RID-TW100Wearable Watch Tracker

TW-100 Wearable Watch Tracker User Manual Ver 1.0 Table of Contents Introduction................................................................................................................‐ 1 ‐ Features......................................................................................................................‐ 1 ‐ Specifications.............................................................................................................‐ 2 ‐ Getting Started...........................................................................................................‐ 3 ‐ TW‐100 Device Configuration....................................................................................‐ 6 ‐ Operation Mode.........................................................................................................‐ 8 ‐ Settings of TW‐100...................................................................................................‐ 10 ‐ FCC Warning.............................................................................................................‐ 15 ‐ CE Warning...............................................................................錯誤! 尚未定義書籤。 ‐ 1 ‐ Introduction TW‐100 is a wearable type of personal tracker that designed in wrist watch style and intended for safety monitoring for elders and children. TW‐100 equips with both microphone and speaker that allows hands‐free two‐way communication capability. Also, the Notification button offers an easy way to make a phone call to those pre‐set phone books and sends Notification alert together with just a single click. The device integrates with a back‐end platform services allows user to configure device remotely and also help user to get understood where the device is immediately or periodically by sending GPRS/SMS commands to the device. Features z Quad‐Band GSM/GPRS z 2 Way‐Voice communication z Notification button for instant call out and SMS/GPRS alert. z Configurable phone book for making phone call. z Speaker‐phone capability z Regular/Real‐time tracking by remote configuration z Power Low/Off alert via SMS/GPRS z OLED display 96x64 resolution z Support web services for location tracking. z IPX4 waterproof. z Rechargeable Li‐ion battery. ‐ 2 ‐ Specifications Hardware Specifications Network Quad‐Band GSM/GPRS GSM Antenna Type Monopole antenna GPS High Sensitivity GPS GPS Antenna Type Patch Antenna 12x12x4 Operating Temperature ‐20°~45°C Humidity 5% to 95% Non‐condensing Battery Rechargeable 320 mAh battery Hardware Buttons 4 Buttons Flash memory size Internal 4MB Display OLED display Charging connector DC 5V /1A, micro USB Charging time Up to 3 Hours Dimension 47.8mm(D) x 14.3mm(H) Weight 50g Speaker/Mic Yes Device functions ‐ Location report modes (ping/periodic) ‐ Notification report mode via SMS/GPRS ‐ Preset 3 contacts and 10 white list contacts allow to call‐in ‐ Speaker phone capability for 2 way voice comm. ‐ Voice monitor function ‐ Auto power saving mode Waterproof Support IPX4 Waterproof ‐ 3 ‐ Getting Started • Included accessories TW‐100 Micro USB Cable AC Charger (Option) • Preparing your SIM Card for GPRS‐activation 1. Inform your GSM service provider to activate the GPRS function, get the APN information, the user name, and user password. ‐ 4 ‐ • Install the SIM Card 1. Please make sure TW‐100 is power off. Unlock 4 screws with the proper screwdriver. 2. Remove the rear cover. 3. Remove the battery carefully and then push the SIM card cover downward (opened). 4. Open the SIM card cover. 5. Carefully make sure the SIM card is installed correctly, with the contact (gold part) of the SIM card facing downward. Close SIM card cover and push it upward (locked). 6. Put the battery on the original place. 7. Put the rear cover and then Lock 4 screws accordingly. ‐ 5 ‐ • Charge TW‐100 If you are using the TW‐100 for the first time, charge the TW‐100 for at least 3 hours. (The included battery is manufacturer‐approved for use with the TW‐100. The use of any other battery might damage TW‐100.) • Power TW‐100 On/Off Power On: Press and hold the “Power” key for 5 seconds. The LCD and backlight will turn on. Power Off: Press and hold the Power key until the display’s power off bar fully finishes. Then the LCD and backlight will turn off. ‐ 6 ‐ TW‐100 Device Configuration 1. 2. 3. 4. 5. 6. 7. 8. 1. 2. 3. 4. 5. 6. 7. 8. 1. 2. 3. 4. 5. 6. 7. 8. 1 Power(Long click)/Reject /Back Hold down to power the device on/off. When there is an incoming call or during a phone call, press to reject or hang up the call. In the “Settings Menu”, press to cancel the setting and back to the last page. 2 Micro USB Port Used for charging the TW‐100. 3 Microphone Microphone. 4 Notification (Long click)/Answer/Confirm /Menu Make sure UI is displayed first. Hold to send a notification message to the assigned phone number and make a notification call to the assign number. When there is an incoming call, press to answer the phone call. Press to enter into the “Settings Menu”. In “Settings Menu”, press to confirm that setting. 5 Speed Dial #1(Long click)/ Increase Volume/ Up/Clock Switch Hold the button down to call the speed dial #1. During a phone call, press this button to increase the volume level. In “Settings Menu”, pressing this button will ‐ 7 ‐ scroll up. Short press the button to switch to the other kind of clock. 6 LCD LCD. 7 Speed Dial #2 (Long click)/Decrease Volume/Down/Clock Switch Hold the button down to call the speed dial #2. During a phone call, press this button to decrease the volume level. In “Settings Menu”, pressing this button will scroll down. Short press the button to switch to the other kind of clock. 8 Speaker Used for listening to the other party during the phone call. ‐ 8 ‐ Operation Mode General Icons This icon would be displayed, when you call someone but it fails. This icon would be displayed, when the phone call is ended. Battery is being charged. Battery is fully charged. Battery capacity is very low. This icon wou…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 GlobalSat WorldCom Corporation 2015/12/03 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, GlobalSat WorldCom Corporationhereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Wearable Watch Tracker, TW-100 FCC ID: RID-TW100 Sincerely, Client’s signature Ray Tsai / Director GlobalSat WorldCom Corporation 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553, Taiwan TEL: 886-2-82263799#1206 FAX: 886-2-82263899

