SBL-802DMBluetooth Car Kit

CK802D Quick Guide Introduction The CK802D Bluetooth Car Kit provides hands-free communication using cell phones. It requests no professional installation. This user guide focuses on establishing a connection with your mobile phone. You need to have a phone with embedded Bluetooth capability. The phone can be tucked away in your pocket or in a bag while you handle incoming call and outgoing calls, and adjust the volume up or down using the buttons on the car kit. The power for the CK802D comes from the car cigarette lighter jack. This device utilizes Bluetooth wireless technology. Any device that you want to work with this car kit must be compatible with Bluetooth technology version 1.2. that supports Bluetooth HEADSET and/or HANDSFREE profile. Product Outlook CK802D specifications Compatible: Bluetooth 1.2 HEADSET profile and HANDSFREE profile Pairing distance: It is recommended that CK802D and phone distance is as close as possible with no solid objects in between. Working distance: Up to 3 meters (best fit in the car) Frequency band: 2.4GHz ISM band Speaker power: 1W Power: 12V~24V cigarette lighter jack Power consumption: 500mA during talk Setting Up 1. Plug the car cigarette lighter head into the cigarette lighter. 2. You can loosen the FIXING SCREW to adjust the CK802D to fit your car. You can also adjust MICROPHONE tube to increase sound sensitivity.. * When you turn off the engine, the Car Kit will memorize the latest power status. Pairing 1. Ensure the car kit is switched off. 2. Hold the “Hang Up “button more than 6 seconds until you see an LED flashing rapidly and you will hear a rising and falling tone. 3. Ensure that the mobile phone is less than 1 meter away and that Bluetooth is activated in your mobile phone. 4. Put your mobile phone in search for new Bluetooth devices. If you are asked for a PIN number in the mobile phone, note that the PIN number is “1234”. 5. If pairing has been completed successfully a two-tone signal shall be heard. 6. Every time you switch on the Car Kit, it will attempt connection to the last mobile phone that you have it paired to. 7. Pairing will timeout after 60 seconds at which a two-tone signal will be heard. * When you use CK802D at the first time (in factory setting mode), it will get into the pairing mode automatically AUTO ANSWERING or MANUAL ANSWERING Switch it up or down for selecting AUTO ANSWERING or MANUAL ANSWERING for an incoming call. If “M” appears on the switch it means that MANUAL ANSWERING is enabled. Answer the call using the answer button on the kit. If “A” appears on the switch it means that AUTO ANSWERING is enabled. The call will answer automatically after 1 - 3 rings or depends upon your mobile phone setting. Storage of car kit 1. Always store CK802D safely. It is not suitable for children. 2. Avoid storage in direct constant sun light. 3. Do not expose CK802D or any of its supplied parts to rain or other liquids. 4. If you wish to clean CK802D, please use dry and soft cloth. Notice Please make sure that the Car Kit has been shut-down before you leaving the car. Because some kind of cars still supply power to cigarette lighter jack after you turn off the engine. Function Matrix Function Pick Up Hang Up Volume+ Volume- State Power On ++ Power Off Power Off ++ Power On Pick Up + Receive Calling Hang Up + During Communication Volume+ + During Communication Volume- + During Communication Voice Dialing + Standby Last Call Redial v v Standby Pairing +++ Power Off Transfer(Mobile Phone & Car kit) ++ During Communication Mute ++ During Communication Cancel Mute ++ During Communication Refuse Answering ++ Receive Calling Restore Factory settings ++ ++ Standby 「Short Click: “＋”」 ：Clip and release less than 1 second 「Long Press: “＋＋”」 ：Press and release for 2 seconds 「Double Click: “v v”」 ：Click twice within 0.5 second 「Press and Hold: “＋＋＋”」 ：Press and hold the key for more than 6 seconds 5. Certification and Safety Approvals/General Information 1. The device is CE、FCC and E-mark approved. 2. Federal Communication Commission(FCC) Statement： a. Rule15.21：You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. b. Rule15.105（b）：This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 3. Bluetooth is a trade mark owned by Bluetooth SIG, Inc. Caution 1. Important information regarding safe and efficient operation. Read this information before using the product. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Operation is subject to the following two conditions: a. this device may not cause harmful interference, and b. this device must accept any interference received, including interference that may cause undesired operation of the device. 3. FCC RF Radiation Exposure …

Text truncated - open the document above for the full version.

