REB-APXXX1HIPATH WIRELESS ACCESS POINT ( AP)

HiPath Wireless Controller, Access Points and Convergence Software, V4.0 C10/C100/C1000 User Guide *1PA31003-W1040-U101-1-7619* 1P A31003-W1040-U101-1-7619 The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. The trademarks used are owned by Siemens AG or their respective owners. Warning Hackers who unlawfully gain access to customer telecommunications systems are criminals. Currently, we do not know of any telecommunications system that is immune to this type of criminal activity. Siemens AG will not accept liability for any damages which result from unauthorized use. Although Siemens has designed security features into its products, it is your sole responsibility to use the security features and to establish security practices within your company, including training, security awareness, and call auditing. Siemens sales and service personnel, as well as Siemens business partners, are available to work with you to help you guard against this unauthorized use of your telecommunications system. July 2006 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical, electronic, photocopying, recording, or otherwise, without prior written permission of Siemens. The software described in this publication is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Request Siemens publications from your Siemens representative or the Siemens branch serving you. Copyright © 2006 Siemens AG. All rights reserved. © Siemens AG 2006 ● Siemens Communications, Hofmannstraße 51, D-81359 München, Germany Reference No.: A31003-W1040-U101-1-7619 Subject to availability. Right of modification reserved. hwc1000_user_guidetoc.fm A31003-W1040-U101-1-7619, July 2006 DRAFT HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide 3 Nur für den internen GebrauchContent Content0 1 About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 Who should use this guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.2 What is in this guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.3 Formatting conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1.4 Documentation feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1.5 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1.6 Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1.7 Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2 Regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.1 WLAN HiPath Wireless Controller C10/C100/C1000/C2400 . . . . . . . . . . . . . . . . . . . . . 17 2.2 AP2610 Internal Antenna AP, AP2620 External Antenna AP . . . . . . . . . . . . . . . . . . . . 18 2.2.1 United States - FCC Declaration of Conformity Statement . . . . . . . . . . . . . . . . . . . 18 2.2.1.1 FCC RF Radiation Exposure Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2.2.2 Canada - Department of Communications Compliance Statement. . . . . . . . . . . . . 20 2.2.3 European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2.2.3.1 Declaration of Conformity in Languages of the European Community. . . . . . . 22 2.2.4 Conditions of Use in the European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 2.2.5 Certifications of Other Countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3 Overview of the Controller, Access Points and Convergence Software solution . . 29 3.1 Conventional wireless LANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3.2 Elements of the solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.3 Controller, Access Points and Convergence Software and your network . . . . . . . . . . . 33 3.3.1 Network traffic flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3.3.2 Network security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 3.3.2.1 Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 3.3.2.2 Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.3.3 Virtual Network Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.3.4 Static routing and routing protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 3.3.5 Packet filtering policy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 3.3.6 Mobility and roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 3.3.7 Network availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 3.3.8 Quality of Service (QoS) . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

July 14, 2006 TIMCO ENGINEERING INC. P.O. Box 370 849 N.W. State Road 45 Newberry, Florida USA 32669 Subject: Certification Authorization under FCC Part 15, Subpart C, Sec. 15.247 - Digital Modulation Transmitters operating in the frequency band 2400 - 2483.5 MHz and 5.725-5.850 GHz and FCC Part 15, Subpart E - Unlicensed National Information Infrastructure Devices operating in the Frequency Bands 5.15-5.25 GHz (indoor operation only) and 5.25-5.35 GHz. Product: HiPath Wireless Access Point Model No.: AP2601, AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 Dear Sir/Madam, As appointed agent for Chantry Networks Inc. - A Siemens Company, we would like to submit this application for FCC certification authorization of the above product. Please review all required documents uploaded to TIMCO Upload Web Site. If you have any queries, please do not hesitate to contact us. Yours truly, Tri Minh Luu, P. Eng., V.P., Engineering Encl. UltraTech Group of Labs Ultratech’s Accreditations: 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

Annex 2: External Photographs of Device under Test Photo # 1 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Models AP2620 or AP2640 with External Antennas Annex 2: External Photographs of Device under Test Photo # 2 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Models AP2610 or AP2630 with Internal Antennas Annex 2: External Photographs of Device under Test Photo # 3 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Models AP2610 or AP2630 with Internal Antennas/External Antenna

