RID-TR151-SPTRACKER

TR151-SP Smart Pallet Tracker User Manual Version 1.0 TR151-SP page 2 Table of Content 1. Introduction and Features.............................................................................................. 3 1.1 Introduction ............................................................................................................. 3 1.2 Features...................................................................................................................3 1.3 Hardware ................................................................................................................. 4 2. Start-up.......................................................................................................................... 5 2.1 Accessories .............................................................................................................. 5 2.2 Install SIM card ........................................................................................................ 6 2.3 How to Turn on/ Charge/ Reset ................................................................................... 9 4. Operating the TR151-SP ............................................................................................... 10 4.1 How to set TR151-SP to immediately report its position?.............................................. 10 4.2 How to set TR151-SP to periodically report its position? ............................................... 12 4.3 How to set TR151-SP to make GPRS period and disconnect report? ............................... 14 4.4 How to set TR151-SP enter Geo-fence mode? ............................................................. 16 4.5 How to set TR151-SP enter motion mode?.................................................................. 20 5 Configuration ................................................................................................................23 5.1 Read Configuration .................................................................................................. 23 5.1.1 How to send SMS and ask TR151-SP for sending back its configuration by SMS? ... 23 5.1.2 How to send SMS and ask TR151-SP for sending back its configuration by GPRS? .. 23 5.1.3 How to send GPRS command and ask TR151-SP for sending back its configuration by SMS?.................................................................................................................... 23 5.1.4 How to send GPRS command and ask TR151-SP for sending back its configuration by GPRS.................................................................................................................... 24 5.2 Write Configuration ................................................................................................. 25 5.2.1 How to configure TR151-SP by SMS?................................................................ 25 5.2.2 How to configure TR151-SP by GPRS server? .................................................... 28 5.3 TR151-SP Configuration Content ............................................................................... 31 6 Report Format ............................................................................................................... 33 6.1 SMS Report format .................................................................................................. 33 6.2 GPRS Report Format ................................................................................................ 35 6.3 Cell ID Report Format .............................................................................................. 36 TR151-SP page 3 1. Introduction and Features 1.1 Introduction TR151-SP is a durable and water resistant GPS/GSM/GPRS tracker. Users can install TR151-SP on vehicles or assets for tracking. It can send out SMS with its location (longitude and latitude) to user’s cell phone by GSM network or to personal computer by internet connection of GPRS network. Then users can track the location of their vehicles or assets. TR151-SP is designed to equip with high capacity of Li-ion battery for long operation time. It is very easy to install or hide TR151-SP in the car to perform tracking. TR151-SP is ideal application for vehicle tracking and equipment/assets monitoring. 1.2 Features z High sensitive GPS chipset z Combination of GPS ,GSM/GPRS wireless network z Durable and water resistant GPS tracker z Ideal application for vehicle tracking and equipment/assets monitoring z Optional external antenna for GPS reception z Rechargeable 15A high capacity Li-ion battery for long operation time z External DC power supply z Configuration can be done via SMS commands or by application software via USB interface. z Geo-fence function NOTE: Geo-fence feature allows user to set up to 10 permissible or restricted areas whose shape is either circular or rectangular for tracking the vehicles or monitoring the equipment/assets. Users can choose to receive alarm message if TR151-SP enters the restricted areas or to receive alarm message if TR151-SP gets out the permissible areas. TR151-SP page 4 1.3 Hardware GSM module: MC55i GSM 850/900/1800/1900 Operating temperature: -20° to 55° C Charging temperature 0° to 45° C Antenna Type: GPS patch antenna Dimension: 128x105x68 mm, for rectangular part 128x130x68 mm, including reset/USB extrusion part Battery: 15 A rechargeable Li-ion battery Interface: Mini USB port for purpose of firmware upgrade, battery charging Button: Reset Button: Press the Reset Button for 3 seconds to reset the device Note: 1. Device is always on until the battery runs out. 2. Reset button is disabled when external power connected. Charging time: 23 hours for fully charge TR151-SP page 5 2. Start-up 2.1 Accessories TR151-SP AC charger USB Cable TR151-SP page 6 2.2 Install SIM card 1. Remove all 4 screws from the bottom of the device. 2. Carefully, pull both sides apart. This will reveal the insides of the TR151-SP. 格式化: 項目符號及編號 TR151-SP page 7 3. Inside, you’ll find a battery, …

Text truncated - open the document above for the full version.

