RGPGUELNeoVoice USB Bluetooth Wireless Headset

Southwing S.L.

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Dec 06, 2003
Application Purpose: Original Equipment
Date of Application: Dec 06, 2003
Equipment Note: NeoVoice USB Bluetooth Wireless Headset
Frequency Range: 2402.00000000 - 2480.00000000
Company: Southwing S.L.
Country: Spain

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Nederlands Dansk Español Deutsch Français Italiano Norsk Português Suomi Svenska English User Guide Bluetooth ® Wireless Headset USB English Manual V2.qxd 20/11/2003 12:39 PÆgina 1 Index Introduction .....................................................................3 What is Bluetooth ® ? .......................................................4 First steps .........................................................................5 Charging .......................................................5 Pairing ...........................................................6 Wearing the Headset ......................................................7 General Usage .................................................................7 Resetting your Headset ................................................10 Advanced Features in Hands-free mode ..................11 Troubleshooting ............................................................12 Additional Information ...............................................13 Declaration of Conformity .........................................16 Commands Summary Table ........................................18 Note:Please read the "Safe usage guidelines" on page 13 and "Warranty" on page 14 before using the Headset. English User Guide Bluetooth ® Wireless Headset USB English Manual V2.qxd 20/11/2003 12:39 PÆgina 2 Introduction Thank you for choosing to buy a Bluetooth ® (*) SouthWing Headset. We hope you enjoy using it as much as we did developing it. This User Guide provides all the information you will need on how to use and look after your product. * Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and licensed to SouthWing. SouthWing SouthWing was founded in December 2000 and is headquartered in Barcelona, Spain. Our experienced team is focused on developing the future generation of wireless headsets. Should you wish to learn more about the company, please visit our web site at: www.south-wing.com If you have any comments or suggestions on this or any other SouthWing product, we would love to hear from you. Introduction 3 English Manual V2.qxd 20/11/2003 12:39 PÆgina 3 4 What is Bluetooth ? What is Bluetooth ? Bluetooth is a short-range cord replacement techno- logy that allows the seamless interconnection of many different devices such as mobile phones, portable com- puting devices, and mobile phone headsets without the complication of cables. Industry collaboration has meant that Bluetooth has become a highly interoperable, affordable, and widely deployed wireless connectivity standard. What do I need? As this Headset is a qualified Bluetooth product sup- porting the Bluetooth Headset and Bluetooth Hands- free profiles, it can connect to any other qualified Bluetooth product supporting at least one of these profiles. Today, nearly every mobile phone with inte- grated Bluetooth supports one or both of these profi- les. As a Bluetooth mobile phone will most commonly be used with your Bluetooth Headset, references to a mobile phone are used throughout this User Guide. ® ® English Manual V2.qxd 20/11/2003 12:39 PÆgina 4 First Steps When you first receive your SouthWing Bluetooth Wireless Headset you will need to charge the battery and pair the Headset to your mobile phone. Charging (Fig.-2: Charging) Your Bluetooth Headset has an internal rechargeable battery and USB Charging Socket. To charge this bat- tery, follow these steps:CAUTION! 1. Always first plug the connector of the power supply into the USB Charging socket [6] Headset ( Fig.-1: Overview- Headset), with the arrow facing down (Drawing B), that is, never with the arrow facing up ( Drawing A). Make sure that the connector enters smoothly. 2. Plug the power supply into a power point. 3. The Headset Indicator Light will turn green to indicate the Headset battery is charging. 4. Once the Headset Indicator Light turns off, the Headset is fully charged and can be removed from the power supply. Please Note: - If the Headset Indicator Light [ 2 ] remains off when you plug the power supply into the Headset, the bat- tery is already fully charged and does not require fur- ther charging. - Thanks to its USB charging facility, the Headset bat- tery can alternatively be charged from any USB port, such as those found on a PC or laptop. The SouthWing USB cable adaptor accessory is required (www.south-wing.com) - To maximise battery life, do not leave the power supply plugged into the Headset for extended periods of time. - Full battery capacity will be achieved after two or three full charge/discharge cycles. First Steps 5 Drawing A Drawing B WRONG RIGHT English Manual V2.qxd 20/11/2003 12:39 PÆgina 5 6 First Steps Pairing Before using your Headset you will need to pair it to your Bluetooth mobile phone. You will need to repeat this process if you want to use your Headset with ano- ther mobile phone. Pairing is a feature of your Bluetooth Headset that prevents anyone else eaves- dropping on your phone conversations. This product supports both the Headset and Hands-free profiles, which ensures compatibility with a larger number of Bluetooth mobile phone models. The addition of the Hands-free profile offers access to a wider range of phone functions. 1. Ensure the Headset is off(see below on how to turn your headset on and off) and that the mobile phone with which you wish to pair is not too far apart (less than 1 meter of separation will ensure most reliable pairing). 2. Put the mobile phone into pairing mode (see the instruc- tions which came with your phone). 3. Press and hold the Multi-function Dial [1] for about 5 seconds until the Headset Indicator Light [2] alternates between red and green (you will also hear a series of high tones). Now the Headset is ready for pairing in Headset mode. 4. If your mobile phone supports the Hands-free mode, just briefly push once again the Multi-function Dial and the Headset will attempt pairing in Hands-free mode (you will hear a series of low tones). Briefly…

