ROR0010Radio Transceiver Transmitter

BLINQ NETWORKS INC. NON-DISCLOSURE AGREEMENT (Mutual) 2020 THIS AGREEMENT is entered into, by and between BliNQ Networks Inc., 140 Renfrew Dr., Suite 200, Markham, ON Canada (“BliNQ”) and _____________________ (“Company”), with offices at ________________________________________________________(“Company”). As BliNQ and Company recognizes that there is a need to disclose to each other certain confidential information, and to provide for mutual agreements to protect such confidential matters, BliNQ and Company agree as follows: • Information in writing (orally disclosed material must be summarized within thirty (30) days of disclosure in writing) designated as “Confidential” or “Proprietary,” including, but not limited to, product planning information, product specifications, user manuals, internal product photos and other proprietary and trade secret business and technical information, shall be held in strictest confidence and not disclosed to any third parties. BliNQ and Company mutually agree they may disclose such information to responsible employees with a bona fide need to know, provided all such employees are instructed not to disclose such information to third parties. Each party agrees to exercise reasonable care, consistent with its protection of its own confidential information, to prevent such use or disclosure to third parties. • Each party shall not use this information for any commercial purpose other than for general product planning purposes without the prior written permission of the other party. • Information shall not be deemed confidential and the receiving party shall have no obligation regarding any information which is already known to the receiving party at the time it is disclosed, is or becomes publicly known through no wrongful act of the receiving party, is rightfully received from a third party without restriction on disclosure and without breach of this Agreement, is independently developed by the receiving party, is furnished to a third party by the disclosing party without similar restriction on disclosure, or is disclosed pursuant to a requirement of a government agency, court order, or otherwise by law. • All confidential information shall remain the property of the disclosing party, and upon written request of either party, the other party shall return all confidential information disclosed and all copies thereof. Nothing contained in this agreement shall be construed as granting any rights, by license or otherwise, to any confidential information disclosed. All confidential information is provided “as is.” Each party makes no warranties, express, implied, or otherwise, regarding its accuracy, completeness or performance. • This agreement shall not be assignable by either party without the written consent of the other party. This document constitutes the entire agreement between the parties with respect to disclosure of confidential information, and shall supersede all previous communications, representations, understandings and agreements, either oral or written, between the parties or any official or representative thereof. Any changes to this agreement must be in writing and signed by authorized principals on both sides. • Unless earlier terminated by written agreement of both parties, this agreement shall remain in effect for five (5) years from the date as executed below by duly authorized representatives. • The laws of the Province of Ontario, Canada shall govern this agreement, without reference to conflict of law principles, and shall be effective on the last of the dates indicated below. BliNQ Networks Inc. _______________________________________ Signed: ________________________________ Signed: __________________________________ Name: _________________________________ Name: ___________________________________ Title: __________________________________ Title: _____________________________________ Date: __________________________________ Date: _____________________________________

50.802.00 25.401.00 R2.00.08 TYP. SEE NOTE 4 B01 5. NOTES: DIMENSIONS IN DUAL UNITS MILLIMETERS [INCHES]. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1. 1994. ZEBRA WHITE LABEL ROLL SPEC:2. - TYPE: ZEBRA Z-ULTIMATE 3000T - SIZE: 2.0" W X 1.0" L - PART NUMBER: 10011697 - QTY: 5570 LABELS PER ROLL 3. ZEBRA RESIN RIBBON SPEC:3. - TYPE: 5095 HIGH-PERFORMANCE - SIZE: 2.36" X 1476', (60mm X 450m) - PART NUMBER: 05095BK06045 "XXXXXX" IN "MADE IN XXXXXX" REFERS TO COUNTRY OF ORIGIN, E.G. CHINA / CANADA.4. SERIAL NUMBER FORMAT EXPLAINED:5. F30C- FW300i-B48-46-HP-NA YY - YEAR WW - WEEK NNNN - NUMBER B01 REVISIONS REV.DESCRIPTIONDATEAPPROVED A01INITIAL DRAWING RELEASE2020-10-13BM B01SN FORMAT CHANGED2021-01-26BM PART NUMBER REVISION SN/MAC LABEL 1 OF 1 SHEET TECH AUTH DESIGNER CHECKED BY DRAWN BY DATE DATE DATE 2/5/2021 PROPRIETARY AND CONFIDENTIAL BQF00339 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF . ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF IS PROHIBITED. SIZE B DIMENSIONS ARE IN mm TOLERANCES: FRACTIONAL 0.5 ANGULAR: MACH 0.5 NONE 0.5 .X 0.4 .XX 0.3 .XXX 0.15 UNLESS OTHERWISE SPECIFIED TOLERANCES SCALE DATE YZ/ZX B01 12 34 87 65 A B C D 2:1 FW300i-B48-46-HP-NA

50.802.00 31.751.25 R2.00.08 TYP. NOTES: 1. DIMENSIONS IN DUAL UNITS MILLIMETERS [INCHES]. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1994. 2. ZEBRA WHITE LABEL ROLL SPEC: - TYPE: ZEBRA Z-ULTIMATE 3000T - ZEBRA PART NUMBER: 10011698 - SIZE: 2.0" W X 1.25" L - QTY: 4270 LABELS PER ROLL 3. ZEBRA RESIN RIBBON SPEC: - TYPE: 5095 HIGH-PERFORMANCE - SIZE: 2.36" X 1476', (60mm X 450m) - PART NUMBER: 05095BK06045 B01 REVISIONS REV.DESCRIPTIONDATEAPPROVED A01INTIAL DRAWING RELEASE2020-10-13BM B01ADDED FCC ID NUMBER2021-04-22BM PART NUMBER REVISION 1 OF 1 SHEET TECH AUTH DESIGNER CHECKED BY DRAWN BY DATE DATE DATE 4/22/2021 PROPRIETARY AND CONFIDENTIAL BQF00340 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF . ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF IS PROHIBITED. SIZE B DIMENSIONS ARE IN mm TOLERANCES: FRACTIONAL 0.5 ANGULAR: MACH 0.5 NONE 0.5 .X 0.4 .XX 0.3 .XXX 0.15 UNLESS OTHERWISE SPECIFIED TOLERANCES SCALE DATE YZ/BM B01 12 34 87 65 A B C D 2:1 FW300i-B48-46-HP-NA LICENSE LABEL