1 of 5 External Photos Model Number: TR151-SP FCC ID: RID-TR151-SP 2 of 5 EUT Photo 1 ) EUT Photo 2 ) 3 of 5 EUT Photo 3 ) EUT Photo 4 ) 4 of 5 EUT Photo 5 ) EUT Photo 6 ) 5 of 5 EUT Photo 7 )

©2008 A Test Lab Techno Corp. 1 of 2 SAMPLE LABEL ©2008 A Test Lab Techno Corp. 2 of 2 Label Format: Label Position: Equipment Label

1 of 12 Internal Photos Model Number: TR151-SP FCC ID: RID-TR151-SP 2 of 12 EUT Photo 1 ) EUT Photo 2 ) 3 of 12 EUT Photo 3 ) EUT Photo 4 ) 4 of 12 EUT Photo 5 ) EUT Photo 6 ) 5 of 12 EUT Photo 7 ) EUT Photo 8 ) 6 of 12 EUT Photo 9 ) EUT Photo 10 ) 7 of 12 EUT Photo 11 ) EUT Photo 12 ) 8 of 12 EUT Photo 13 ) EUT Photo 14 ) 9 of 12 EUT Photo 15 ) EUT Photo 16 ) 10 of 12 EUT Photo 17 ) EUT Photo 18 ) 11 of 12 EUT Photo 19 ) EUT Photo 20 ) 12 of 12 EUT Photo 21 ) EUT Photo 22 )

TR151-SP page 6 2.2 Install SIM card 1. Remove all 4 screws from the bottom of the device. 2. Carefully, pull both sides apart. This will reveal the insides of the TR151-SP. 格式化: 項目符號及編號 TR151-SP page 7 3. Inside, you’ll find a battery, a TR151-SP, a USB extension cable and a reset button. 4. Carefully, unplug the battery from the TR151-SP and the reset button. 5. Unplug the TR151-SP from the USB extension and remove the TR151-SP from the casing. 6. Open the SIM holder. 7. Install the SIM card and close the SIM holder. 8. Plug everything back together as shown below. 9. Once everything is plugged in, put the two halves back together. 格式化: 項目符號及編號 TR151-SP page 8 10. Screw in the four screws and you’re done. TR151-SP page 9 2.3 How to Turn on/ Charge/ Reset Device is always on until battery exhausted. Charging: Before using TR151-SP for the first time, please fully charge it by connecting to AC power adapter for at least 23 hours (The attached battery is specially designed for TR151-SP.) Reset: Reset button: Pressing the Reset Button for 3 seconds will reset the device. Note: Reset button is disabled when the external power connected TR151-SP page 10 4. Operating the TR151-SP 4.1 How to set TR151-SP to immediately report its position? Users can make TR151-SP to do SMS or/ and GPRS immediate report of its location by the command media of SMS or GPRS. . The command is following as: SMS Command Media for Immediate Report SMS Report Media ?0,IMEI,Report_Format,Report_Phone_Number! GPRS Report Media ?8,IMEI,Return_Phone_Number! SMS and GPRS Report Media ?21,IMEI,Report_Format,Report_Phone_Number! GPRS Command Media for Immediate Report SMS Report Media $0,IMEI,Report_Format,Report_Phone_Number! GPRS Report Media $8,IMEI! SMS and GPRS Report Media $21,IMEI,Report_Phone_Number! The table below explains the content of the command. Format Description ?,$ Start sign 0,8,21 Function code IMEI IMEI code of the TR151-SP Report_Format 0 or 1. 0 is text format. 1 is NMEA format Report Phone Number The phone number for receiving the report and OK message Return Phone Number The phone number for receiving OK message ! End sign TR151-SP will send OK message to the return phone number when the command media is SMS or to GPRS server when the command media is GPRS to confirm it has received the request. And then it will start to get fixed the position. After getting fixed the position, it will send its location to the report phone number or GPRS server. If TR151-SP can not get fixed the position within the “Maximum GPS Fixing Time”, it will return the previous location. TR151-SP page 11 NOTE: 1. The coordinate unit of report format 0 is degree. The coordinates unit of report format 1 is degree and minute with a 4-digit decimal fraction 2. If TR151-SP can not get fixed the position within the “Maximum GPS Fixing Time”, it will return the previous location. 