SFK-WF0613A2.4GHz&5GHz 3x3 Outdoor AP

WF-0613A User Manual 8th Oct, 2013 VERSION 1 CAMBRIDGE Industries (Group) Co Ltd. CIG CAMBRIDGE Industries (Group) Co Ltd. CIG Notice CIG has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice, CIG has the final interpretation. This version is effective in the two months since the release date. TABLE OF CONTENTS 1 Safety ........................................................................................................................... 3 2 Overview ...................................................................................................................... 3 3 Installation of device .................................................................................................... 6 3.1 Installation tools and environment ............................................................................................. 6 3.2 Installation Steps ....................................................................................................................... 6 4 Indicators ..................................................................................................................... 8 5 Thin AP mode basic configuration ............................................................................... 9 5.1 Login to the Web interface and setting from FAT AP mode ..................................................... 9 5.2 Login to the Web interface and setting from Thin AP mode ................................................... 11 6 Thin AP uplink debug mode ....................................................................................... 12 Notice CIG has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice, CIG has the final interpretation. This version is effective in the two months since the release date. 1 Safety  Do not install the device near the power line, electric lamp, power grid, or in any forceful power grid place, which is to avoid the AP abnormal work.  Ensure the power adapter is grounded well if install the device indoor.  Install other lightning protection equipment near the device if necessary, because the limitation of lightning protection module inside the device is 6KV.  Use the steady power grid to provide the power to the device, which is to avoid the abnormal work.  Use a less than 100m network cable to connect the PoE port, which is to acquire the steady power. The network cable complies with the DC resistance definition in the YD/926.2 protocol. 2 Overview This document is used to describe the operation instruction of WF-0613A. WF-0613A is a multifunctional outdoor wireless access point product. It is mainly used for carriers to provide stable outdoor Wi-Fi coverage and long distance wireless backhaul, to achieve high-quality, stable and convenient broadband service. It provides the most economical and effective way for last 1 km solution. Having perfect compatibility, WF-0613A works with most wireless terminals and CPEs to builds a high capacity Wi-Fi system, which provides a solution of the fastest return on investment (ROI) for the operators. WF-0613A has some perfect features like excellent performance, powerful function, flexible pattern, convenient installation and so on. Notice CIG has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice, CIG has the final interpretation. This version is effective in the two months since the release date. Figure 1 Network Application for indoor coverage Figure 1 Network Application for cellular coverage Notice CIG has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice, CIG has the final interpretation. This version is effective in the two months since the release date. Figure 2 Network Application for wireless bridge Notice CIG has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice, CIG has the final interpretation. This version is effective in the two months since the release date. 3 Installation of device 3.1 Installation tools and environment  Installation tools: A laptop, super category5 outdoor network cables, a screwdriver, two wrenches, screws and a pole (optional).  Installation environment: Need to ensure that it is visible between the AP and terminals and no tall obstacles between them. 3.2 Installation Steps 1. Mount the AP on the pole, and should confirm AP is fixed well. Use one RJ45 cable or SFP to connect the AP POE port. Figure4 Ports of the WF-0613A Notice CIG has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice, CIG has the final interpretation. This version is effective in the two months since the release date. Figure5 Pole mounting 2. Connect the WAN POE port of the WF-0613A and the POE port of the adaptor by a network cable, and connect the LAN port of the adaptor and another network device (Laptop, switch etc.) by another network cable (or optical fiber). And then power on the adapter. Check the status of indicators of the WF-0613A. The detail Indicators refer to Figure 7. Notice CIG has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice, CIG has the final interpretation. This version…

Text truncated - open the document above for the full version.

CIG Shanghai Co., Ltd Date: November 23, 2013 Federal Communications Commission Authorization and Evaluation Division FCC ID: SFK-WF0613A ATTESTATION FCC ID: SFK-WF0613A Product: 2.4GHz&5GHz 3x3 Outdoor AP Model: WF-0613A We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Ma Zhonghua CIG Shanghai Co., Ltd

CIG Shanghai Co., Ltd Declaration of Authorization We Name: CIG Shanghai Co., Ltd Address: F/23, No.889 yishan Road, Xuhui District, Shanghai Declare that: Name Representative of agent: Robin Wu Agent Company name: MRT Technology (Suzhou) Co., Ltd Address: D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: 2.4GHz&5GHz 3x3 Outdoor AP Type designation: WF-0613A Trademark: CIG on our behalf. Date: November 23, 2013 City: Shanghai Name: Ma Zhonghua Signature:

CIG Shanghai Co., Ltd Date: November 23, 2013 Federal Communications Commission Authorization and Evaluation Division FCC ID: SFK-WF0613A Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: 1. Block Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ---------------------------------------------------------- Ma Zhonghua CIG Shanghai Co., Ltd

1 of 4 External Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo

201-00666-11 2013.11.5王建朋 1 上海剑桥科技股份有限公司 技术要求: 1,标牌底色为白色NCS S 0500-N,图标印刷颜色为深灰色Pantone 432C; 2,材质为磨砂PC，厚度0.175mm； 3,标牌背面需做黑色遮光处理，并覆背胶； 4,材质、背胶、油墨等需满足如下要求： 1) 阻燃UL94_VM_0； 2) 抗UV满足EN60950-22测试要求； 3) 热变形温度≥120度; 5，产品需符合ROHS指令及绿色环保要求； 2.1 1.9 60 30 2.9 2.9 WF-0613A 2.4GHz & 5GHz 3x3 Outdoor AP POE in: 54V 1A FCC ID:SFK-WF0613A CIG SHANGHAI CO., LTD. Made in China JW0613A_型号标牌 _CIG_WF-0613A + - 0.0 0.2 +- 0.00.2

1 of 7 Internal Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo (9) EUT Photo (10) EUT Photo (11) EUT Photo (12) EUT Photo (13) EUT Photo (14) EUT Photo

MRT Technology (Suzhou) Co., Ltd Report No.: 1311RSU00104 Phone: +86-512-66308358 Fax: +86-512-66308368 Report Version: V01 www.mrt-cert.com FCC ID: SFK-WF0613A Page Number: 1 of 5 RF Exposure Evaluation Declaration FCC ID: SFK-WF0613A APPLICANT: CIG Shanghai Co., Ltd Application Type: Certification Product: 2.4GHz&5GHz 3x3 Outdoor AP Model No.: WF-0613A FCC Classification: Digital Transmission System (DTS) Unlicensed National Information Infrastructure (UNII) Reviewed By : ( Supervisor: Robin Wu ) Approved By : ( Manager: Marlin Chen ) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1311RSU00104 FCC ID: SFK-WF0613A Page Number: 2 of 5 Revision History Report No. Version Description Issue Date 1311RSU00104 Rev. 01 Initial report 2013-11-30 Report No.: 1311RSU00104 FCC ID: SFK-WF0613A Page Number: 3 of 5 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- f/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- f/1500 6 1500-100,000 -- -- 1 30 f= Frequency in MHz Calculation Formula: P d = (P out *G)/(4*pi*r 2 ) Where P d = power density in mW/cm 2 P out = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 r = distance between observation point and center of the radiator in cm (The minimum distance is 20cm) P d is the limit of MPE, 1mW/cm². If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No.: 1311RSU00104 FCC ID: SFK-WF0613A Page Number: 4 of 5 1.2. Test Result of RF Exposure Evaluation Product 2.4GHz&5GHz 3x3 Outdoor AP Test Item RF Exposure Evaluation Antenna Gain: The maximum Gain measured in fully anechoic chamber is 13dBi for 2.4GHz and 15dBi for 5GHz in logarithm scale. For 2.4G Band: Test Mode Frequency Band (MHz) Maximum Average output power (dBm) Power Density at r = 20 cm (mW/cm 2 ) Limit of Power Density S(mW/cm²) 802.11b/g/n(20MHz) 2412 ~ 2462 17.64 0.231 1 802.11n(40MHz) 2422 ~ 2452 14.09 0.102 1 For 5G ISM Band: Test Mode Frequency Band (MHz) Maximum Average output power (dBm) Power Density at r = 20 cm (mW/cm 2 ) Limit of Power Density S(mW/cm²) 80.211a/n(20MHz) 5745 ~ 5825 19.98 0.626 1 802.11n(40MHz) 5755 ~ 5795 19.88 0.612 1 For 5G UNII Band: Test Mode Frequency Band (MHz) Maximum Average output power (dBm) Power Density at r = 20 cm (mW/cm 2 ) Limit of Power Density S(mW/cm²) 80.211a/n(20MHz) 5180 ~ 5240 6.44 0.028 1 802.11n(40MHz) 5190 ~ 5230 7.89 0.039 1 Report No.: 1311RSU00104 FCC ID: SFK-WF0613A Page Number: 5 of 5 CONCULISON: Both of the WLAN 2.4GHz Band and WLAN 5GHz Band can transmit simultaneously. Therefore, the worst-case situation is: 0.231mW/cm 2 + 0.626mW/cm 2 = 0.857mW/cm 2 < 1mW/cm 2 This confirmed that the device comply with FCC 1.1310 MPE limit. The End

MRT Technology (Suzhou) Co., Ltd Report No.: 1311RSU00102 Phone: +86-512-66308358 Fax: +86-512-66308368 Report Version: V01 www.mrt-cert.com FCC ID: SFK-WF0613A Page Number: 1 of 151 MEASUREMENT REPORT FCC PART 15.407 WLAN 802.11a/n FCC ID: SFK-WF0613A APPLICANT: CIG Shanghai Co., Ltd Application Type: Certification Product: 2.4GHz&5GHz 3x3 Outdoor AP Model No.: WF-0613A FCC Classification: Unlicensed National Information Infrastructure (UNII) FCC Rule Part(s): Part 15.407 Test Procedure(s): ANSI C63.10-2009 KDB 789033 D01v01r03, KDB 662911 D01v02r01 Test Date: October 19 ~November 28, 2013 Reviewed By : ( Supervisor: Robin Wu ) Approved By : ( Manager: Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in KDB 789033 D01v01r03. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1311RSU00102 FCC ID: SFK-WF0613A Page Number: 2 of 151 CONTENTS Description Page Revision History............................................................................................................................. 4 §2.1033 General Information ....................................................................................................... 5 1. INTRODUCTION ..................................................................................................................... 6 1.1. Scope ........................................................................................................................... 6 1.2. MRT Test Location ....................................................................................................... 6 2. PRODUCT INFORMATION ..................................................................................................... 7 2.1. Equipment Description .................................................................................................. 7 2.2. Description of Available Antennas ................................................................................ 7 2.3. Frequency / Channel Opreation .................................................................................... 7 2.4. Device Capabilities ....................................................................................................... 8 2.5. Test Configuration ........................................................................................................ 8 2.6. Test Software ............................................................................................................... 8 2.7. EMI Suppression Device(s)/Modifications ..................................................................... 8 2.8. Labeling Requirements ................................................................................................. 9 3. DESCRIPTION OF TEST ...................................................................................................... 10 3.1. Evaluation Procedure ................................................................................................. 10 3.2. AC Line Conducted Emissions ................................................................................... 10 3.3. Radiated Emissions ..................................................................................................... 11 4. ANTENNA REQUIREMENTS ................................................................................................ 12 5. TEST EQUIPMENT CALIBRATION DATA ............................................................................ 13 6. MEASUREMENT UNCERTAINTY ......................................................................................... 14 7. TEST RESULT ...................................................................................................................... 15 7.1. Summary .................................................................................................................... 15 7.2. 26dB Bandwidth Measurement ................................................................................... 16 7.2.1. Test Limit ................................................................................................................ 16 7.2.2. Test Procedure used ............................................................................................... 16 7.2.3. Test Setting ............................................................................................................. 16 7.2.4. Test Setup ............................................................................................................... 16 7.2.5. Test Result .............................................................................................................. 17 7.3. Output Power Measurement ....................................................................................... 31 7.3.1. Test Limit ................................................................................................................ 31 7.3.2. Test Procedure Used .............................................................................................. 31 7.3.3. Test Setting ............................................................................................................. 31 Report No.: 1311RSU00102 FCC ID: SFK-WF0613A Page Number: 3 of 151 7.3.4. Test Setup ............................................................................................................... 31 7.3.5. Test Result .............................................................................................................. 32 7.4. Power Spectral Density Measurement ........................................................................ 35 7.4.1. Test Limit ...................................................…

Text truncated - open the document above for the full version.

MRT Technology (Suzhou) Co., Ltd Report No.: 1311RSU00105 Phone: +86-512-66308358 Fax: +86-512-66308368 Report Version: V01 www.mrt-cert.com FCC ID: SFK-WF0613A Page Number: 1 of 4 FCC ID: SFK-WF0613A APPLICANT: CIG Shanghai Co., Ltd Application Type: Certification Product: 2.4GHz&5GHz 3x3 Outdoor AP Model No.: WF-0613A FCC Classification: Digital Transmission System (DTS) Unlicensed National Information Infrastructure (UNII) Test Date: November 26 ~ 28, 2013 Co-location Report Reviewed By : ( Supervisor: Robin Wu ) Approved By : ( Manager: Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2009. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1311RSU00105 FCC ID: SFK-WF0613A Page Number: 2 of 4 Revision History Report No. Version Description Issue Date 1311RSU00105 Rev. 01 Initial report 11-29-2013 Report No.: 1311RSU00105 FCC ID: SFK-WF0613A Page Number: 3 of 4 1. TEST RESULT of Radiated Emissions for Co-located Test Mode: 2.4GHz + 5GHz Transmit Test Site: AC1 Test Engineer: Roy Cheng Polarity: Horizontal Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Mark Frequency (MHz) Measure Level (dBuV/m) Reading Level (dBuV) Margin (dB) Limit (dBuV/m) Factor Type 1 2334.500 41.008 38.126 -32.992 74.000 2.883 Peak 2 2334.550 26.482 23.600 -27.518 54.000 2.883 Average 3 * 2665.950 26.643 23.540 -27.357 54.000 3.103 Average 4 2666.000 42.722 39.619 -31.278 74.000 3.103 Peak Report No.: 1311RSU00105 FCC ID: SFK-WF0613A Page Number: 4 of 4 Test Mode: 2.4GHz + 5GHz Transmit Test Site: AC1 Test Engineer: Roy Cheng Polarity: Vertical Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Mark Frequency (MHz) Measure Level (dBuV/m) Reading Level (dBuV) Margin (dB) Limit (dBuV/m) Factor Type 1 1125.060 36.175 39.300 -17.825 54.000 -3.124 Average 2 1127.500 40.471 43.588 -33.529 74.000 -3.117 Peak 3 * 2657.480 26.467 23.400 -27.533 54.000 3.067 Average 4 2657.500 43.530 40.463 -30.470 74.000 3.067 Peak The End

1 of 3 Test Setup Photo Description: Front view of Conducted Emission Test Setup Description: Back view of Conducted Emission Test Setup Description: Radiated Emission Test Setup for 9kHz ~ 30MHz Description: Radiated Emission Test Setup for 30MHz ~ 1GHz Description: Radiated Emission Test Setup for 1GHz ~ 18GHz Description: Radiated Emission Test Setup for 18GHz ~ 40GHz