RFR-BRSIBluetooth Module

Stollmann E + V GmbH BlueRS+I DesignGuide Author: clDate of Saving: 19.03.04Ref:Revision: 1.2Page 1 of 22 BlueRS+I DesignGuide Stollmann E + V GmbH BlueRS+I DesignGuide Author: clDate of Saving: 19.03.04Ref:Revision: 1.2Page 2 of 22 Content 1Objective ............................................................................................................. 4 2Product Description ............................................................................................ 4 2.1 Product Versions ............................................................................................. 4 2.1.1 Power Supply ........................................................................................... 4 2.2 Operation Modes............................................................................................. 4 2.2.1 AT-Mode .................................................................................................. 4 2.2.2 Autoconnect ............................................................................................. 4 2.2.3 Autoconnect DTR..................................................................................... 4 2.3 Security ........................................................................................................... 5 2.4 Block Diagram ................................................................................................. 5 3Applications ........................................................................................................ 6 3.1 Cable Replacement Serial Point-to-point ........................................................ 6 3.2 Cable Replacement Multipoint ........................................................................ 6 3.3 LAN Access..................................................................................................... 7 Terminal Server ...................................................................................................... 7 3.5 PC Client ......................................................................................................... 7 4Software Interfaces ............................................................................................. 8 4.1 AT Commands ................................................................................................ 8 4.1.1 Configuration Commands ........................................................................ 8 4.1.2 Connection Commands............................................................................ 8 4.2 Autoconnect .................................................................................................... 9 4.3 Security ........................................................................................................... 9 5Hardware .......................................................................................................... 10 5.1 Dimensions.................................................................................................... 10 5.2 Interfaces, Pin Assignment............................................................................ 11 5.2.1 Serial Interface ....................................................................................... 11 5.2.2 Connector P1 ......................................................................................... 12 5.2.3 Bluetooth Interface ................................................................................. 14 5.3 Sample interfacing GPIO............................................................................... 14 Stollmann E + V GmbH BlueRS+I DesignGuide Author: clDate of Saving: 19.03.04Ref:Revision: 1.2Page 3 of 22 5.4 Layout Guidelines Basic board, Components Requirements........................ 14 5.5 Power Supply ................................................................................................ 15 5.6 Power consumption and power down modes................................................ 15 5.6.1 Deep Sleep state.................................................................................... 15 5.6.2 Power down state................................................................................... 15 5.6.3 Idle state ................................................................................................ 16 5.6.4 Power consumption................................................................................ 16 5.6.5 Power-up time ........................................................................................ 16 6Mounting instructions ........................................................................................ 17 6.1 Antenna Issues ............................................................................................. 17 6.2 Housing Guidelines ....................................................................................... 18 7Regulatory Information...................................................................................... 19 7.1 FCC Statement.............................................................................................. 19 7.2 Caution .......................................................................................................... 19 7.3 FCC Warning................................................................................................. 19 7.4 RF-exposure Statement ................................................................................ 20 7.5 Labeling requirements for the End Product................................................... 20 8Test ................................................................................................................... 21 8.1 Test Setup ..................................................................................................... 21 8.2 Compatible Remote Stations......................................................................... 22 9Variants of Delivery..........................................................................…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 March 22, 2004 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Company requests confidentiality for the following products: FCC ID Number Product Title/Model RFR-BRSIBlueRS+I For the product stated above, we request that the following information be held confidential: 1.Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: "schematics”. 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “blockdiagram”. 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: “operational description” The above exhibits contain Company trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name:Jens Jensen Company:Stollmann E+V GmbH Address:Mendelssohnstr. 15, 22761 Hamburg, Germany Phone:++49.40.89088.498 Email:[email protected]

Stollmann E+V GmbH, Mendelssohnstr. 15, D-22761 Hamburg, GermanyPage 1 of 1 Tel: ++49-40-890 88-0, Fax: ++49-40-890 88-444, http://www.stollmann.de Dear Gerald, Stollmann Bluetooth Adapter BlueRS+I FCC ID: RFR-BRSI We would like to approve the above product as a limited modular approval specific to FCC Public Notice DA 00-1407, released June 26, 2000, titled Part 15 Unlicensed Modular Transmitter Approval for low power transmitter modules, here a Class 2 Bluetooth Adapter with typ. 0dBm output power. The requirements of the Public Notice DA 00-1407 are met as follows: 1. The module has no own RF shielding. Therefore we apply for a Limited Modular Approval (LMA), constrained to be sold to OEM manufacturers only. This product is designed for being built into measurement devices or machine control devices enabling OEM’s to offer Bluetooth functionality for their products. The interface is working on TTL level and the connector is only made for being mounted on a PCB. Therefore this product cannot be used by end users. There is no user manual, but a Design Guide available, which instructs the OEM how to use this module such that compliance of the end product is always ensured. 2. The BlueRS+I has buffered data inputs, since the complete Bluetooth protocol stacks is implemented on the BlueRS+I 3. The BlueRS+I has it’s own voltage regulator 4. A Hirose unique antenna connector or an internal antenna is used. The Design Guide gives exact instructions on how to implement an internal or external antenna. 5. The EUT was tested in a standalone type configuration as can be seen on page 62 of the CETECOM Test Report No. 2-3068-3-3/02 on page 62 of 69. It was mounted on a PCB called base board. Placed on the base board are only level shifters for translating the serial TTL signals to RS232 level, so that a connection to a PC COM port could be made, and further a connector for a mains plug adaptor for having supply. There was no RF shielding at all necessary to be conform to the FCC part 15 requirements. 6. An exhibit label (including FCC ID) has been included in the Design Guide and the OEM manufacturer has been instructed on how to label the end product. 7. The BlueRS+I is compliant with all applicable FCC rules. Instructions for maintaining compliance are given in the Design Guide. 8. The BlueRS+I is compliant with all applicable RF exposure requirements for modular transmitter devices. OEM manufactures are given instructions in the Design Guide for maintaining compliance to RF exposure requirements. Yours faithfully Jens Jensen Manager of Compliance Engineering

