S6J1084Optical Finger Sensor Tri-Scan Reader

Triscan 1084 User Guide Technology Solutions UK Ltd Suite C, Loughborough Technology Centre, Epinal Way, Loughborough, Leicestershire, LE11 3GE, United Kingdom. Tel: +44 (0) 1509 238248 Fax: +44 (0) 1509 220020 Email: [email protected] Triscan 1084 User Guide V13.doc 1084 Technology Solutions (UK) Ltd reserves the right to change the specifications of products and services without notice. No part of this document may be reproduced in any form without the written consent of the author. Page 2 of 19 © 2009 TSL. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Technology Solutions (UK) Ltd. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. Technology Solutions (UK) Ltd (TSL) reserves the right to make changes to any product to improve reliability, function, or design. TSL does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which TSL products might be used. An implied license exists only for equipment, circuits, and subsystems contained in TSL products. TSL and the TSL logo are registered trademarks of TSL. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. TSL grants to the user a non-transferable and non- exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of TSL. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from TSL. The user agrees to maintain TSL’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. TSL reserves the right to make changes to any software or product to improve reliability, function, or design. TSL does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. Triscan 1084 User Guide V13.doc 1084 Technology Solutions (UK) Ltd reserves the right to change the specifications of products and services without notice. No part of this document may be reproduced in any form without the written consent of the author. Page 3 of 19 Contents: 1 Introduction ..................................................................................................................................... 4 2 Parts of the Tri-Scan 1084 ............................................................................................................ 5 3 Attaching to an MC70/75 .............................................................................................................. 6 4 Detaching from an MC70/75 ........................................................................................................ 7 5 Using the Tri-Scan 1084 ............................................................................................................... 8 5.1 Driver and software installation ............................................................................................ 8 5.2 Contact smartcard operation ................................................................................................ 8 5.3 Contactless smartcard and RFID operation ....................................................................... 9 5.4 Compatible peripherals ......................................................................................................... 9 5.5 ActiveSync ............................................................................................................................ 10 6 Troubleshooting and Maintenance ............................................................................................ 11 6.1 Maintenance ......................................................................................................................... 11 6.2 Troubleshooting.................................................................................................................... 11 7 Technical specifications .............................................................................................................. 13 7.1 Summary of specifications .................................................................................................. 13 7.2 Pin-outs ................................................................................................................................. 15 7.3 Regulatory Information ........................................................................................................ 16 7.4 Health and Safety Recommendations .............................................................................. 17 8 Waste Electrical and Electronic Equipment (WEEE) .............................................................. 18 9 Warranty .....................…

Text truncated - open the document above for the full version.

1084 External Photos.doc 1084 External Photos 1084 External Photos.doc 1084 Page 2 of 5 Contents 1 Front view of product ..................................................................................................................... 3 2 Rear view of product...................................................................................................................... 4 3 Product attached to PDA .............................................................................................................. 5 History Version Date Modifications 1.0 23/03/2010 Document Creation 1084 External Photos.doc 1084 Page 3 of 5 1 Front view of product 1084 External Photos.doc 1084 Page 4 of 5 2 Rear view of product 1084 External Photos.doc 1084 Page 5 of 5 3 Product attached to PDA

1084 . Page 1 of 1 ID label The ID label is 1.8” × 0.4”. It is fixed behind a window in the main product label which is printed on 0.125mm velvet polycarbonate with a 3M 468MP adhesive backing or equivalent. The small size of the RFID reader and its identification label prevent the compliance statement from being printed on the product. The compliance statement will be printed in the User Manual. ID label location The ID label is fitted to the rear of the product as shown below:

1084 Internal Photos.doc 1084 Internal Photos 1084 Internal Photos.doc 1084 Page 2 of 8 Contents 1 Top view of Main PCB ................................................................................................................... 3 2 Rear view of main PCB with antenna PCB fitted ...................................................................... 4 3 Rear view of top cover with fingerprint module fitted ................................................................ 5 4 Internal view of both front and rear ............................................................................................. 6 5 Front view of connector PCB ....................................................................................................... 7 6 Rear view of connector PCB ........................................................................................................ 8 History Version Date Modifications 1.0 23/03/2010 Document Creation 1084 Internal Photos.doc 1084 Page 3 of 8 1 Top view of Main PCB 1084 Internal Photos.doc 1084 Page 4 of 8 2 Rear view of main PCB with antenna PCB fitted 1084 Internal Photos.doc 1084 Page 5 of 8 3 Rear view of top cover with fingerprint module fitted 1084 Internal Photos.doc 1084 Page 6 of 8 4 Internal view of both front and rear 1084 Internal Photos.doc 1084 Page 7 of 8 5 Front view of connector PCB 1084 Internal Photos.doc 1084 Page 8 of 8 6 Rear view of connector PCB

Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 Date: March 25, 2010 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Technology Solutions (UK) Ltd Equipment: 1084-03-SO-TSR FCC ID: S6J1084 FCC Rules: 15.225 Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, Greg Corbin Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 List Of Exhibits (FCC Certification (Transmitters) - Revised 9/28/98) Applicant: Technology Solutions (UK) Ltd FCC ID: S6J1084 By Applicant: 1. Letter Of Authorization 2. Identification Drawings Id Label Location Info Attestation Statement (S) Location of Compliance Statement 3. Documentation: 2.1033(B) (3) User Manual (S) (4) Operational Description (5) Block Diagram (5) Schematic Diagram (7) External Photographs Internal Photographs Parts List Active Devices By Compliance Testing: A. Testimonial & Statement of Certification B. Statement of Qualifications Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 Test Report for FCC ID: S6J1084 Model: 1084-03-SO-TSR to Federal Communications Commission Rule Part(s)15.225 Date Of Report: March 25, 2010 On the Behalf of the Applicant: Technology Solutions (UK) Ltd Suite C, Loughborough Technology Centre, Epinal Way, Loughborough, Leicestershire, United Kingdom LE11 3GE Attention of: David Evans Ph: +44 (0) 1509 238248 Fax: +44 (0) 1509 220020 E-mail: [email protected] Supervised By: Greg Corbin Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 Test Report Revision History Revision Date Revised By Reason for revision 1.0 March 25, 2010 Greg Corbin Original Document Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 The applicant has been cautioned as to the following: 15.21 Information to User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 Testimonial And Statement Of Certification This is to certify that: 1. That the application was prepared either by, or under the direct supervision of, the undersigned. 2. That the technical data supplied with the application was taken under my direction and supervision. 3. That the data was obtained on representative units, randomly selected. 4. That, to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. Certifying Engineer: Greg Corbin Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 Table Of Contents Rule Description Page Test Report 1 2.1033(c) General Information Required 2 Standard Test Conditions and Engineering Practices 4 Test Results Summary 5 15.225(a)(b)(c)(d) Field Strength 6 15.225(e) Frequency Stability 7 15.209 Radiated Emissions 8 15.207. Powerline Conducted Emissions 9 RSS 210 99% Occupied Bandwidth 10 . Test Equipment Utilized 11 Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 Page 1 of 11 (866) 311-3268 phone, (480) 926-3598 fax p1020019, d1030021 Rev 1.0 Required information per ISO 17025-2005, paragraph 5.10.2: a) Test Report b) Laboratory: (FCC: 933597) (IC: 2044A-1) Compliance Testing 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d1030021 d) Client: Technology Solutions (UK) Ltd e) Identification: 1084-03-SO-TSR Description: Optical Finger Sensor Tri-Scan Reader f) EUT Condition: Not required unless specified in individual tests. g) Report Date: March 25, 2010 h, j, k): As indicated…

Text truncated - open the document above for the full version.

Page 1 of 2 Test Setup Photos: Technology Solutions – 1084-03-SO-TSR Radiated Emissions Radiated Emissions #2 Page 2 of 2 Transmitter Test