SERSP1Digital Action Cam

Digital Action Cam SP1 User Manual 1 Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: 1411 W. 190th Street, Suite 550, Gardena, CA 90248, USA Company Website: www.kodakcamera.jkiltd.com For Customers in Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. For Customers in Europe "CE" mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. "CE" marked products are intended for sales in Europe. This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of electrical waste and electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please use the return and collection systems available in your country for proper, safe disposal of this product. BEFORE YOU START 2 For Customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio / TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. &KDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFH could void the user's authority to operate the equipment. 3 About this Manual Thank you for purchasing this product. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging Ltd . reserves all rights to this manual. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd . .  $OOWUDGHPDUNVPHQWLRQHGLQWKLVPDQXDODUHXVHGIRULGHQWL¿FDWLRQSXUSRVHVRQO\DQGDUH properties of their respective owners. This manual provides you with instructions on how to use your new KODAK PIXPRO Digital Action Cam. Every effort has been made to ensure that the contents of this manual are accurate. However, JK Imaging Ltd. reserves the right to make changes without notice. Throughout this manual, the following symbols are used to help you locate information quickly and easily: Indicates useful information. Indicates precautions are to be taken while operating the product. In this Manual, digital action cam is referred to as action cam. 4 SAFETY NOTES Waterproof / Dustproof / Shockproof / Freeze-proof ‡ -,6,(&ZDWHUSURRIJUDGH ,3;  ‡ -,6,(&GXVWSURRIJUDGH ,3;  ‡Height for shockproof rating is 2.0m. ‡Suitable temperature range for freeze proof capability is -10°C and above. Product Notes: ‡Do not disassemble or repair the product by yourself. ‡ 'RQRWKHDYLO\GURSRUNQRFNWKLVSURGXFW Improper handling may damage this product. ‡ $YRLGWRXFKLQJWKH/HQV&RYHUDQG lens element please use professional lens cleaning paper together with lens cleaning agents to wipe the lens and keep the lens clean. ‡ 'RQRWXVHFRUURVLYHDOFRKROLFRU organic-solvent-containing cleaners to wipe this product. ‡ 'RQRWXVHRUVWRUHWKLVSURGXFWLQKLJK temperature environment. ‡ 'RQRWH[SRVHWKHOHQVWRVWURQJOLJKW sources (e.g. Daylight, etc.) for extended periods of time. ‡ 'RQRWXVHRUVWRUHWKHSURGXFWLQVWURQJ PDJQHWLF¿HOGHQYLURQPHQW ‡ ,IWKHSURGXFWLVTXLFNO\WUDQVIHUUHGIURP a low temperature environment to a high temperature environment, water condensation may occur in the product due to physical changes. In this case, it is recommended to wait until the product returns to room temperature before you turn it on. ‡ ,IDSKRWRRUYLGHRFDQQRWEHSOD\HGEDFN due to human-caused improper operation, the Company shall assume no liability or responsibility for compensation. ‡ 6WRUHWKHSURGXFWLQDGU\DQGFOHDQ environment when you are going to store the product for a long period of time. 5 ‡If there is dust, sand or other foreign materials on the waterproof rubber of the rear cover and its contact surface, please wipe it with a clean, dry and lint free cloth timely. ‡To ensure the waterproof capability of the product, make sure before using that there is no damage to or foreign matters in the waterproof rubber, and then close the rear cover tightly. Waterproof rubber with …

Text truncated - open the document above for the full version.

