RLS-STAVL1432GPS Vehicle Tracking Device

CAREU UCAN 3G User Guide Version: 0.1 Reference No.: AVL Date: 2014/8/26 SYSTEMS & TECHNOLOGY CORP. General Information If any breakdown occurs due to the operation of the described product or users’ improper handling in accordance with the instructions of the document, S&T shall be liable for the General Conditions based on the delivery of the described product and the content of the document. This product is not designed for the use of life support appliances, devices or systems and thence a malfunction of the product might reasonably be expected to make personal injury. S&T customers using or selling this product for such applications will take the risk on their own; therefore, it must be agreed S&T will be fully indemnified from any damages due to illegal use or resale. All information in this document is subject to change without notice at any time. Disclaimer The information, specification, images and photos in this user guide are subject to change without notice and without obligation to notify any person of such revision change. Copyright This user guide, including all photographs, illustrations and software, to name a few, is protected under international copyright laws, with all rights reserved. This document contains confidential, restricted and proprietary information that it has been exclusively prepared for the internal use of certain designated S&T employees, and may not be duplicated or distributed, in whole or in part, without the prior written consent of S&T’s authorized delegates. Any illegal copying and disclosure of the document are absolutely prohibited, and violators are liable to the damages caused. © Systems & Technology Corp. All Rights Reserved Table of Contents Chapter 1 Introduction ................................................................................................... 1 1.1 Features....... ........................................................................................................ 1 1.2 Scope ................................................................................................................... 1 1.3 About CAREU UCAN 3G..................................................................................... 1 1.4 Hardware Architecture ......................................................................................... 2 1.5 Related Document ............................................................................................... 2 Chapter 2 Taking a Tour of CAREU UCAN 3G ......................................................... 3 2.1 Dimensions .......................................................................................................... 3 2.2 PIN Assignment.................................................................................................... 3 Chapter 3 Getting Started with CAREU UCAN 3G................................................... 5 3.1 Hardware Installation ........................................................................................... 5 3.2 USB Device Driver Installation ............................................................................. 6 3.3 Device Configuration.......................................................................................... 12 3.4 Communication Settings .................................................................................... 16 3.5 GPS Tracking Configurations............................................................................. 17 3.6 Firmware Upgrade ............................................................................................. 18 Chapter 4 Technical Specification .............................................................................. 19 Chapter 5 Regulation.................. .............................................................................. 22 CAREU UCAN 3G - User Guide Chapter 1 1 Chapter 1 Introduction 1.1 Features Thank you for purchasing CAREU UCAN 3G GPS Vehicle Tracker, a plug-and-use device for tracking and vehicle status diagnostics. ● SMS, GPRS TCP/UDP, USSD, FTP communications ● Plug-and-use design and cost effectiveness ● DTC OBD II error codes ● GSM/GPRS simultaneously ● Real-time tracking (Time, Distance Interval or Intelligent Mode, and Heading) ● Firmware upgrade over the air (via GPRS from FTP) ● Journey report wireless download ● Battery low alert ● Geofence reports ● Mileage reports ● User-defined reports ● Up to 100,000 data logs 1.2 Scope This document will guides you to start the CAREU UCAN 3G Vehicle Tracker. However,as this document contains basic device configuration only, please see the CAREU UCAN 3G Protocol Document for the advanced information. 1.3 About CAREU UCAN 3G Designed with the latest GPS technology, the CAREU UCAN 3G delivers positioning message by GSM wireless transmission to GIS platform, and then helps back-end users proceed with the analysis and the applications of vehicle transport, management, anti-theft, security and tracking. A microcontroller can probe location and command data at regular intervals, derive actions from location, peripheral and control data, and execute such actions. Peripheral data indicates the status of various peripherals connected to and/or controlled by the device. Among the best features of the CAREU UCAN 3G Vehicle Tracker, in particular, they transmit data in ASCII mode (Intellitrac X Series compatible mode) or binary mode. CAREU UCAN 3G - User Guide 2 Chapter 1 The firmware in the device applies intelligent filtering to overcome coverage limitations for both GPS and GSM/GPRS networks. Motion sensor controls the status of the device, whether in sleep, idle or fully-powered mode, and thereby controls the amount of current consumed by the device. The device supports over-the-air firmware upgrade to deliver additional functionality without physically touching the device once installed. 1.4 Hardware Architecture As hardware is concerned, the CAREU UCAN 3G is comprised of a micro- controller, regulator, GPS rece…

Text truncated - open the document above for the full version.

