
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Leica GR30/GM30/GR50 User Manual Version 3.1 English Introduction Congratulations on the purchase of the Leica GR30/GM30/GR50. The model and serial number of your product are indicated on the type label. Always refer to this information when contacting your agency or Leica Geo- systems authorised service centre. This manual contains important safety directions as well as instructions for setting up the product and operating it. Refer to 1 Safety Directions for fur- ther information. Read carefully through the User Manual before you switch on the product. The content of this document is subject to change without prior notice. Ensure that the product is used in accordance with the latest version of this docu- ment. Updated versions are available for download at the following Internet address: https://myworld-portal.leica-geosystems.com/ > myDownloads •Windows® is a registered trademark of Microsoft Corporation in the United States and other countries • SD Logo is a trademark of SD-3C, LLC. •Bluetooth® is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective owners. This manual applies to the GR30/GM30/GR50. NameDescription/Format GR30/GM30/GR50 Quick Guide Provides an overview of the product together with technical data and safety dir- ections. Intended as a quick reference guide. üü GR30/GM30/GR50 User Manual All instructions required in order to operate the product to a basic level are contained in the User Manual. Provides an overview of the product together with technical data and safety directions. – ü GR/GM Series Oper- ational Manual (Online Help) Comprehensive guide to the product and the operation. Includes a description of the hardware installation and common accessor- ies. Software setup is described in detail, along with the technical specifications. The complete manual can be viewed online via the GR/GM series web interface. – ü GNSS Reference Station and Networks - An Introductory Guide Offers practical advice on how to set up and run individual GNSS reference stations and networks of stations and to provide the ser- vices that are required. üü Purchase Product identification ☞ Trademarks Validity of this manual Available documentation 2 NameDescription/Format GNSS Networks and Reference Stations Equipment List Detailed list of equipment available for GNSS reference stations including hardware and software. – ü Monitoring Equipment List Detailed list of equipment available for mon- itoring sites including hardware and soft- ware. – ü Refer to the following resources for documentation/software: • the Leica USB documentation card • https://myworld-portal.leica-geosystems.com/ https://myworld-portal.leica-geosystems.com/ offers a wide range of services, information and training material. With direct access to myWorld, you are able to access all relevant services whenever it is convenient for you. The availability of services depends on the instrument model. ServiceDescription My ProductsRegister all products that you and your company own and explore your world of Leica Geosystems: View detailed information on your products and update your products with the latest software and keep up-to-date with the latest documentation. My ServiceView the current service status and full service his- tory of your products in Leica Geosystems service centres. Access detailed information on the services performed and download your latest calibration cer- tificates and service reports. My SupportCreate new support requests for your products that will be answered by your local Leica Geosystems support team. View your complete support history and view detailed information on all your support requests. KnowledgeEnter key words and start searching in our know- ledge base. You can find FAQs (Frequently asked questions) as well as Knowledge articles for Leica Geosystems products. DownloadsDownloads of software, manuals, tools, training material and news for Leica Geosystems products. Download the latest documentation and software to keep yourself and your products up‑to‑date. You can access downloads of software, manuals, tools, and training material. Online LearningWelcome to the home of Leica Geosystems online learning! There are numerous online courses – avail- able to all customers with products that have valid CCPs (Customer Care Packages). 3 ServiceDescription My SmartNetAdd and view your HxGN SmartNet subscriptions and user information. HxGN SmartNet delivers high- precision and high-availability GNSS network correc- tion services in real-time and around the globe. The HxGN SmartNet Global family offers Network RTK with RTK bridging and Precise Point Positioning (PPP) services. These services work exclusively with Leica Geosystems GS smart antennas and receiv- ers, providing the highest accuracy. Combined, they ensure HxGN SmartNet coverage everywhere. My Trusted ServicesLeica Geosystems Trusted Services offer you increased productivity while at the same time providing maximum security. New software services and state‑of‑the‑art IT infrastructure offer a vast potential to optimise your workflow and increase your efficiency and productivity, both now and in the future. My SecurityLeica Geosystems Security delivers you total peace‑of‑mind in knowing that if your instrument is ever stolen, a locking mechanism is available to ensure that the instrument is disabled and can no longer be used. 4 Table of Contents 1Safety Directions7 1.1General Introduction7 1.2Definition of Use8 1.3Limits of Use8 1.4Responsibilities9 1.5Hazards of Use9 1.5.1General9 1.5.2Additionally for the Power Supplies13 1.5.3Additionally for the Car Battery14 1.5.4Lightning Protection15 1.6Electromagnetic Compatibility (EMC)19 2Description of the System22 2.1General Information22 2.2GNSS Reference Station Components24 2.3Unpacking the Instrument26 2.4Instrument Components26 2.5Operation27 2.6Software29 2.7Power Supply30 3Installation32 3.1Before Installation32 3.2Installation Option…
Text truncated - open the document above for the full version.
The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Direct Phone: Phone +41 71 727 31 31 E-Mail: $e67944d376d3$6994C976BE454E00976965079714521F.doc www.leica-geosystems.com Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/7/2023 To whom it may concern: We, Leica Geosystems AG, hereby certify that the equipment for which authorization is sought (FCC ID: RFD-GR50W) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature Hannes Juen Director Global Quality Engineering Leica Geosystems AG 62_ GR50W CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02
Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Phone +41 71 727 31 31 $894ca2b51d81$652A6B8D34FC4938A72AAE89CD850D40.doc www.leica-geosystems.com Date: 2023-08-07 Federal Communication Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Statement of re-use of original test results of approved radio modules according to KDB 996369 D02 Module Q and A v01 Q1(a) Reference of new FCC ID application: Applicant: Leica Geosystems AG FCC ID: RFD-GR50W We, the undersigned, hereby declare that our radio device hosts the following approved radio module(s) Grantee: UBLOX (XPY) Type of Module: WLAN (Wi-Fi 802.11b/g/n) FCC ID: XPYNINAW13 Report Reference NINA-W10 FCC-IC WLAN Report F170297E6.pdf, Phoenix Testlab: 170297E6 Grantee: Type of Module: FCC ID: Report Reference The module(s) is/are installed according to the installation instructions of the module manufacturer(s) without modification. The original module test report(s) accurately represent all conducted measured test results under the new conditions. All radiated measurements according to the applicable radio standard(s), the rf-exposure and simultaneous transmission evaluation are performed and reported for the entire host. Sincerely, Signature Hannes Juen Director Global Quality Engineering Leica Geosystems AG
Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Phone +41 71 727 31 31 www.leica-geosystems.com The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. $ac3a8f975dbe$EFCF193C160A4B71BD48FE3D023F88C1.docx Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/7/2023 U.S. Agent Designation Leica Geosystems AG acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: RFD-GR50W): Michael Harvey, Leica Geosystems, Inc 10035 Via Colomba Cir #205 Fort Myers, FL 33966, United States FRN: 0033715533 Tel.: (615) 585-0689 Email: [email protected] Leica Geosystems Inc acknowledges their obligation to accept service of process on behalf of Leica Geosystems AG. Leica Geosystems AG with the FRN 0009479130 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Hannes Juen Director Global Quality Engineering Leica Geosystems AG Signature Michael Harvey Sr. Product Manager – Reality Capture / S&E Leica Geosystems Inc.