RF6172NLCD Monitor

MENUAL 172N LCD MONITOR ALLINONE DISPLAY INC. www.aodlcd.com FCC NOTE :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. TABLE OF CONTENTS 0. Connection To the Monitor 1. Installation 2. Features 3. Plug and Play Function 4. Safety Precautions 5. Contents Of the Retail Package 6. OSD (On-Screen-Menu) 7. OSD Controls 7.1 Brightness 7.2 Contrast 7.3 H.Position 7.4 V.Position 7.5 CLOCK 7.6 CLOCK PHASE 7.7 COLOR Control 7.8 Language 7.9 Information 7.10 OSD 7.11 Auto Adjust 8. Troubleshooting 9. Specifications 11. Video Mode D-SUBDVI DC 12V SPEAKER IN 0. Cable Connection 1. Installation •Connect the signal(VGA) cable to the VGA port of computer. Tighten the two thumbscrews by turning clockwise. •You can adjust the connection for your PC environment. •Plug the DC cord of the AC adapter to the power connector and the plug the end of AC adapter to and electrical outlet socket(110V/220V) •Connect DC cord of adapter (12V DC) to the monitor.. 2. Features •172N is 17” SXGA LCD monitor and support up to 75Hz. •You can adjust brightness, contrast, horizontal & vertical positions by OSD menus and use auto adjust function for instant adjustment. •High-qualified LCD Controller inside •Compact space saving design and power saving mode •100% compatible with Windows PC environment without the installation of driver CD or software program. 3. Plug and Play Function 172N can be installed and connected automatically to any computer systems without driver CD or software programs. Monitor will recognize the optimized value of video mode by DDC(Display Data Channel) method that makes the graphic card of computer to communicate with the monitor. 172N supports VESA DDC 1/2B. 4. Safety Precautions We strongly recommend that you carefully read this User’s Manual before operating your LCD monitor. FOLLOW INSTRUCTIONS in this manual. Please read and comprehend all using directives before use this machine. ●Power — Use the type of power indicated on the marking label. ●Adapter — Only use an adapter designed of the LCD monitor. ●Plugs — Do not remove any of the prongs of the monitor's three-pronged power plug. — Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time. ●Power and extension cords — Use the proper power cord with ground conductor — Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed 7 amperes. — Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. ●Care and maintenance ᅳSlots and openings in the cabinet are provided for ventilation. Do not block or cover these openings. ᅳDo not push objects of any kind into cabinet slots or openings. The screen surface is easily scratched. ᅳDo not use paper towels to clean the display. Avoid touching it with your fingers, pens, or pencils. ᅳTurn off the AC adapter and the monitor over long periods when not in use. 5. Contents Of the Retail Package Monitor User’s ManualAC/DC AdaptorPower Cord VGA Cable Audio Cable PowerMenu Enter<> Hot key ON/OFF LED Green(ON) / Red (Stand-by) Auto/ (exit) Auto Adjust/ Menu OFF Menu Operating condition Orange : No Signal Auto Adjust/ Menu OFF Enter Launch OSD Menu ( Select ) Buttons FunctionStatus Power Turn the power ON or Off Select OSD Menu Move to OSD MenuAdjust Brightness Launch OSD Menu or down values Launch OSD Menu or Add values Move to OSD MenuAdjust Brightness 6. OSD (On-Screen-Menu) OSD Controls 1. Color COLOR 1024 x 768 MENU ÆSelect COLOR ÆUP / DOWN KEY 1) Adjust Contrast 3) Adjust Color 4) Adjust Color Temp 5) Adjust R.G.B value 2) Adjust Brightness 1) Adjust Horizontal Position 3) Adjust Sharpness 4) Adjust Phase 5) Optimize Image and eliminate Noise 2) Adjust Vertical Position MENU ÆSelect PICTURE ÆUP / DOWN KEY 2. PICTURE PICTURE Contrast Brightness Gamma Correct Color Temp Color Adjust Exit 1024 x 768 3. FUNCTION FUNCTION Auto Adjust Auto Position Auto Phase Auto Clock Auto Color Exit 1) Run Auto-Adjust Function for optimization 3) Automatically adjust phase 5) Automatically adjust color status 2) Automatically adjust screen position MENU ÆSelect FUNCTION ÆUP / DOWN KEY 4) Automatically adjust image and eliminate noise H.Position V.Position Sharpness Phase Clock Exit 4. OSD MENU 5. MISCELLANEOUS OSD MENU 1024 x 768 Language OSD H.Position OSD V.Position OSD Timer Translucent Exit 1) Select Language 3) Adjust OSD Vertical Position 4) Select OSD Auto Timer 5) Select transparent st…

