RX2NBCL5Vehicle Immobilizer

40 GETTING TO KNOW YOUR CAR SAFETY STARTING AND DRIVING IN AN EMERGENCY SERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS CONTENTS SYMBOLSSome components of the car have coloured labels who se sym- bols indicate precautions to be observed when using this compo- nent. Under the bonnet there is also a label that s ummarises all the symbols. ALFA ROMEO CODE SYSTEMThis is an electronic engine locking system which i ncreases pro- tection against attempted thefts of the car. It is automatically ac- tivated when the ignition key is extracted. Each key contains an electronic device which modula tes the sig- nal emitted during ignition by an antenna built int o the ignition de- vice. This signal is the ‘password’ which changes a t each ignition and which the control unit uses to recognise the ke y and enable ignition.OPERATION The Alfa Romeo CODE system control unit sends an ac knowl- edgement code to the engine management control unit to deacti- vate the inhibitor each time the car is started by turning the igni- tion key to MAR.The code is sent only if the Alfa Romeo CODE system control unit has recognised the code transmitted from the key. Each time the ignition key is turned to STOP, the A lfa Romeo CODE system deactivates the functions of the engine management control unit. Warning light Y lights up on the instrument panel if the code is not correctly recognised during igni tion. In this case, turn the key to STOP and then to MAR; if it is still locked, try again with the other keys that come wit h the car. If you are still unable to start the engine contact Alfa R omeo Authorized Services. 41 GETTINGTO KNOW YOUR CARSAFETYSTARTING AND DRIVINGIN AN EMERGENCYSERVICING ANDMAINTENANCETECHNICALSPECIFICATIONSCONTENTS Warning light Y comes on when driving  If the warning light Y turns on, this means that the system is running a self-test (due for example to a voltag e drop).  Contact Alfa Romeo Authorized Services if the Y warning light stays on. KEYSCODE CARD (for versions/markets, where provided) A CODE card fig.14 is provided together with the ke ys. On the card you will find a mechanical code A and an electronic code B. Keep the codes in a safe place, not in the car. The Electronic components inside the key may be damaged if the key is subjected to shocks. fig. 14 A0K0008m A B 42 GETTING TO KNOW YOUR CAR SAFETY STARTING AND DRIVING IN AN EMERGENCY SERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS CONTENTS MECHANICAL KEY The metal insert A-fig.15 operates: the ignition switch;  the door lock. fig. 15 A0K0047m fig. 16 A0K0048m Press B button fig.16 only with the key away from your body, especially your eyes and from objects which could get damaged (e.g. your clothes). Do not leave the key unattended to avoid the button be ing accidentally pressed while it is being handled, e.g . by a child. KEY WITH REMOTE CONTROL(for versions/markets, where provided)The metal insert A-fig.16 operates: the ignition switch;  the door lock. Press B button to open/close the metal insert. 43 GETTINGTO KNOW YOUR CARSAFETYSTARTING AND DRIVINGIN AN EMERGENCYSERVICING ANDMAINTENANCETECHNICALSPECIFICATIONSCONTENTS Unlocking the doors and the bootBriefly press Ë button: unlock of doors and boot, timed operation of ceiling lights, double flash of the direction indicators (for ver-sions/markets, where provided). Door lock is automatically released if the fuel cut -off system trips. Once the doors are locked, if one or more doors or the boot are not closed correctly, the LED and direction indicat ors start flashing quickly. Locking the doors and the bootBriefly press Á button: lock of doors and boot with ceiling lights off and single flash of direction indicators (for versi ons/markets, where provided).If one or more door are open, the doors will not be locked. This is indicated by a rapid flashing of the direction indi cators (for ver- sions/markets, where provided). The doors will be l ocked even if the boot is open.When a speed of over 20 km/h is reached, the doors are auto- matically locked if this specific function has been set (only on ver- sions with multi-function reconfigurable display). When the doors are locked from outside the car (usi ng the remote control), A LED fig.17 will light up for a few seco nds and then start flashing (deterrent function).When the doors are locked from inside the car (by p ressing ≈ ) the LED will remain on constantly. Opening the bootPress R button to open the boot using the remote control. T he direction indicators will flash twice to indicate t hat the boot has been opened. fig. 17 A0K0122m 44 GETTING TO KNOW YOUR CAR SAFETY STARTING AND DRIVING IN AN EMERGENCY SERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS CONTENTS REQUESTING ADDITIONAL REMOTE CONTROLSThe system can acknowledge up to 8 remote controls. If you need to request a new remote control, contact Alfa Romeo Authorized Services, taking the CODE card (for versions/market s, where pro- vided), an identity document and documents proving your own- ership of the car with you. fig. 18 A0K0051m Used batteries are harmful to the environment. They should be disposed of as specified by law in special containers or taken to an Alfa Romeo Au- thorised Service Provider, which will take care of their dis- posal. REPLACING THE BATTERY KEY WITH REMOTECONTROLProceed as follows: press A button fig.18 and open out the B metal inse rt; turn C screw to : using a small point screwdriver;  remove the D battery holder case and replace E batt ery re- specting the polarity; reinsert D case into the key and secure it by turning C screw to Á . 45 GETTINGTO KNOW YOUR CARSAFETYSTARTING AND DRIVINGIN AN EMERGENCYSERVICING ANDMAINTENANCETECHNICALSPECIFICATIONSCONTENTS SAFE LOCK DEVICE (for versions/markets where provided)This safety device prevents operation of the inside door handles and of the door locking/unlocking button. We recomm end that you activate this device whenever you park your car . Switching the device onThe device is enabled on…

Text truncated - open the document above for the full version.