Report No.: 140806C22 1 of 6 CONSTRUCTION PHOTOS OF EUT

FCC ID: RLS-STAVL1432 Bottom of EUT Label Location

Report No.: 140806C22 2 of 6 Report No.: 140806C22 3 of 6 Report No.: 140806C22 4 of 6 Report No.: 140806C22 5 of 6 Report No.: 140806C22 6 of 6

Test Laboratory: Borsigstrasse 11 Germany 7Layers AG 40880 Ratingen Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7 layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Peter Mertel USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0Vorstand  Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Dr. H. Ansorge RF Exposure and Ma ximum ERP/EIRP Assessment For SARA‐U260 GSM/UMTS Module FCC ID: XPYSARAU260 IC: 8595A‐SARAU260 Asse ssment Reference: MDE_UBLOX_1404_MPEa Assessment Reference: MDE_UBLOX_1404_MPEa Page 2 of 11 Table of Contents 0 Summary3 0.1 Technical Report Summary 3 1 Administrative Data4 1.1 Testing Laboratory 4 1.2 Project Data 4 1.3 Applicant Data 4 1.4 Manufacturer Data 4 2 Test object Data5 2.1 General EUT Description 5 2.2 EUT Main components 5 2.3 Ancillary Equipment 5 2.4 Auxiliary Equipment 5 2.5 Operating Modes 6 3 Evaluation Results7 3.1 Maximum ERP / EIRP 7 3.2 RF Exposure Evaluation for Module 8 3.3 RF Exposure Evaluation for multiple transmitters in co-location 9 Assessment Reference: MDE_UBLOX_1404_MPEa Page 4 of 11 1 Administrative Data 1.1 Testing Laboratory Company Name: 7Layers AG Address Borsigstr. 11 40880 Ratingen Germany This facility has been fully described in areport submitted to the FCC and accepted under the registration number 96716. The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D‐PL‐12140‐01‐01 Responsible for Accreditation Scope:Dipl.‐Ing. Bernhard Retka Dipl.‐Ing. Robert Machulec Dipl.‐Ing. Andreas Petz Report Template Version: 2014‐05‐15 1.2 Project Data Responsible for assessment and report:Mr. Patrick Lomax Date of Report: 2014‐05‐16 1.3 Applicant Data Company Name: u‐blox Italia S.p.A. Address: Via Stazione di Prosecco, 15 34010 Sgonico (Trieste) Italy Contact Person: Giulio Comar 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_1404_MPEa Page 5 of 11 2 Test object Data 2.1 General EUT Description Equipment under Test SARA‐U260 Module Type Designation: SARA‐U260 Kind of Device: GPRS/EDGE MSC GSM/UMTS Module GPRS Multi‐slot class 12 FCC ID: XPYSARAU260 IC Number: 8595A‐SARAU260 General product description: The EUT is Cellular radio module supporting GSM/GPRS/WCDMA/HSDPA/HSUPA 2.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment under Test Type Designation Serial No.HW StatusSW Status Date of Receipt EUT A Code: DE1015001 AA02 SARA U260 U260352252060028 89 188BA123.05 2014‐04‐16 NOTE: The short description is used to simplify the identification of the EUT in this test report. 2.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Ancillary Equipment can influence the test results. Short Description Equipment under Test Type Designation HW StatusSW StatusSerial no. FCC ID N/A ‐ 2.4 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Auxiliary Equipment can influence the test results. Short Description Equipment under Test Type Designation Serial no.HW StatusSW Status FCC ID N/A – Assessment Reference: MDE_UBLOX_1404_MPEa Page 6 of 11 2.5 Operating Modes This chapter describes the operating modes of the EUTs used for testing. Op. Mode Description of Operating ModesRemarks Op‐mode 1 EUT transmitting in standalone configurationAntenna‐to‐person distance > 20cm Op‐mode 2 EUT transmitting in co‐location with hypothetical Bluetooth radio where the separation distance between co‐located transmitter’s antennas is < 20cm. Antenna‐to‐person distance > 20cm Op‐mode 3 EUT transmitting in co‐location with hypothetical WLAN radio where the separation distance between co‐located transmitter’s antennas is < 20cm. Antenna‐to‐person distance > 20cm Op‐mode 4 EUT transmitting in co‐location with hypothetical Bluetooth and WLAN radios where the separation distance between co‐located transmitter’s antennas is < 20cm. Antenna‐to‐person distance > 20cm Assessment Reference: MDE_UBLOX_1404_MPEa Page 7 of 11 3 Evaluation Results 3.1 Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 (850MHZ GSM/GPRS) (FDD5 WCDMA/HSUPA/HSDPA) IC SRSP‐503 Issue 7, September 2008 (850MHZ GSM/GPRS) (FDD5 WCDMA/HSUPA/HSDPA) FCC 47 CFR §24.232 (1900MHZ GSM/GPRS) (FDD2 WCDMA/HSUPA/HSDPA) IC SRSP‐510 Issue 5, February 2009 (1900MHZ GSM/GPRS) (FDD2 WCDMA/HSUPA/HSDPA) 3.1.1 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP‐503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7 Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent ERIP value of 11.5 Watts. For the 1900MHz band, FCC §24.232 and IC SRSP‐510 Issue 5 states that the maximum EIRP of this device shall not exceed 2 Watts. 3.1.2 Test Protocol Maximum antenna gain to comply with EIRP limits for FCC and Industry Canada Band Mode Frequency (MHZ) Maximum Conducted output power (dBm) * Maximum Co…

