RW8A5Q00004068Dual Technology Motion Detector

Installation manual 007343_d_--_-- Edition 11.08.2004 Supersedes 007343_c_--_-- PN A5Q00004080 IRM120C Matchtec® Motion Detector Matchtec® Bewegungsmelder Détecteur volumétrique Matchtec® Rivelatore di movimento Matchtec® Detector de movimiento Matchtec® Matchtec® bewegingsdetector Made in Switzerland FCC−ID: RW8 A5Q00004068 1 3 Wide angle mirror Weitwinkel-Spiegel Specchio grandangolare Espejo gran angular BreedhoekspiegelMiroir grand-angle Miroir rideau Specchio a tendaCurtain mirror Vorhang-SpiegelEspejo de cortina Gordijnspiegel 2 4 Wall mounting Wandmontage Montage sur mur Montaggio a muro Montaje en pared Montage op een mur Corner mounting Eckmontage Montage dans un angle Montaggio ad angolo Montaje en esquina Montage in een hoek 2° A B Fire & Security Products Siemens Building Technologies IRMC104 PN 562 247 max. 12kg / 26lb max. 20kg / 44lb IRS122PN 562 302 45_ mounting 45_-Montage Montage 45_ Montaggio 45_ Montaje 45_ Montage 45_ 0 0 h = 2,2m 7.2ft max. 2,6m 8.5ft min. 2,0m 6.5ft 5m 16ft 5m 16ft 10m 33ft 10m 33ft 0,9m 3ft 15m10m5m0 16ft33ft50ft MW MW 0 h = 2,2m 7.2ft max. 3,5m 11.5ft min. 2,0m 6.5ft 0,9m 3ft MW PIR PIR PIR MW 0 5m 1m 16ft 3.3ft 1m 3.3ft 5m 16ft 12m10m5m0 16ft33ft 39ft PIR Can be used in the following countries/ Darf in den folgenden Ländern eingesetzt/ Peut être utilisé dans les pays suivants/ BE, ES, FI, FR, IT, NL, SE, UK. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer- ence by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Approval This device complies with Part 15 of the FCC Rules and with RSS−210 of Industry Canada. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications made to this equipment not expressly approved by Siemens Building Technologies AG may void the FCC authorization to operate this equipment. 007343_d_08_2004_Vers1 p2 10 8 11 Do not install the detector outdoors. Melder nicht im Freien montieren. Ne pas monter le détecteur à l’extérieur. Non montare il rivelatore all’aperto. No montar el detector al aire libre. Uitsluitend voor installatie binnenshuis. Avoid looking directly at air conditioning or heat sources. Zonen nicht direkt auf Kälte- bzw. Wärmequellen richten. Ne pas diriger les zones sur radiateurs ou climatiseurs. Non indirizze le zone su radiatori o condizionari d’aria. No dirigir las zonas encima de calefactores o aparatos de aire acondicionado. Richt de zones nooit op verwarmde oppervlakten of aircondi- tioners. 4 56 B 7 Relay shown in energised (non-alarm) condition Relais in aufgezogenem Zustand (kein Alarm) gezeichnet Le relais est dessiné à l’état attiré (pas d’alarme) Il relè è disegnato in stato eccitato (nessun allarme) El relé ha sido dibujado en estado excitado (sin alarma) Relais in aangetrokken toestand (geen alarm) getekend * 2 1 4 11 10 15 14 + − Relais d’alarme Relè d’allarme Alarmrelais Alarm relay Rele de alarma Alarm relais Contact de couvercle Contatto del coperchio Sabotagekontakt Tamper contact Contacto de la tapa Sabotagecontact Test Ensayo +5V Alimentation Alimentazione Speisung Supply Alimentación Voeding ON OFF DIP 31 A B A AA AA AA 9 TOP Cable knock-out Kabeldurchführung Passage de câble Foro per il cavo Orificio para cable Kabelpassage Cable attachment Kabel-Befestigung Fixation du câble Fissaggio per cavo Fijación del cable Kabelbevestiging IRUM20 IRUM30 PN 562 247 PN 562 250 8...16V * <45R 30V vide riserva leer spare reserva reserve 007343_d_08_2004_Vers1 p3 IRM120C Instructions for use The detector reacts to movements by people: − the passive infrared section (PIR) detects changes in the infrared energy which is received; − the microwave section (MW) detects movements. Extraordinarily reliable detection is made possible thanks to the intelligent digital signal processing and system linkage (Matchtec). Only unambiguous and ver- ified movement signals in the two partial systems will re- sult in an alarm signal. The detector reacts with greatest sensitivity to move- ments that are diagonal to the active zones (direc- tions shown by arrows, Fig. 1 and 2). The detector is designed to achieve optimum re- sponse coupled with the suppression of false alarms (non-detection of small animals). Nevertheless, it is recommended that the following points be observed (Fig. 11): − Do not align the zones with sources of heat and cold, or with places that are subject to strong solar radiation or reflected heat. − Direct the zones towards uniform references. Zones which are directed towards heaters (includ- ing floor heating equipment) can reduce the proba- bility of the detection of movement. − If it is impossible to avoid positioning the detector above heaters, then the detector should be posi- tioned at least 1.5m from the heaters! Do not remove the printed circuit board from the detector. There is a danger that it may be dam- aged! Mounting location The detector is…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 August 12, 2004 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Siemens Building Technologies AG requests confidentiality for the following products: FCC ID Number Product Title/Model RW8 A5Q00004068 IRM120C For the product stated above, we request that the following information be held confidential: 1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: "schematics”. 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “blockdiagram”. 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: “operational description” The above exhibits contain Siemens Building Technologies AG trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our motion detector. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, i.V. Name: Martin H. Scherrer Company: Siemens Building Technologies AG Address: Alte Landstrasse 411, 8708 Maennedorf, Switzerland Phone: +41-1-922 6111 Email: [email protected]

CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 27 of 30 Photo 3

negnurednÄ1:1batssaM mutaDemaN dlihcS-ssulhcsnA C021MRI:uz .zeG 30.40.22orF .rpeG .seG ybthgirypoc snemeiS GAseigolonhceTgnidliuB stcudorPytiruceS&eriF 303270AA4040.80.01liL 30A87040000Q5A ttalB 207760AA3040.10.41gdH 1 100010AA3030.40.22orF 1.lB .tsuZgnurednÄmutaDemaN 1002,frodennäM8078-HC.F.srE.d.srE X+ Y+ Spezifikation Material:Papier weiss, matt selbstklebend S2060 stark haftend Druck:Schwarz RAL 9005 licht -und kratzfest Ausführung:Ausgestanzt auf Trägerfolie in Bandform Datenfile für Druckvorlage:A5Q00004078-03.ai IRM 120 C A5Q00004068 Refer to installation manual A5Q00004080 562302 562315 SPARE FCC - ID: RW8 A5Q00004068 50 115 A A 54.3

CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 28 of 30 Photo 4 CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 29 of 30 Photo 5 CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 30 of 30 Photo 6

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6–10, D-66117 Saarbrücken, Telephone +49 (0) 681 598 - 0 , Fax +49 (0) 681 598 – 9 075 Test report No.: 2–3714–01–01/04This test report consists of 30 pagesPage 1 of 30 Recognized by the Federal Communications Commission and Industry Canada Anechoic chamber registration No. 90462 (FCC) Anechoic chamber registration No. 3463 (IC) TCB ID: DE0001 Accredited by the German Accreditation Council DAR–Registration Number TTI–P–G 081/94-D0 Independent ETSI compliance test house ETSI Test report No.:2–3714–01–01/04 Applicant:Siemens Building Technologies AG Type:IRM120C FCC ID:RW8A5Q00004068 Test standard:FCC Part 15 CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 2 of 30 Table of contents 1.General information............................................................................................................ 3 1.1.Notes .............................................................................................................................. 3 1.2.Testing laboratory ..........................................................................................................4 1.3.Details of applicant ........................................................................................................4 1.4.Application details .........................................................................................................4 1.5.Test item (EUT) .............................................................................................................5 1.6.Technical data ................................................................................................................ 5 1.6.1.Operation conditions ......................................................................................................5 1.6.2.Equipment under test .....................................................................................................5 1.7.Test standards:................................................................................................................ 6 1.8.Code of Federal Regulations (CFR 47).......................................................................... 6 2.Technical test...................................................................................................................... 7 2.1.Summary of test results .................................................................................................. 7 2.2.Test environment............................................................................................................7 2.3.Measurement and test set-up .......................................................................................... 7 2.4.Test equipment utilized and test set-up .......................................................................... 8 2.5.Test results ................................................................................................................... 12 3.Plots, graphs and data sheets ......................................................................................... 15 4.Photographs ..................................................................................................................... 25 CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 3 of 30 1. General information 1.1. Notes The test results of this test report relate exclusively to the test item specified in 1.5.. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. Tester : 19.08.2004 Manfred Paschwitz DateNameSignature Technical responsibility for area of testing : 19.08.2004 Dirk Hausknecht DateNameSignature CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 4 of 30 1.2. Testing laboratory CETECOM ICT Services GmbH Untertürkheimerstraße 6–10P.O. Box 10 04 45 66117 Saarbrücken66004 Saarbrücken GermanyGermany Telephone:+ 49 (0) 681 598–0 Fax:+ 49 (0) 681 598–9075 e-mail:[email protected] Internet:http://www.cetecom.de Accredited testing laboratory Accredited by: Regulierungsbehörde für Telekommunikation und Post (RegTP) Listed by: Federal Communications Commission (FCC) Industry Canada AuthorityIdentification/Registration No. RegTPTTI-P-G 081/94-D0 FCC90462 IC3463 Testing location, if different from CETECOM ICT Services GmbH: (Not applicable) Name:(Not applicable) 1.3. Details of applicant Name:Siemens Building Technologies AG, Fire & Security Products Street:Alte Landstraße 411 Town:CH-8708 Männedorf Country:Switzerland Telephone:+41 (0) 1 922 6111 Contact person Name:Stefan Hegnauer Telephone:+41 (0) 1 922 6371 Fax:+41 (0) 1 922 6767 e mail:[email protected] 1.4. Application details Date of receipt of application :03.08.2004 Date of receipt of test item:03.08.2004 Date of test:16./17.08.2004 CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 5 of 30 1.5. Test item (EUT) Description of EUT:Microwave/passive-infrared motion detector Type designation:IRM120C FCC ID:RW8A5Q00004068 Manufacturer:Siemens Building Technologies AG, Fire & Security Products Street:Alte Landstraße 411 Town:CH-8708 Männedorf Country:Switzerland 1.6. Technical data Frequency range:2.405 GHz ... 2.480 GHz Operational frequency:2.448 GHz Field strength:163 mV/m Type of modulation :100H0N0N (CW) Microwave modules:TX / RX – Module with integral antenna Normal DC power supply:12.0 V Extreme DC power supply :8.0 V ... 16.0 V 1.6.1. Operation conditions Operation::As soon as the equipment is powered up, TX and RX start operating Purpose of operation:Microwave Sensor 1.6.2. Equipment u…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 25 of 30 4.Photographs Photo 1 CETECOM ICT Services GmbH Test report No.: 2–3714–01–01/04Date : 19.08.2004Page 26 of 30 Photo 2