RGE-COMIGODUOOTTIP Set Top Box

Comigo Duo Quick User Guide What’s in the box? Remote Control (including batteries and a plastic tab) HDMI cableEthernet cable Power adapter Comigo Duo 2 3 Setting up your system HDMI cable:Connect the HDMI cable to Comigo Duo and to your TVEthernet cable:If you use a wired network, connect the cable to the Comigo Duo and to your router.If you use a wireless network you will be able to set it up during the welcome process (see page 12). Power adapter:Connect the power adapter to your Comigo Duo and to the wall outlet ! Important: the power adapter is the last one to be connected (it should be plugged-in only after the HDMI and the Ethernet cables are plugged-in) Comigo Duo Using a 3.0mm Ň at head screw driver, insert it into the ba Ʃ ery lid slot Step : 1 Prepare the remote control:Remove the plastic tab to enable battery contact before using your remote control for the first time 4 5 Remote control navigation buttonscontent informationdashboard of your favorite activitiesuser login socialize with your friends mouse on/off change the channel aspect ratio system menu system information letters / other charactersspecial letters Control Side Keyboard Side Comigo Duo STBY last TV channel 6 7 Completing the setup:1. Turn on your TV, make sure it’s tuned to the same HDMI in put your Comigo Duo is connected to 2. You will either see a “Welcome” screen, or a Comigo logo screen (if so, please wait about one minute for a “Welcome” screen to appear) 3. Continue following the on-screen instructions and you wil l be able to: œ Set up your internet connection œ Adjust screen size to your TV * Note: During the initial setup the Comigo Duo wil l reset itself. 4. At this stage, information and system-introduction screens will appear 5. Choose your Comigo Duo name 6. Login to your Facebook account. If you don’t have a Facebo ok account, press “Skip”. We recommend you to login later on, to enjoy the unique social and interactive features and capabilities of your Comigo Duo. Having trouble completing the guided setup? Check out pages 12-13 Congratulations – you are now connected! Pressing the Up/Down arrows on the 4-way navigation keys of the Remote Control will allow you to view the list of ava ilable channels 8 9 Learn more about Comigo Duoœ Access Multimedia files residing on the wireless home network or on a hard drive connected to your Comigo Duo: whether it’s music, photos or personal content œ Browse the web and enjoy the wide variety of internet based content œ Access the VOD library œ Access Online Videos to watch videos which were shared by your friends in Facebook œ Explore and search for friends or content and other items, whether in your personal files, VOD catalogue or in specific pre-defined websites œ Control your network settings, user profiles, privacy settings and more œ Enjoy some Android Apps Please note: Comigo Duo features are constantly being enhanced and enriched. Therefore, you will always be able to enjoy our new various features and capabilities as will be released from time to time.All you have to do is just keep your Comigo Duo plugged in and connected to the internet so that it can download the latest software updates automatically. 10 11 Troubleshooting on the “Network connection” screen 5. If your network has security-enabled then make sure you input the correct password (case-sensitive) œ Changing the remote control batteries:When the batteries are low, replace it with another CR2032 batteries œ Cannot connect to your wireless home network during the setu p? 1. For Wi-Fi operation you need to ensure that you have at least the minimum required signal strength.If you are not getting 2 or more signal-strength bars in the“wireless network” setup screen, then adjust the location of your Comigo Duo and/or the location of your wireless router 2. Make sure there are no obstructions, like cement walls, between your Comigo Duo and your wireless router 3. Make sure you select “Wireless” and not “Ethernet” on the “Network connection” screen 4. Make sure you select the correct wireless router name œ Black screen? Your TV does not display a Comigo screen?Make sure your TV input source matches the physical connection used to connect your Comigo Duo. Press the Input selection button (also called Source) on your TV or TV Remote to cycle through the various video inputs until you see a Comigo screen. œ You cannot see a picture on your TV? 1. Make sure your TV is turned on 2. Make sure all connectors are pushed in properly 3. Make sure that the Comigo Duo is connected to the power and turned on (front panel LED should be green) Push toward the remote to open the Battery Lid Step : 2 Using a 3.0mm flat head screw driver, insert it into the battery lid slot Step : 1 12 13 FCC part 15.21:Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC part 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate r adio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, w hich can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: œ Reorient or relocate the receiving antenna. œ Increase the separation between the equipment and receiver. œ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. œ Consult the de…

Text truncated - open the document above for the full version.

