RQ9GMK218Car radio with BT module

K218 Car Radio with BT Module USER MANUAL Product Info Operating Frequency: Bluetooth: 2.400 ~ 2.4835GHz AM: 526.5 ~ 1606.5KHz FM: 87.5 ~ 108MHz Maximum RF Output Power：2.11 dBm (Max. e.i.r.p.) DC Power Source：12VDC Environment Temperature Range：-20~75°C Control panel 1. Volume control Turn right to adjust the volume becomes large; left to adjust the volume becomes smaller; push to turn the mute mode on or off. 2. RADIO button Push to switch the FM / AM band 3. BACK button Push to return to the previous menu 4. When the radio is playing, short press: Skip to previous station. When the media (not including AUX) is playing: Short press: skip to the previous track; press and hold: rewind 5. When the radio is playing, short press: Skip to the next station When the media (not including AUX) is playing: Short press: skip to the next track; press and hold: Fast forward 6. Turn the power on or off the infotainment system. 7. MEDIA button to change to media source or switch between media sources. 8. Press the button to back to the Home Screen. 9. MENU knob screw to control menu choices and browse , push to select items. Touch screen Car infotainment system is equipped with a 8-inch Touch Screen, you can click, drag and drop or slide on the screen. After entering a specific function interface, top of the display there is a Quick Launch bar, There are 3-5 application icons permanently on the Quick Launch Bar, the most recent used icons will be located here. Click on the application icon to enter the corresponding function interface. Media - Radio Press and button to switch stations. Press the right of the screen "FM" icon to switch between FM and AM audio. Press "Browse" to view the list of available stations. Media - Bluetooth audio Infotainment system can play music files on the iPod or Bluetooth devices such as smartphones. Bluetooth devices please refer to the section "phone" part. Telephone If your vehicle is equipped with a telephone function, telephone function allows you to perform a phone call through the microphone and speakers in vehicle, as well as operating the mobile phone function by the vehicle infotainment system. To be able to use the phone, the mobile phone must be connected to the infotainment system via Bluetooth. Not every mobile phones can be supported all phone functions in infotainment system. Available phone features are dependent on the relevant mobile phone and network provider. For more information about this please refer to the mobile phone operating instructions or ask your network provider. Text - SMS If your vehicle infotainment system is equipped with text messaging via Bluetooth capabilities, the system can display the content of the message and send a message. Not all Bluetooth-enabled mobile phone supports this feature or support full functionality. Use text messaging may need to accept the request on the phone, or you need to change some of your phone settings. See your phone manufacturer's user guide. The first time you enter a short message function interface, you need to synchronize the content of messages. Adjust - Set up The infotainment function can be adjusted in the setup menu. Image If your vehicle infotainment system is equipped with USB port and SD card port, the system allows users to browse the pictures in the connected USB device and SD card on the car screen. Carplay The infotainment system supports Mirrorlink, which is the projection function of mobile phone. The mobile phone can be connected to the infotainment system via USB port. Legal Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

Rev 11/20/07 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: RQ9GMK218 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operation Description K218_Schematics_MB_B5_20180814 K218-Block Diagram K218- Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Sincerely, (signature) (printed name) Hu Zibo

C:\Users\yyang30\AppData\Local\Microsoft\Windows\INetCache\Content.Outlook\I4S3W78Z\FCC POA_Letter.docx Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 12/22/2020 SUBJECT: FCC Application for RQ9GMK218 To Whom It May Concern: We, the undersigned, hereby authorize Yu Anlu at TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Yu Anlu on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Hu Zibo

External Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 1 of 3 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer External Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 2 of 3 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer External Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 3 of 3 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer

THIS DRAWING AND ANY INTELLECTUAL PROPERTY RIGHTS THERIN ARE PROPERTY OF VISTEON CORPORATION AND NO LICENSES ARE GRANTED UNDER THOSE RIGHTS OPERATIONSUNITPLANTSAFETY DRAFTED IN ACCORDANCE WITH VISTEON ENGINEERING CAD STANDARDS CURRENT AT INITIAL RELEASE MUST COMPLY WITH VISTEON AND APPLICABLE OEM RESTRICTED SUBSTANCES MANAGEMENT STANDARDS INITIAL ORIGINATOR DATEINITIAL REVIEWER DATEINITIAL ENGINEER DATE 3RD ANGLE PROJ CUSTOMER DATA TYPESCALE:5:1UNITS:MM SHT1/1RH/LH: CUSTOMER NUMBERCPSC :IS MASTER NAME LBL-RADO RECV IDENT CAD FILEYVP-00037758_001 DWG FILEYVP-00037758_001 DATA LOCTCE PRODUCT NUMBER DATA TYPE X-CATIA V5 VPESJF-12A661-GA DWG SIZE: A1 LTRSREVISIONS DATEORIGINATORREVIEWERENGR APP ZLU NOT RELEASE FOR QUOTATION ZFANYWU25 GBC: UNLESS OTHERWISE SPECIFIED THE LETTER/NUMBER CODE PRECEDING ANY NOTE IS FOR CAD NOTE IDENTIFICATION AND RETREIVAL ONLY LABEL TO BE SUPPLIED IN ROLL FROM ON RELEASE PAPER FOR CURRENT RELEASE STATUS SEE THE VISTEON ENGINEERING NOTICE MATERIAL: RESIN COATED PAPER LABEL WITH POLYESTER FILM TOP COAT PER ESF-M99J349-A1 LABEL SHALL BE YELLOW PRINTING SHALL BE BLACK PERMANENT INK PRINTING SHALL BE LEGIBLE AFTER TESTING PER GMW145731 LABEL PRINT QUALITY MUST COMPLY WITH ISO/IEC 15415 AND ISO/IEC 16022 AS SPECIFIED IN GMW15862 THIS COMPONET TO BE FREE OF HAZARDOUS MATERIALS ACCORDING TO GMW3059 TEXT AND 2D CODE CONTENT MEET SPEC GMW15862 ENGINEERING APPROVAL MUST BE OBTAINED BEFORE ANY CHANGE IN MATERIAL - CONSTRUCTION - OR PROCESSING CAN BE MADE THE MASTER SOURCE OF INFORMATION FOR THIS DRAWING IS IN A PE COMPUTER DATABASE. CHANGES ARE NOT PERMITTED WITHOUT PRIOR CONSENT OF THE RELEVANT ENGINEERING CAD ACTIVITY. 20201208 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. K218 Model Yanfeng Visteon Automotive Electronics Co., Ltd. Part Name: Car Radio with BT Module Input: 12V Contains IFETEL: XXXXXXXXXXXXX ,<15A CMIIT ID：XX FCC ID: XXXXXXXX 2() 2() 2() 2() 2() 1 ±0.2 75 ±0.2 45 ±0.2 10.5() 10.5() 7.2() 9.7() 7() 5MIN 2D BARCODE: QR CODE 6 ±0.2 6 ±0.2

Internal Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 1 of 5 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer Internal Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 2 of 5 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer Antenna Antenna Internal Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 3 of 5 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer Internal Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 4 of 5 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer Internal Photos Documentation Project number: 708882048310-00 FCC ID: RQ9GMK218 Page 5 of 5 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 FormPage number:___1___ Test Worksheet-Test SummaryforIEC/EN 60950-1 Project No.:704201621801Model No.:N/ASample No.:1# Page number:Page 1of 1 F o r m I D : T P S _ G C N _ F _ 0 9 . 1 3 E – R e v . 0 T D S I D : G C N _ T D S _ 6 0 9 5 0 - 1 _ R e v . 0 - T D S E f f e c t i v e d a t e : 2 0 1 3 - 0 3 - 1 8 T D S c r e a t e d b y : I c e F e n g T D S r e l e a s e d b y : A l e x K o n g Standard: IEC 60529 Product: Pad Rated input (V/Hz/A)-- Project Engineer:XIAO YanqinRated output (V/A)-- Test Engineer:XIAO YanqinProtection class:I II III Application Date:2016-07-12Protection against moisture: IPX2 Requested Date:2016-07-13Construction:-- Type of test:Full test Re-test Operation mode:continous intermitten short time KB___min Others: Weight (kg):0- Other information: Total page: __2_ pages .............................................................................. Signature / DateSignature/ Date Record by Test EngineerCheck by Project Engineer