3. Please refer “ How to configure TR151-SP by SMS?.” to set “Maximum GPS Fixing Time” Example: If you’d like to ask TR151-SP to send immediate report in format0 to 626-123456 by SMS command media. You have to enter ?0, 355632000166323,0,626123456! And then you will get ?0,355632000166323,OK!. After TR151-SP get fixed of the position, you will get the position report like Position report Name 2008/12/15 10:20:39 N2459.8915,E12129.2186 GPS fixed Example: Require GPRS immediate report sent to 626-123456 You have to enter “?8,355632000166323,626123456!” And then you will get “? 8,355632000166323,OK!” Example: Require SMS & GPRS immediate report sent to 626-123-4567 and to GPRS server You have to enter “?21,355632000166323,6261234567!” And then you will get “?21,355632000166323,OK!” TR151-SP page 12 4.2 How to set TR151-SP to periodically report its position? Users can make TR151-SP to do SMS or/ and GPRS periodic report of its location by the command media of SMS or GPRS. . The format of command is following as: SMS Command Media for Periodic Report SMS Report Media ?1,IMEI,Report_Interval,Number_of_Reports,Report_Format,Report_Phone_Number! GPRS Report Media ?9,IMEI,Report_Interval,Return_Phone_Number! SMS and GPRS Report Media ?22,IMEI,Report_Interval,Report_Phone_Number! GPRS Command Media for Periodic Report SMS Report Media $1,IMEI,Report_Interval,Number_of_Reports,Report_Format,Report_Phone_Number! GPRS Report Media $9,IMEI,Report_interval! SMS and GPRS Report Media $22,IMEI,Report_Interval,Report_Phone_Number! The table below explains the content of the command. Format Description ?,$ Start sign 1,9,22 Function code IMEI IMEI code of the TR151-SP Report_Interval Set the interval between two report Number_of_Reports Set how many reporting SMS should be sent Report_Format 0 or 1. 0 is text format. 1 is NMEA format Report Phone Number The phone number for receiving the report and OK message Return Phone Number The phone number for receiving OK message ! End sign TR151-SP will send OK message to the return phone number when the command media is SMS or to GPRS server when the command media is GPRS to confirm it has received the request. And then TR151-SP will periodically send its location to the report phone number or/and GPRS server according to the report interval. NOTE: 1. The coordinate unit of report format 0 is degree. The coordinates unit of report format 1 is degree and minute with a 4-digit decimal fraction 2. If user sets the number of reports as 0, TR151-SP will keep sending the periodical report until user TR151-SP page 13 send the SMS of ?2,IMEI,Return_Phone_Number! to stop the periodical report. 3. For the command of “?9,IMEI,Report_Interval,Return_Phone_Number!” and “$9,IMEI,Report_interval!”, TR151-SP would keep connected to GPRS server after it sends the location data. 4. For the command of “?22,IMEI,Report_Interval,Report_Phone_Number!” and “$22,IMEI,Report_Interval,Report_Phone_Number!”, TR151-SP would disconnect from GPRS server after it sends the location data. Example 1: Require continuous 120-sec period report in format0 sent to 626123…

Text truncated - open the document above for the full version.

