SLFEF-B202Bluetooth Speaker

BLUETOOTH SPEAKER INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE. In the Box • Bluetooth Wireless Speaker • Micro USB Charging Cord • Instruction Manual FEATURES • Enjoy music wirelessly • Built-in Lithium battery (Multi-function button (MFB)、LED Bluetooth Indicator、Volume Increase Button、Built-in Microphone、 Volume Decrease Button、Charging Indicator、Power On/Off Button、AUX-in Jack、USB Charging Port、 Speaker） INSTRUCTIONS FOR USE Turn ON the unit. You would now hear a Beep tone indicating that the speaker is pairing with the last device. The Blue LED flashes quickly. Turn on the Bluetooth function on your Bluetooth Device (Mobile Phone or Tablet). Please refer to manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have turned on Bluetooth on your device, select the device “BT SPEAKER” from the list of available Bluetooth devices. If required, enter the password ‘0000’ to confirm to finalize pairing. Once paired successfully, the front LED would flash slowly. The speaker will remember this device and will pair automatically when the device’s Bluetooth is activated and in range. You do not need to re-pair any previously connected devices. If need to pair with other device after pairing successfully, long press MFB button to enter pairing status. Please Note • Not all devices have the same operation. Please refer to your device’s user’s manual for further information. • If the speaker cannot pair up with new device for around 2.5 minutes, turn off the speaker and reboot to pair. Listening to Music Once the speaker is paired with your device you can stream music wirelessly through the speaker. Should you encounter any problems while streaming please refer your device’s user manual for further information. Control Function Function Operation Button Increase Volume Playing music A short press on the + button once will increase the volume Decrease Volume Playing music A short press on the - button once will decrease the volume Pause Playing music A short press on the MFB button will pause the music Play Pausing A short press on the MFB button will restart the music An indication tone will alert you when the volume is adjusted to the maximum or minimum level. Making a call with the headset in Bluetooth mode Basic operation Function Operation Button Answer A Call Incoming Call Press the MFB once to answer an incoming call. Reject a call Incoming Call Press the MFB button twice until a indication tone heard End a call Incoming Call After your phone conversation, Short press the MFB button Increase Volume During a call A short press on the + button once will increase the volume Decrease Volume During a call A short press on the - button once will decrease the volume Redial last number Standby mode or music status and connected to a device Press the MFB button twice Charging Instructions The speaker comes with a built in rechargeable battery.. Connect the Mini USB cable to a computer USB port and the other plug to the charging Mini USB port of the speaker. The Red LED illuminates while the speaker is charging. It takes around 4 hours for the unit to fully charge. When the battery is fully charged the red LED will glow off. Care and Maintenance Read the following recommendations before using the speaker. Following these you will be able to enjoy the product for many years. • Do not expose the speaker to liquid, moisture or humidity to avoid the product’s internal circuit being affected. • Don’t use abrasive cleaning solvents to clean the speaker. • Do not expose the speaker to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. • Don’t dispose of the speaker in a fire as it will result in an explosion. • Don’t expose the speaker to contact with sharp objects as this will cause scratches and damage. • Don’t let the speaker fall on the floor. The internal circuit might get damaged. • Don’t attempt to disassemble the speaker as it may get damaged if you are not professional. Specifications Bluetooth specification Bluetooth 3.0+EDR Operating distance 10 meters Working time Music: ~ 8hours Talk: ~ 10 hours Charging time About 4~5 hours Speaker power 2 x 3W Built-in Battery 1200mAh Dimensions ~175 X 57 X 72.5 mm Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Trade name: Shenzhen Wanfengda Electronics Co., Ltd. Name: Bluetooth Speaker Model Number: EF-B202 FCC ID: SLFEF-B202 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Wanfengda Electronics Co., Ltd. Date: 08.08.2013 Authority to Act as an Agent We declare that the following representative (agent) Name Mark Zhu Position Manager Company Name Shenzhen Certification Technology Service Co., Ltd. Address 2F, Building B, East Area of Nanchang Second Industrial Zone, Gushu 2 nd Road, Bao’an District, Shenzhen 518126, P.R. China Tel / Fax 0755-86375541/0755-26736857 Email [email protected] to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name Bluetooth Speaker Model Name EF-B202, DP-582, 72-SBI575, 150272, 286785, BCS6/2009 Brand Name WFDA . Yours sincerely, Signatory Name Huang huafeng Position Engineer Company Name Shenzhen Wanfengda Electronics Co., Ltd. Address 2F, Building 1, Hezhou Yuye Industrial Zone, Xixiang, Bao'an, Shenzhen. Tel +86-755-29617989-810 Fax +86-755-29617689 Email [email protected] In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance.

