ROR2004WIFI 7 Expansion module

WIFI-5G-A Wi-Fi Antenna Report © Copyright 2024 BLINQ Networks RESTRICTED USE AND DUPLICATION All rights reserved. The information contained in this document is the property of BLINQ Networks. Unless specifically authorized in writing by BLINQ Networks, the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. This document is intended for limited circulation to provide preliminary information and to promote discussion. As such, the information contained in this document is subject to change without notice and should not be construed as a commitment by BLINQ Networks. BLINQ Networks reserves the right to make changes in design or components as progress in engineering and manufacturing may warrant. Issue 01 | 2 Restricted Use and Duplication Table of Contents Table of Contents ................................................................................................................................................................................................................................ 2 1. Introduction ......................................................................................................................................................................................................................... 3 2. Antenna Report – Wi-Fi technology .......................................................................................................................................................................... 4 Issue 01 | 3 Restricted Use and Duplication 1. Introduction The present Wi-Fi Antenna Report applies to: • Product ID: PC FCC ID: ROR2004, IC: 34658-CPC1001 Issue 01 | 4 Restricted Use and Duplication 2. Antenna Report – Wi-Fi technology Antenna Designed by: COMMUNICATION COMPONENTS ANTENNA RESEARCH 88 HINES ROAD KANATA, ON K2K 2T8 Canada Mechanical Design by: BLiNQ Networks 140 Renfrew Drive Markham, ON L3R 6B3 Canada The WIFI7-5G-A is using a BLiNQ – CCAI proprietary Wi-Fi Antenna design. It is a stamped metal antenna. Considering the requirement of Wi-Fi RF needs, output transmitting power, path loss, and mounting/deployment scenarios, 2Patch and 4Patch antennas are selected for 2.4GHz, 5 GHz & 6 GHz respectively. Below is the performance summary of the antennas. The return loss of all 3 types of antenna elements is maintained below -10dB throughout the operating band for better impedance matching. TABLE 1 WI-FI TECHNOLOGY – ANTENNA CHARACTERISTICS WIFI Antennas by CCAI Frequency 2.4-2.5Ghz 5.15-5.925Ghz 5.925-7.125Ghz Gain Peak (dBi) 10.4 13.9 13.6 Gain Average (dBi) 10.3 13.5 13.3 AZ BW(5dB) 101 88 91 EL BW(5dB) 40 21 20 EDT(°) 0 0 0 FBR min @ 180 deg(dB) 20 20 20 FSLL avg (dB) -15.9 -16.6 -17.4 Isolation min [dB] 25 19 22 VSWR <1.5:1 <1.7:1 <1.5:1 Input Power(W) 50 50 50 Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Input Impedance 50 Ohms 50 Ohms 50 Ohms Lightning Protection Through the overall mechanical product design Issue 01 | 5 Restricted Use and Duplication FIGURE 1 WIFI7-5G-A ANTENNA REPORT - WIFI ACCESS TECHNOLOGY FIGURE 2 WI-FI 2.4GHZ RADIATION PATTERNS FOR AZIMUTH AND ELEVATION PLANE Issue 01 | 6 Restricted Use and Duplication FIGURE 3 WI-FI 5GHZ RADIATION PATTERNS FOR AZIMUTH AND ELEVATION PLANE FIGURE 4 WI-FI 6GHZ RADIATION PATTERNS FOR AZIMUTH AND ELEVATION PLANE