Power of Attorney We, the undersigned, hereby authorise FAKT S.r.l. Via Lithos, 53 25086 Rezzato (BS) ITALY to require the certificate of conformity according with section 2.907 47 CFR for the following radio equipment NBCL5 (Name of product, type or model) on behalf of the manufacturer / authorised representative of the manufacturer − Address: Magneti Marelli S.p.A. Viale A. Borletti, 61/63 I – 20011 Corbetta (MI) (With this letter the undersigned does not appoint FAKT S.r.l. to act as authorised representative of the manufacturer. FAKT S.r.l. does not assume any responsibilities or liabilities placed on the manufacturer according to the FCC rules) − Point of contact: Ing. Giuseppe Bergamaschi Tel: +39-02-97221 Fax: +39-02-9722740 (Name, telephone and fax number) Corbetta, 07.12.2011 (Place, date of issue) (Signature, Stamp)

Corbetta 21/12/2010 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Magneti Marelli S.p.A. would like the following documents regarding this submission for FCC ID: RX2NBCL5 to be kept confidential. 1. Schematic diagram 2. Block diagram 3. Product description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Magneti Marelli S.p.A.

Magneti Marelli S.p.A. Model: NBCL5 FCC ID.: RX2NBCL5 IC: 4983A-NBCL5 This device complies with Part 15 of the FCC rules subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept all interference received, including interference that may cause undesired operation. Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

BCML5

Report Type: Production BOM Codice: 554440350207 Versione: 0 Level: WORKING Description: BCP940D.01 POWER VERSIONE FULL EUROPA (SENZA AFS) Catalog: BCP - Body Computer Power - 940D.01 Doc Phase: PS Nip code: E50 Level Code Description Ref.Designators Qty State Name Processability 0 554440350207 BCP940D.01 POWER VERSIONE FULL EUROPA (SENZA AFS) WORKING SUBASSEMBLY_QDB 1 520900042000 CT_M_DR_.32SN2A_2,50_NN_N P1, P2 2 QUALIFIED CONNECTOR_PTH LeadFree - 1 555440350300 BUS BAR N.2 CONTATTO 8MM P36 1 QUALIFIED MECPART_QDB 1 520358180565 FU_..5A_..32V_....ATS--5A F31, F42, F49, F51 4 QUALIFIED OTHER - 1 555440350500 TABS 2,8 MM P5, P16, P18, P19, P20, P21, P33, P34, P37, P38, P45, P46, P47, P48, P55, P56, P57, P58, P65, P66, P67, P68, P75, P76 24 QUALIFIED MECPART_QDB 1 550206550008 PANEL NBCXXXD.XX - POWER BOARD 0.5 QUALIFIEDCONDITIONED BREAKAWAY 1 520358180585 FU_.10A_..32V_...ATS--10A F36 1 QUALIFIED OTHER - 1 555440350200 BUS BAR N.1 CONTATTO 8MM. P35 1 QUALIFIED MECPART_QDB 1 520358180575 FU_7,5A_..32V_..ATS--7.5A F12, F13, F32, F37, F50, F53, F90, F91, F92, F93 10 QUALIFIED OTHER - 1 555440350400 TUNING FORK TF1, TF2, TF3, TF4, TF5, TF6, TF7, TF8, TF9, TF10, TF11, TF12, TF13, TF14, TF15, TF17, TF18, TF19, TF20, TF21, TF22, TF23, TF24, TF25, TF26, TF27, TF28 27 QUALIFIED MECPART_QDB 1 555440350600 TABS 1,5 MM P6, P7, P8, P9, P12, P13, P14, P15, P22, P23, P24, P25, P26, P27, P28, P29, P30, P31, P39, P40, P41, P42, P43, P44, P49, P50, P51, P52, P53, P54, P59, P60, P61, P62, P63, P64, P69, P70, P71, P72, P73, P74 42 QUALIFIED MECPART_QDB 1 520963550076 Q_XE_..NM_..59W_...MOSFET U1, U2 2 QUALIFIED MOSFET LeadFree T - PbFree and not PbFree 1 520358180605 FU_.20A_..32V_...ATS--20A F33, F34, F38, F43, F47, F48 6 QUALIFIED OTHER - 1 520363550766 Q_XE_..NM_...1W_.NID5001N Q1, Q2 2 QUALIFIED MOSFET - 1 520958030026 RL_................HFKA-T RL3, RL4, RL5, RL6, RL7, RL8, RL9, RL10 8 QUALIFIEDCONDITIONED RELAY LeadFree -