ACX Advanced Ceramic X AT7020 Series Multilayer Chip Antenna Features ™ Monolithic SMD with small, low-profile and light-weight type. ™ Wide bandwidth Applications ™2.4GHz WLAN, Home RF, Bluetooth Modules, etc. Specifications Part Number Frequency Range (MHz) Peak Gain (dBi typ.) Average Gain (dBi typ.) VSWR Impedance AT7020 -E3R0HBA_ 2400~2500 1.3dBi (XZ-V)-0.5dBi (XZ-V)2 max. 50 Ω Q’ty/Reel (pcs) : 1,000 pcs Operating Temperature Range : -40 ~ +85 o C Storage Temperature Range : -40 ~ +85 o C Power Capacity : 3W max. Part Number AT c 7020 - E 3R0 HBA ‡ ‡ i ghfe d c Type AT : Antenna d Dimensions ( L × W ) 7.0× 2.0 mm e Material Code E f Frequency Range 3R0=3000MHz g Specification Code HBA h Packaging T: Tape & Reel B: Bulk i Soldering =lead-containing /LF=lead-free Terminal Configuration f A C X e No. Terminal Name No. Terminal Name c Feeding Point e NC d NC f NC d c ACX Advanced Ceramic X Dimensions and Recommended PC Board Pattern Unit : mm L A C X Top view a L1 Bottom view W T Side view W1 Mark L W L1 W1 T a Dimensions 7.00.2 2.00.2 2.60.2 0.50.2 2.0+ 0.1/-0.2 0.50.3 ™With Matching Circuits (Unit in mm) 0.83 2.8 1 1.6 1.6 1 0.8 1.83 0.8 1 2 2 2 4.87 2.7 nH A C X 1.8 nH 10 (Matching circuit and component values will be different, depending on PCB layout) *Line width should be designed to match 50Ω characteristic impedance, depending on PCB material and thickness. ACX Advanced Ceramic X Typical Electrical Characteristics (T=25 o C) ™ Test Board (Unit in mm) 4.87 1 0 Antenna No Ground Ground 20 40 ™Return Loss/With Matching Circuits ACX Advanced Ceramic X ™Radiation Patterns XZ cut @2.45GHz Vertical Horizontal YZ cut @2.45GHz Vertical Horizontal XZ-V/XZ-H YZ-V/YZ-H XY cut @2.45GHz Vertical Horizontal Z 270 o 0 o X Y XY-cut scanning direction Y 270 o 0 o X Z XZ-cut scanning direction Z X 0 o 270 Y YZ-cut scanning direction 180 180 180 o XY-V/XY-H 90 o 90 o 90 o ACX Advanced Ceramic X AT7020-E3R0HBA on mobile phone layout ™Evaluation board (Unit in mm) Via Ground 100 40 2 5 1.5 nH No ground 9 Antenna 3.3 nH ™Return Loss/With Matching Circuits ACX Advanced Ceramic X ™Radiation Patterns XZ cut @2.45GHz Vertical Horizontal YZ cut @2.45GHz Vertical Horizontal XZ-V/XZ-H YZ-V/YZ-H XY cut @2.45GHz Vertical Horizontal Z 270 o 0 o X Y XY-cut scanning direction Y 270 o 0 o X Z XZ-cut scanning direction Z X 0 o 270 Y YZ-cut scanning direction 180 180 180 o XY-V/XY-H 90 o 90 o 90 o Advanced Ceramic X Corp. 16 Tzu Chiang Road, Hsinchu Industrial District Hsinchu Hsien 303, Taiwan TEL:886-3-5987008 FAX:886-3-5987001 E-mail: [email protected] http://www.acxc.com.tw

-1 of 5- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EXTERNAL PHOTOGRAPHS OF EUT -2 of 5- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EUT 1 EUT 2 -3 of 5- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EUT 3 EUT 4 -4 of 5- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EUT 5 EUT 6 -5 of 5- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EUT 7 EUT 8

Label location: Label:

-1 of 4- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC INTERNAL PHOTOGRAPHS OF EUT -2 of 4- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EUT 1 EUT 2 Antenna -3 of 4- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EUT 3 EUT 4 -4 of 4- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC EUT 5

-1 of 2- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC 1 Maximum Permissible Exposure (MPE) 1.1 Standard Applicable According to §1.1307(b)(1), systems operating under the provisions of this section shall be op- erated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Mobile device, the MPE is required. According to §1.1310 and §2.1091 RF exposure is calculated. Limits for Maximum Permissive Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-15000 / / 1.0 30 F = frequency in MHz * = Plane-wave equipment power density -2 of 2- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC 1.2 Maximum Permissible Exposure (MPE) Evaluation The worst case of Average power: refer to section 6.5 for detail measurement date. 802.11b (2.4G) Cable loss = 0 Output Power Limit CH Frequency (MHz) Detector (dBm) PK AV (dBm) (dBm) 1 2412 16.53 14.48 30 6 2437 16.69 14.31 11 2462 16.57 14.59 MPE Prediction (802.11n 20MHz) Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR 2 Where: S = Power density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Maximum Average output power at antenna input terminal: 14.59 (dBm) Maximum Averger output power at antenna input terminal: 28.77398415 (mW) Duty cycle: 99 (%) Maximum Pav : 28.48624431 (mW) Antenna gain (typical): 1.3 (dBi) Maximum antenna gain: 1.348962883 (numeric) Prediction distance: 20 (cm) Prediction frequency: 2462 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm2) Power density at predication frequency at 20 (cm) distance 0.0076487 (mW/cm^2) Measurement Result The predicted power density level at 20 cm is 0.0076mW/cm 2 . This is below the uncontrolled exposure limit of 1 mW/cm 2 at 2462MHz.