Text truncated - open the document above for the full version.

Cover Letter(s)

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 November 28, 2003 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552 (b)(4) of the Freedom of Information Act, SouthWing, S.L. requests confidentiality for the following products: FCC ID Number Product Title/Model RGPGUEL Bluetooth Wireless Heaset/Neo-102 For the product stated above, we request that the following information be held confidential: 1) Electrical Schematics of the Circuitry 2) Block Diagram 3) Part Lists 4) Operational Description No other items submitted as part of the equipment authorization filing process are deemed confidentia l. The above exhibits contain SouthWing, S.L. trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our wireless headset. This material is not customarily available to the general public and we request that it be withheld request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, P.A. Mr. Sergi Torrents Business Development Manager SouthWing, S.L. C/ Llacuna, 162. Edificio Barcelona Activa. 08018 - Barcelona, SPAIN TEL: +34 934019757 E-mail: [email protected]

Cover Letter(s)

ID Label/Location Info

! " #$%&&'( #$%&&'( )*!)*!) % ! $ + , , - . &

ID Label/Location Info

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 November 28, 2003 RE: 15.19 Statement (FCC ID: RGPGUEL) TO WHOM IT MAY CONCERN The statement: "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation” Is not placed in the label of the equipment due to the following reasons: - Type label is too small (No room for this writing). - Required text is already included in the user guide This statement is placed in a prominent location in the instruction manual. Please contact me if there is any information you may need. If you have any questions, please feel free to contact me at the address shown below. Sincerely, P.A. Mr. Sergi Torrents Business Development Manager SouthWing, S.L. C/ Llacuna, 162. Edificio Barcelona Activa. 08018 - Barcelona (SPAIN) TEL: +34 934019757 E-mail: [email protected]

RF Exposure Info

attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 November 28, 2003 RE: RF exposure information FCC ID: RGPGUEL FCC ID Number Product Title/Model RGPGUEL Bluetooth Wireless Headset/Neo-102 TO WHOM IT MAY CONCERN The product stated above, comply with the FCC limits for Human exposure to RF emissions. This device is categorically excluded from routine environmental because it operate at very low power level. The equipment is deemed to comply with the SAR or MPE limits without testing due to this very low power level (EIRP < 2.5 mW) Sincerely, P.A. Mr. Sergi Torrents Business Development Manager SouthWing, S.L. C/ Llacuna, 162. Edificio Barcelona Activa. 08018 - Barcelona, SPAIN TEL: +34 934019757 E-mail: [email protected]