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:33.9dBm Maximum peak output power at antenna input terminal:2449.1mW Antenna gain(maximum):17dBi Maximum antenna gain:50.1numeric Time Averaging:100% Prediction distance:1100cm Prediction frequency:3700MHz FCC MPE limit for uncontrolled exposure at prediction frequency:1.00 mW/cm 2 IC MPE limit for uncontrolled exposure at prediction frequency:7.19 W/m 2 Power density at prediction frequency:0.01 mW/cm 2 This equates to:0.08 W/m 2 2 4R PG S  = PWR in dBm Ant. gain in dBi Use the duty cyclefrom test report or 100% Separation distance fromantenna to user in cm. Freq. in MHz

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The SCC Accreditation Symbol is an official symbol of the Standards Council of Canada, used under licence. SCC File Number: 15064 (Ottawa/Almonte); 151100 (Montreal); 151097 (Cambridge) FCC 15.407, RSS-247 UNII1; Date: August 2020 Choose Scandinavian trust RADIO TEST REPORT – 425119-2TRFWL Type of assessment: Final product testing Applicant: Product: Blinq Wireless, Inc Base station Model: FW300i-B48-46-HP-NA FCC ID: ROR0010 Specification: FCC 47 CFR Part 15 Subpart E, §15.407 Date of issue: May 19, 2021 Fahar Abdul Sukkoor, Wireless/EMC Specialist Tested by Signature Andrey Adelberg, Senior EMC/RF Specialist Reviewed by Signature Report reference ID: 425119-2TRFWL Page 2 of 44 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Test site identifier Organization Ottawa/Almonte Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 425119-2TRFWL Page 3 of 44 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Test conditions ................................................................................................................................................................................... 6 3.1 Atmospheric conditions ............................................................................................................................................................................................ 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Measurement uncertainty .................................................................................................................................................................. 7 4.1 Uncertainty of measurement ................................................................................................................................................................................... 7 Information provided by the applicant ...................................................................................................................................…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The SCC Accreditation Symbol is an official symbol of the Standards Council of Canada, used under licence. SCC File Number: 15064 (Ottawa/Almonte); 151100 (Montreal); 151097 (Cambridge) FCC 15.407, RSS-247 UNII-3; Date: August 2020 Choose Scandinavian trust RADIO TEST REPORT – 425119-3TRFWL Type of assessment: Final product testing Applicant: Product: Blinq Wireless, Inc. Base station Model: FW300i-B48-46-HP-NA FCC ID: ROR0010 Specification: FCC 47 CFR Part 15 Subpart E, §15.407 Date of issue: May 19, 2021 Fahar Abdul Sukkoor, Wireless/EMC Specialist Tested by Signature Andrey Adelberg, Senior EMC/RF Specialist Reviewed by Signature Report reference ID: 425119-3TRFWL Page 2 of 49 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Test site identifier Organization Ottawa/Almonte Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 425119-3TRFWL Page 3 of 49 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Test conditions ................................................................................................................................................................................... 6 3.1 Atmospheric conditions ............................................................................................................................................................................................ 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Measurement uncertainty .................................................................................................................................................................. 7 4.1 Uncertainty of measurement ................................................................................................................................................................................... 7 Information provided by the applicant .................................................................................................................................…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The SCC Accreditation Symbol is an official symbol of the Standards Council of Canada, used under licence. SCC File Number: 15064 (Ottawa/Almonte); 151100 (Montreal); 151097 (Cambridge) FCC 15.209 and RSS-GEN.docx; Date: Nov 2017 MRA il ac Choose Scandinavian trust Wireless test report – 425119-4TRFWL Type of assessment: Transmitters co-location Applicant: Blinq Wireless, Inc Product name: Base station Model: FW300i-B48-46-HP-NA FCC ID: ROR0010 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.407 Unlicensed National Information Infrastructure Devices – General technical requirements  FCC 47 CFR Part 96 Citizens Broadband Radio Service Date of issue: May 19, 2021 Test engineer(s): Fahar A Sukkoor, Wireless/EMC Specialist Signature: Reviewed by: Andrey Adelberg, Senior Wireless/EMC Specialist Signature: Report reference ID: 425119-4TRFWL Page 2 of 17 Test location(s) Company name Nemko Canada Inc. Facilities Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site registration Organization Recognition numbers and location FCC/ISED CA2040 (Ottawa/Almonte); CA2041 (Montreal); CA0101 (Cambridge) Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 425119-4TRFWL Page 3 of 17 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Test methods ............................................................................................................................................................................................................ 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Exclusions ................................................................................................................................................................................................................. 4 1.6 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart C, general requirements test results ........................................................................................................................................ 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 Co-location test plan ................................................................................................................................................................................................ 6 3.5 EUT exercise details .................................................................................................................................................................................................. 7 3.6 EUT setup diagram ..........................................................................................................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 4 Section 1. Setup photos 1.1 Radiated Front view Setup photos NEX-425119 Page 2 of 4 1.2 Radiated back view Page 3 of 4 1.3 Conducted emissions Page 4 of 4 1.4 Frequency Stability End of Test report