Size 4.81 x 1.06Measure to inside of tics FCC ID: REB-APXXX1

Annex 3: Internal Photographs of Device under Test Photo # 1 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Internal Antenna Unit Annex 3: Internal Photographs of Device under Test Photo # 2 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Internal Antenna Unit Annex 3: Internal Photographs of Device under Test Photo # 3 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Internal Antenna Unit Annex 3: Internal Photographs of Device under Test Photo # 4 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Internal Antenna Unit Annex 3: Internal Photographs of Device under Test Photo # 5 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX External Antenna Unit Annex 3: Internal Photographs of Device under Test Photo # 6 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX External Antenna Unit Annex 3: Internal Photographs of Device under Test Photo # 7 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX External Antenna Unit Annex 3: Internal Photographs of Device under Test Photo # 8 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX External Antenna Unit

FCC Part 15, Subpart C, Section 15.247 – Digital Modulation Transmitters Page 39 FCC Part 15, Subpart E – U-NII Devices HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 ULTRATECH GROUP OF LABS File #: CNI-063FCC15CE – July 10 06 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 July 10, 2006 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com • All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) 5.4. RF EXPOSURE REQUIREMENTS [§§ 15.247(b)(4), 1.1310 & 2.1091] 5.4.1. Limits ƒ FCC 15.247(b)(4): Systems operating under provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See @ 1.1307(b)(1). ƒ FCC 1.1310:- The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b). LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (A) Limits for Occupational/Control Exposures 1500-100,000 ... ... 5 6 (B) Limits for General Population/Uncontrolled Exposure 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 5.4.2. Method of Measurements In order to demonstrate compliance with MPE requirements (see Section 2.1091), the following information is typically needed: (1) Calculation that estimates the minimum separation distance (20 cm or more) between an Antenna Port “A”nd persons required to satisfy power density limits defined for free space. Calculation Method of RF Safety Distance : S = PG/4Πr 2 =EIRP/4Πr 2 Where: P: power input to the antenna in mW EIRP: Equivalent (effective) isotropic radiated power. S: power density mW/cm 2 G: numeric gain of antenna relative to isotropic radiator r: distance to centre of radiation in cm r = PG/4ΠS (2) Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement (3) Any caution statements and/or warning labels that are necessary in order to comply with the exposure limits (4) Any other RF exposure related issues that may affect MPE compliance FCC Part 15, Subpart C, Section 15.247 – Digital Modulation Transmitters Page 40 FCC Part 15, Subpart E – U-NII Devices HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 ULTRATECH GROUP OF LABS File #: CNI-063FCC15CE – July 10 06 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 July 10, 2006 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com • All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) 5.4.3. Test Data Frequency (MHz) Highest Conducted Peak Power at the Antenna Terminal (dBm) Maximum Antenna Gain (dBi) Maximum Measured Total EIRP (dBm) Minimum RF Safety Distance r (cm) External Antenna 2412-2462 22.7 4.0 26.7 6.1 5745-5825 22.6 4.3 26.9 6.2 Internal Antenna 2412-2462 22.9 5.0 27.1 6.4 5745-5825 21.8 4.3 26.1 5.7 Note : RF EXPOSURE DISTANCE LIMITS: r = (PG/4ΠS) 1/2 = (EIRP/4ΠS) 1/2 Limits for General Population/Uncontrolled Exposure: S = 1.0 mW/cm 2 Evaluation of RF Exposure Compliance Requirements RF Exposure Requirements Compliance with FCC Rules Minimum calculated separation distance between Antenna Port “A”nd persons: 6.4 cm Manufacturer’ instruction for separation distance between Antenna Port “A”nd persons required: 20 cm. Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement N/A Caution statements and/or warning labels that are necessary in order to comply with the exposure limits Refer to user’s manual for RF Exposure information. Any other RF exposure related issues that may affect MPE compliance N/A