R1.04 0.00 12.7.50 0 .00 38.1 1.50 Arial, Bold Font Size 7 (1.798 mm) Arial, Bold, Sentence Case Font Size 6 (1.541 mm) A05 FCC ID: ROR2003 Contains FCC ID: ROR2004 FCC ID: ROR2003 Contains FCC ID: ROR2004 NOTES: 1. DIMENSIONS IN DUAL UNITS MILLIMETERS [INCHES]. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1994. 2. ZEBRA WHITE LABEL ROLL SPEC: - TYPE: ZEBRA Z-ULTIMATE 3000T - ZEBRA PART NUMBER: 10011693 - SIZE: 1.5" W X 0.5" L - QTY: 9420 LABELS PER ROLL 3. ZEBRA RESIN RIBBON SPEC: - TYPE: 5095 HIGH-PERFORMANCE - SIZE: 2.36" X 1476', (60mm X 450m) - PART NUMBER: 05095BK06045 4. ALL TEXT TO BE BLACK AND LOCATED APPROXIMATELY AS SHOWN. 5. ANY DEVIATION FOR THE TEXT FONT TYPE / SIZE DEFINED ON THIS DRAWING IS PERMISSIBLE ONLY WITH BLINQ ENGINEERING APPROVAL. CLEAR LABEL VIEW WITHOUT NOTES AND DIMENSIONS 803314 803314 REVISIONS REV.DESCRIPTIONDATEAPPROVED A01INITIAL DRAWING RELEASE2025-01-24BM A02FONT CHANGED, ADDED CONTENT2025-09-17BM/JD A03ADDED SGS LOGO + CONTRACT N.2025-11-17BM/JD A04CHANGED FCCID NUMBER2025-12-05BM/JD A05ADDED CE LOGO2025-12-17BM/JD PART NUMBERREVISION REGULATORY LABEL, PCW-400-35, POE 1 OF 1 SHEET TECH AUTH DESIGNER CHECKED BY DRAWN BY DATE DATE DATE 2025-12-17 PROPRIETARY AND CONFIDENTIAL BQF00595 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF . ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF IS PROHIBITED. SIZE B DIMENSIONS ARE IN TOLERANCES: FRACTIONAL ANGULAR: MACH 0.5 NONE 0.5 .X 0.3 .XX 0.2 .XXX 0.1 UNLESS OTHERWISE SPECIFIED TOLERANCES SCALE DATE FTH/YZ/BM A05 12 34 87 65 A B C D 1:1

* The agent’s name must exactly match the primary contact person listed in the FRN registration details. ** The Agent FRN may be the same as the applicant’s if the agent and the applicant are the same U.S.-based legal entity. Dated: December 15, 2025 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada U.S. Agent Designation for Service of Process Attestation Letter FCC ID: ROR2004 Applicant FRN: 0022440390 This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent for Service of Process for the equipment under application: U.S. Agent for Service of Process: • Company Name: Communication Components Inc. • Physical U.S. Company Address: 89 Leuning Street, South Hackensack New Jersey 07606 • Agent Name*: Dennis Nathan • Agent Email Address: [email protected] • Agent FRN**: 0006034995 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: • Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. • The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant) Signed: Signed: Printed name: Jim Dickerman Printed name: Dennis Nathan Title: Vice President Title: President Company Name: BLiNQ Networks Inc. Company Name: Communication Components Inc. Phone: 416 214-4204 Phone: 201 342-3338 Email: [email protected] Email: [email protected]

Dated: October 8, 2025 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti- Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Agency agreement expiration date: October 6, 2026 *Up to 12 months Sincerely, Signature: Name: Jim DIckerman Title: VP Operations Company: BLiNQ Networks Inc. Address: 140 Renfrew Drive Suite 200 Phone: 416 214-4204 Email: [email protected]