Text truncated - open the document above for the full version.

NST_RTD_1.0 BLOCK DIAGRAM MEMORY CLOCK: 24.000MHz TYPE: SMD, C0:18pF MAIN CLOCK: 24.576MHz TYPE: SMD, C0:18pF #2 : LVDS LM181 E1 & E3 SCALER DVIVGA EVEN 8 DVI SINGLE POWER DIGITAL IN LCD OUTPUT 12V ONLY EVEN 8 MCU PART CHIP CONTROL LVDS CH2 EVEN 8 CONNECTOR RGB IN ODD 8 MCU ODD 8 DIGITAL PART D-SUB LVDS CH1 24WC02J ANALOG PART POWER ISCL/ISDA LVDS 30P OSD CHIP ENABLE DDC #1 : LVDS SS E4 : LVDS LP157E1 INVERTER 24LC08 DDC DVI DDC 24LC21 SCL/SDA EEPROM ODD 8 MAIN CLOCK 24.576MHz MCU CLOCK 24.000MHz

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 4 ٛ 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 14of 21 November 4, 2005 EUT Front Rear

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 4 ٛ 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 21of 21 November 4, 2005 Appendix – Sample Label ALL IN ONE DISPLAY.INC. Product : LCD MONITOR Model : 172N S / N : 172N051031049 Power : 100 ~ 240 VAC / 50~60 Hz / 1.5A DC 12 V / 3.33A FCC ID : RF6172N THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION Made in KOREA

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 15of 21 November 4, 2005 Inside AC/DC adapter E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 16of 21 November 4, 2005 Port N/A E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 17of 21 November 4, 2005 Inverter board (Front) Inverter board (Rear) E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 18of 21 November 4, 2005 AD Board ( Front ) AD Board ( Rear ) E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 19of 21 November 4, 2005 OSD Board ( Front ) OSD Board ( Rear ) E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 20of 21 November 4, 2005 LCD Panel (Front) LCD Panel (Rear)