FCC Part 15, Subpart C, Section 15.247 – Digital Modulation Transmitters Page 183 FCC Part 15, Subpart E – U-NII Devices HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 ULTRATECH GROUP OF LABS File #: CNI-063FCC15CE – July 10 06 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 July 10, 2006 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com • All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) 6.2. RF EXPOSURE REQUIRMENTS [§ 15.407(f), 1.1310 & 2.1091] 6.2.1. Limits ƒ FCC 15.407(f): U-NII devices are subject to the radio frequency radiation exposure requirements specified in Sec. 1.1307(b), Sec. 2.1091 and Sec. 2.1093 of this chapter, as appropriate. All equipment shall be considered to operate in a ``general population/uncontrolled'' environment. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement must be submitted to the Commission upon request. ƒ FCC 1.1310:- The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b). LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (B) Limits for General Population/Uncontrolled Exposure 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 6.2.2. Method of Measurements In order to demonstrate compliance with MPE requirements (see Section 2.1091), the following information is typically needed: 1. Calculation that estimates the minimum separation distance (20 cm or more) between an Antenna Port “A”nd persons required to satisfy power density limits defined for free space. Calculation Method of RF Safety Distance : S = PG/4Πr 2 =EIRP/4Πr 2 Where: P: power input to the antenna in mW EIRP: Equivalent (effective) isotropic radiated power. S: power density mW/cm 2 G: numeric gain of antenna relative to isotropic radiator r: distance to centre of radiation in cm r = PG/4ΠS 2. Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement 3. Any caution statements and/or warning labels that are necessary in order to comply with the exposure limits 4. Any other RF exposure related issues that may affect MPE compliance FCC Part 15, Subpart C, Section 15.247 – Digital Modulation Transmitters Page 184 FCC Part 15, Subpart E – U-NII Devices HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 ULTRATECH GROUP OF LABS File #: CNI-063FCC15CE – July 10 06 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 July 10, 2006 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com • All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) 6.2.3. Test Data Frequency (MHz) Highest Conducted Peak Power at the Antenna Terminal (dBm) Maximum Antenna Gain (dBi) Maximum Measured Total EIRP (dBm) Minimum RF Safety Distance r (cm) External Antenna 5250 – 5350 14.7 5.0 19.7 3.0 Internal Antenna 5250 – 5350 14.9 4.3 19.17 3.0 Note : RF EXPOSURE DISTANCE LIMITS: r = (PG/4ΠS) 1/2 = (EIRP/4ΠS) 1/2 Limits for General Population/Uncontrolled Exposure: S = 1.0 mW/cm 2 Evaluation of RF Exposure Compliance Requirements RF Exposure Requirements Compliance with FCC Rules Minimum calculated separation distance between Antenna Port “A” and persons: 3.0 cm Manufacturer’ instruction for separation distance between Antenna Port “A” and persons required: 20 cm. Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement N/A Caution statements and/or warning labels that are necessary in order to comply with the exposure limits Refer to user’s manual for RF Exposure information. Any other RF exposure related issues that may affect MPE compliance N/A

2.2.1.1 FCC RF Radiation Exposure Statement The AP26XX access point complies with FCC RF radiated exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This device has been tested and has demonstrated compliance when simultaneously operated in the 2.4 GHz and 5 GHz frequency ranges. This device must not be co-located or operated in conjunction with any other antenna or transmitter. !> The radiated output power of the AP26XX is far below the FCC radio frequency exposure limits as specified in "Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields" (OET Bullet 65, Supplement C). This equipment should be installed and operated with a minimum distance of 20 centimeters (8 inches) between the radiator and your body or other co-located operating antennas.