BLiNQ CONFIDENTIAL Rev. 01/25/2023 Page 1 of 3 EFFECTIVE DATE: ______________ NUMBER: blinqnda20250626 NON-DISCLOSURE AGREEMENT This Non-Disclosure Agreement (“Agreement”) is effective as of the date indicated above, between BLiNQ Networks Inc. and its Affiliates ("BLiNQ"), and the person or company identified as the Participant below and its Affiliates (the "Participant"), each a “Party” and together referred to as the “Parties”. THE PARTIES AGREE AS FOLLOWS: 1. Definitions. 1.1 “Affiliate” means any entity that Controls, is controlled by, or is under common Control with BLiNQ or the Participant identified below. “Control” means direct or indirect ownership, through one or more intermediaries of more than 50% of an entity’s voting capital or other voting rights. 1.2 “Confidential Information” means the confidential, proprietary, and trade secret information of the disclosing Party to be disclosed by the disclosing Party under this Agreement, and comprises: (A) information in tangible form that (1) bears a Confidentiality Legend, or (2) does not bear any Confidentiality Legend, if the receiving Party knew, or reasonably should have known under the circumstances, that the information was confidential and had been communicated to it in confidence, and (B) discussions about that information that may occur before, at the same time, or after disclosure of the information. 1.3 “Confidentiality Legend” means a “confidential,” “proprietary,” “secret,” or similar legend. 1.4 "Covered Persons" means employees, contingent workers, and professional advisers of a Party and that Party’s Affiliates. 2. Obligations of Disclosing Party. The disclosing Party will make reasonable efforts to mark its Confidential Information in tangible form with a Confidentiality Legend before disclosure. 3. Obligations of Receiving Party. The receiving Party must: 3.1 maintain the confidentiality of the Confidential Information with at least the same degree of care that it uses to protect its own confidential and proprietary information, but no less than a reasonable degree of care under the circumstances; 3.2 disclose any Confidential Information only to the receiving Party’s Affiliates and Covered Persons who have a need to know and who have agreed in writing to abide by nondisclosure terms at least as comprehensive as those in this Agreement. Each Party will be liable for breaches of this Agreement by its Affiliates and Covered Persons; 3.3 not disclose any confidential information to any other third party; and 3.4 not make any copies of the Confidential Information except copies that are necessary for the receiving Party’s disclosures under Section 3.2. The receiving Party will identify any copies as originating from the disclosing Party and retain any existing Confidentiality Legends on the copies. 3.5 upon request by the Disclosing Party, or after the termination of this Agreement, the Receiving Party shall promptly return or destroy, in a reasonably secure manner, all Confidential Information of the Disclosing Party received under this Agreement, and any copies or extracts thereof. The foregoing notwithstanding, the Receiving Party will not be required to delete Confidential Information held electronically in archive or back- up systems in accordance with general systems archiving or backup policies, on condition that the Receiving Party agrees to abide by the terms of this Agreement in protection of the remaining information. This Article 3 shall survive termination of this Agreement. 4. Duration of the Obligation of Confidentiality. Subject to the exceptions in Section 5, the confidentiality obligations in this Agreement will bind the receiving Party for each disclosure for five years from the receipt of Confidential Information. BLiNQ CONFIDENTIAL Rev. 01/25/2023 Page 2 of 3 5. Exceptions to the Obligation of Confidentiality. The receiving Party will not be liable for the disclosure of any Confidential Information that is: 5.1 generally made available publicly or to third parties by the disclosing Party without restriction on disclosure; 5.2 received without any obligation of confidentiality from a third party who rightfully had possession of the information; 5.3 rightfully known to the receiving Party without any limitation on disclosure, before its receipt from the disclosing Party; 5.4 the same as information that is independently developed by Covered Persons of the receiving Party; or 5.5 required to be disclosed under applicable laws, regulations, or court, judicial, or government agency orders. The receiving Party must give the disclosing Party reasonable notice, to the extent allowable by law, before this disclosure, and seek a protective order, confidential treatment, or other remedy, if available, to limit the scope of the required disclosure. 6. Title. Title or the right to possess Confidential Information as between the Parties will remain in the disclosing Party. 7. No Obligation of Disclosure; Termination. Neither Party has any obligation to disclose Confidential Information to the other under this Agreement. Either Party may terminate this Agreement at any time without cause by giving written notice to the other Party. Each Party’s obligations concerning Confidential Information disclosed during the term of this Agreement will survive any termination as provided in Section 4. 8. General. 8.1 Injunctive Relief. The Receiving Party agrees and acknowledges that any breach of this Agreement would cause the Disclosing Party irreparable harm for which monetary damages would be inadequate. Accordingly, the Disclosing Party will be entitled to seek injunctive or other equitable relief to remedy any threatened or actual breach of this Agreement. 8.2 Independent Parties; No Obligation to Buy or Sell. This Agreement does not create a joint venture, partnership, or other form of business association between the Parties, or any obligation to buy or sell products using or incorporating the Confidential Informati…

Text truncated - open the document above for the full version.

Dated: December 15, 2025 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Confidentiality Request Letter – FCC FCC ID: ROR2004 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. Long Term Confidentiality (LTC) request We request the exhibits selected below as long term confidential be withheld from public view permanently: Selection Exhibit name ☒ Block Diagrams ☒ Operation Description / Theory of Operation ☒ Parts List & Placement / BOM ☒ Schematics ☐ Tune-Up Procedure (for Licensed equipment only) Short Term Confidentiality (STC) request We also request the exhibits selected below as short term confidential be withheld from public view for a period of 90 days 1 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection 2 Exhibit name ☐ User’s Manual ☐ Internal Photos ☐ External Photos ☐ Test Setup Photos ☐ Tune-Up Procedure (for Licensed equipment only) Justification for Confidentiality The development of this product represents a significant investment and a strategic competitive differentiator for our company. Unrestricted public access to its design specifics would negate this hard-earned advantage, leading to considerable financial hardship. In the event of market introduction before the designated short-term confidentiality period expires, the grantee will notify the TCB to ensure timely release of the confidential information on the FCC equipment authorization website. The content herein contains trade secrets and proprietary information not typically released to the public. Disclosure of this information could severely impact the applicant and provide an unfair advantage to competitors. The Applicant acknowledges that, under Rule 0.457(d)(1)(ii), this Application and all associated materials will not be disclosed before the Grant date. 1 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 2 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request. Sincerely, Signature: Name: Jim Dickerman Title: VP Operations Company: BLiNQ Networks Inc Address: 140 Renfrew Drive Suite 200 Phone: 416 214-4204 Email: [email protected]

