SI3JETSPEEDPROMEMEORY CARD

Jet-Speed TM User manual For windows and Linux users FCC NOTE :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. ™ Thank you for purchasing Jet-Speed™ product. We will put all our efforts to applying latest technology to improve functionalities of our products and minimize any inconvenience for users ƒ ƒ ƒ ƒ ƒ ƒ™ ƒ ƒ ƒ ƒ ƒ ƒ ƒ™ ƒ™ ƒ Jet-Speed TM User’s GuideCaution ƒ ƒ Caution ƒ™ • Contents ™ ™ ™and ™ ™ ™ Jet-Speed TM User’s Guide ™ ™ ™ ™ ™Driver ™ ™ ™ •™ • • • • •’ • ™ ™ Components ™ ™ Jet-Speed TM User’s Guide Components Components ™ ™ ™ ™ • •™ • •™ •™ Jet-Speed TM User’s Guide ™ Jet-Speed™ Outfit Comparison ™ Jet-Speed™ Lite Jet-Speed™ Standard Jet-Speed™ Pro Jet-Speed TM User’s Guide ™ Jet-Speed™ Jet-Speed™ Jet-Speed™ ™ ™ ™ Installation method may change depending on the type of computer and internal structure. Computer can be damaged with electrical shock thus it is strongly recommended that you unplug power cable prior to installation of hardware. If you have modem connected with computer, please unplug the modem line as well. Otherwise, there is a possibility of an electric shock. Also, be cautious that even weak static electricity generated by people may also damage parts of the product and sharp pointing structure of internal parts of computer. Turn off system power. If you have to move computer for installation, unplug power, keyboard and mouse cables. In order to load board, move computer to safe place and choose appropriate methods. Remove system case. Please refer to user manual to remove case of system safely Remove protective panel covered over the PCI slots Connect Jet-Speed™ Jet-Speed TM User’s Guide ™ ™ ™ ™ Jet-Speed TM User’s Guide ™ ™ ™ ™ ™ ™ ™ . ™ Jet-Speed TM User’s Guide ™ ™ When Windows starts, “New hardware found” message will be prompted ™ ™ ™ Jet-Speed TM User’s Guide “” “” “” “” Windows Driver Installation and Setup environment ™ “” Jet-Speed TM User’s Guide Windows Driver Installation and Setup environment “” “ ” “” Windows Driver Installation and Setup environment “”“” “”“” “” ™ ™ “”“” Jet-Speed TM User’s Guide Windows Driver Installation and Setup environment “ ” ™ “” ™ “™” Windows Driver Installation and Setup environment “”“” ™ Jet-Speed TM User’s Guide Windows Driver Installation and Setup environment “” “”“” “” “” “” Windows Driver Installation and Setup environment “ ” ™ ™ ™ ™ ™ Jet-Speed TM User’s Guide Windows Driver Installation and Setup environment “” Windows Driver Installation and Setup Environment “” “” ™ ™ ™ Jet-Speed TM User’s Guide Windows Driver Installation and Setup Environment “”“” “” “” Windows Driver Installation and Setup Environment “” “” “” “” “” Jet-Speed TM User’s Guide Windows Driver Installation and Setup Environment “”“ ”“”“” “” ’ ™ ™ Windows Driver Installation and Setup Environment “” “”™ Jet-Speed TM User’s Guide Windows Driver Installation and Setup Environment ™ “unallocated” “” ™ ™ ™ ™ ™ Windows Driver Installation and Setup Environment “” “”“” Jet-Speed TM User’s Guide Windows Driver Installation and Setup Environment “” “” “” “” Windows Driver Installation and Setup Environment “”“ ”“”“” “” Jet-Speed TM User’s Guide Windows Driver Installation and Setup Environment “” ™ “”™ Windows Driver Installation and Setup Environment ™ Jet-Speed TM User’s Guide Install Linux Driver and Environment configuration ™ ™ Install Linux Driver and Environment configuration Jet-Speed TM User’s Guide ™ ™ Install Linux Driver and Environment configuration – Install Linux Driver and Environment configuration ™ Jet-Speed TM User’s Guide Install Linux Driver and Environment configuration Install Linux Driver and Environment configuration Jet-Speed TM User’s Guide Install Linux Driver and Environment configuration Install Linux Driver and Environment configuration Jet-Speed TM User’s Guide User manual or Battery Pack ™ ™ ™ User manual or Battery Pack ™ “™” ™ ™ “”“” ™ Jet-Speed TM User’s Guide Q & A

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 14of 16 August 18, 2005 EUT Front Rear

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 16of 16 August 18, 2005 Appendix – Sample Label & Location

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 15of 16 August 18, 2005 Install with memory Install inside of pc