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template& Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (current) 4.0 5.0 Nov 19 2015 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 5.0 GlobalSat WorldCom Corporation 2015/12/03 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: RID-TW100 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description - Tune up Procedure - Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Ray Tsai / Director GlobalSat WorldCom Corporation 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553, Taiwan TEL: 886-2-82263799#1206 FAX: 886-2-82263899 SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 5.0 GlobalSat WorldCom Corporation 2015/12/03 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: RID-TW100 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of / / . not to exceed 180 days from the Grant Date. See KDB 726920.. - User Manual - Internal Photos - External Photo - Test Setup photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature : Ray Tsai / Director GlobalSat WorldCom Corporation 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553, Taiwan TEL: 886-2-82263799#1206 FAX: 886-2-82263899

GlobalSat WorldCom Corporation 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553, Taiwan TEL: 886-2-82263799#1206 FAX: 886-2-82263899 Attestation for FCC Declaration of Conformity Brand: GlobalSat Model Number: TW-100 Date: 2015/12/03 FCC ID: RID-TW100 Please be notified that we, GlobalSat WorldCom Corporation, would like to declare that the composite portion categorized as computer peripheral has been authorized under the FCC Declaration of Conformity procedures. The test report numbers supporting the DoC is 1512FE11. Testing in regards to this rep ort was done by A Test Lab Techno Corp., located in No. 140-1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C), which has been accredited in accordance to all of the requirements of 47 CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Client’s signature : Ray Tsai / Director GlobalSat WorldCom Corporation 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553, Taiwan TEL: 886-2-82263799#1206 FAX: 886-2-82263899

ID Label info & Label Location FCC ID : RID-TW100

1 of 7 Internal Photos Model Number: TW-100 FCC ID: RID-TW100 2 of 7 EUT Photo 1 ) EUT Photo 2 ) 3 of 7 EUT Photo 3 ) EUT Photo 4 ) 4 of 7 EUT Photo 5 ) EUT Photo 6 ) 5 of 7 EUT Photo 7 ) EUT Photo 8 ) 6 of 7 EUT Photo 9 ) EUT Photo 10 ) 7 of 7 EUT Photo 11 ) GSM /DCS ANT.

A Test Lab Techno Corp. Changan Lab：No. 140-1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C). Te l：886-3-271-0188 / Fax：886-3-271-0190 SAR EVALUATION REPORT Test Report No. ： 1512FS11 Applicant ： GlobalSat WorldCom Corporation Applicant Address ： 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553 Taiwan Manufacture ： GlobalSat WorldCom Corporation Manufacture Address ： 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553 Taiwan Product Type ： Wearable Watch Tracker Trade Name ： GlobalSat Model Number ： TW-100 Date of Received ： Nov. 18, 2015 Test Period ： Dec. 01 ~ Dec. 02, 2015 Date of Issued ： Dec. 15, 2015 Test Environment ： Ambient Temperature： 22 ± 2 ° C Relative Humidity：40 - 70 % Standard ： ANSI/IEEE C95.1-1999 / IEEE Std. 1528-2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r02 KDB 447498 D01 v06 / KDB 941225 D01 v03r01 Test Lab Location ： Chang-an Lab 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. The test results in the report only apply to the tested sample. Approved By ： Tested By ： (Bill Hu) (Sky Chou) Report Number: 1512FS11Page 1 of 77 ©2015 A Test Lab Techno Corp. Contents 1. Summary of Maximum Reported SAR Value................................................................................................. 3 2. Description of Equipment under Test (EUT).................................................................................................. 4 3. Introduction..................................................................................................................................................... 5 3.1 SAR Definition ..................................................................................................................................... 5 4. SAR Measurement Setup.............................................................................................................................. 6 4.1 DASY E-Field Probe System............................................................................................................... 7 4.1.1 E-Field Probe Specification ................................................................................................................. 8 4.1.2 E-Field Probe Calibration process ...................................................................................................... 9 4.2 Data Acquisition Electronic (DAE) System ........................................................................................ 10 4.3 Robot ................................................................................................................................................. 10 4.4 Measurement Server......................................................................................................................... 10 4.5 Device Holder .................................................................................................................................... 11 4.6 Phantom - SAM v4.0 ......................................................................................................................... 11 4.7 Data Storage and Evaluation............................................................................................................. 12 4.7.1 Data Storage ..................................................................................................................................... 12 4.7.2 Data Evaluation ................................................................................................................................. 13 5. Tissue Simulating Liquids............................................................................................................................ 15 5.1 Ingredients......................................................................................................................................... 16 5.2 Recipes.............................................................................................................................................. 16 5.3 Liquid Depth ...................................................................................................................................... 17 6. SAR Testing with RF Transmitters................................................................................................................ 18 6.1 SAR Testing with GSM/GPRS Transmitters ...................................................................................... 18 6.2 Conducted Power .............................................................................................................................. 18 6.3 Stand-alone SAR Evaluate................................................................................................................ 19 6.3.1 SAR to peak location separation ratio (SPLSR)................................................................................ 19 6.4 SAR test reduction according to KDB ............................................................................................... 20 7. System Verification and Validation............................................................................................................... 21 7.1 Symmetric Dipoles for System Verification ....................................................................................... 21 7.2 Liquid Parameters ............................................................................................................................. 22 7.3…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 22H and 24E Test Report Product Type ： Wearable Watch Tracker Applicant ： GlobalSat WorldCom Corporation Address ： 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553 Taiwan Trade Name ： GlobalSat Model Number ： TW-100 Test Specification ： FCC 47 CFR PART 22H FCC 47 CFR PART 24E ANSI/TIA-603-D 2010 Application Purpose ： Original Receive Date ： Nov. 18, 2015 Test Period ： Nov. 23 ~ 27, 2015 Issue Date ： May 23, 2017 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C) Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. Report Number: 1511FR25-01 1 of 67 Revision History Rev. Issue Date Revisions Revised By 00 Dec. 09, 2015 Initial Issue 01 May 23, 2017Revised report information. Snow Wang Report Number: 1511FR25-01 2 of 67 Verification of Compliance Issued Date: May 23, 2017 Product Type : Wearable Watch Tracker Applicant : GlobalSat WorldCom Corporation Address : 16F., No.186, Jian 1st Rd. Zhonghe Dist., New Taipei City 23553 Taiwan Trade Name : GlobalSat Model Number : TW-100 FCC ID : RID-TW100 EUT Rated Voltage : DC 5.0V, 1.0A Test Voltage : 120 Vac / 60 Hz Applicable Standard : FCC 47 CFR PART 22H FCC 47 CFR PART 24E ANSI/TIA-603-D 2010 Application Purpose : Original Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C) Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm A Test Lab Techno Corp. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by A Test Lab Techno Corp. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved By ： Reviewed By ： (Manager) (Fly Lu) (Testing Engineer) (Eric Ou Yang) Report Number: 1511FR25-01 3 of 67 TABLE OF CONTENTS 1 General Information ......................................................................................................... 6 1.1. EUT Description ......................................................................................................... 6 1.2. Mode of Operation ...................................................................................................... 7 1.3. EUT Exercise Software .............................................................................................. 7 1.4. Configuration of Test System Details .......................................................................... 8 1.5. Test Site Environment................................................................................................. 8 1.6. Summary of Test Result ............................................................................................. 9 2 RF Output Power Test .................................................................................................... 10 2.1. Limit .......................................................................................................................... 10 2.2. Test Instruments ....................................................................................................... 10 2.3. Test Setup ................................................................................................................ 10 2.4. Test Procedure ......................................................................................................... 10 2.5. Uncertainty ............................................................................................................... 10 2.6. Test Result ................................................................................................................ 11 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test ..................... 13 3.1. Limit .......................................................................................................................... 13 3.2. Test Instruments ....................................................................................................... 13 3.3. Setup ........................................................................................................................ 14 3.4. Test Procedure ......................................................................................................... 15 3.5. Uncertainty ............................................................................................................... 15 3.6. Test Result ................................................................................................................ 16 4 Emission Bandwidth & Occupied Bandwidth Test ...................................................... 17 4.1. Limit .......................................................................................................................... 17 4.2. Test Instruments ....................................................................................................... 17 4.3. Setup ........................................................................................................................ 17 4.4. Test Procedure ......................................................................................................... 18 4.…

Text truncated - open the document above for the full version.

SAR Test Setup Photographs EUT Side Definition Mode Side 1 Front 2 Back 1 2 Report Number: 1512FS11Page 1 of 3 ©2015 A Test Lab Techno Corp. Phantom Position： Head EUT side：Front Spacing to phantom： 10 mm Accessory：N/A Report Number: 1512FS11Page 2 of 3 ©2015 A Test Lab Techno Corp. Phantom Position： Neck EUT side：Back Spacing to phantom： 0 mm Accessory：N/A Report Number: 1512FS11Page 3 of 3 ©2015 A Test Lab Techno Corp.

Part 22H & Part 24E Test Setup Photographs Radiated Emissions Test Configuration: Description: Front View of Radiated Emission Test _ Below 1GHz Description: Back View of Radiated Emission Test _ Below 1GHz A Test Lab Techno Corp. Report Number: 1511FR25-01 1 of 2 Description: Front View of Radiated Emission Test _ Above 1GHz Description: Back View of Radiated Emission Test _ Above 1GHz A Test Lab Techno Corp. Report Number: 1511FR25-01 2 of 2