Test Report

Report No.: 18878RET.101 Date: 2003-12-02 Page: 2 of 8 FDT08_04 INDEX 1. COMPETENCE AND GUARANTEES ........................................................................................... 3 2. GENERAL CONDITIONS ............................................................................................................... 3 3. CHARACTERISTICS OF THE TEST ............................................................................................. 3 3.1 TEST REQUESTED.................................................................................................................. 3 3.2 REQUIREMENTS AND METHOD ......................................................................................... 3 4. IDENTIFICATION DATA SUPPLIED BY THE APPLICANT ..................................................... 5 4.1 APPLICANT.............................................................................................................................. 5 4.2 REPRESENTATIVE ................................................................................................................. 5 4.3 TEST SAMPLES SUPPLIER.................................................................................................... 5 4.4 IDENTIFICATION OF ITEM/ITEMS TESTED ...................................................................... 5 5. USAGE OF SAMPLES, PERIOD OF TESTING AND ENVIRONMENTAL CONDITIONS ...... 6 5.1 USAGE OF SAMPLES ............................................................................................................. 6 5.2 PERIOD OF TESTING.............................................................................................................. 6 5.3 ENVIROMENTAL CONDITIONS........................................................................................... 6 6. TEST RESULTS............................................................................................................................... 8 7. REMARKS AND COMMENTS ...................................................................................................... 8 8. SUMMARY ...................................................................................................................................... 8 ANNEXES ANNEX A. TEST RESULTS ANNEX B. PHOTOGRAPHS Report No.: 18878RET.101 Date: 2003-12-02 Page: 3 of 8 FDT08_04 1. COMPETENCE AND GUARANTEES Centro de Tecnología de las Comunicaciones (CETECOM), S.A. is a laboratory with a measurement facility in compliance with the requirements of Section 2.948 of the FCC rules and has been added to the list of facilities whose measurements data will be accepted in conjuction with applications for Certification under Parts 15 or 18 of the Commission's Rules. Registration Number: 905266. In order to assure the traceability to other national and international laboratories, CETECOM has a calibration and maintenance programme for its measuring equipment. CETECOM guarantees the reliability of the data presented in this report, which is the result of measurements and tests performed to the item under test on the date and under the conditions stated on the report and is based on the knowledge and technical facilities available at CETECOM at the time of execution of the test. CETECOM is liable to the client for the maintenance by its personnel of the confidentiality of all information related to the item under test and the results of the test. 2. GENERAL CONDITIONS 1. This report only refers to the item that has undergone the test. 2. This report does not constitute or imply by its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without written approval of CETECOM. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of CETECOM and the Accreditation Bodies. 3. CHARACTERISTICS OF THE TEST 3.1 TEST REQUESTED Measurements for frequency hopping spread spectrum equipment (Bluetooth) operating in the 2400 MHz -2483.5 MHz band and using, according to FCC Part 15.247. 3.2 REQUIREMENTS AND METHOD The test has been carried out according to FCC parts 15.33, 15.35, 15.109, 15.205, 15.209, 15.247 and the document DA 00-705:"Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems". The testing was performed according to the procedure in ANSI C63.4 (1992). Radiated testing was performed in Cetecom's semi-anechoic chamber. This site has been fully described in a report submitted to the FCC and was accepted in a letter dated July 25, 2002. Report No.: 18878RET.101 Date: 2003-12-02 Page: 4 of 8 FDT08_04 The instrumentation used to perform the testing is listed below: 1. Semianechoic Absorber Lined Chamber IR 11. BS. 2. Control Chamber IR 12.BC. 3. Spectrum Analyzer HP 8566 B. 4. RF Preselector HP 85685A. 5. Quasi-peak adaptor HP 85650A. 6. RF linear amplifier HP 8447.F 7. Antenna mast EM 1072 NMT. 8. Rotating table EM 1084-4. ON. 9. Mast controller EM 1053-22. 10. Rotating table controller EM 1064-4023. 11. Process controller HP 98581C. 12. Harddisk HP 9153. 13. Peripheral unit HP 9153 C. 14. Measurement software HP 85879A. 15. 3 dB attenuator HP 8491A. 16. Bilog antenna CHASE CBL6111. 17. Bilog antenna CHASE CBL6111. 18. Antenna tripod EMCO 11968C. 19. Double-ridge Guide Horn antenna 1-18 GHz HP 11966E. 20. Double-ridge Guide Horn antenna 18-40 GHz Agilent 119665J. 21. Switch Unit with RF pre-amplifiers R&S TS8930SU. 22. RF pre-amplifier Miteq JS4-12002600-30-5A. 23. EMI Test Receiver R&S ESIB26. Report No.: 18878RET.101 Date: 2003-12-02 Page: 5 of 8 FDT08_04 4. IDENTIFICATION DATA SUPPLIED BY THE APPLICANT Identification data in this section has been supplied by the client. 4.1 APPLICANT Name or Company: SOUTHWING V.A.T.: B62634944 Address: c/ Llacuna, 162 BARCELONA Postal code: 08018 Country: SPAIN Telephone: +34 934019757 Fax: +34 934019623 4.2 REPRESENTATIVE Name: Sergi Torrent…

Text truncated - open the document above for the full version.