July 14, 2006 TIMCO ENGINEERING INC. P.O. Box 370 849 N.W. State Road 45 Newberry, Florida USA 32669 Subject: Certification Authorization under FCC Part 15, Subpart C, Sec. 15.247 - Digital Modulation Transmitters operating in the frequency band 2400 - 2483.5 MHz and 5.725-5.850 GHz and FCC Part 15, Subpart E - Unlicensed National Information Infrastructure Devices operating in the Frequency Bands 5.15-5.25 GHz (indoor operation only) and 5.25-5.35 GHz. Product: HiPath Wireless Access Point Model No.: AP2601, AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 Dear Sir/Madam, As appointed agent for Chantry Networks Inc. - A Siemens Company, we would like to submit this application for FCC certification authorization of the above product. Please review all required documents uploaded to TIMCO Upload Web Site. If you have any queries, please do not hesitate to contact us. Yours truly, Tri Minh Luu, P. Eng., V.P., Engineering Encl. UltraTech Group of Labs Ultratech’s Accreditations: 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] July 14, 2006 Chantry Networks Inc. - A Siemens Company 1900 Minnesota Court, Suite 125 Mississauga, Ontario Canada, L5N 3C9 Attn.: Mr. Steve Franjic Subject: Certification Authorization under FCC Part 15, Subpart C, Sec. 15.247 - Digital Modulation Transmitters operating in the frequency band 2400 - 2483.5 MHz and 5.725-5.850 GHz and FCC Part 15, Subpart E - Unlicensed National Information Infrastructure Devices operating in the Frequency Bands 5.15-5.25 GHz (indoor operation only) and 5.25-5.35 GHz. Product: HiPath Wireless Access Point Model No.: AP2601, AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 Dear Mr. Franjic, The product sample, as provided by you, has been tested and found to comply with FCC Part 15, Subpart C, Section 15.247 - Digital Modulation Transmitters operating in the frequency band 2400 - 2483.5 MHz GHz and 5.725-5.850 GHz and FCC Part 15, Subpart E - Unlicensed National Information Infrastructure Devices operating in the frequency bands 5.15-5.25 GHz (indoor operation only) and 5.25-5.35 GHz. Enclosed you will find copy of the engineering report. If you have any queries, please do not hesitate to contact us. Yours truly, Tri Minh Luu, P. Eng., V.P., Engineering Encl. UltraTech Group of Labs Ultratech’s Accreditations: 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] ENGINEERING TEST REPORT HiPath Wireless Access Point Model No.: AP2601, AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 Applicant: Chantry Networks Inc. - A Siemens Company 1900 Minnesota Court, Suite 125 Mississauga, Ontario Canada, L5N 3C9 In Accordance With FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15, Subpart C, Section 15.247 - Digital Modulation Transmitters Operating in the Frequency Band 2400 - 2483.5 MHz and 5.725-5.850 GHz & Part 15, Subpart E Unlicensed National Information Infrastructure Devices Operating in Frequency Bands 5.15-5.25 GHz (indoor operation only) and 5.25-5.35 GHz UltraTech's File No.: CNI-063FCC15CE – July 14 06 This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: July 14, 2006 Report Prepared by: Tri Luu, P.Eng. Issued Date: July 14, 2006 Tested by: Mr. Hung Trinh, RFI Technologist Test Dates: July 04-07, 2006 ƒ The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected. ƒ This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R FCC Part 15, Subpart C, Section 15.247 – Digital Modulation Transmitters Page 2 FCC Part 15, Subpart E – U-NII Devices HiPath Wireless Access Point, Model AP2601, AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 ULTRATECH GROUP OF LABS File #: CNI-063FCC15CE – July 14 06 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 July 14, 2006 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com • All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION ......................................................................................................................................... 4 1.1. SCOPE......................................................................................................................................................................... 4 1.2. RELATED SUBMITTAL(S)/GRANT(S)................................................................................................................... 4 1.3. NORMATIVE REFERENCES ................................................................................................................................... 4 EXHIBIT 2. PERFORMANCE ASSESSMENT .............................................................................................................. 5 2.1. CLIENT INFORMATION .......................................................................................................................................... 5 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION ............................................................................................. 5 2.3. EUT’S TECHNICAL SPECIFICATIONS .........................................................................................................…

Text truncated - open the document above for the full version.

Annex 1: Photographs of Test Setup Page # 1 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #1: DC Powerline Conducted Emissions Annex 1: Photographs of Test Setup Page # 2 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #2: DC Powerline Conducted Emissions Annex 1: Photographs of Test Setup Page # 3 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #3: HiPath Wireless Access Point with in ternal antennas – Test Orthogonal Position #1 Annex 1: Photographs of Test Setup Page # 4 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #4: HiPath Wireless Access Point with internal antennas – Test Orthogonal Position #2 Annex 1: Photographs of Test Setup Page # 5 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #5: HiPath Wireless Access Point with internal antennas – Test Orthogonal Position #3 Annex 1: Photographs of Test Setup Page # 6 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #6: HiPath Wireless Access Point with external antennas – Test Orthogonal Position #1 Annex 1: Photographs of Test Setup Page # 7 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #7: HiPath Wireless Access Point with external antennas – Test Orthogonal Position #2 Annex 1: Photographs of Test Setup Page # 8 HiPath Wireless Access Point, Model AP2610, AP2620, AP2630 and AP2640 FCC ID: REB-APXXX1 IC: 4702A-APXXXX Photo #8: HiPath Wireless Access Point with external antennas – Test Orthogonal Position #3