Page: 1 of 93 TEST REPORT of FCC Part 15 Subpart C New Application; Class I PC; Class II PC Product : IP Set Top Box Brand: COMIGO Model: CMG-SBOF8C; Model Difference: N/A FCC ID: RGE-COMIGODUOOTT FCC Rule Part: §15.247, Cat: DTS Applicant: Comigo Ltd. Address: 15 HaPardes St., Yarkona 45915, Israel Test Performed by: International Standards Laboratory <Lung-Tan LAB> *Site Registration No. BSMI: SL2-IN-E-0013; MRA TW1036; TAF: 0997; IC: IC4067B-3; *Address: No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan *Tel : 886-3-407-1718; Fax: 886-3-407-1738 Report No.: ISL-13LR159FC Issue Date : 2013/09/13 Test results given in this report apply only to the specific sample(s) tested and are traceable to nation- al or international standard through calibration of the equipment and evaluating measurement uncertainty herein. This report MUST not be used to claim product en- dorsement by TAF, NVLAP or any agency of the Government. This test report shall not be reproduced except in full, without the written approval of International Standards Laboratory. -2 of 93- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC VERIFICATION OF COMPLIANCE Applicant: Comigo Ltd. Product Description: IP Set Top Box Brand Name: COMIGO Model No.: CMG-SBOF8C; Model Difference: N/A FCC ID: RGE-COMIGODUOOTT Date of test: 2013/09/06 ~ 2013/09/10 Date of EUT Received: 2013/08/29 We hereby certify that: All the tests in this report have been performed and recorded in accordance with the standards de- scribed above and performed by an independent electromagnetic compatibility consultant, Interna- tional Standards Laboratory. The test results contained in this report accurately represent the measurements of the characteristics and the energy generated by sample equipment under test at the time of the test. The sample equip- ment tested as described in this report is in compliance with the limits of above standards. Test By: Date: 2013/09/13 Dino Chen / Engineer Prepared By: Date: 2013/09/13 George Lo / Assistant Manager Approved By: Date: 2013/09/13 Vincent Su / Technical Manager -3 of 93- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC Version Version No. Date Description 00 2013/09/13 Initial creation of document -4 of 93- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC Table of Contents 1 GENERAL INFORMATION .................................................................................................... 6 1.1 Related Submittal(s) / Grant (s) ..................................................................................................... 7 1.2 Test Methodology .......................................................................................................................... 7 1.3 Test Facility .................................................................................................................................... 7 1.4 Special Accessories ........................................................................................................................ 7 1.5 Equipment Modifications ............................................................................................................... 7 2 SYSTEM TEST CONFIGURATION ....................................................................................... 8 2.1 EUT Configuration ........................................................................................................................ 8 2.2 EUT Exercise ................................................................................................................................. 8 2.3 Test Procedure ................................................................................................................................ 8 2.4 Configuration of Tested System ..................................................................................................... 9 3 SUMMARY OF TEST RESULTS .......................................................................................... 10 4 DESCRIPTION OF TEST MODES ....................................................................................... 10 5 CONDUCTED EMISSION TEST .......................................................................................... 11 5.1 Standard Applicable: .................................................................................................................... 11 5.2 Measurement Equipment Used: ................................................................................................... 11 5.3 EUT Setup: ................................................................................................................................... 11 5.4 Measurement Procedure:.............................................................................................................. 12 5.5 Measurement Result: ................................................................................................................... 12 6 PEAK /AVERAGE OUTPUT POWER MEASUREMENT................................................. 15 6.1 Standard Applicable: .................................................................................................................... 15 6.2 Measurement Equipment Used: ................................................................................................... 16 6.3 Test Set-up: .................................................................................................................................. 16 6.4 Measurement Procedure:.............................................................................................................. 16 6.5 Measurement Result: ................................................................................................................... 17 7 6dB Bandwidth(EBW) ...............................................................................................…

Text truncated - open the document above for the full version.

-1 of 3- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC PHOTOGRAPHS OF SET UP -2 of 3- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC Radiated Emission Set up Photo -3 of 3- FCC ID: RGE-COMIGODUOOTT International Standards Laboratory Report Number: ISL-13LR159FC Conducted Emission Set up Photo