CK802M Quick Guide Introduction The CK802D Bluetooth Car Kit provides hands-free communication using cell phones. It requests no professional installation. This user guide focuses on establishing a connection with your mobile phone. You need to have a phone with embedded Bluetooth capability. The phone can be tucked away in your pocket or in a bag while you handle incoming call and outgoing calls, and adjust the volume up or down using the buttons on the car kit. The power for the CK802D comes from the car cigarette lighter jack. This device utilizes Bluetooth wireless technology. Any device that you want to work with this car kit must be compatible with Bluetooth technology version 1.2. that supports Bluetooth HEADSET and/or HANDSFREE profile. Product Outlook CK802D specifications Compatible: Bluetooth 1.2 HEADSET profile and HANDSFREE profile Pairing distance: It is recommended that CK802D and phone distance is as close as possible with no solid objects in between. Working distance: Up to 3 meters (best fit in the car) Frequency band: 2.4GHz ISM band Speaker power: 1W Power: 12V~24V cigarette lighter jack Power consumption: 500mA during talk Setting Up 1. Plug the car cigarette lighter head into the cigarette lighter. 2. You can loosen the FIXING SCREW to adjust the CK802D to fit your car. You can also adjust MICROPHONE tube to increase sound sensitivity. * When you turn off the engine, the Car Kit will memorize the latest power status. Pairing 1. Ensure the car kit is switched off. 2. Hold the “Hang Up “button more than 6 seconds until you see an LED flashing rapidly and you will hear a rising and falling tone. 3. Ensure that the mobile phone is less than 1 meter away and that Bluetooth is activated in your mobile phone. 4. Put your mobile phone in search for new Bluetooth devices. If you are asked for a PIN number in the mobile phone, note that the PIN number is “1234”. 5. If pairing has been completed successfully a two-tone signal shall be heard. 6. Every time you switch on the Car Kit, it will attempt connection to the last mobile phone that you have it paired to. 7. Pairing will timeout after 60 seconds at which a two-tone signal will be heard. * When you use CK802D at the first time (in factory setting mode), it will get into the pairing mode automatically External microphone Rear mic-in jack is possibly to connect an external microphone to collect better voice output. Storage of car kit 1. Always store CK802D safely. It is not suitable for children. 2. Avoid storage in direct constant sun light. 3. Do not expose CK802D or any of its supplied parts to rain or other liquids. If you wish to clean CK802D, please use dry and soft cloth Notice Please make sure that the Car Kit has been shut-down before you leaving the car. Because some kind of cars still supply power to cigarette lighter jack after you turn off the engine. Function Matrix Function Pick Up Hang Up Volume+ Volume- State Power On ++ Power Off Power Off ++ Power On Pick Up + Receive Calling Hang Up + During Communication Volume+ + During Communication Volume- + During Communication Voice Dialing + Standby Last Call Redial v v Standby Pairing +++ Power Off Transfer(Mobile Phone & Car kit) ++ During Communication Mute ++ During Communication Cancel Mute ++ During Communication Refuse Answering ++ Receive Calling Restore Factory settings ++ ++ Standby 「Short Click: “＋”」 ：Clip and release less than 1 second 「Long Press: “＋＋”」 ：Press and release for 2 seconds 「Double Click: “v v”」 ：Click twice within 0.5 second 「Press and Hold: “＋＋＋”」 ：Press and hold the key for more than 6 seconds Certification and Safety Approvals/General Information 1. The device is CE、FCC and E-mark approved. 2. Federal Communication Commission(FCC) Statement： a. Rule15.21：You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. b. Rule15.105（b）：This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 3. Bluetooth is a trade mark owned by Bluetooth SIG, Inc. Caution 1. Important information regarding safe and efficient operation. Read this information before using the product. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Operation is subject to the following two conditions: a. this device may not cause harmful interference, and b. this device must accept any interference received, including interference that may cause undesired operation of the device. 3. FCC RF Radiation Exposure Statement： This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operation instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operation in conjunction with any other antenna or transm…

Text truncated - open the document above for the full version.

Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 2 PHOTOGRPHS OF EUT Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw All of EUT (mode: CK802D) Front View of EUT (mode: CK802D) Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Back View of EUT (mode: CK802D) Left View of EUT (mode: CK802D) Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Right View of EUT (mode: CK802D) Top View of EUT (mode: CK802D) Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Bottom View of EUT (mode: CK802D) All of EUT (mode: CK802M) Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification…

Text truncated - open the document above for the full version.

FCC ID LABEL FORMAT AND LOCATION Applicant: Global Target Enterprise Inc. FCC ID: SBL-802DM

Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 3 PHOTOGRPHS OF EUT Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Open View of EUT-1(mode: CK802D) Open View of EUT-2(mode: CK802D) Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 1(mode: CK802D) Internal of EUT – 2(mode: CK802D) Antenna Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Open View of EUT-1 (mode: CK802M) Open View of EUT-2 (mode: CK802M) Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 1 (mode: CK802M) Internal of EUT – 2 (mode: CK802M) Antenna

RF EXPOSURE STATEMENT 1. Standard Applicable According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a portable device. 2. Measurement Result: This is a portable device and the Max peak output power is -1.32dBm (0.00074W) lower than low threshold 60/fGHz mW (24.48mW), d<2.5cm in general population category. The SAR measurement is not necessary.

Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 Page: 1 of 52 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the con- tent or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意 此條款列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面 許可，不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: Bluetooth Handsfree Car Kit Brand Name: N/A Model Name: CK802D,CK802M FCC ID: SBL-802DM Report No.: ER/2006/60017 Issue Date: Jul. 31, 2006 FCC Rule Part: §15.247 Prepared for: Global Target Enterprise Inc. 5F, No. 186, Sec. 2, Chung Hsin Road, Hsin Tien, Taipei Hsien Prepared by: SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 Page: 2 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw VERIFICATION OF COMPLIANCE Applicant: Global Target Enterprise Inc. 5F, No. 186, Sec. 2, Chung Hsin Road, Hsin Tien, Taipei Hsien Equipment Under Test: Bluetooth Handsfree Car Kit Brand Name: N/A FCC ID Number: SBL-802DM Model No.: CK802D,CK802M Model Difference: CK802D has a slide switch whereas CK802M has a microphone line in socket File Number: ER/2006/60017 Date of test: Jun. 24, 2006 ~ Jul. 28, 2006 Date of EUT Received: Jun. 23, 2006 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 The test results of this report relate only to the tested sample identified in this report. Test By: Date Jul. 31, 2006 Alex Hsieh Prepared By: Date Jul. 31, 2006 Gigi Yeh Approved By: Date Jul. 31, 2006 Vincent Su Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 Page: 3 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Version Version No. Date 00 Jul. 31, 2006 Report No ER/2006/60017 FCC ID: SBL-802DM Issue Date: Jul. 31, 2006 Page: 4 This document is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.sgs.com. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 此報告是遵循本公司訂定之通用服務條款所製作發放, 請注意此條款 列印於背面，亦可在www.sgs.com 中查閱。將本公司之義務，免責，管轄權皆明確規範之。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可，不 可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Ta…

Text truncated - open the document above for the full version.