Shenzhen Wanfengda Electronics Co., Ltd. Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Company name: Shenzhen Wanfengda Electronics Co., Ltd. FCC ID : SLFEF-B202 FCC Part 15 Certification Gentlemen, Pursuant to 47 CFR 0.457(d)(1)(ii) and 0.459 we hereby requests permanent confidentiality of the following documents for the subject application: Exhibit Type Description ☒ Schematics All circuitry of devices and component values ☒ Block Diagrams Details of device showing the frequency of all oscillators ☒ Operational Description Description of the circuit functions Note: Exhibit types that are commonly held confidential are: (1) Schematics, (2) Block Diagrams, (3) Bill Of Materials, (4) Operational Descriptions. Any exhibit NOT granted confidentiality is viewable on the FCC website as soon as a grant is issued. These documents contain detailed system and equipment description and related information about the product which we considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, we consider that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours sincerely, Signatory Name Huang huafeng Position Engineer Company Name Shenzhen Wanfengda Electronics Co., Ltd. Address 2F, Building 1, Hezhou Yuye Industrial Zone, Xixiang, Bao'an, Shenzhen. Tel +86-755-29617989-810 Fax +86-755-29617689 Email [email protected]

40mm 20mm Trade name: Shenzhen Wanfengda Electronics Co., Ltd. Name: Bluetooth Speaker Model Number: EF-B202 FCC ID: SLFEF-B202 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Label Location

ANTENNA

Shenzhen Certification Technology Service Co., Ltd. 2F, Building B, East Area of Nanchang Second Industrial Zone, Gushu 2 nd Road, Bao'an District, Shenzhen 518126, P.R. China FCC ID: SLFEF-B202 Page 1 of 69 TEST REPORT FCC ID: SLFEF-B202 Applicant : Shenzhen Wanfengda Electronics Co., Ltd. Address :2F, Building 1, Hezhou Yuye Industrial Zone, Xixiang, Bao’an, Shenzhen. Equipment Under Test (EUT): Name : Bluetooth Speaker Model : EF-B202, DP-582, 72-SBI575, 150272, 286785, BCS6/2009 In Accordance with: FCC PART 15, SUBPART C : 2012 (Section 15.247) Report No : STI130725121 Date of Test : July 29-August 05, 2013 Date of Issue : August 06, 2013 Test Result: PASS In the configuration tested, the EUT complied with the standards specified above Authorized Signature ___________________________ (Mark Zhu) General Manager The manufacture should ensure that all the products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of Shenzhen Certification Technology Service Co., Ltd. Or test done by Shenzhen Certification Technology Service Co., Ltd. Approvals in connection with, distribution or use of the product described in this report must be approved by Shenzhen Certification Technology Service Co., Ltd. Approvals in writing. Report No.: STI130725121 FCC ID: SLFEF-B202 Page 2 of 69 Contents 1. General Information ...................................................................................................4 1.1. Description of Device (EUT) ...............................................................................4 1.2. Accessories of device (EUT) ...............................................................................4 1.3. Test Lab information ............................................................................................4 2. Summary of test ..........................................................................................................5 2.1. Summary of test result .........................................................................................5 2.2. Assistant equipment used for test.........................................................................5 2.3. Block Diagram .....................................................................................................5 2.4. Test mode .............................................................................................................6 2.5. Test Conditions.....................................................................................................6 2.6. Measurement Uncertainty (95% confidence levels, k=2) ....................................6 2.7. Test Equipment.....................................................................................................7 3. Maximum Peak Output power ..................................................................................8 3.1. Limit .....................................................................................................................8 3.2. Test Procedure ......................................................................................................8 3.3. Test Setup .............................................................................................................8 3.4. Test Result...........................................................................................................8 4. 20dB bandwidth ..........................................................................................................9 4.1. Limit .....................................................................................................................9 4.2. Test Procedure ......................................................................................................9 4.3. Test Result ............................................................................................................9 5. Carrier Frequency Separation.................................................................................13 5.1. Limit ...................................................................................................................13 5.2. Test Procedure ....................................................................................................13 5.3. Test Result ..........................................................................................................13 6. Number Of Hopping Channel..................................................................................15 6.1. Limit ...................................................................................................................15 6.2. Test Procedure ....................................................................................................15 6.3. Test Result ..........................................................................................................15 7. Dwell Time .................................................................................................................18 7.1. Test limit ............................................................................................................18 7.2. Test Procedure....................................................................................................18 7.3. Test Results ........................................................................................................18 8. Radiated emissions....................................................................................................29 8.1. Limit ...................................................................................................................29 8.2. Block Diagram of Test setup ..............................................................................30 8.3. Test Procedure ...............................................…

Text truncated - open the document above for the full version.

Conducted Emission Test Setup Radiated Emission Test Setup in Chamber