Text truncated - open the document above for the full version.

FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 1 of 7 Report No. : SA140806C22 Issued Date : Dec. 23, 2014 FCC MPE Evaluation Report Report No. : SA140806C22 Applicant : SYSTEMS & TECHNOLOGY CORP. Address : 18F-5, No.79, Hsin Tai Wu Road, Sec. 1, Hsichih, New Taipei City, Taiwan, R.O.C. Product : GPS Vehicle Tracking Device Brand : CAREU Model No. : UCAN 3G Standards : FCC Part 2 (Section 2.1091) KDB 447498 D01 Sample Received Date : Aug. 06, 2014 Date of Evaluation : Dec. 18, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 2 of 7 Report No. : SA140806C22 Issued Date : Dec. 23, 2014 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Description of Equipment Under Test ................................................................................................................................. 4 2. MPE (Maximum Permissible Exposure) Assessment ......................................................................................................... 5 2.1 Introduction .................................................................................................................................................................. 5 2.2 RF Radiation Exposure Limits ...................................................................................................................................... 5 2.3 MPE Assessment Method ............................................................................................................................................ 6 2.4 MPE Calculation for Standalone Operations ................................................................................................................ 6 3. Information on the Testing Laboratories ............................................................................................................................. 7 FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 3 of 7 Report No. : SA140806C22 Issued Date : Dec. 23, 2014 Release Control Record Report No. Reason for Change Date Issued SA140806C22 Initial release Dec. 23, 2014 FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 4 of 7 Report No. : SA140806C22 Issued Date : Dec. 23, 2014 1.Description of Equipment Under Test EUT Type GPS Vehicle Tracking Device Brand Name CAREU Model Name UCAN 3G Tx Frequency Bands (Unit: MHz) GSM850 : 824.2 ~ 848.8 GSM1900 : 1850.2 ~ 1909.8 WCDMA Band II : 1852.4 ~ 1907.6 WCDMA Band V : 826.4 ~ 846.6 Uplink Modulations GSM & GPRS : GMSK EDGE : 8PSK WCDMA : QPSK Antenna Type Fixed Internal Antenna EUT Stage Production Unit Note: 1.The above EUT information is declared by manufacturer and for more detailed features description please refers to the manufacturer's specifications or User's Manual. List of Accessory: Battery 1 Brand Name AE energy Model Name AE382030P Power Rating 3.7Vdc, 130mAh Type Li-ion Battery 2 Brand Name SYNergy Model Name AHB372026PS Power Rating 3.7Vdc, 145mAh Type Li-ion 3G Module Brand Name u blox Model Name SARA-U260 FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 5 of 7 Report No. : SA140806C22 Issued Date : Dec. 23, 2014 2. MPE (Maximum Permissible Exposure) Assessment 2.1 Introduction According to 47 CFR §2.1091, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitting antenna and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer,…

Text truncated - open the document above for the full version.