Test Report

Report No: 18878RET.101 Date: 2003-12-02 Page: 21 of 46 Annex A FET45_00.DOC PEAK OUTPUT POWER (RADIATED). Highest Channel: 2480 MHz. Report No: 18878RET.101 Date: 2003-12-02 Page: 22 of 46 Annex A FET45_00.DOC Section 15.247 Subclause (c). Band-edge of conducted emissions (Transmitter) SPECIFICATION Emissions outside the frequency band in which the intentional radiator is operating shall be at least 20dB below the highest level of the desired power. RESULTS: 1. LOW FREQUENCY SECTION 2402 MHz (HOPPING OFF). See next plot. Verdict: PASS Report No: 18878RET.101 Date: 2003-12-02 Page: 23 of 46 Annex A FET45_00.DOC 2. HIGH FREQUENCY SECTION 2480 MHz (HOPPING OFF). See next plot. Verdict: PASS Report No: 18878RET.101 Date: 2003-12-02 Page: 24 of 46 Annex A FET45_00.DOC 3. LOW FREQUENCY SECTION (HOPPING ON). See next plot. Verdict: PASS Report No: 18878RET.101 Date: 2003-12-02 Page: 25 of 46 Annex A FET45_00.DOC 4. HIGH FREQUENCY SECTION (HOPPING ON). See next plot. Verdict: PASS Report No: 18878RET.101 Date: 2003-12-02 Page: 26 of 46 Annex A FET45_00.DOC Section 15.247 Subclause (c). Emission limitations conducted (Transmitter) SPECIFICATION In any 100 kHz bandwidth outside the frequency band in which the intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power. RESULTS: 1. LOWEST CHANNEL (2402 MHz): 30 MHz-25 GHz (see next plot). Note: The peak above the limit is the carrier frequency. Verdict: PASS Report No: 18878RET.101 Date: 2003-12-02 Page: 27 of 46 Annex A FET45_00.DOC 2. MIDDLE CHANNEL (2441 MHz): 30 MHz-25 GHz (see next plot). Note: The peak above the limit is the carrier frequency. Verdict: PASS Report No: 18878RET.101 Date: 2003-12-02 Page: 28 of 46 Annex A FET45_00.DOC 3. HIGH CHANNEL (2480 MHz): 30 MHz-25 GHz (see next plot). Note: The peak above the limit is the carrier frequency. Verdict: PASS Report No: 18878RET.101 Date: 2003-12-02 Page: 29 of 46 Annex A FET45_00.DOC Section 15.247 Subclause (c). Emission limitations radiated (Transmitter) SPECIFICATION Radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)): Frequency Range (MHz) Field strength (μV/m) Field strength (dBμV/m) Measurement distance (m) 0.009-0.490 2400/F(kHz) - 300 0.490-1.705 24000/F(kHz) - 300 1.705 - 30.0 30 - 30 30 - 88 100 40 3 88 - 216 150 43.5 3 216 - 960 200 46 3 960 - 25000 500 54 3 The emission limits shown in the above table are based on measurements employing CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. For average radiated emission measurements above 1000 MHz, there is also a limit corresponding to 20 dB above the indicated values in the table is specified when measuring with peak detector function. RESULTS: The field strength is calculated by adding correction factor to the measured level from the spectrum analyzer. This correction factor includes antenna factor, cable loss and pre-amplifiers gain. The equipment transmits continuously in the selected channel so it is not necessary a duty cycle correction factor. Report No: 18878RET.101 Date: 2003-12-02 Page: 30 of 46 Annex A FET45_00.DOC 1. TRANSMITTER OPERATING IN CHANNEL: LOWEST (2402 MHz). Frequency range 30 MHz-1000 MHz. No spurious signals found. Frequency range 1 GHz-25 GHz. Spurious frequency (MHz) Polarization Detector Emission Level (dBμV/m) Measurement Uncertainty (dB) 1201.52101 Horizontal Peak 36.20 ±4.0 1201. 52101 Horizontal Average 34.66 ±4.0 No spurious signals found at the harmonics frequencies and inside the restricted bands 2310-2390 MHz and 2483.5-2500 MHz Verdict: PASS. 2. TRANSMITTER OPERATING IN CHANNEL: MIDDLE (2441 MHz). Frequency range 30 MHz-1000 MHz. No spurious signals found. Frequency range 1 GHz-25 GHz. Spurious frequency (MHz) Polarization Detector Emission Level (dBμV/m) Measurement Uncertainty (dB) 1220.84168 Horizontal Peak 37.48 ±4.0 1220.84168 Horizontal Average 35.81 ±4.0 No spurious signals found at the harmonics frequencies and inside the restricted bands 2310-2390 MHz and 2483.5-2500 MHz Verdict: PASS. Report No: 18878RET.101 Date: 2003-12-02 Page: 31 of 46 Annex A FET45_00.DOC 3. TRANSMITTER OPERATING IN CHANNEL: HIGHEST (2480 MHz). Frequency range 30 MHz-1000 MHz. No spurious signals found. Frequency range 1 GHz-25 GHz. Spurious frequency (MHz) Polarization Detector Emission Level (dBμV/m) Measurement Uncertainty (dB) 1239.87976 Horizontal Peak 37.69 ±4.0 1239.87976 Horizontal Average 36.53 ±4.0 No spurious signals found at the harmonics frequencies and inside the restricted bands 2310-2390 MHz and 2483.5-2500 MHz Verdict: PASS. Report No: 18878RET.101 Date: 2003-12-02 Page: 32 of 46 Annex A FET45_00.DOC FREQUENCY RANGE 30 MHz-1000 MHz. Resolution bandwidth = 100 kHz. Video bandwidith = 100 kHz. (This plot is valid for all three channels). Report No: 18878RET.101 Date: 2003-12-02 Page: 33 of 46 Annex A FET45_00.DOC FREQUENCY RANGE 1 GHz to 2.9 GHz. CHANNEL: Lowest (2402 MHz). Note: The peak above the limit is the carrier frequency. Report No: 18878RET.101 Date: 2003-12-02 Page: 34 of 46 Annex A FET45_00.DOC CHANNEL: Middle (2441 MHz). Note: The peak above the limit is the carrier frequency. Report No: 18878RET.101 Date: 2003-12-02 Page: 35 of 46 Annex A FET45_00.DOC CHANNEL: Highest (2480 MHz). Note: The peak above the limit is the carrier frequency. Report No: 18878RET.101 Date: 2003-12-02 Page: 36 of 46 Annex A FET45_00.DOC FREQUENCY RANGE 2.9 GHz to 12.75 GHz. CHANNEL: Lowest (2402 MHz). Report No: 18878RET.101 Date: 2003-12-02 Page: 37 of 46 Annex A FET45_00.DOC CHANNEL: Middle (2441 MHz). Report No: 18878RET.101 Date: 2003-12-02 Page: 38 of 46 Annex A FET45_0…