Dated: December 18, 2025 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Special Confidentiality – FCC FCC ID: ROR2004 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection 1 Exhibit name ☒ User’s Manual ☒ Internal Photos Our user manual contains proprietary technical content intended exclusively for professional technicians operating under a Non-Disclosure Agreement (NDA). Distribution or sale of the manual must be contingent upon the recipient’s agreement to an NDA that strictly prohibits the disclosure of its contents. Furthermore, the device’s internal circuitry and components are not accessible to end users and are designed to be serviced solely by authorized technicians under NDA. All product sales must be governed by an NDA that protects proprietary information, including internal photographs. A sample NDA is included with this application. Our company has made substantial investments in the development of this innovative product, which represents a first-of-its-kind solution in the industry. Public disclosure of the technical details would compromise our competitive edge and could result in significant financial harm. Safeguarding the confidentiality of our design is critical to protecting our intellectual property. The information provided includes trade secrets and proprietary data not customarily disclosed to the public. Unauthorized disclosure could adversely impact our business and provide competitors with an unfair advantage. Sincerely, Signature: Name: Jim Dickerman Title: VP Operations Company: BLiNQ Networks Inc. Address: 140 Renfrew Drive Suite 200 Phone: 416 214-4204 Email: [email protected] 1 - These items require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and review section II, 3) regarding specific information (NDA) that must accompany these requests.

Dated: 19 December 2025 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Limited Modular Approval FCC ID: ROR2004 The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (1) The radio elements must have its own radio frequency circuitry shielded. The physical crystal and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module contains multiple metal shields which covers RF components and circuitry. The shields are located on the top of the board next to antenna connector. The module is hosted by a metal enclosure which acts as an RF shield. - (2) The module must have buffered modulation/data inputs (if provided) to ensure that the device will comply with FCC requirements under conditions of excessive data rates or over-modulation. Data to the modulation circuit is buffered as described in the operational description provided with the application – (3) The module must contain its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. The module contains its own power supply regulation. Please refer to schematic filed with this application – (4) The module must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) The module connects to its antenna using a standard UFL connector. A list of antennas tested and approved with this device may be found in user’s manual provided with the application – (5) The module must demonstrate compliance in a stand-alone configuration, the module must not be inside another device during testing. This is intended to demonstrate that the module can comply with Part 15 emission limits regardless of the device into which it is eventually installed. No The module was tested within the representative hosts (HMN: PCW-400i, PCW-401i, PCW-400, PWRF-400) as shown in test setup photographs filed with this application (6) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) The module meets Portable exclusion levels as shown in the RF exposure information filed with this application. – (7) The module must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. The module contains multiple metal shields which covers RF components and circuitry. The shields are located on the top of the board next to antenna connector. The module is hosted by a metal enclosure which acts as an RF shield. - (8) The module must comply with any applicable RF exposure requirements Data to the modulation circuit is buffered as described in the operational description provided with the application – * Please provide a detailed explanation if the answer is “No.” Limited Module Description This Limited Modular Approval (LMA) is applied with the understanding that the applicant will demonstrate and will retain control over the final installation of the device, such that compliance of the end product is always assured. The operating condition(s) for the LMA; the module is only approved for use when installed in devices produced by grantee. The module will only be used in BLINQ Networks products so we will be able to ensure full compliance of the end product. Sincerely, Signature: Name: Jim Dickerman Title: VP Operations Company: BLiNQ Networks Inc. Address: 140 Renfrew Drive Suite 200 Phone: 416 214-4204 Email: [email protected]