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 68 of 69 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 69 of 69

Stollmann BlueRS+I FCCID: RFR-BRSI 5 mm IC: 4957A-BRSI 10 mm Label location can be explained by viewing BlueRS+I photo in CETECOM Test Report No.: 2-3068-3-3/02 on page 69. This foto shows PCB bottom side. The label will be located in the copper free area between the 2 mountig holes. The label shown in "RS+I_component_2_FCC.pdf" is MS Word version. Printed labels will be reworked by layouter and therefore have better contrast and resolution. Stollmann BlueRS+E BDA : 008025FFABCD Made in Germany20 mm This device contains transmitter with FCCID: RFR-BRSI / IC: 4957A-BRSI 30 mm Label will be located like shown in CETECOM Test Report No.: 2-3068-3-3/02 on page 67. The label shown in "RS+E_housing_FCC_label.pdf" is MS Word version. Printed labels will be reworked by layouter and therefore have better contrast and resolution.

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 68 of 69 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 69 of 69

G:\2_RSC\PROJEKTE\02\3068_3 Stollmann Ge\Erge\Task 3 FCC Warken\2-3068-3-1-02 FCC Part 15.247.doc Recognized by the Federal Communications Commission FCC–Identification Number: 90462 TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number TTI–P–G 166/98 Independent ETSI compliance test house ETSI Accredited Bluetooth™ Test Facility (BQTF) Test report no.: 2-3068-3-3/02 FCC Part 15.247 / CANADA RSS-210 FCC ID: Blue RS+E/I CETECOM – ICT Services GmbH Untertürkheimerstr. 6-10 D-66117 Saarbrücken, Germany Telephone: + 49 (0) 681 / 598-0 Fax: + 49 (0) 681 / 9075 BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to Cetecom SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 2 of 69 Table of contents 1.ADMINISTRATIVE DATA.......................................................................................................................................................3 1.1.ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................................3 1.1.1Identification of the testing laboratory...........................................................................................................................3 1.1.2Organizational items..........................................................................................................................................................3 1.1.3Applicant ́s details..............................................................................................................................................................4 1.2ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER...................................................................................................4 1.3DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT)......................................................................................................5 1.3.1EUT: Type, S/N etc.............................................................................................................................................................5 1.3.2If RF component testing only, describtion of additional used HW/SW.....................................................................5 1.3.3Additional EUT information.............................................................................................................................................5 1.3.4EUT operating modes........................................................................................................................................................6 1.3.5Extreme conditions testing values...................................................................................................................................6 2.TESTSTANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES.....................................................7 3.RF MEASUREMENT TESTING..............................................................................................................................................8 3.1DESCRIPTION OF TEST SET-UP................................................................................................................................................8 3.1.1Radiated measurements.....................................................................................................................................................8 3.1.2Conducted measurements.................................................................................................................................................8 3.3 ADDITIONAL COMMENTS........................................................................................................................................................9 3.4ANTENNA GAIN........................................................................................................................................................................9 3.5CARRIER FREQUENCY SEPARATION §15.247(A1)..............................................................................................................10 3.6 NUMBER OF HOPPING CHANNELS §15.247(A1)..................................................................................................................11 3.7TIME OF OCCUPANCY (DWELL TIME) §15.247(A1 III)......................................................................................................12 3.8 POWER SPECTRAL DENSITY (HYBRID SYSTEM IN INQUIRY MODE/PAGE SCAN) §15.247(D)......................................13 3.9SPECTRUM BANDWIDTH OF A FHSS SYSTEM / 20DB BANDWITH §15.247(A1)..........................................................14 2.10MAXIMUM OUTPUT POWER (CONDUCTED) § 15.247 (B) (1)............................................................................................17 3.11MAX. PEAK OUTPUT POWER (RADIATED) § 15.247 (B) (1)..............................................................................................21 3.12BAND-EDGE COMPLIANCE OF CONDUCTED EMISSIONS §15.247 (C)...............................................................................22 3.13BAND-EDGE COMPLIANCE OF RADIATED EMISSIONS §15.205.........................................................................................26 3.14SPURIOUS EMISSION -CONDUCTED (TRANSMITTER) § 15.247 (C) (1)...........................................................................31 3.15SPURIOUS EMISSION -RADIATED (TRANSMITTER) § 15.247 (C) (1)...............................................................................35 3.16SPURIOUS EMISSIONS-RADIATED (RECEIVER) § 15.109..................................................................................................51 3.17SPURIOUS EMISSIONS-RADIATED <30 MHZ § 15.109......................................................................................................55 3.18CONDUCTED EMISSIONS <30 MHZ § 15.107/207..................................................................…

Text truncated - open the document above for the full version.

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 62 of 69 4 Photographs Testsetup: SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 64 of 69 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 2-3068-3-3/02Date: 2003-05-06Page 65 of 69