S5SDP68806COMMUNICATION RECEIVER

1 Pager USER’S Guide re-set button chirper sound level On/Off switch Power indicator led , first stage violation led , second stage violation led, communication led LCD Display 2 . Please follow the FDA Food Code and your local Health departments rules and regulations when installing any device in your establishment. When installing your D-Mometer® Pager please follow all of the recommendations: 1) Place on a clean, dry and level surface. ( not closer than 12 inches from the floor) Do Not place on floor. 2) Surface of shelf must be of approved surface and construction by FDA Food Code and your local Health Department’s rules and regulations. 3) Place in an area that can have a clear unobstructed view of the D-Mometer ® Pager front, top and sides. 4) Do Not place on door, moving parts, moving shelves, on top of food or food container. 5) Turn pager On and adjust the chirper to desired setting . allow 30 minutes for communication to system . The Pager with automatically start communicating to the D-Mometer 232T device and D-Mometer repeater if installed . The pager will display temperature violations of your system and you can be informed promptly if you refrigeration units are operating according to guidelines and if any temperature violations have occurred . Care and Maintenance For proper use and function of your D-Mometer Repeater please follow the manufacturer’s guidelines. 1) Make sure device is clean and dry. Do not expose to liquids. Do not expose to humidity. 2) Make sure there are no liquid or solid materials on or near device. 3) Wipe with soft towel and keep level. 4) Do not drop, or hit with any objects or cause damage to the D-Mometer ® Repeater. 5) Do not tamper with device, or open casing, remove or replace labels, stickers, wires or components. This will void warranty. Installation and Use 3 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the device. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Limited Warranty If within 30 days of original purchase, this device is defective or does not work properly, RMD Technologies, LLC will repair or replace the device providing customer has registered the device within 30 days of original purchase, has original purchase documents and has a confirmed registration of warranty. Please visit www.D-Mometer.com for additional details and product warranty information request form and submittal. Address for returning your device: RMD Technologies, LLC, 635 West Michigan Street, Orlando FL. 32805 Attention returns department Preparation for shipping your product: Please repack your device in a durable box, preferably in the original carton, and send it prepaid and adequately insured. Include the original invoice and documentation of product registration along with description of issue, or a copy of the product return form from our website. For further information please send all inquiries to [email protected]. The D-Mometer ® Pager has a 1 year Limited Warranty. The 1 year Limited Warranty of this product is from date of its original purchase. This warranty does not cover: damage or failure caused by or attributable to abuse, misuse, water or moisture damage, failure to follow instructions in the user’s guide, failure to adhere to manufacturers recommendation’s for placement and use, failure to adhere to manufacturer’s recommendation’s improper installation or maintenance, 4 any alteration or accidental damage, Acts of God (such as floods, or lightning) or excess voltage or current. damage due to any type of liquid or solid material, consumables such as batteries, wear and tear, or cosmetic damage, transportation, shipping or insurance costs, costs of product removal, installation, set-up service, adjustments or reinstallation, and claims by any other person other than original purchaser. Should a problem occur that is covered by this limited warranty, RMD Technologies, LLC will, at its option, repair or replace the device. RMD Technologies, LLC Expressly disclaims all warranties and conditions not stated in this limited warranty. Any implied warranties that may be imposed by law, including the implied warranty of merchantability and, if applicable, the implied warranty of fitness for a particular purpose, shall expire on the expiration of the stated warranty period. Except as described above, RMD Technologies, LLC shall have no liability or responsibility to the purchaser of the product or any other person or entity with respect to any liability, loss or damage caused directly or indirectly by use or performance of the product or arising out of any breach of this warranty, including, but not limited to, any damages resulting from inconvenience and any loss lf time, data, property, revenue, or profit and any indirect, special, incidental, or consequential damages, even if RMD Technologies, LLC has been advised of the possibility of such damages. This Li…

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details Test model No.: D-Mometer Pager

The label was printed on the shell, 16*50mm D-MOMETER® PAGER FCC ID： S5SDP68806 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RMD Technologies LLC www. D-MOMETER. com

1 Photographs - EUT Constructional Details Test model No.: D-Mometer Pager

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140100041403 Page : 1 of 17 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 COVER PAGE FCC REPORT Application No. : SZEM1401000414RF(SGS GZ No.:GZEM1401000388RF) Applicant: Guangzhou Wong Da Hardware & Knitwear co., Ltd. Manufacturer: Guangzhou Wong Da Hardware & Knitwear co., Ltd. Factory: Guangzhou Wong Da Hardware & Knitwear co., Ltd. Product Name: D-Mometer Pager Model No.(EUT): D-Mometer Pager FCC ID: S5SDP68806 Standards: 47 CFR Part 15B (2013) Date of Receipt: 2014-03-20 Date of Test: 2014-03-28 to 2014-04-08 Date of Issue: 2014-04-09 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140100041403 Page : 2 of 17 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 2 Test Summary Test Item Test Requirement Test method Result Radiated Emission 47 CFR Part 15B ANSI C63.4 (2009) PASS Conducted Emission (150KHz to 30MHz) 47 CFR Part 15B ANSI C63.4 (2009) PASS SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140100041403 Page : 3 of 17 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 3 Contents Page 1 COVER PAGE .............................................................................................................................................…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: D-Mometer Pager 1.1 Conducted Emission Test Setup 1.2 Radiated Emission Test Setup