NST_RTD_1.0 CIRCUIT MT1 MTH OLE 1 MT2 MTH OLE 1 + C1 25V/470u 3PVCC J1_1 5267-02 1 2 U1 LM1085_3_3V 1 32 4 G N D VIVO VO IN5 INSIK_MARK 1 5DVCC 5DVCC D1 SS34 1 2 ADC_ 3AVCC + C8 47uF/16V 2. 5D VCC MT5 MTH OLE 1 J1 D C-JAC K(2pi) 1 2 3 PANEL 3DVCC R77 3.3K MT4 MTH OLE 1 RTD 2.5DVCC BOM 삭제 L1 47uH * 수정 20050630 MT3 MTH OLE 1 IN2 INSIK_MARK 1 PANEL_5VCC SOT-89 SMD TYPE RTD2522_DE_BA Power B 15Friday , September 23, 2005 Tit le SizeDocument NumberRev Date:Sheet of + C5 470uF 16V SHL C6 0.1uF 12V IN1 INSIK_MARK 1 IN4 INSIK_MARK 1 IN6 INSIK_MARK 1 3DVCC 12V R3 0 3AVCC1 RTD 3DVCC U2 AP1501 1 3 2 4 5 6 VI G N D VO F / B S/T G N D D2 IN4004 12 IN3 INSIK_MARK 1 RTD 3PVCC PANEL_3VCC + C2 47uF/16V U3 RCT1117_2.5 1 23 4 A D J VOVI VO NST_RTD_1.0 Bus_Power C27 100nF DDC_SCL CN11_1A 53014-14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 D9KDS226 3 1 2 RXEIN3- RXOIN3- CN1 DV I- CON 25 34 1 2 3 6 7 8 9 10 11 14 15 16 17 18 19 23 24 27 28 29 30 31 26 22 4 5 12 13 20 21 SHELL1 gnd DATA2- DATA2+ DATA2/4 SHLD DDC CLK DDC DATA A-VSHNC DATA1- DATA1+ DATA1/3 SHLD +5v GND H-PLUG-DET DATA0- DATA0+ DATA0/5 SHLD CLK+ CLK- A-RED A-GREEN A-BLUE A-HSY NC A-GND SHEL12 CLK-SHLD DATA4- DATA4+ DATA3- DATA3+ DATA5- DATA5+ PCB기준 0.5mm이동(10/11) PW_PANEL DDC2_SCL R82 1K R78 4.7K R27 75 U13 X2 4 C 0 2 8 5 6 4 7 3 2 1 VCC SDA SCL GND WP A2 A1 A0 3DVCC R760 D6 KDS226 SOT-23 SMD 12 3 RXOIN0- C38100nF C28 100nF R13100 * 20050315 추가 R2 1K C62 100n D16 KDS226 SOT-23 SMD 12 3 RXEIN1- DDC2_SDA BLUE C60 NC/1nF C3247nF D15KDS226 3 1 2 R16 NC/100 +C43 22uF_16V C51 100nF 5DVCC RXOIN3+ DDC_SCL C7 104 3AVCC1 2. 5DVCC C44 100nF 3PVCC RXOIN2- RED RXOIN0+ RXOIN0- C13 100nF LVDS_AVCC AHS 1 RXOIN3+ ADC_VCC PLL_GND C3610P 추가 20050317 D26 5.6B 1 3 C45 100nF RTD_SCSB RTD_RESET BLUE RXOIN1- RXECKIN+ C40 100nF C65 NC/1nF RXOCKIN+ RXEIN3- RED C14 100nF RXOIN1+ PLL_GND 수정 20050317 DDC2_SDA RXEIN1- 5DVCC RXEIN2+ 5DVCC 2 3. 수정 20050302 3DVCC DDC2_SCL RXOIN2- R19100 C63 NC/1nF RXOIN1+ RXEIN1+ RXECKIN+ R80 NC/100 R26 75 R79100 R4100 C20 100nF C48 100nF R58 4.7K C25 100nF 3 PW_PANEL DDC2_SDA RTD_SCSB DDC_SCL R83NC D19 5. 