E E M M I I T T E E S S T T R R E E P P O O R R T T FCC EVALUATION REPORT FOR CERTIFICATION KOREA Standard Technology Test report No.: KST-FCC0539 Applicant’s Name : TAEJIN INFOTECH CO., LTD. Applicant’s Address : 6F, Woolim e-BIZ Center, 170-5, Guro-Dong, Guro-Ku, Seoul, Korea Manufacturer’s Name : TAEJIN INFOTECH CO., LTD . Manufacturer’s Address : 6F, Woolim e-BIZ Center, 170-5, Guro-Dong, Guro-Ku, Seoul, Korea EUT’s: FCC ID : SI3JetSpeedPro Product Name : Memory Card Model Number(s) : Jet-Speed Pro Product Options : N/A Category : FCC Part 15 subpart B Class B Computing Digital Device Supplementary Information The device bearing the brand name and FCC ID specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and was tested in accordance with measurement procedures specified in ANSI C63.4-2003 . I attest to the accuracy of data and all measurements reported herein were performed by or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test Date : August 16, 2005. Issued Date : August 18, 2005. Te s t e d b y : Approved by: Choi, Jae-RakLee, Weon-Woo E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 2of 16 August 18, 2005 Contents 1. Description of Device 2. Test Facility 3. MAP 4. Test system configuration 5. Description of E.U.T. 6. Summary of test results. 7. Test results. 8. Photographs. Appendix. Schematics Specifications. E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 3of 16 August 18, 2005 1. Description of Device 1) Kind of equipment: Memory Card 2) FCC ID: SI3JetSpeedPro 3) Model Name: Jet-Speed Pro 4) Serial No.: None 5) Type of Sample Tested: Pre-production 6) High Frequency Used: 40.000 MHz 7) Adapter -None 8) Power Rating: 1phase AC100-240V, 50/60Hz, 300W Output: DC 12V, 5V - PC POWER 9) Tested Power supply: 1phase AC120V, 60Hz 10) Date of Manufacture: August 2005 11) Manufacture: 12) Description of Operating: Scroll All “H” Character Resolution 1024*768 , Vertical Frequency: 75Hz 13) Dates of Test: August 16, 2005 14) Place of Tests: Korea Standard Technology EMC site 15) Test Report No: KST-FCC0539 E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 4of 16 August 18, 2005 2. Test Facility The open field test site and conducted measurement facility are used for these testing, where are located following address and drawing. This site was fully described in a report dated November 14, 2002, that was submitted to the FCC. Korea Standard Technology ( KOSTEC Co., Ltd) Head office & Test Lab : :180-254, Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Telephone Number: 82-31-222-4251 Facsimile Number: 82-31-222-4252 Test Lab MIC(Ministry of Information and Communication) Number: KR0041 FCC Filing Number: 525762 VCCI Membership Number: 2005 VCCI Registration Number: R-1657 / C-1763 KOLAS(Korea Laboratory Accreditation Scheme) Number: 232 E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 5of 16 August 18, 2005 3. MAP Korea Hwasung-shi (open area test site) KOSTEC Co., Ltd E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 6of 16 August 18, 2005 4. Test System Configuration Operation Environment Ambient Temperature ( C ) Humidity ( % ) Pressure ( hPa ) 10m Open Area site 28 44 1002 Shielded room: 25 42 1002 Test site These testing were performed following locations ; Shielded room : Conducted Emission, 10 m Open Area Site: Radiated Emission Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are test receiver, Cable loss, antenna factor calibration, Antenna directivity, antenna factor variation with height, antenna phase center variation, antenna frequency interpolation, measurement distance variation, site imperfection, mismatch, and system repeatability. Based on NIS 80,81, The measurement uncertainty level with a 95 % confidence level were applied. sample calculation Conducted emission The field strength is calculated by adding the LISN factor, cable loss from the measured reading. The sample calculation is as follows: FS = MR + LF + CL MR = Meter Reading LF = LISN Factor CL = Cable Loss If MR is 30dB, LISN Factor 1 dB, CL 1dB The result (MR) is 30 + 1 + 1 = 32 dBuV E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 7of 16 August 18, 2005 5. Description of E.U.T. Product Description Manufactured By: TAEJIN INFOTECH CO., LTD . Address: 6F, Woolim e-BIZ Center, 170-5, Guro-Dong, Guro-Ku, Seoul, Korea Model: Jet-Speed Pro Serial Number: None Configuration of EUT Description Manufacturer Model / Part # Serial Number Memory Card TAEJIN INFOTECH CO.,LTD. Jet Speed Pro None RAM SAMSUNG PC2700R-25331-DONone RAM SAMSUNG PC2700R-25331-DONone RAM SAM…

Text truncated - open the document above for the full version.

E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 8of 16 August 18, 2005 Operating conditions The operating mode/system were as follows in details: Operating: First time; Jet Speed Pro PCI card plug in to empty PCI Slot of mainboard. After Install the software automatically and then use to “H” pattern program for data transmission and continuously ‘H’ pattern displayed on the Monitor. Peripherals No Description Manufacturer Model / Part # Serial Number 1 Personal computer HANMI Micronics TH-901 None 2 MONITOR SAMSUNG Electronics PN17LT P225HVBT600318 3 Printer HEWLETT PACKARD C2644A SG55M1BORN 4 Keyboard SAMSUNG SEM-DT35 19063587 5 Mouse SAMSUNG SMOP5000WX None 6 Adaptor SAMSUNG YK-30083K None E.U.T Test Configuration (example) 6. Summary of test results Modification to the E.U.T. - None Result : - PASS E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 12of 16 August 18, 2005 8.PHOTOGRAPHS Conducted emission ( Front ) Conducted emission ( Rear ) E E M M I I T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0539 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 13of 16 August 18, 2005 Radiated Emission ( Front ) Radiated Emission ( Rear )