Final Report on SARA-U260 FCC ID: XPYSARAU260 IC:8595A-SARAU260 MDE_UBLOX_1404_FCCaReport Reference: Ma y 20, 2014Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board:Düsseldorf, HRB 44096 40 880 Ratingen, Germany Peter Mertel USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0Vorstand  Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Dr. H. Ansorge According to: FCC Part 22, Subpart H and FCC Part 24, Subpart E Reference: MDE_UBLOX_1404_FCCa 1Administrative Data 1.1Project Data Patrick LomaxPro ject Responsible: 2014/05/20Date Of Test Re port: 2014/04/23Date of first test: 2014/05/08Date of last test: 1.2Applicant Data Company Name:u-blox Italia S.p.A. Via Stazione di Prosecco, 15 34010 Sgonico (Trieste) Street: ItalyCountry: Contact Person:Giulio Comar Wireless Products CertificationFunction: Wireless R&D centerDepartment: +39 040 2529 400Phone: +39 040 2529 394Fax: [email protected]: 1.3Test Laboratory Data The following list shows all places and laboratories involved for test result generation: 7 layers DE Company Name :7 layers AG Street :Borsigstrasse 11 City :40880 Ratingen Country :Germany Contact Person :Mr. Michael Albert Phone :+49 2102 749 201 Fax :+49 2102 749 444 E Mail :[email protected] Laboratory Details Accreditation InfoLab IDIdentificationResponsible DAkkS-Registration no. D-PL-12140-01-01Radiated EmissionsLab 1Mr. Robert Machulec Mr. Andreas Petz DAkkS-Registration no. D-PL-12140-01-01Radio LabLab 2Mr. Robert Machulec Mr. Andreas Petz 1.4Signature of the Testing Responsible Patrick Lomax responsible for tests performed in: Lab 1, Lab 2 Page 2 of 104 Reference: MDE_UBLOX_1404_FCCa 2.2Detailed Description of OUT Samples Sample : AH02 OUT IdentifierSARA-U260 Sample DescriptionProtocol Sample Serial No.352253060002929 HW Status188BA1 SW Status23.05 Date of Receipt2014/04/16 Low VoltageLow Temp.3.3 V-20 °C High Temp.High Voltage4.4 V55 °C Normal Temp.Nominal Voltage3.8 V25 °C 2.3OUT Features Features for OUT: SARA-U260 Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 ACThe OUT is powered by or connected to AC Mains Dantremovable antenna supplied and type tested with the radio equipment, designed as an example part of the equipment EDGE850EUT supports EDGE in the band 824 MHz - 849 MHz EDGE1900EUT supports EDGE in the band 1850 MHz - 1910 MHz FDD2EUT supports UMTS FDD2 in the band 1850 MHz - 1910 MHz FDD5EUT supports UMTS FDD5 in the band 824 MHz - 849 MHz GSM850EUT supports GSM850 band 824MHz - 849MHz HSDPA- FDD2 EUT supports UMTS FDD2 HSDPA in the band 1850 MHz - 1910 MHz HSDPA- FDD5 EUT supports UMTS FDD5 HSDPA in the band 824 MHz - 849 MHz HSUPA- FDD2 EUT supports UMTS FDD2 HSUPA in the band 1850 MHz - 1910 MHz HSUPA- FDD5 EUT supports UMTS FDD5 HSUPA in the band 824 MHz - 849 MHz PantCpermanent fixed antenna connector, which may be built-in, designed as an indispensable part of the equipment PCS1900EUT supports PCS1900 band 1850MHz - 1910MHz Page 4 of 104 Reference: MDE_UBLOX_1404_FCCa 2.4Auxiliary Equipment AE No.Serial No.SW StatusHW StatusDescriptionType Designation AE USBca1USB cable AE HaFr1tbd.Handsfree headset AE ACDC1UUX324-1215E01-0103700120V/60HZ ACAC/DC adapter 2.5Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No.List of OUT samplesList of auxiliary equipment S_AH02 AH02Protocol SampleSample: S_AH02_RSE (RSE setup with ah02 and AC/DC adapter, headset and USB-cable) AE HaFr1Handsfree headsetAH02Protocol SampleSample: AE USBca1USB cable AE ACDC1AC/DC adapter 3Results 3.1General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: 1. This report contains the abbreviated information content pertaining to services rendered. Supporting documentation not included herein is maintained and available at the laboratory. 2. All tests are performed under environmental conditions within the requirements of the specifications. Environmental conditions are available at the laboratory. Note: Page 5 of 104 Reference: MDE_UBLOX_1404_FCCa 3.2List of the Applicable Body (Bodies for Scope: FCC_v2) DesignationDescription Part 22, Subpart H - Cellular Radiotelephone ServiceFCC47CFRChIPART22PUBLIC MOBILE SERVICES Part 24, Subpart E - Broadband PCSFCC47CFRChIPART24PERSONAL COMMUNICATIONS SERVICES 3.3List of Test Specification Test Specification:FCC part 2 and 22 Version10-1-12 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 22 - PUBLIC MOBILE SERVICES Test Specification:FCC part 2 and 24 Version10-1-12 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 24 - PERSONAL COMMUNICATIONS SERVICES Page 6 of 104 Reference: MDE_UBLOX_1404_FCCa 3.4Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab Test Specification: FCC part 2 and 22 22.1 RF Power Output §2.1046, §22.913 22.1; Frequency Band = 850 / FDD52014/05/07S_AH02Lab 2Passed 22.2 Frequency stability §2.1055 22.2; Frequency Ban…