Note: The test data of this report is related only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. Trade Register Straubing HRB 9302 V.A.T. DE 131457658 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuev-sued.com/imprint Managing Director: Johann Roidt Phone: +49 9421 55 22-0 Fax: +49 9421 55 22-99 www.tuev-sued.de/senton TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Prüfbericht / Test Report Nr. / No. 69559-03150 (Edition 4) Applicant: Magneti Marelli Type of equipment: Immobilizer with RFID Reader Type designation: NBC L5 immobilizer Order No.: 10/0346 Test standards: FCC Code of Federal Regulations, CFR 47, Part 15, Sections 15.205, 15.207 and 15.209 Industry Canada Radio Standards Specifications RSS Gen Issue 3, Sections 7.2.2, 7.2.4, 7.2.5. RSS 210 Issue 8, Section 2 February 21, 2012 Page 1 of 36 TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 69559-03150 (Edition 4) Page 2 of 36 Pages Table of Contents 1 Description of the Equipment Under Test (EUT) ............................................................ 3 2 Administrative Data ........................................................................................................ 4 3 Identification of the Test Laboratory ............................................................................... 5 4 Summary ........................................................................................................................ 6 5 Operation Mode and Configuration of EUT .................................................................... 7 6 Measurement Procedures .............................................................................................. 8 6.1 Bandwidth Measurements ....................................................................................... 8 6.2 Radiated Emission Measurement 9 kHz to 30 MHz ................................................. 9 6.3 Radiated Emission at Alternative Test Site ............................................................ 11 7 Photographs Taken During Testing .............................................................................. 13 8 Test Results ................................................................................................................. 17 8.1 Occupied Bandwidth .............................................................................................. 18 8.2 Bandwidth of the Emission ..................................................................................... 22 8.3 Designation of Emissions ....................................................................................... 24 8.4 Restricted Bands of Operation ............................................................................... 25 8.5 Radiated Emission Measurement 9 kHz to 30 MHz .............................................. 27 8.6 Radiated Emission Measurement 30 MHz to 1 GHz ............................................. 28 8.7 Exposure of Humans to RF Fields ......................................................................... 29 9 Referenced Regulations ............................................................................................... 31 10 Revision History ........................................................................................................... 33 11 Charts taken during testing .......................................................................................... 34 12 Calibration Data ........................................................................................................... 35 TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 69559-03150 (Edition 4) Page 3 of 36 Pages 1 Description of the Equipment Under Test (EUT) General data of EUT Type designation 1 NBC L5 immobilizer : Parts 2 : Serial number(s): Test Sample Manufacturer: Magneti Marelli Type of equipment: Immobilizer with RFID Reader Version: As received FCC ID: Additional parts/accessories: Technical data of EUT Application frequency range: 125 kHz Frequency range: 125 kHz Operating frequency: 125 kHz Type of modulation: ASK Pulse train: --- Pulse width: --- Number of RF-channels: 1 Channel spacing: --- Designation of emissions 3 10K0A1D : Type of antenna: Loop antenna Size/length of antenna: 45 mm Connection of antenna: detachable not detachable Type of power supply: Battery supply Specifications for power supply: nominal voltage: 12 V 1 Type designation of the system if EUT consists of more than one part. 2 Type designations of the parts of the system, if applicable. 3 Also known as "Class of Emission". TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 69559-03150 (Edition 4) Page 4 of 36 Pages 2 Administrative Data Application details Applicant (full address): Magneti Marelli Contact person: Mr. Nicola Scartapacchio from Fakt S.r.l. Order number: 10/0346 Receipt of EUT: November 3, 2010 Date(s) of test: November 3, 2010 – December 8, 2010 Note(s): Report details Report number: 69559-03150 Edition: 4 Issue date: 21 February 2012 TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 69559-03150 (Edition 4) Page 5 of 36 Pages 3 Identification of the Test Laboratory Details of the Test Laboratory Company name: TÜV SÜD SENTON GmbH Address: Aeussere Fruehlingstrasse 45 D-94315 Straubing Germany Laboratory accreditation: DAR-Registration No. DAT-PL-171/94-03 F…

Text truncated - open the document above for the full version.

TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 69559-03150 (Edition 2) Page 14 of 36 Pages Test setup for radiated emission measurement 9 kHz – 30 MHz TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 69559-03150 (Edition 2) Page 15 of 36 Pages Test setup for radiated emission measurement (alternate test site) TÜV SÜD SENTON GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.com/senton eMail: [email protected] Test Report No. 69559-03150 (Edition 2) Page 16 of 36 Pages Test setup for radiated emission measurement (alternate test site) - continued -