RYLH3GH-5001Wireless Mouse

User Manual 1. Plug the receiver into PC USB port before using, the red indicator shines means the connection between PC and receiver is OK. 2. Load the batteries to the mouse and click on the power switch then the optical LED will be lightened. 3. Click the mouse ID setting button, its optical LED will be darkened and the low power indicator (red color) will shine for once. 4. Click the receiver ID setting button, it will shine red slowly. 5. After ID setting of the mouse and receiver is finished, the red indicator of receiver will be quickly shining and then stop shining which shows that the connection between mouse and receiver is OK. FCC Warning Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. The equipment compliance with FCC radiation exposure limits set forth for uncontrolled Environment.

Battery 27.042MHz Crystal

External Photos EUT- Front View EUT- Top View EUT- Bottom View

ID Label/Location FCC ID Label FCC Label Location Information Specifications: Text is Black or white in color and is left justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. ID Label Location: FCC ID: RYLH3GH-5001

Internal Photos EUT – Uncovered View EUT- Main Board Components Top View EUT- Main Board Components Bottom View EUT- Interface Board Components View EUT- Interface Board Circuit View

Wireless Mouse Transmitter Circuit Description a. IC-ATA2180：IC-ATA2180 is the integration of wireless controlling IC and optical IC. The optical part of ATA2180 transforms the image of the mouse movement to the electronic signal, and then sends to the controlling IC; the signal transmits from the antenna after modulated to a frequency of 27.045 MHz. b. The clock signal of IC- MA6221 is controlled by clock of oscillating controller. c. When the optical part of IC－ATA2180 is working, the MCU will output the controlling signal Q1 from the PIN 12 to control the brightness of LED d. The operating voltage of IC- ATA 2 1 8 0 is 1.5V. e. Supply Voltage: 1.5V

1234 A B C D 4321 D C B A Title NumberRevisionSize A4 Date:21-Dec-2007Sheet of File:C:\Documents and Settings\rd6\\H3G\H3G.DDB桌面Drawn By: C14 104C13 470UF/6.3V L3 100UH C16 220UF/10V SWID C533P X2 27.042MHZ C82p C4 33P C11 47P SWL SWM SWR LBUT MBUT RBUT C15 104 X1 76.8KHZ R1 10M C1 22P C2 22P C20 104 RRED 68R C915P C1210P C21 4.7UF/6.3V R3 510K 1 2 3 4 BT1 R4 680K L1 1.8UH C7 47p C10 22p VCC C3 104 D1 RB421 BT1 OSC1 1 VSS 2 OSC2 3 VDD 4 R_BUT 5 M_BUT 6 L_BUT 7 RF_OUT 8 ORFIN 9 ORFO 10 TXD 11 PD 12 WA 13 WB 14 Z1IN 15 Z2IN 16 X2IN 17 X1IN 18 BAT_L 19 Y1IN 20 Y1IN 21 TXCB 22 B_BUT 23 F_BUT 24 SVDIN 25 DCVR 26 VL 27 VL_NM 28 U2 MA6221-Q17K XY_LED 1 VDD 2 NC 3 VSS 4 NC 5 YA 6 YB 7 XB 8 XA 9 OSC 10 VSSA 11 VDDA 12 U1 ATA2180LF R7 10k ANT 27.045MHz R2 220K D4 2N3906 VDD VDD VDD VCC VCC R8 OPEN V C C SVDIN S V D I N Y2 Y1 X1 X2 X2 X1 Y2Y1 LED2LED 1 2 3 SW-Z SW SPDT SW6 C22 104 E N 1 E X T 2 G N D 3 L X 4 V D D 5 F B 6 U3 RT9266 R6 82K R5 100K + 1 - 2 BAT 1 - 2 + 3 8 4 CU1A LM358 CD1 1N4148 CR1 68R CR5 8.2K CR4 20K CR2 1K +5V_USB +5V_USB CC2 103P CC1 103P CR3 680R CD2 IN4148 vcc BAT-L BAT-L CR6 68R 1 LED5 RED GREEN PDF created with pdfFactory trial version www.pdffactory.com

Note: This test report is for the customer shown above and their specific product only. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Shenzhen). This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the Federal Government. FCC PART 15.227 MEASUREMENT AND TEST REPORT For DynaPoint (Dong Guan) Inc. The Sixth Industrial Park, Shangsha, South Area ChangAn, DongGuan, GuangDong, China 523880 FCC ID: RYLH3GH-5001 This Report Concerns: Original Report Equipment Type: Wireless Mouse Test Engineer: Bruce Zhang Report No.: RSZ07122403 Test Date: 2008-01-02 Report Date: 2008-01-07 Reviewed By: EMC Manager: Green Xu Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 DynaPoint (Dong Guan) Inc. FCC ID: RYLH3GH-5001 Report No.: RSZ07122403.doc Page 2 of 14 FCC PART 15.227 Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY..................................................................................................................................................3 TEST FACILITY.............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 DESCRIPTION OF TEST CONFIGURATION......................................................................................................................5 EUT EXERCISE SOFTWARE..........................................................................................................................................5 SPECIAL ACCESSORIES.................................................................................................................................................5 SCHEMATICS AND BLOCK DIAGRAM............................................................................................................................5 EQUIPMENT MODIFICATIONS.......................................................................................................................................5 CONFIGURATION OF TEST SETUP.................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 §15.203 - ANTENNA REQUIREMENT......................................................................................................................8 STANDARD APPLICABLE..............................................................................................................................................8 §15.205, §15.209, §15.227(A) - RADIATED EMISSIONS TEST ..............................................................................9 STANDARD APPLICABLE..............................................................................................................................................9 MEASUREMENT UNCERTAINTY....................................................................................................................................9 EUT SETUP..................................................................................................................................................................9 EMI TEST RECEIVER SETUP.......................................................................................................................................10 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................10 CORRECTED AMPLITUDE & MARGIN CALCULATION.................................................................................................10 TEST RESULTS SUMMARY..........................................................................................................................................10 TEST DATA................................................................................................................................................................11 §15.227(B) – OUT OF BAND EMISSIONS ..............................................................................................................13 STANDARD APPLICABLE............................................................................................................................................13 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................13 TEST PLOT.................................................................................................................................................................13 DynaPoint (Dong Guan) Inc. FCC ID: RYLH3GH-5001 Report No.: RSZ07122403.doc Page 3 of 14 FCC PART 15.227 Report GENERAL INFORMATION Product Description…

Text truncated - open the document above for the full version.

Test Setup Photos Radiated Emissions - Front View (Below 30 MHz) Radiated Emissions - Rear View (Below 30 MHz) Radiated Emissions - Front View (30-1000 MHz) Radiated Emissions - Rear View (30-1000 MHz)