MC55/56 Hardware Interface Description Confidential / Released s MC55/56_hd_v04.00 Page 1 of 108 17.02.2006 Hardware Interface Descri p tion MC55/56 Siemens Cellular Engine Version: 04.00 DocID: MC55/56_hd_v04.00 MC55/56 Hardware Interface Description Confidential / Released s MC55/56_hd_v04.00 Page 2 of 108 17.02.2006 Document Name: MC55/56 Hardware Interface Description Version: 04.00 Date: February 17, 2006 DocId: MC55/56_hd_v04.00 Status: Confidential / Released General Notes Product is deemed accepted by Recipient and is provided without interface to Recipient’s products. The documentation and/or Product are provided for testing, evaluation, integration and information purposes. The documentation and/or Product are provided on an “as is” basis only and may contain deficiencies or inadequacies. The Documentation and/or Product are provided without warranty of any kind, express or implied. To the maximum extent permitted by applicable law, Siemens further disclaims all warranties, including without limitation any implied warranties of merchantability, completeness, fitness for a particular purpose and non-infringement of third-party rights. The entire risk arising out of the use or performance of the Product and documentation remains with Recipient. This Product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. Applications incorporating the described product must be designed to be in accordance with the technical specifications provided in these guidelines. Failure to comply with any of the required procedures can result in malfunctions or serious discrepancies in results. Furthermore, all safety instructions regarding the use of mobile technical systems, including GSM products, which also apply to cellular phones must be followed. Siemens or its suppliers shall, regardless of any legal theory upon which the claim is based, not be liable for any consequential, incidental, direct, indirect, punitive or other damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information or data, or other pecuniary loss) arising out the use of or inability to use the Documentation and/or Product, even if Siemens has been advised of the possibility of such damages. The foregoing limitations of liability shall not apply in case of mandatory liability, e.g. under the German Product Liability Act, in case of intent, gross negligence, injury of life, body or health, or breach of a condition which goes to the root of the contract. However, Claims for Damages arising from a breach of a condition which goes to the root of the contract shall be limited to the foreseeable damage which is intrinsic to the contract, unless caused by intent or gross negligence or based on liability for injury of life, body or health. The above provision does not imply a change on the burden of proof to the detriment of the Recipient. Subject to change without notice at any time. The interpretation of this general note shall be governed and construed according to German law without reference to any other substantive law. Copyright Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. Copyright © Siemens AG 2006 MC55/56 Hardware Interface Description Confidential / Released s MC55/56_hd_v04.00 Page 3 of 108 17.02.2006 Contents 0 Document history..........................................................................................................7 1 Introduction .................................................................................................................11 1.1 Related documents ..............................................................................................11 1.2 Terms and abbreviations .....................................................................................12 1.3 Type approval ......................................................................................................15 1.4 Safety precautions ...............................................................................................17 2 Product concept..........................................................................................................19 2.1 MC55/56 key features at a glance .......................................................................20 2.2 Circuit concept .....................................................................................................23 3 Application Interface...................................................................................................24 3.1 Operating modes .................................................................................................25 3.2 Power supply .......................................................................................................27 3.2.1 Power supply pins on the board-to-board connector .............................27 3.2.2 Minimizing power losses ........................................................................28 3.2.3 Monitoring power supply ........................................................................28 3.3 Power up / down scenarios..................................................................................29 3.3.1 Turn on MC55/56 ...................................................................................29 3.3.1.1 Turn on MC55/56 using the ignition line /IGT (Power on)......................30 3.3.1.2 Timing of the ignition process ................................................................31 3.3.1.3 Turn on MC55/56 using the POWER signal ..........................................32 3.3.1.4 Turn on MC55/56 using the RTC (Alarm mode) .....…

Text truncated - open the document above for the full version.