1B 1 3 3DVCC AHS * 20050617 추가 RXOIN3- Hot_Plug U5B 74HC14 34 1 4 7 D3 KDS226 3 12 AHS2 R3DVCC RXOIN0+ DDC_SDA C68 12P AVS2 13 RXECKIN- RXOCKIN- RXOIN2- D11KDS226 3 1 2 J2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 3031 32 D14KDS226 3 1 2 Near to Chip 3AVCC2 RXOIN3- R8 0 D13KDS226 3 1 2 ADC_VCC C64 10P RXEIN0+ RXOIN3+ LVDS_AVCC C42 100nF RTD2022 3 7 3 8 1 0 9 1 1 1 5 8 6 1 6 2 6 3 105 107 41 42 43 46 47 48 51 52 53 103 88 94 92 93 98 97 102 100 101 91 95 90 89 123 122 1 2 125 126 119 118 120 117 121 124 128 127 3 9 5 0 6 0 1 0 6 4 0 4 9 5 9 1 1 0 1 1 3 3 3 3 4 5 4 6 4 1 0 4 1 0 8 3 2 3 5 5 5 6 5 8 6 8 7 4 5 4 4 1 1 2 1 1 5 1 1 6 70 73 72 71 74 75 76 77 78 79 80 81 85 82 83 84 69 68 67 66 5 7 5 6 5 6 7 8 9 10 11 12 13 14 19 20 21 22 23 24 25 26 27 28 41 7 2 9 1 8 31 5 1 6 3 0 3 1 99 96 1 1 4 3 6 P W M 2 / T C O N [ 1 ] P W M 1 / R E F _ C L K D D C _ S C L D D C _ S D A S D I O S C L K S C S B R E S E T # AHS AVS V0 V1 V2 V3 V4 V5 V6 V7 VCLK GUARD_VDD GUARD_GND ADC_B_VDD ADC_B_GND B SOG G ADC_R_VDD ADC_R_GND R ADC_VDD ADC_GNDOFF ADC_REFIO ADC_GND PLL_TEST1 / IRQ PLL_TEST2 XO XI DPLL_VDD DPLL_GND APLL1_VDD APLL1_GND APLL2_VDD APLL2_GND APLL3_VDD APLL3_GND PLL_GUARD_VDD PLL_GUARD_GND G N D I O G N D I O G N D I O G N D I O V C C 3 3 V C C 3 3 V C C 3 3 V C C 3 3 G N D I O G N D K G N D K G N D K G N D K G N D K V C C K V C C K V C C K V C C K V C C K V C C K G N D K G N D K V C C K P W M 0 V C C K G N D K TMDS_VDD2 TMDS_GND2 RX2N RX2P TMDS_VDD1 RX1P RX1N TMDS_GND1 TMDS_VDD0 RX0P RX0N TMDS_GND0 TMDS_PLL_VDD RXCP RXCN TMDS_PLL_GND REXT TMDS_VDD TMD S _GN D TMDS_TST D D C 2 _ S C L D D C 2 _ S D A TODP TOD N TOC L KP TOC L KN TOCP TOC N TOBP TOBN TOAP TOAN TEDP TEDN TEC L KP TEC L KN TECP TECN TE BP TEBN TE AP TEAN L V D S _ G N D L V D S _ P L L _ G N D L V D S _ G N D L V D S _ G N D L V D S _ V D D L V D S _ V C C L V D S _ P L L _ V C C L V D S _ V C C L V D S _ T S T