Text truncated - open the document above for the full version.

Test Report

15.247 (a) (1) Statement CETECOM S.A. – ITA team Page 1 of 1 Bluetooth devices 15.247 (a) (1) Statement Bluetooth devices Date: 27/01/2003 15.247 (a) (1) Statement CETECOM S.A. – ITA team Page 2 of 2 Bluetooth devices 1. Pseudorandom hop selection The generation of the hopping sequence in connection mode depends essentially on two input values: 1. LAP/UAP of the master of the connection 2. Internal master clock The LAP (lower address part) are the 24 LSB’s of the 48 BD_ADDRESS. The BD_ADDRESS is an unambiguous number of every Bluetooth unit. The UAP (upper address part) are the 24 MSB’s of the 48 BD_ADDRESS. The internal clock of a Bluetooth unit is derived from a free running clock which is never adjusted and is never turned off. For synchronisation with other units only offset are used. It has no relation to the time of the day. Its resolution is at least half the RX/TX slot length of 312.5 μs. The clock has a cycle of about one day (23h 30’). In most case it is implemented as 28 bit counter. For the deriving of the hopping sequence the entire LAP (24 bits), 4 LSB’s (4 bits) (Input 1) and the 27 MSB’s of the clock (Input 2) are used. With this input values different mathematical procedures (permutations, additions, XOR-operations) are performed to generate the sequence. This will be done at the beginning of every new transmission. The output constitutes a pseudorandom sequence covering 79 hop channels. The exact procedures for the generation of the pseudorandom hopping sequence can be found in “Bluetooth specification Version 1.1 – Part B – Baseband Specification – Chapter 11: Hop selection”. The following is a sample of a pseudorandom hopping sequence of 20 sec. 32000 hops): 34 72 31 69 28 66 25 63 22 60 19 57 16 54 13 51 10 48 07 45 04 42 01 39 77 36 74 33 71 30 68 27 65 24 62 21 59 18 12 20 09 17 61 20 58 17 00 08 76 05 49 08 46 05 67 75 64 72 37 75 34 72 55 63 52 60 25 63 22 60 43 51 40 48 13 51 10 48 31 39 28 36 01 39 77 36 19 27 16 24 68 27 65 24 70 29 55 14 64 23 49 08 58 17 43 02 52 11 37 75 34 72 43 02 28 66 37 75 20 09 17 06 14 03 11 00 22 60 07 45 16 54 01 39 76 65 73 62 70 59 67 56 78 37 63 22 72 31 57 16 66 25 51 10 60 19 45 04 42 01 51 10 36 74 45 04 28 17 25 14 22 11 19 08 30 68 15 53 24 62 09 47 18 56 03 41 12 50 76 35 73 32 03 41 67 26 76 35 59 48 56 45 53 42 50 39 61 20 46 05 55 14 40 78 49 08 34 72 43 02 28 66 25 63 34 72 19 57 28 66 52 62 49 59 46 56 43 53 40 50 37 47 34 44 31 41 28 38 25 35 22 32 19 29 12 50 09 47 61 48 58 45 77 08 09 19 47 06 58 17 67 26 64 23 37 24 34 21 53 63 64 74 23 61 34 72 31 69 14 52 49 59 32 42 19 57 02 40 37 47 20 30 72 31 04 42 11 21 22 32 62 49 59 46 01 39 77 36 58 45 41 28 52 39 35 22 59 69 56 66 29 67 26 64 47 57 44 54 17 55 14 52 35 45 32 42 05 43 02 40 23 33 20 30 72 31 69 28 11 21 08 18 60 19 57 16 78 09 75 06 48 07 45 04 66 76 63 73 36 74 33 71 38 76 21 59 32 70 15 53 26 64 09 47 20 58 03 41 00 38 11 49 73 32 05 43 69 56 66 53 63 50 60 47 69 28 52 11 63 