Text truncated - open the document above for the full version.

Report No.: RF140806C22 1 of 22 Report Format Version 5.0.0 PARTIAL FCC TEST REPORT (PART 22) REPORT NO.: RF140806C22 MODEL NO.: UCAN 3G FCC ID: RLS-STAVL1432 RECEIVED: Aug. 06, 2014 TESTED: Jan. 15, 2015 ISSUED: Jan. 16, 2015 APPLICANT: SYSTEMS & TECHNOLOGY CORP. ADDRESS: 18-5F, No.79, Hsin Tai Wu Road, Sec. 1, Hsichih District, New Taipei City, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140806C22 2 of 22 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 3 1 CERTIFICATION ................................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ........................................................................................................... 5 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 5 2.2 TEST SITE AND INSTRUMENTS ................................................................................................. 6 3 GENERAL INFORMATION ................................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................................................... 8 3.4 TEST ITEM AND TEST CONFIGURATION .................................................................................. 9 3.5 EUT OPERATING CONDITIONS .................................................................................................. 9 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................... 9 4 TEST TYPES AND RESULTS ............................................................................................................. 10 4.1 OUTPUT POWER MEASUREMENT .......................................................................................... 10 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ............................................................. 10 4.1.2 TEST PROCEDURES ....................................................................................................... 10 4.1.3 TEST SETUP .................................................................................................................... 10 4.1.4 TEST RESULTS ................................................................................................................ 11 4.2 RADIATED POWER ERP CALCULATION .................................................................................. 12 4.3 RADIATED EMISSION MEASUREMENT ................................................................................... 12 4.3.1 LIMITS OF RADIATED EMISSION MEASUREMENT ...................................................... 12 4.3.2 TEST PROCEDURES ....................................................................................................... 12 4.3.3 DEVIATION FROM TEST STANDARD ............................................................................. 12 4.3.4 TEST SETUP .................................................................................................................... 13 4.3.5 TEST RESULTS ................................................................................................................ 14 5 PHOTOGRAPHS OF THE TEST CONFIGURATION ......................................................................... 20 6 INFORMATION ON THE TESTING LABORATORIES ....................................................................... 21 7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ....................................................................................................................…

Text truncated - open the document above for the full version.