ADC_G_VDD ADC_G_GND T C O N [ 0 ] G N D K D4 KDS226 SOT-23 SMD 12 3 R730 R21 47K R81 100 D10KDS226 3 1 2 14 AVS 5DVCC RTD_SDO/SDI C15 100nF + C37 22uF_16V R6100 C46 100nF 3AVCC1 RTD_SDO/SDI C52 0.1uF RXOIN2+ C29 100nF C50 22pF R8533 C67 12P 12 5DVCC C21 100nF CONNECT RXOCKIN+ DGND R90 47K R39 4.7K R7100 C54 100nF C18 100nF 100 R17 C39 100nF AHS VOLUME RXEIN2+ RXOIN1- R91 47K 15 R3DVCC 3AVCC2 ADC_GND D12KDS226 3 1 2 R23 4.7K R87 47K C19 100nF RXOIN0+ RXOCKIN+ D17 KDS226 SOT-23 SMD 12 3 R28 75 R700 C3147nF BLUE CONNECT C11 100nF U5F 74HC14 1312 1 4 7 C3347nF DDC_SDA AVS2 R5 100 C47 100nF C41 100nF AVS RXOIN0- +C23 22uF_16V 10 RXOIN2+ * 20050617 수정 Bus_Power RXEIN0+ C57 100nF R10 47K/NC C53 0.1uF C17 100nF R22 47K R740 D18 5. 1B 1 3 U6 CONNECTED RTD_SCLK C3547nF RXEIN0- R720 100 R24 3AVCC2 DDC2_SCL * 20050315 추가 RED U5A 74HC14 12 1 4 7 C26 100nF * 20050617 수정 RXOCKIN- GREEN R750 R93 10K D201 1 2 Hot_Plug R9 NC D8KDS226 3 1 2 C56 100nF C92 33p C61 NC/1nF R690 R G B NC DGND RAGND GAGND BAGND NC DGND NC DDCSDA DDCSCL HSIN VSIN U6 VGA_CON15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 6 1 7 R221 10K Hot_Plug 3AVCC1 RXEIN2- RXECKIN- C16 100nF C59 12P C3410P * 20050315 추가 RXEIN0- CN2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 AHS2 R2.5DVCC 3AVCC1 DDC_SDA GREEN RXEIN3+ RXOIN1+ R710 R25 100 R59100R Y1 24. 576MHz D27 5. 6B 1 3 R1250 D5 KDS226 SOT-23 SMD 12 3 R86 47K C22 100nF 3PVCC DDC_SDA RXOIN1- * 20050315 추가 * 20050831 추가 R8433 C90 100nF RXEIN2- C12 100nF 1N4148 AVS VBRI 3AVCC2 Bus_Power R11 47K C3010P C3 10P U12 24C02 8 5 6 4 7 3 2 1 5DVCC SDA SCL GND TEST A2 A1 A0 NC * 20050617 수정 RXOIN2+ GREEN RXOCKIN- C58 100nF R18 100 TST1 1 U5E 74HC14 1110 1 4 7 DDC_SCL R60100R R14 NC/20K C49 22pF TMDS_AVCC RTD_SCLK RXEIN1+ RXEIN3+ +C250 10uF_16V C91 33p R20 100 * 20050923 추가 NST_RTD_1.0 AUTO_KEY D23 5.1B 1 2 R32 510 ENTER_KEY POWER_KEY DDC2_SCL CONNECT RTD_SCLK D25 5.1B 1 2 C9 104 R29 1M 5DVCC DDC_SCL MU TE RTD_SDO/SDI VCC C71 10pF POWER_KEY R38 47K C69 100N LEFT_KEY Y…