22 46 05 78 37 75 34 44 33 41 30 72 01 77 06 38 76 43 02 60 68 65 73 26 64 31 69 56 64 45 53 22 60 11 49 30 68 27 65 75 64 72 61 24 32 29 37 69 28 74 33 12 20 17 25 57 16 62 21 63 22 60 19 57 16 54 13 37 26 42 31 31 20 36 25 39 77 36 74 33 71 30 68 13 02 18 07 07 75 12 01 15 53 12 50 09 47 06 44 14 52 11 49 59 48 56 45 08 16 13 21 53 12 58 17 75 04 01 09 41 00 46 05 71 00 60 68 37 75 26 64 45 04 42 01 11 00 08 76 39 47 44 52 05 43 10 48 27 35 32 40 72 31 77 36 78 37 75 34 72 31 69 28 52 41 57 46 46 35 51 40 54 13 51 10 48 07 45 04 28 17 33 22 22 11 27 16 30 68 27 65 24 62 21 59 35 73 32 70 29 67 26 64 27 37 32 42 21 31 26 36 15 25 20 30 09 19 14 24 13 51 02 40 56 43 45 32 01 39 69 28 44 31 33 20 60 19 65 24 24 11 29 16 60 70 57 67 24 62 21 59 18 56 15 53 42 52 39 49 73 60 78 65 18 56 23 61 73 32 70 29 18 28 15 25 49 36 54 41 73 32 78 37 51 38 48 35 45 32 42 29 14 52 11 49 38 48 35 45 02 40 78 37 26 36 23 33 69 28 66 25 14 24 11 21 59 46 56 43 53 40 50 37 59 18 48 07 53 12 42 01 35 22 32 19 29 16 26 13 35 73 24 62 29 67 18 56 09 47 06 44 33 43 30 40 76 35 73 32 21 31 18 28 64 23 61 20 09 19 06 16 52 11 49 08 76 07 73 04 42 29 39 26 36 23 33 20 77 06 66 74 43 02 32 70 57 65 62 70 23 61 28 66 39 77 36 74 05 73 02 70 41 49 30 38 07 45 75 34 29 37 15.247 (a) (1) Statement CETECOM S.A. – ITA team Page 3 of 3 Bluetooth devices 18 26 74 33 63 22 09 17 14 22 54 13 59 18 70 29 67 26 36 25 33 22 72 01 61 69 38 76 27 65 60 68 49 57 26 64 15 53 40 48 45 53 06 44 11 49 22 60 19 57 67 56 64 53 24 32 13 21 69 28 58 17 50 39 47 36 72 31 69 28 52 11 41 00 74 03 63 71 40 78 29 67 62 70 51 59 18 07 23 12 12 01 17 06 06 74 11 00 00 68 05 73 02 70 70 59 75 64 64 53 75 34 72 31 69 28 66 25 51 10 56 15 73 02 78 07 33 22 30 19 55 14 52 11 35 73 24 62 57 65 46 54 23 61 12 50 45 53 34 42 01 69 06 74 74 63 00 68 32 42 19 27 71 30 68 27 10 18 07 15 59 18 56 15 77 06 74 03 47 06 44 03 65 73 62 70 35 73 32 70 53 61 50 58 23 61 20 58 59 18 56 15 53 12 50 09 47 06 44 03 41 00 38 76 35 73 32 70 29 67 26 64 23 61 20 58 17 55 14 52 11 49 08 46 05 43 02 40 78 37 75 34 72 31 69 28 66 25 63 22 60 19 57 16 54 13 51 10 48 07 45 04 42 01 39 77 36 74 33 71 30 68 27 65 24 62 21 59 18 56 15 53 12 50 09 47 06 44 03 41 00 38 76 35 47 34 30 17 41 28 24 11 33 71 30 68 27 65 24 62 23 10 06 72 17 04 00 66 09 47 06 44 03 41 00 38 78 65 61 48 72 59 55 42 64 23 61 20 58 17 55 14 54 41 37 24 48 35 31 18 56 66 67 77 26 64 37 75 46 05 43 02 16 03 13 00 46 56 29 39 16 54 78 37 34 44 17 27 04 42 66 25 08 18 19 29 57 16 68 27 20 58 17 55 38 48 35 45 08 46 05 43 26 36 23 33 75 34 72 31 14 24 11 21 59 46 56 43 53 40 50 37 45 04 56 15 39 77 50 09 35 22 32 19 29 16 26 13 21 59 32 70 15 53 26 64 15 53 12 50 33 43 30 40 03 41 00 38 21 31 18 28 70 29 67 26 09 19 06 16 58 17 55 14 76 07 73 04 42 29 39 26 36 23 33 20 20 28 25 33 65 24 70 29 16 24 05 13 61 20 50 09 69 28 66 25 35 24 32 21 63 71 68 76 29 67 34 72 51 59 56 64 17 55 22 60 47 55 36 44 13 51 02 40 21 59 18 56 66 55 63 52 15 23 20 28 60 19 65 24 03 11 08 16 48 07 53 12 78 07 67 75 44 03 33…