A Test Lab Techno Corp. Changan Lab：No. 140 -1, Changan Street, Bade City, Taoyuan County, Taiwan R.O.C. Te l：886-3-271-0188 / Fax：886-3-271-0190 MPE Report Test Report No. ： 1008FS14 Applicant ： GlobalSat Technology Corporation Manufacturer ： GlobalSat Technology Corporation Product Type ： Tracker Trade Name ： GlobalSat Model Number ： TR151-SP Dates of Test ： Aug. 12 , 2010 Test Specification ： 47 CFR § 2.1091 47 CFR §1.1310 ANSI / IEEE Std.C95.1-1999 Location of Test Lab. ： Chang-an Lab. 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. 4. This document may be altered or revised by A Test Lab Techno. Corp. personnel only, and shall be noted in the revision section of the document. Sam Chuang 20100820 Alex Wu 20100820 Approve Signer Testing Engineer ©2010 A Test Lab Techno Corp. Report Number: 1008FS14Page 1 of 6 Contents 1. Description of Equipment under Test (EUT) ................................................................................................. 3 1.1 RF Output Power ................................................................................................................................ 4 2. Human Exposure Assessment ..................................................................................................................... 5 2.1 Test Result .......................................................................................................................................... 6 ©2010 A Test Lab Techno Corp. Report Number: 1008FS14Page 2 of 6 ©2010 A Test Lab Techno Corp. Report Number: 1008FS14Page 3 of 6 1. Description of Equipment under Test (EUT) Applicant GlobalSat Technology Corporation Applicant Address 16F., No. 186, Jian Yi Road, Chung Ho City, Taipei hsien, Taiwan Manufacturer GlobalSat Technology Corporation Manufacturer Address 16F., No. 186, Jian Yi Road, Chung Ho City, Taipei hsien, Taiwan Product Type Tracker Trade Name GlobalSat Model Number TR151-SP FCC ID RID-TR151-SP Hardware Version GS-EB-TR151-01-V1.1 Software Version F-0TR-151MPT-10081322 Frequency Range 824.2 - 848.8 MHz GSM/GPRS 850 1850.2 - 1909.8 MHz PCS/GPRS 1900 Transmit Power GSM/GPRS 850: 1.778 W / 32.50 dBm (conducted power) PCS/GPRS 1900: 0.741 W / 28.70 dBm Antenna Specification GSM 850: 3.9 dBi DCS 1900: 1.5 dBi Antenna Designation Monopole Antenna Temperature Range -30 ~ +70°C The above equipment was tested by Compliance Certification Services Inc. For compliance with the requirements set forth in 47 CFR § 2.1091 & 47 CFR § 1.1310. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties 1.1 RF Output Power Band Date Rate CH Frequency (MHz) Average burst Conducted power (dBm) Worst Case 128 824.2 32.25 □ 190 836.6 32.40 □ GSM850 --- 251 848.8 32.50 ■ 128 824.2 31.73 □ 190 836.6 31.88 □ GPRS850 4Down1Up 251 848.8 31.98 □ 128 824.2 31.72 □ 190 836.6 31.87 □ GPRS850 3Down2Up 251 848.8 31.97 ■ 512 1850.2 28.70 ■ 661 1880.0 28.34 □ PCS1900 --- 810 1909.8 28.38 □ 512 1850.2 28.64 □ 661 1909.8 28.29 □ GPRS1900 4Down1Up 810 1909.8 28.34 □ 512 1850.2 28.67 ■ 661 1909.8 28.30 □ GPRS1900 3Down2Up 810 1909.8 28.34 □ ©2010 A Test Lab Techno Corp. Report Number: 1008FS14Page 4 of 6 2. Human Exposure Assessment Due to the design and installation of this product, it is not possible to conduct SAR evaluation. This is because client either manufactures or supplies the antenna(s) that will be used in the installation of this product. Therefore, this product will be evaluated as a mobile device per 47 CFR §1.1310 titled “Radiofrequency radiation exposure limits”, generally referred to as MPE limits. In 47 CFR § 2.1091, paragraph (b) defines a mobile device as “a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. ” This product is intended to be installed into a vehicle such that the unit is physically secured at one location. In the installation guide supplied with the product, Client has made the following statement: “IMPORTANT: To meet the FCC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user and nearby persons and the antenna”. Based on the installation of the transceiver and the antenna, the transmitters radiating structure is more than 20 cm from the user. Thus, this product is a “mobile device” as defined in section § 2.1091 paragraph (b). Exposure evaluation Equation from page 18 of OET Bulletin 65, Edition 97-01 2 4R PG S π = Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna. ©2010 A Test Lab Techno Corp. Report Number: 1008FS14Page 5 of 6 ©2010 A Test Lab Techno Corp. Report Number: 1008FS14Page 6 of 6 2.1 Test Result Band Data Rate Frequency (MHz) Limit (mw) Distance (cm) [R] Power (dBm) [P] ANT Gain (dBi) [G] [P]+ [G] (W) [TP] Duty Cycle Power Density [S] 824.2 0.54920 32.25 3.90 4.121 0.125 0.062 836.6 0.55820 32.40 3.90 4.266 0.125 0.065 GSM 850 ----- 848.8 0.56620 32.50 3.90 4.365 0.125 0.066 824.2 0.54920 31.73 3.90 3.656 0.125 0.055 836.6 0.55820 31.88 3.9…

Text truncated - open the document above for the full version.