AOF Imaging Technology(Shenzhen) Co., Ltd. Lisonglang The Second Industrial Zone, Gongming Street, Shenzhen City, Guangdong Province, China DATE :2013-8-30 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Hans.Hu of Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong (Name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with AOF Imaging Technology(Shenzhen) Co., Ltd. and Lisonglang The Second Industrial Zone, Gongming Street, Shenzhen City, Guangdong Province, China ( applicant name and address). Dated this / Day of 8/30/2013 / Agency agreement expiration date: 8/30/2014 By: Yunlong Lei Signature Printed Title: Manager On behalf of : AOF Imaging Technology( Shenzhen) Co., Ltd. Telephone: 0755-27165959

Date: 8/30/2013 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: SERSP1 To Whom It May Concern: We, AOF Imaging Technology(Shenzhen) Co., Ltd., are applying FCC DOC for product Digital Action Cam which model no. is PIXPRO SP1. the FCC DOC is doing at proper FCC authorized and recognized lab, and FCC DOC will be issued soon. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature Client’s name / title Yunlong Lei / Manager Contact information / address Tel: 0755-27165959 Address: Lisonglang The Second Industrial Zone, Gongming Street, Shenzhen City, Guangdong Province, China

AOF Imaging Technology(Shenzhen) Co., Ltd. Lisonglang The Second Industrial Zone, Gongming Street, Shenzhen City, Guangdong Province, China 2013-8-30 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: SERSP1 Product Name: Digital Action Cam Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 8/30/2013 By: Yunlong Lei Signature Printed Title: Manager On behalf of : AOF Imaging Technology(Shenzhen) Co., Ltd. Telephone: 0755-27165959

KODAK PIXPRO SP1 Digital Action Cam www.kodakcamera.jkiltd.com The Kodak trademark and trade dress are used under license from Kodak. Model: PIXPRO SP1 FCC ID:SERSP1 IC:11195A-SP1 Rated: 5V 1A Made in China DV122 5:1 VR259081299 2013.07.01 梁鑫軍 梁鑫軍 劉靜 -EU 霧膜 26 序列號打印範圍 10 C=1 33.2 3-R1 1 1 S 0 1 S 0 1 SS SS SP1 S01 SP1 S01 +0 -0.1 01 01 Label location

Global United Technology Services Co., Ltd. Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 1 FCC ID:SERSP1 The device has a standalone transmission. According to KDB 447498 section 4.3.1, the 1-g SAR test exclusion thresholds at test separation distances 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[f(GHz)]  3.0 The maximum tune-up limit power is 7.92dBm(6.19mW) @ 2.437GHz For the head and body SAR, use 5mm as the conservative minimum test separation distance, [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[f(GHz)] =2.49 3.0 So standalone SAR measurements are not required for both head and body. =1.93<3

Global United Technology Services Co., Ltd. Report No.: GTSE13060089701 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC REPORT Applicant: AOF Imaging Technology(Shenzhen) Co., Ltd. Address of Applicant: Lisonglang The Second Industrial Zone, Gongming Street, Shenzhen City, Guangdong Province, China Equipment Under Test (EUT) Product Name: Digital Action Cam Model No.: PIXPRO SP1 Trade Mark: KODAK FCC ID: SERSP1 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247:2012 Date of sample receipt: August 12, 2013 Date of Test: August 12-15, 2013 Date of report issued: August 15, 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE13060089701 Global United Technology Services Co., Ltd. Project No.: GTSE130600897RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 60 2 Version Version No. Date Description 00 August 15, 2013 Original Prepared By: Date: August 15, 2013 Project Engineer Check By: Date: August 15, 2013 Reviewer Report No.: GTSE13060089701 Global United Technology Services Co., Ltd. Project No.: GTSE130600897RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 60 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION ......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE ........................................................................................................................................ 6 5.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 5.5 TEST FACILITY .................................................................................................................................... 7 5.6 TEST LOCATION ................................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 ANTENNA REQUIREMENT: .................................................................................................................... 9 7.2 CONDUCTED EMISSIONS ................................................................................................................... 10 7.3 CONDUCTED PEAK OUTPUT POWER .................................................................................................. 13 7.4 CHANNEL BANDWIDTH ...................................................................................................................... 17 7.5 POWER SPECTRAL DENSITY ............................................................................................................. 21 7.6 BAND EDGES .................................................................................................................................... 25 7.6.1 Conducted Emission Method ..................................................................................................... 25 7.6.2 Radiated Emission Method ........................................................................................................ 27 7.7 SPURIOUS EMISSION ......................................................................................................................... 31 7.7.1 Conducted Emission Method ..................................…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission