SHI-A39M01Sport Performance Monitor

Armour39™ Strap & Module User Manual Model: A39M01 Guide d’utilisation de la sangle et du module Armour39™ 2 TABLE OF CONTENTS (TABLE DES MATIÈRES) What Is Armour39™? 6 How Does Armour39™ Work? 7 What Does Armour39™ Measure? 8 System Requirements 10 In The Box 11 Getting Started 12 Armour39™ Chest Strap Information 14 Armour39™ Module Information 16 Use of Armour39™ Chest Strap & Module 18 Wearing Armour39™ Chest Strap 19 Inserting Armour39™ Module 20 Armour39™ Module: LED Pulsing & Colors 22 Storage 23 Caring for the Armour39™ Chest Strap 24 Caring for the Armour39™ Module 25 Replacing the Battery 26 Water Resistance 27 Specifications 28 Precautions 29 3 Armour39™ File Transfer/Bluetooth® 31 Armour39™ Mobile App Basics 32 Armour39™ Watch Basics 33 About Under Armour® 34 Limited Warranty 35 FCC Statement 37 IC Statement 38 Qu’est-ce que Armour39™ ? 40 Comment fonctionne Armour39™? 41 Que mesure Armour39™? 42 Configuration requise 44 Contenu de la boîte 45 Démarrage 46 Information sur la sangle pectorale Armour39™ 48 Information sur le module Armour39™ 50 Utilisation de la sangle pectorale et du module Armour39™ 52 Installation de la sangle pectorale Armour39™ 53 4 Insertion du module Armour39™ 54 Module Armour39™ : clignotement et couleurs de la DÉL 56 Rangement 57 Entretien de la sangle pectorale Armour39™ 58 Entretien du module Armour39™ 59 Remplacement de la pile 60 Imperméabilité 61 Caractéristiques techniques 62 Recommandations et mises en garde 63 Transfert de fichier et connectivité Bluetooth® pour Armour39™ 65 Information de base sur l’application mobile Armour39™ 66 Information de base sur la montre Armour39™ 67 Au sujet d’Under Armour® 68 Garantie limitée 69 Déclaration FCC 71 Déclaration IC 72 5 English Anglais 6 WHAT IS ARMOUR39™? YOUR PERFORMANCE. YOUR WILLPOWER™. DISCOVERED. Armour39™ is the sports performance monitoring system engineered to empower athletes. The system captures and displays critical information athletes need to discover their true potential. Armour39™ is the first system that detects and responds to every move athletes make – any direction, any motion, any position. So every athlete—regardless of sport or workout activity—has precise information about their performance. Armour39™ measures heart rate, calorie burn, real-time intensity and WILLpower™, Under Armour®’s unique measure that reflects overall workout difficulty in a single score. 7 HOW DOES ARMOUR39™ WORK? The Armour39™ chest strap collects athletes’ information and transfers it to the Armour39™ module in the strap. The module automatically transmits this information in real-time to a Bluetooth® Smart display device, the Armour39™ mobile app or the Armour39™ watch. The Armour39™ module is the first sensor designed to store information, allowing athletes to work out with or without the display device. 8 WHAT DOES ARMOUR39™ MEASURE? With Armour39™, athletes of all sports can measure, track, and analyze the data that matters most. Armour39™ measures heart rate, calorie burn, real-time intensity and WILLpower™, Under Armour®’s unique measure that reflects overall workout difficulty in a single score. HEART RATE A highly responsive, precise measurement of heart beats per minute. CALORIES An advanced algorithm that captures calories burned with a high degree of accuracy. This real-time measurement captures how hard an athlete is working by measuring current heart rate as a percentage of the athlete’s max heart rate. It’s proof of how hard you’re working relative to your peak ability. INTENSITY WILLPOWER™ The true measure of an athlete, it is a single score that reflects overall workout 9 IMPORTANT: Armour39™ is optimized by successful completion of the Armour39™ Assessment workout. The Assessment captures an athlete’s baseline data and informs all other Armour39™ measures, customizing the system specifically to the athlete. A user should perform the Assessment regularly, about once a month, to ensure the system takes into account an athlete’s current fitness level. difficulty on a scale of 0.0-10.0. This innovative measure combines a range of dynamic inputs including workout duration, body position, user profile, and key heart rate measures like ventilatory threshold and recovery into a proprietary algorithm. With WILLpower™, athletes can—for the first time—objectively measure a hard day versus a light day, to ensure they are training effectively to meet their goals. 10 SYSTEM REQUIREMENTS The Armour39™ Module is a Bluetooth® Smart device that is currently compatible with iOS Bluetooth® Smart Ready mobile devices and the Armour39™ Bluetooth® Smart Watch. For a complete list of compatible mobile devices, please refer to www.armour39.com. To use the Armour39™ Module and Armour39™ Chest Strap you will need at least ONE of the following: NOTE: The Armour39™ Module can only connect to the Armour39™ Watch and Armour39™ Mobile App independently. (i.e. You cannot use both the Armour39™ Watch and Armour39™ Mobile App together as a display during a workout.) SYSTEM REQUIREMENTS Armour39 Module 186 45 % 298 5.1 29:31 Armour39 Mobile App* Armour39 Chest Strap * May be used with to view past workouts OR as a replacement for the watch. You cannot use both the watch and the phone as a display during your workout. Armour39™ Mobile App Armour39™ Watch CALENDAR (MEM): ACCESSING PAST WORKOUTS 1] Accessing the Calendar Press middle button (2) from the main navigation to access Armour39 Mode. 2] Press “MEM”. Press bottom (3) button to open the past workout calendar. 4] View Workout Details Press top (2) button to view workout details. Press bottom (3) button to return to Armour39 Mode. 3] Toggle between workouts. Press middle (2) button to toggle through workout history. 11 IN THE BOX Your Armour39™ watch package should include the following items: • 1X Armour39™ Electronic Module • 1X Armour39™ Front Chest Strap • 1X Armour39™ Back Chest Strap • 1X CR2032 3V Battery (pre-installed in the Armour39™ Module) • 1X Armour39™ Us…

Text truncated - open the document above for the full version.

Request for Confidentiality Date: 14.11.2013 Subject: Confidentiality Request for: FCC ID: SHI-A39M01 IC: 10833A-A39M01 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Under Armour Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of (0) days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Manager Certification Thomas Ring Title Name 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.”

Name change of „mikes-testingpartners gmbh“ to „CSA Group Bayern GmbH“ Dear Sirs, We declare hereby that the company name has officially changed as of the 1 st of October to CSA Group Bayern GmbH. There will be no changes to existing projects. We only changed company name. Company old: mikes-testingpartners gmbh Ohmstrasse 2-4 94342 Strasskirchen Germany Company new: CSA Group Bayern GmbH Ohmstrasse 1-4 94342 Strasskirchen Germany Contact person: Thomas Ring Phone: +49 9424 9481-250 Fax: +49 9424 9481-440 Email: [email protected] Thank you for your attention in this matter. Signature: ________________________ Name: Thomas Ring Manager Certification - Global Market Access

Page 1 of 2 American Certification Body Inc. 6731 Whittier Ave, Suite C110 McLean, VA22101 Date: 19.11.2014 Under Armour Inc. Sport Performance Monitor A39M01 ATCB014856 Dear Michael, Please note our answers below. 1. You have used the name CSA Group Bayern GmbH on the letters and documents but I notice the IC website still lists Mikes Testing Partners as the company with number 3009A. Please remember to login to the IC website and change your details. For now, please provide a cover letter to confirm that CSA Group Bayern GmbH is the same company as Mikes Testing Partners GmbH. Mikes: Thank you for this information. After we have finished the current open IC certifications (bf1systems) with mikes test reports, we will change our details on the IC website. For now please see the updated cover letter confirming that CSA Group Bayern GmbH is the same company as mikes-testingpartners gmbh. 2. I know this is not great news for you but unfortunately these two transmitters need to appear on different FCC Grants. By testing to 15.249, we can see that one of them is below 1 GHz and therefore “Scope A1”; whilst the other one is above 1 GHz and “Scope A2”. Also, the transmitter below 1 GHz will be Equipment Class DXT but the transmitter above 1 GHz will be Equipment Class DXX. The only way to avoid this situation is to test to 15.247 and call them both “Scope A4” with Equipment Class DSS. (It’s probably too late for that suggestion!) Mikes: Two FCC Grants are okay. Please see two separate Forms 731. 3. The operation description rates the output power for both transmitters as 0 dBm. Theoretically, we would expect a 0 dBm transmitter to have an approximate field strength at 3m of about 95 dBuV/m (or even more). This transmitter measures 75 dBuV/m and 77 dBuV/m peak. Please confirm that it was transmitting at maximum power and that the manufacturer is happy with those power levels. Mikes: We confirm, it was transmitting at maximum power and that the manufacturer is happy with those power levels. 4. For our records, please clarify the relationship between BlueRobin and Under Armour Inc. The documentation shows that Under Armour is responsible for the product and the manufacturer is IDT Technology Ltd. However, technical documentation (Block Diagram of the whole device) is from BlueRobin. Mikes: BlueRobin is only the name of the proprietary protocol using for transmission in the 915 MHz band. The devices were developed by BM innovations GmbH in order of Under Armour, technical documents were also issued by BM innovations GmbH in order of Under Armour. Page 2 of 2 5. For your information: I can see that the device passes from the emissions plots and bandwidth measurements but please remember that band edge measurements should always be included in a test report; either as spurious emissions data or a separate test. Mikes: Thank you for this information. We will hold in mind for future projects. 6. For your information: Please note that it still seems to be only your OATS listed on the IC website, whereas testing is still taking place inside the chamber. I know that IC did not give us a deadline to fix this problem but please don’t forget about it. Mikes: Thank you very much for your reminder. Process is still running, I have passed your information to my responsible colleagues. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Christa Jäger Global Market Access – Certification Group CSA Group Bayern GmbH Ohmstr. 1-4, 94342 Strasskirchen, Germany

FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 6 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 3 E Q U I P M E N T U N D E R T E S T 3.1 Photo documentation of the EUT External view:

FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 7 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- Internal view: FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 8 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013-

FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 1 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- EMI − T E S T R E P O R T - FCC Part 15.249, RSS210 - Test Report No. : T36955-00-00HS 13. November 2013 ______________________________________________________________________________________________ Date of issue Type / Model Name : A39M01 Product Description : Sport Performance Monitor Applicant : Under Armour Inc. Address : Tide Point, 1020 Hull Street, Baltimore, MD 21230 Manufacturer : IDT Technology Limited Address : Block C, 9/F., Kaiser Estate, Phase 1, 41 Man YueStreet, Hunghom, Kowloon, Hong Kong Licence holder : Under Armour Inc. Address : Tide Point, 1020 Hull Street, Baltimore, MD 21230 Test Result according to the standards listed in clause 1 test standards: POSITIVE The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 2 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- Contents 1 T E S T S T A N D A R D S 3 2 S U M M A R Y 4 2.1 GENERAL REMARKS: 4 2.2 Test result summery 5 2.3 FINAL ASSESSMENT: 5 3 E Q U I P M E N T U N D E R T E S T 6 3.1 Photo documentation of the EUT 6 3.2 Power supply system utilised 9 3.3 Short description of the equipment under test (EUT) 9 4 T E S T E N V I R O N M E N T 10 4.1 Address of the test laboratory 10 4.2 Environmental conditions 10 4.3 Statement of the measurement uncertainty 10 4.4 Measurement protocol for FCC and IC 11 4.5 Determination of worst case measurement conditions 11 5 T E S T C O N D I T I O N S A N D R E S U L T S 12 5.1 Conducted emissions 12 5.2 Radiated emission of the fundamental wave 12 5.3 Spurious emissions radiated 15 5.4 EBW and OBW 21 5.5 Correction for pulse operation (duty cycle) 24 5.6 Antenna application 24 6 U S E D T E S T E Q U I P M E N T A N D A C C E S S O R I E S 25 FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 3 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15, Subpart A - General (September, 2012) Part 15, Subpart A, Section 15.31 Measurement standards Part 15, Subpart A, Section 15.33 Frequency range of radiated measurements Part 15, Subpart A, Section 15.35 Measurement detector functions and bandwidths FCC Rules and Regulations Part 15, Subpart C - Intentional Radiators (September, 2012) Part 15, Subpart C, Section 15.203 Antenna requirement Part 15, Subpart C, Section 15.204 External radio frequency power amplifiers and antenna modifications Part 15, Subpart C, Section 15.205 Restricted bands of operation Part 15, Subpart C, Section 15.207 Conducted limits Part 15, Subpart C, Section 15.209 Radiated emission limits, general requirements Part 15, Subpart C, Section 15.249 Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz ANSI C63.4: 2003 Methods of Measurement of Radio-Noise Emissions from Low- Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. ANSI C95.1:2005 IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz CISPR 16-4-2: 2003 Uncertainty in EMC measurement CISPR 22: 2005 Information technology equipment EN 55022: 2006 FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 4 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 2 S U M M A R Y 2.1 GENERAL REMARKS: The EUT is a Bluetooth BLE – transceiver for low power data transmission in 40 channels of the operating band of 2.4 GHz to 2.4835 GHz. The EUT has an intergrated antenna. Special test software is used for setting the test modes. Variants of the EUT No variants. Antennas The following integrated antennas are used with the EUT: - PCB antenna. The antennas cannot be unattached by the user. Operation frequency and channel plan The operating frequency is 2400 MHz to 2483.5 MHz. Transmit operating modes The EUT use GFSK and provide following data rate: 1 Mbps (Mbps = Megabits per second) ChannelFrequencyChannelFrequencyChannelFrequency 12402152430292458 22404162432302460 32406172434312462 42408182436322464 52410192438332466 62412202440342468 72414212442352470 82416222444362472 92418232446372474 102420242448382476 112422252450392478 122424262452402480 132426272454 142428282456 FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 5 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 2.2 Test result summery Operating in the 2400 MHz – 2483.5 MHz band: FCC Rule Part RSS Rule Part Description Result 15.35(c) RSS-Gen, 4.5 Pulsed operation passed 15.203 RSS Gen, 7.1.2 Antenna requirement passed 15.204 RSS Gen, 7.1.1 External radio frequency power amplifiers passed 15.205(a) RSS-Gen, 7.2.2 Emissions in restricted bands passed 15.207(a) RSS Gen, 7.2.4 AC power line conducted emissions passed 15.215(c) -20 dBc EBW passed RSS-Gen, 4.6.1 99 % Bandwidth passed 15.249(a) RSS-210, A2.9(a) Field strength of fundamental passed 15.249(d) RSS Gen, 7.2.5 Out-of-band emission, radiated passed RSS-Gen, 7.2.6 Transmitter frequency stability not applicable The mentioned RSS Rule Parts in the above table are related to: RSS Gen, Issue 3, December 2010 RSS 210, Issue 8, December 2010 RSS 102, Issue 4, March 2010 2.3 FINAL ASSESSMENT: The equipment under test fulfills the EMI requirements cited in clause …

Text truncated - open the document above for the full version.

FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 12 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 5 T E S T C O N D I T I O N S A N D R E S U L T S 5.1 Conducted emissions For test instruments and accessories used see section 6 Part A 4. 5.1.1 Description of the test location Test location: NONE Remarks: Not applicable, the EUT is battery powered. 5.2 Radiated emission of the fundamental wave For test instruments and accessories used see section 6 Part CPR 3. 5.2.1 Description of the test location Test location: Anechoic chamber 2 Test distance: 3 m 5.2.2 Photo documentation of the test set-up FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 13 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 5.2.1 Applicable standard According to FCC Part 15C, Section 15.249(a): The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the effective limits. 5.2.2 Description of Measurement The radiated emission of the fundamental wave from the EUT is measured using a spectrum analyser and appropriate linear polarized antennas. The set up of the EUT and the measurement procedure is in accordance to ANSI C63.4. The EUT is measured in TX continuous mode unmodulated under normal conditions. Analyser settings: Peak measurement: RBW: 1 MHz VBW: 3 MHz Detector: Max peak AV measurement: RBW: 1 MHz VBW: 10 Hz Detector: Max peak 5.2.3 Test result Note: Due the extremely low level of the EUT no average level is measured. FrequencyLevel PKLimit PKMargin PKLevel AVLimit AVMargin AV (MHz)dB(μV/m)dB(μV/m)(dB)dB(μV/m)dB(μV/m)(dB) 240276.9114.0-37.1-94.0- 244077.5114.0-36.5-94.0- 248074.2114.0-39.8-94.0- FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 15 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 5.3 Spurious emissions radiated For test instruments and accessories used see section 6 Part SER 1, SER 2, SER 3. 5.3.1 Description of the test location Test location: OATS 1 Test location: Anechoic chamber 2 Test distance: 3 m 5.3.2 Photo documentation of the test set-up Test setup 30 MHz – 1000 MHz: FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 16 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- Test setup 1 GHz – 18 GHz: 5.3.3 Applicable standard According to FCC Part 15C, Section 15.249 (d): Emission radiated outside of the specified frequency bands, except harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated limit in FCC Part 15C, Section 15.209, whichever is the lesser attenuation. 5.3.4 Description of Measurement The radiated emissions from the EUT are measured in the frequency range of 9 kHz to 1000 MHz using a tuned receiver and appropriate broadband linearly polarized antennas. The setup of the EUT and the measurement procedure is in accordance to ANSI C63.4, Item 8.3. In the frequency range above 1 GHz a spectrum analyser is used with appropriate linear polarized antennas. If the emission level in peak mode complies with the average limit testing is stopped and peak values will be reported, otherwise, the emission is measured in average mode again and reported. The EUT is measured in TX continuous mode unmodulated under normal conditions. Instrument settings: 9 kHz – 150 kHz RBW: 200 Hz 150 kHz - 30 MHz RBW: 9 kHz 30 MHz – 1000 MHz: RBW: 120 kHz 1000 MHz – 25 GHz RBW: 1 MHz 5.3.1 Test result f < 30 MHz Note: In the frequency range 9 kHz to 30 MHz no emission could be detected. 5.3.2 Test result f < 1 GHz Note: In the frequency range 30 MHz to 1000 MHz no emission could be detected. FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-00HS, page 21 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 5.4 EBW and OBW For test instruments and accessories used see section 6 Part MB. 5.4.1 Description of the test location Test location: AREA4 5.4.2 Photo documentation of the test set-up 5.4.3 Applicable standard According to FCC Part 15, Section 15.215(c): Intentional radiators operating under the alternative provisions to the general emission limits, as contained in Section 15.217 through Section 15.257, must be designed to ensure that the 20 dB bandwidth of the emission is contained within the frequency band designated in the rule section under which the equipment is operated. 5.4.4 Description of Measurement The bandwidth is measured at an amplitude level reduced from the reference level by a specified ratio of -20 dB (99%). The x-dB-down (OBW) function of the analyser is used. The measurement is performed with normal modulation in TX continuous mode. Spectrum analyser settings: RBW: 30 kHz, VBW: 100 kHz, Span: 6 MHz, Trace mode: max. hold, Detector: max. peak;

FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-01HS, page 12 of 23 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 5 T E S T C O N D I T I O N S A N D R E S U L T S 5.1 Conducted emissions For test instruments and accessories used see section 6 Part A 4. 5.1.1 Description of the test location Test location: NONE Remarks: Not applicable, the EUT is battery powered. 5.2 Radiated emission of the fundamental wave For test instruments and accessories used see section 6 Part CPR 2. 5.2.1 Description of the test location Test location: OATS 1 Test distance: 3 m 5.2.2 Photo documentation of the test set-up 5.2.1 Applicable standard According to FCC Part 15C, Section 15.249(a): The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the limits given in the table. FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-01HS, page 14 of 23 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 5.3 Spurious emissions radiated For test instruments and accessories used see section 6 Part SER 1, SER 2, SER 3. 5.3.1 Description of the test location Test location: OATS 1 Test location: Anechoic chamber 2 Test distance: 3 m 5.3.2 Photo documentation of the test set-up Test setup 30 MHz – 1000 MHz: FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-01HS, page 15 of 23 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- Test setup 1 GHz – 18 GHz: 5.3.3 Applicable standard According to FCC Part 15C, Section 15.249 (d): Emission radiated outside of the specified frequency bands, except harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated limit in FCC Part 15C, Section 15.209, whichever is the lesser attenuation. 5.3.4 Description of Measurement The radiated emissions from the EUT are measured in the frequency range of 9 kHz to 1000 MHz using a tuned receiver and appropriate broadband linearly polarized antennas. The setup of the EUT and the measurement procedure is in accordance to ANSI C63.4, Item 8.3. In the frequency range above 1 GHz a spectrum analyser is used with appropriate linear polarized antennas. If the emission level in peak mode complies with the average limit testing is stopped and peak values will be reported, otherwise, the emission is measured in average mode again and reported. The EUT is measured in TX continuous mode unmodulated under normal conditions. Instrument settings: 9 kHz – 150 kHz RBW: 200 Hz 150 kHz - 30 MHz RBW: 9 kHz 30 MHz – 1000 MHz: RBW: 120 kHz 1000 MHz – 25 GHz RBW: 1 MHz 5.3.1 Test result f < 30 MHz Note: In the frequency range 9 kHz to 30 MHz no emission could be detected. 5.3.2 Test result f < 1 GHz Note: In the frequency range 30 MHz to 1000 MHz no emission could be detected. FCC ID: SHI-A39M01 IC ID: 10833A-A39M01 CSA Group Bayern GmbH File No. T36955-00-01HS, page 19 of 23 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2013- 5.4 OBW For test instruments and accessories used see section 6 Part MB. 5.4.1 Description of the test location Test location: AREA4 5.4.2 Photo documentation of the test set-up 5.4.3 Applicable standard According to FCC Part 15, Section 15.215(c): Intentional radiators operating under the alternative provisions to the general emission limits, as contained in Section 15.217 through Section 15.257, must be designed to ensure that the 20 dB bandwidth of the emission is contained within the frequency band designated in the rule section under which the equipment is operated. 5.4.4 Description of Measurement The bandwidth is measured at an amplitude level reduced from the reference level by a specified ratio of -20 dB (99%). The x-dB-down (OBW) function of the analyser is used. The measurement is performed with normal modulation in TX continuous mode. Spectrum analyser settings: RBW: 10 kHz, VBW: 30 kHz, Span: 1 MHz, Trace mode: max. hold, Detector: max. peak;