55 44 33 22 11 4 4 3 3 2 2 1 1 USBID IREF IREF USBID GPSVCC 3V3 BATTY 3V3 GPS_POW IGT IGT-CTL BATTY BATTY EMERG-CTL EMERG-RST STATUS 5VCC USBDNUSBDP EN BATTY BATTY BATTY 3V3 NTC BATT_TEMP GPSVCC GSM ON Vin 5V +/-5% Iin > 1A B(A1) C E(A2) 220K 363mA 10%200K 400mA 10%160K 500mA 10%100K 800mA 10% BATTY GSM OFF ARM POWER R21470KR21470K 27nC727nC7 R2 20K 1% R2 20K 1% C210uC210u 12 R97 NC/0R R97 NC/0R 100nC1100nC1 10K 1%R310K 1%R3 TP5TP5 R16470KR16470K ESD1ESDESD1ESD 1 34 56 78 2 TP14TP14 C3100nC3100n 12 10PC1210PC12 100nC4100nC4 27PC1127PC11 Q92SC4081Q92SC4081 2 1 3 D9 1SS355 D9 1SS355 12 1uC61uC6 4u7C164u7C16 R111 10K 1% R111 10K 1% D3D3 A C Mini_USB_5Pins J2 Mini_USB_5Pins J2 VCC 1 D- 2 D+ 3 IREF 4 GND 5 NC 7 NC 6 NC 8 NC 9 200K1%R8200K1%R8 TP13TP13 TP12TP12 200KR19200KR19 TP4TP4R9 NC/0R R9 NC/0R U7 XC61FC2712MRN U7 XC61FC2712MRN Vout 2 VIN 3 VSS 1 Q42SC4081Q42SC4081 2 1 3 C810uC810u 12 100R R117 100R R117 D S G Q5AP2301 D S G Q5AP2301 B E C NC/100KR7NC/100KR7 R18 470K R18 470K ISL9205U1ISL9205U1 EN 6 TIME 4 VSEN 9 V2P8 7 IREF 8 VIN 1 GND 5 VBAT 10 STATUS 3 FAULT 2 GND 11 Q62SC4081Q62SC4081 2 1 3 100nC9100nC9 Q8 2SC4081 Q8 2SC4081 2 1 3 TP15TP15 TP9TP9 TP7TP7 R23 470K R23 470K TP3TP3 TP11TP11 Q72SC4081Q72SC4081 2 1 3 R24470KR24470K 470KR25470KR25 TP10TP10 BATTYJ1BATTYJ1 123 45 R15 470K R15 470K R14200K1%R14200K1% TP2TP2 100nC15100nC15 R22470KR22470K D1 RB050 D1 RB050 1 2 U2 XC6209B33AMRN 3.3V SOT235U2 XC6209B33AMRN 3.3V SOT235 VIN 1 GND 2 NC 4 CE 3 VOUT 5 R1 NC/0R R1 NC/0R NC/100K R118 NC/100K R118 C1010uC1010u 12 TP8TP8 R20 470K R20 470K TP64TP64 R4 560R R4 560R R17470KR17470K AA BB CC DD EE 4 4 3 3 2 2 1 1 nJTRSTJTDOJTMSJTCKJTDInRSTIN CS#SCLK JTMSnRSTINJTDOnJTRST JTDI JTCK SOSI SO SCLK CS# SI 1V8 USBDPUSBDN 3V3 GPSVCC GPSVCC 3V3 3V3 3V3 3V3 3V3 3V3 3V3 IGT-CTL GPS_POW TXCRXC RXB TXCTXB RXC TXA RXARTSA CTSA CTSA RING EMERG-CTL ARM_LED RTSA SETUP LVCC USBDN BATTY USBDP RXCTXC GPS_LED BOOTSEL BATTY RXBTXB TXB OSC_EN nRSTIN SOSKEY VIDRATIONKEYINT OSC NS5V RXB RXA GSMWDPICINT charger BOOTSEL POWKEY TXA 3V3 NTC NTC TitleSize Document Number Rev Date: Sheet of 1 GS-EC-TR151-01-V1.1A A 46 Thursday, July 29, 2010 MCU TitleSize Document Number Rev Date: Sheet of 1 GS-EC-TR151-01-V1.1A A 46 Thursday, July 29, 2010 MCU TitleSize Document Number Rev Date: Sheet of 1 GS-EC-TR151-01-V1.1A A 46 Thursday, July 29, 2010 MCU D5NC/1SS355D5NC/1SS355 12 Q13 2SC4081 Q13 2SC4081 2 1 3 TP19TP19 R81 470K R81 470K R27 NC/0R R27 NC/0R R34 NC/100R R34 NC/100R R51 NC R51 NC 1 2 R80470KR80470K R85NC/200KR85NC/200K C2722pC2722p 12 TP27TP27TP34TP34 C30100nC30100n 12 TP31TP31 U4XC61CC3002MRNU4XC61CC3002MRN /RST 1 VSS 2 VIN 3 TP24TP24 TP16TP16 C24 10uFC24 10uF 1 2 TP18TP18 U3 STR711FR2 U3 STR711FR2 U1TX B1 U1RX A1 P0_12 C1 VSS B2 U2RX C2 U2TX D1 BOOTEN C3 VSS D2 V33 E1 JTDI D3 JTMS E2 JTCK F1 JTDO D4 nJTRST F2 NU E3 TEST G1 V33IO H1 VSSIO H2 CK H3 P0_15 G2 VSS A7 P1_15 A8 P1_14 B8 P1_13 D6 P1_10 C7 P1_9 E5 VSS C8 USBDN D7 USBDP E6 P1_8 D8 P1_7 E7 VSSIOPLL F6 V33IOPLL E8 P1_6 F7 P1_5 G7 P1_4 F8 P1_3 G8 P1_2 H8 P1_1 H7 AIN0 F5 RTCXTI G3 RTCXTO H4 /STDBY F3 /RSTIN G4 VSSBKP H5 AVSS G6 AVDD E4 VSS18 H6 V18 G5 V18BKP F4 U0TX A2 U0RX C4 P0_7 B3 P0_6 D5 P0_5 A3 VSS B4 V18 C5 VSS18 A4 P0_4 B5 P0_3 C6 P0_2 A5 U3RX B6 U3TX B7 V33 A6 R44200K1%R44200K1% R29 NC/0R R29 NC/0R R33 NC/100R R33 NC/100R C50100nC50100n 12 R480RR480R 12 TP101TP101 TP28TP28 R42NC/100KR42NC/100K R32 100R R32 100R TP32TP32 R31 100R R31 100R R40 NC/4.7KR40 NC/4.7K C23100nC23100n 1 2 C22100nC22100n 1 2 WTBQ-07MT-N022-41 J3 WTBQ-07MT-N022-41 J3 1234567 89 Y1 32.768KHZ Y1 32.768KHZ 1 2 C2622pC2622p 12 R94 100R R94 100R 10PC1710PC17 R47NC/0RR47NC/0R 12 TP25TP25 TP20TP20 TP17TP17 R93 100R R93 100R TP36TP36 R43 200K1% R43 200K1% U5 NC/MX25L8005 U5 NC/MX25L8005 CS# 1 SO 2 WP# 3 GND 4 SI 5 SCLK 6 HOLD# 7 VCC 8 G 9 100nC29100nC29 10PC1810PC18 R52 0R R52 0R C19100nC19100n 1 2 TP30TP30 TP33TP33 TP23TP23 TP29TP29 R112 NC/100K R112 NC/100K Y2OSC4MHzY2OSC4MHz OUT 3 GND 2 EN 1 VCC 4 C25 33nC25 33n 1 2 TP21TP21 C28 10uFC28 10uF 1 2 C511UC511U 12 TP26TP26 R82470KR82470K TP35TP35 C20100nC20100n 1 2 R26NC/1K5R26NC/1K5 C21100nC21100n 1 2 55 44 33 22 11 4 4 3 3 2 2 1 1 EMERG-RST IGT TXA RXA BATTY GSMWDGSM_LED RINGCTSA RTSADTRA DCDADSRA DSRA DTRA DCDA BATTY BATT_TEMP TitleSize Document Number Rev Date: Sheet of 1 GS-EC-TR151-01-V1.1A A4 56 Thursday, July 29, 2010 GSM TitleSize Document Number Rev Date: Sheet of 1 GS-EC-TR151-01-V1.1A A4 56 Thursday, July 29, 2010 GSM TitleSize Document Number Rev Date: Sheet of 1 GS-EC-TR151-01-V1.1A A4 56 Thursday, July 29, 2010 GSM (not mounted) 6PIN SIM SIM (not mounted) 放置於 M1 41PIN 旁 所有電容 BATTY&GND 走線直接至 M1 皆作成平行線，並盡量少灌孔 電流為 2A Dieclectric Constant: 4.4Fifty-Ohm Co-Planar Waveguide: 10 mil Line Width,10 mil Gap Width C40NC/100n10%C40NC/100n10% H19鏍孔H19鏍孔 330uC38330uC38 330u C36 330u C36 330uC37330uC37 J4SIM5-06M1-KT42-07J4SIM5-06M1-KT42-07 CCIO 6 CCCLK 3 GND 4 VPP 5 CCRST 2 CCVCC 1 WTBQ-02MT-N022-31 MIC1 WTBQ-02MT-N022-31 MIC1 21 34 H11鏍孔H11鏍孔 H23鏍孔H23鏍孔 H1鏍孔H1鏍孔 R56 8P2R56 8P2 H3鏍孔H3鏍孔 TP49TP49 H5PAD1H5PAD1 S2TPS2TP . 1 TP43TP43 10uC3910uC39 L1 BLM15AG601SN1(Murata)/0R L1 BLM15AG601SN1(Murata)/0R H25鏍孔H25鏍孔 H17鏍孔H17鏍孔 DF12(3.0)-50DP-0.5V(86)(MC55i) M1 DF12(3.…

Text truncated - open the document above for the full version.