Text truncated - open the document above for the full version.

Test Report

15.247 (g) Statement CETECOM S.A. – ITA team Page 1 of 1 Bluetooth devices 15.247 (g) Statement – Bluetooth devices Date: 27/01/2003 According to Bluetooth specifications the channel hopping sequence which has a very long period length (23h 30’) does not show repetitive patterns over a short time interval, but distributes the hop frequencies equally over the 79 hopping channels during a short time interval. The generation of the hopping sequence in connection mode depends essentially on two input values: 1. LAP/UAP of the master of the connection 2. Internal master clock The LAP (lower address part) are the 24 LSB’s of the 48 BD_ADDRESS. The BD_ADDRESS is an unambiguous number of every Bluetooth unit. The UAP (upper address part) are the 24 MSB’s of the 48 BD_ADDRESS. The internal clock of a Bluetooth unit is derived from a free running clock which is never adjusted and is never turned off. For synchronisation with other units only offset are used. It has no relation to the time of the day. Its resolution is at least half the RX/TX…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Sergi Torrents(Chief Technical Officer)

[email protected]+34 93 530 7200Fax: +34 93 530 7201

Test Firm

Centro de Tecnologia de las Comunicaciones, S.A.Alejandro Llamas

[email protected]34-95-2619156Fax: 34-95-2619113

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	1.70 mW

Confidentiality

Long Term

Grant Notes

The listed Output Power is Conducted. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.