (408) 748-3585 ! FAX (510) 489-6372 13301 MCCALLEN PASS ! AUSTIN, TX 78753 ! PHONE (512) 287-2500 ! FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory July 10, 2012 Meru Networks, Inc. 894 Ross Dr. Sunnyvale, CA 94089 Dear Rajendran Chary, Enclosed is the EMC Wireless test report for compliance testing of the Meru Networks, Inc., Dual Radio 802.11abgn 3x3 Access Point with External Antenna - AP322e as tested to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Part 15, Subpart B, ICES-003, Issue 4 February 2004 for a Class B Digital Device and FCC Part 15 Subpart C, RSS-210, Issue 8, Dec. 2010 for Intentional Radiators. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\Meru Networks, Inc.\EMCS34526A-FCC247 Rev. 2) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. Electromagnetic Compatibility Meru Networks, Inc. Cover Page Dual Radio 802.11abgn 3x3 Access Point with External Antenna - AP322e CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMCS34526A-FCC247 Rev. 2 © 2012, MET Laboratories, Inc. Page ii of xxii DOC-EMC702 6/18/2009 Electromagnetic Compatibility Criteria Test Report for the Meru Networks, Inc. Dual Radio 802.11abgn 3x3 Access Point with External Antenna - AP322e Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class B Digital Devices & 15.247 Subpart C & RSS-210, Issue 8, Dec. 2010 for Intentional Radiators MET Report: EMCS34526A-FCC247 Rev. 2 July 10, 2012 Prepared For: Meru Networks, Inc. 894 Ross Dr. Sunnyvale, CA 94089 Prepared By: MET Laboratories, Inc. 3162 Belick St. Santa Clara, CA 95054 Electromagnetic Compatibility Meru Networks, Inc. Cover Page Dual Radio 802.11abgn 3x3 Access Point with External Antenna - AP322e CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMCS34526A-FCC247 Rev. 2 © 2012, MET Laboratories, Inc. Page iii of xxii DOC-EMC702 6/18/2009 Electromagnetic Compatibility Criteria Test Report for the Meru Networks, Inc. Dual Radio 802.11abgn 3x3 Access Point with External Antenna – AP322e Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class B Digital Devices & 15.247 Subpart C & RSS-210, Issue 8, Dec. 2010 for Intentional Radiators Anderson Soungpanya, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules Parts 15B, 15.247 and Industry Canada standards ICES-003, Issue 4 February 2004, RSS-210, Issue 8, Dec. 2010 under normal use and maintenance. Shawn McMillen, Wireless Manager, Electromagnetic Compatibility Lab Electromagnetic Compatibility Meru Networks, Inc. Report Status Dual Radio 802.11abgn 3x3 Access Point with External Antenna - AP322e CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMCS34526A-FCC247 Rev. 2 © 2012, MET Laboratories, Inc. Page iv of xxii DOC-EMC702 6/18/2009 Report Status Sheet Revision Report Date Reason for Revision  June 5, 2012 Initial Issue. 1 June 6, 2012 Revised to update antenna model numbers. 2 July 10, 2012 Revised to reflect engineer corrections. Electromagnetic Compatibility Meru Networks, Inc. Table of Contents Dual Radio 802.11abgn 3x3 Access Point with External Antenna - AP322e CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMCS34526A-FCC247 Rev. 2 © 2012, MET Laboratories, Inc. Page v of xxii DOC-EMC702 6/18/2009 Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. Executive Summary ............................................................................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview .............................................................................................................................................................4 B. References ...........................................................................................................................................................5 C. Test Site ..............................................................................................................................................................5 D. Description of Test Sample .................................................................................................................................6 E. …

Text truncated - open the document above for the full version.

Electromagnetic Compatibility Meru Networks, Inc. Intentional Radiators Dual Radio 802.11abgn 3x3 Access Point with External Antenna - AP322e CFR Title 47, Part 15B, 15.247; RSS-210, Issue 8, Dec. 2010 & ICES-003 MET Report: EMCS34526A-FCC247 Rev. 2 © 2012, MET Laboratories, Inc. Page 126 of 271 DOC-EMC702 6/18/2009 Plot 271. Radiated Spurious Emissions, Low Channel, 802.11a, 7 dBi Patch, 7 – 18 GHz, 5 GHz Plot 272. Radiated Spurious Emissions, Mid Channel, 802.11a, 7 dBi P…

Text truncated - open the document above for the full version.