Text truncated - open the document above for the full version.

E E M M I I T T E E S S T T R R E E P P O O R R T T FCC EVALUATION REPORT FOR CERIFICATION KOREA Standard Technology Test report No.: KST-FCC0548 Applicant’s Name : ALL IN ONE DISPLAY. INC. Applicant’s Address : 3F, B-dong,. Micro office B/D 554-2, GaSan-Dong, GumChun-Ku, Seoul, Korea Manufacturer’s Name : ALL IN ONE DISPLAY. INC. Manufacturer’s Address : 3F, B-dong,. Micro office B/D 554-2, GaSan-Dong, GumChun-Ku, Seoul, Korea EUT’s: FCC ID : RF6172N Product Name : LCD MONITOR Model Number(s) : 172N Product Options : N/A Category : FCC Part 15 subpart B Class B Computing Digital Device Supplementary Information The device bearing the brand name and FCC ID specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and was tested in accordance with measurement procedures specified in ANSI C63.4-2003 . I attest to the accuracy of data and all measurements reported herein were performed by or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test Date : November 1, 2005 Issued Date : November 4, 2005 Te s t e d b y : Approved by: Jeong Seok JinLee, Weon-Woo E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 2of 21 November 4, 2005 Contents 1. Description of Device 2. Test Facility 3. MAP 4. Test system configuration 5. Description of E.U.T. 6. Summary of test results. 7. Test results. 8. Photographs. Appendix. Schematics E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 3of 21 November 4, 2005 1. Description of Device 1) Kind of equipment: LCD MONITOR 2) FCC ID: RF6172N 3) Model Name: 172N 4) Serial No.: 172N051031049 5) Type of Sample Tested: Pre-production 6) High Frequency Used: 24.576MHz, 24.000MHz 7) Adapter Model name : HDAD40W 101 Manufacturer : WUXI HARD ELECTRONICS CO., LTD Serial no : 050925 9) Power : INPUT: 100-240 V, 50/60 Hz, 1.5 A OUTPUT: 12.0 V, 3.33 A 9) Tested Power supply: 1phase AC120 V, 60 Hz 12) Date of Manufacture: October , 2005 13) Manufacture: ALL IN ONE DISPLAY. INC. 14) Description of Operating: Scroll All “H” Character Resolution 1024*768 Vertical Frequency: 75Hz 15) Dates of Test: November 1, 2005 16) Place of Tests: Korea Standard Technology EMC site 17) Test Report No: KST-FCC0548 E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 4of 21 November 4, 2005 2. Test Facility The open field test site and conducted measurement facility are used for these testing, where are located following address and drawing. This site was fully described in a report dated November 14, 2002, that was submitted to the FCC. Korea Standard Technology ( KOSTEC Co., Ltd) Head office & Test Lab ; :180-254, Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Telephone Number : 82-31-222-4251 Facsimile Number: 82-31-222-4252 MIC(Ministry of Information and Communication) Number: KR0041 FCC Filing Number. : 525762 VCCI Membership Number : 2005 VCCI Registration Number : R-1657 / C-1763 E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 5of 21 November 4, 2005 3. Route Map of Measurement Facility Korea Hwasung-shi (open area test site) KOSTEC Co., Ltd E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 6of 21 November 4, 2005 4. Test System Configuration Operation Environment Ambient Temperature ( °C ) Humidity ( % ) Pressure ( hPa ) 10 m Open Area site 19 43 1017 Shielded room: 19 44 1017 Test site These testing were performed following locations ; Shielded room : Conducted Emission, 10 m Open Area Site: Radiated Emission Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are test receiver, Cable loss, antenna factor calibration, Antenna directivity, antenna factor variation with height, antenna phase center variation, antenna frequency interpolation, measurement distance variation, site imperfection, mismatch, and system repeatability. Based on NIS 80, 81, The measurement uncertainty level with a 95% confidence level were applied. sample calculation Conducted emission The field strength is calculated by adding the LISN factor, cable loss from the measured reading. The sample calculation is as follows: FS = MR + LF + CL MR = Meter Reading LF = LISN Factor CL = Cable Loss If MR is 30 dB, LISN Factor 1 dB, CL 1 dB The result (MR) is 30 + 1 + 1 = 32 dBuV E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 7of 21 November 4, 2005 5. Description of E.U.T. Product Description Manufactured By: ALL IN ONE DISPLAY.INC. Address: 3F, B-dong,. Micro office B/D 554-2, GaSan-Dong, GumChun-Ku, Seoul, Korea Model: 172N Serial Number: 172N051031049 Configuration of EUT Description Manufacturer Model/Part # Serial Number LCD Panel SamSung LTM170EX-L21 6Z5JC1406H AD Board ALL IN O…

Text truncated - open the document above for the full version.

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 8of 21 November 4, 2005 Peripherals No Description Manufacturer Model/Part # Serial Number 1 PC TGKOREA HP Pabilion T212k KRJ32101BH 2 LCD MONITOR ALL IN ONE DISPLAY.INC. 172N 172N051031049 3 AC/DC Adapter WUXI HARD ELECTRONICS CO., LTD HDAD40W 101 050925 4 Keyboard HP 5219 BN31719954 5 Mouse HP M042K0 30205141 6 Printer EPSON STYLUS PHOTO 870 B6BY000604 7 8 E.U.T Test Configuration (example) 6. Summary of test results Modification to the E.U.T. - None Result : - PASS 2 3 5 1 4 6 E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 12of 21 November 4, 2005 8.PHOTOGRAPHS Conducted emission ( Front ) Conducted emission ( Rear ) E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0548 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 13of 21 November 4, 2005 Radiated Emission ( Front ) Radiated Emission ( Rear )