Dated: January 20, 2026 Nemko North America, Inc. 303 River Road Ottawa, ON K1V 1H2 Canada Authorization to Reference Existing FCC Test Data for Certification Filing New FCC ID: ROR2004 Product Description: WI-FI 7 MODULE FOR BLiNQ 5G SMALL CELL Model Number(s): WIFI7-5G-A This letter serves as a formal request and authorization to reference existing FCC compliance test data for the purpose of certification of the above-referenced product under a new FCC ID. The radio hardware design, RF circuitry, and operating characteristics of the subject device are identical to those previously evaluated and reported under the following FCC ID: Referenced FCC ID: ROR2002 Original Test Laboratory: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Original Test Report Numbers and Issue dates: Report ID Band(s) Rule part Issue date KSCR240700144902 2.4 GHz 15C February 12, 2025 KSCR240700144903 5.1 GHz, 5.2 GHz, 5.5 GHz, 5.8 GHz 15E February 12, 2025 The original (referenced) module supports approved Wi-Fi 6 GHz, but this functionality is currently disabled by software and will not be available for FCC ID: ROR2004. The referenced conducted test data were generated in accordance with the applicable FCC rules and measurement procedures and remain technically valid for the subject device. The RF Wi-Fi module was originally integrated into the final host and certified as an end-product. Later, it was decided that this exact module would also be integrated into several future products (specifically: PCW-400i, PCW-401i, PCW-400, PWRF-400). The client is now seeking limited modular approval for the same module circuitry configuration, except for the antennas. There were no changes to the hardware or RF circuitry, so the client is requesting to reuse some of the conducted (antenna port) data from the original reports. • Since the new antennas have higher gain than the original certification, the power levels were reduced to accommodate the increased gain. • New output power values were provided in the test report to demonstrate EIRP compliance with new antennas as well as new radiated spurious emissions results. • The original conducted spurious emissions, bandwidths, and power density results comply with higher power settings, so they were not retested with the reduced power. Any additional testing required to address differences in configuration, host integration, antenna characteristics, or regulatory scope has been performed and is included in the current application. This data referencing request is made in accordance with FCC policies permitting the use of previously approved test data for certification of identical hardware under a different FCC ID. The applicant confirms that permission to reference the above-listed conducted test data has been obtained, and that copies of the original FCC test reports are provided as part of this filing for FCC review. If you have any questions regarding this request, please contact the undersigned. Sincerely, Signature: Name: Andrey Adelebrg Title: Senior RF/EMC Specialist Company: Nemko Canada Inc. Phone: 613 316 6388 Email: [email protected]

Dated: February 17, 2026 Nemko North America, Inc. 303 River Road, Ottawa, ON K1V 1H2 Canada Attn: Director of Certification LMA Host Model Variants FCC ID: ROR2004 We, BLiNQ Networks Inc., have requested to consider the following host models similar enough to justify certification of one representative sample to cover each of them. PCW-400i – indoor model - radiated PCW-401i – identical to the PCW-400i except GPS receiver is added to the host. No change to any Wifi electrical or antennas from PCW-400i PCW-400 – same as PCW-401i except: • Product is outdoor so housing and radome are larger due to increased environmental needs • Internal Wifi Antennas are higher gain • Wifi Electronics and RF circuitry is the same • This model was used as the representative host PWRF-400 – same as PCW-400 except no internal antennas. Wifi RF ports are brought to external connectors. Should you require any additional information or documentation, please do not hesitate to contact us. Sincerely, Signature: Name: Jim Dickerman Title: VP Operations Company: BLINQ Networks Inc. Address: 140 Renfrew Drive, Suite 200, Markham, ON L3R6B3 Canada Phone: 416 214-4204 Email: [email protected]

External Photographs Exhibit Model Number: WIFI7-5G-A FCC ID: ROR2004 IC: 34658-CPC1001] Applicant: BLiNQ Networks Date: December 19, 2025 Purpose This exhibit provides color photographs of the external appearance of the subject device, as required by FCC §2.1033(b)(7) and ISED RSS-GEN Section 3.2(e). The photos demonstrate the external design, dimensions, and location of regulatory labels and antennas (if visible). Notes • All external photographs are of the final production version of the device. • No digital modifications were made, aside from cropping or brightness correction to improve visibility. 1. Front View 2. Rear View 3. Location of the module inside a host 4. View of the antennas inside the host

Dated: December 15, 2025 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada Covered Equipment Certification Attestation Letter Applicant: BLiNQ Networks Inc. FCC ID: ROR2004 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of t…

Text truncated - open the document above for the full version.