Report No: 708882048310-00A EMC_SHA_F_R_02.07E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 1 Rev. 20.00 RF exposure Estimation 1.Introduction Product: Car Radio with BT Module Model no.: K218 FCC ID: RQ9GMK218 The EUT is Car Radio with BT Module, which contain Bluetooth function inside. 2.Limit and Guidelines on Exposure to Electromagnetic Fields According to§15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 Mobile Portable RF Exposure v05r02, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. 3.Calculation method [(max. power of` channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 Conducted Power + tune up tolerance =5.2dBm= 3.3mW Distance = 5 mm f = 2.402 GHz [3.3/5] * SQRT (2.402) =1.022 1.022≤ 3.0 Therefore, excluded from SAR testing. - TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch Reviewed by: Prepared by:Tested by: _____________________ ___________________________________________ Hui TONGJiaxi XUWenqiang LU EMC Section ManagerEMC Project EngineerEMC Test Engineer Date: 2020-12-23 Date: 2020-12-23 Date: 2020-12-23

Report Number: 708882048310-00 EMC_SHA_F_R_02.03E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 64 Rev. 20.00 FCC - TEST REPORT Report Number:708882048310-00Date of Issue:December 23, 2020 Model :K218 Product Type:Car Radio with BT Module FCC ID:RQ9GMK218 Applicant:Yanfeng Visteon Automotive Electronics Co.,Ltd Address:300 Minolta Road Songjiang County Shanghai, China Production Facility:Yanfeng Visteon Automotive Electronics Co.,Ltd Address:300 Minolta Road Songjiang County Shanghai, China Test Result: Positive Negative Total pages including Appendices :64 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 708882048310-00 EMC_SHA_F_R_02.03E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 64 Rev. 20.00 1 Table of Contents 1Table of Contents....................................................................................................................2 2Details about the Test Laboratory ...........................................................................................3 3Description of the Equipment Under Test ...............................................................................4 4Summary of Test Standards ...................................................................................................5 5Summary of Test Results........................................................................................................6 6General Remarks ....................................................................................................................7 7Test Setups .............................................................................................................................8 8Systems test configuration ....................................................................................................10 9Technical Requirement .........................................................................................................11 9.1Conducted peak output power .......................................................................................11 9.220 dB bandwidth.............................................................................................................17 9.3Carrier Frequency Separation ........................................................................................22 9.4Number of hopping frequencies .....................................................................................24 9.5Dwell Time......................................................................................................................25 9.6Spurious RF conducted emissions .................................................................................28 9.7Band edge testing ..........................................................................................................48 9.8Spurious radiated emissions for transmitter and receiver ..............................................55 10Test Equipment List ...........................................................................................................61 11System Measurement Uncertainty.....................................................................................62 12Photographs of Test Set-ups .............................................................................................63 13Photographs of EUT ..........................................................................................................64 Report Number: 708882048310-00 EMC_SHA_F_R_02.03E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 3 of 64 Rev. 20.00 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name:TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch No.16 Lane, 1951 Du Hui Road, Shanghai 201108, P.R. China Test Firm FCC Registration Number: 820234 Test Firm IC Registration Number: 25988 Telephone:+86 21 6141 0123 Fax:+86 21 6140 8600 Report Number: 708882048310-00 EMC_SHA_F_R_02.03E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 4 of 64 Rev. 20.00 3 Description of the Equipment Under Test Product:Car Radio with BT Module Model no.:K218 FCC ID:RQ9GMK218 Options and accessories:N/A Rating:12VDC Hardware Version:D3 Software Version:5.6.6.97 RF Transmission Frequency: 2402~2480MHz No. of Operated Channel:79 Channel list:00:2402MHz, 01:2403MHz, 0…

Text truncated - open the document above for the full version.

FCC ID: RQ9GMK218 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 2020 Not to be reproduced, except in its entirety,Page 1 of 2 without the Permission of TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch Reference: 708882048310-00 PHOTOGRAPHS OF TEST SET UP Field Strength and Harmonics Test Setup Radiated Emission Setup 9k~30MHz 30MHz~1GHz FCC ID: RQ9GMK218 Manufacturer: Yanfeng Visteon Automotive Electronics Co.,Ltd Product: Car Radio with BT Module Model: K218 2020 Not to be reproduced, except in its entirety,Page 2 of 2 without the Permission of TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch Reference: 708882048310-00 1GHz~18GHz 18GHz~25GHz