SLQ-RFNBKPDROCEKFISH WIRELESS NB KEYPAD

FCC ID: SLQ-RFNBKPD FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.Reorient the receiving antenna. 2.Increase the separation between the equipment and receiver. 3.Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. 4.Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction manual. Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. KPR08 User Manual Congratulations on your purchase of a Best Buy Wireless Calculator Keypad. This set offers the latest technology for interference-free operation with 27MHz wireless connection -- 4,096 IDs for keypad. The wireless keypad features on/off switch and auto power saving management for effective power conservation. The keypad is designed with a built-in cavity to store the USB receiver, eliminating the potential misplacement of the receiver and to provide ease travel with the keypad. This user’s guide describes how to connect the receiver to your computer, install default software drivers and set up the radio link. System Requirements To use the wireless keypad, your computer must meet the following hardware requirements and run one of the operating systems listed below: z PC with an Intel Pentium processor or equivalent z At least USB 1.1 or 2.0 interface Operating System z Windows 95/Windows 98/WinNT /Windows ME /Wins XP /Windows 2000 SETUP Installing the Batteries z Open the battery cover located on the bottom of the keypad. z Insert the supplied batteries, making sure that the positive (+) and negative (-) match polarity indicators inside the battery housing. z Turn on the keypad by sliding the Power switch on the bottom of keypad to the “ON” position. z BESTBUY Keypad back side view. WARNINGS: When replacing the battery, you may use alkaline or other heavy-duty NiMH batteries. Never combine an alkaline with a NiMH battery in a device. Avoid mixing new and used batteries in a device. Connecting the Receiver z Remove the receiver from the back of the keypad. z Plug the USB receiver into an available USB port on your computer. z The indicator LED will flash a time when you plug the receiver to you computer. z The screen of user computer will flash “ BestBuy ” letter. z You are now ready to set the receiver connect with your keypad. Setting the keypad connect with your Receiver After your computer detects the USB receiver, please follow below to set up your keypad connect work with you receiver. z Make sure your keypad turned On. z Press the connect key on the receiver. The LED is light. z Press the connect key on the bottom of keypad. z The LED on receiver will be turn off. (If you did not press the connect key on the bottom of keypad, the LED on receiver will be burn off after 8---10 seconds.) z Once the LED on the receiver turns off. The means your keypad can work with Receiver now. (You are now ready to use the wireless keypad set.) NOTE: Make sure that your computer is working and has detected the USB receiver. Functions z Hot key of “Mode” function are Switches between calculator and keypad modes z Hot key of “Send” function is send numbers on keypad screen to your computer of cursor direct. z z Keypad front view. Contents z Wireless Keypad z Wireless USB Receiver z 1 x AAA battery for keypad z 1PC extension USB cable. Specification Specification wireless keypad Keys 19 Standard Keys Key Stoke life time 10,000,000 Cycles Security Code 4096 different security code RF Transmission mode 1 channel FSK RF Transmission 27.045MHz channel bandwidth: 25KHZ Tx Emission Level 60dBuV/m≤E3m≤80dBuV/m at 3m Batteries 1 x AAA Size Power consumption Keyboard ≥10mA(Active)≤ 100uA(Suspend) Battery life 45 hours at Active mode with Alkaline Battery Operating Distance 1.5m Storage temperature -40°C ~55°C Working temperature 0°C ~40°C Operating humidity 40%~90% Keypad Dimension 137.7x97x31mm Receiver Dimension 52x16.5x13 mm Troubleshooting What do I do if the keypad does not work? • Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) connections in the battery housing. • Check that the receiver’s USB connector is firmly attached to the USB port on your computer. • Verify that the device drivers are installed. • Make sure you have established a communication link. When I use the calculator/keypad, other wireless devices work more slowly or fail temporarily – what should I do? • The calculator/keypad m…

Text truncated - open the document above for the full version.

11 22 33 44 D D C C B B A A D a t e : F i l e n a m e : E:\G-TECH 2006\KPR08\RF-NKPD-blk.sch D r a w n T I T L E : RF-NKPD block diagram A p p r o v e d C o n f i r m e d b y : b y : b y : V e r s i o n 1 . 0 文件 编号 G T - R 0 1 0 1 - A Key Input Data output VCC Data out Oscillator1 Power Amplification ANT Power control Key output Key Matrix Reset Power control MCU VCC DC/DC Convertor BATTERY Channel Control Reset GND ID ID KEY DRIVER IC LCD

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 1 of 14 - PHOTOS OF EUT-TX Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 3 of 14 - PHOTOS OF EUT-TX CASE Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 4 of 14 - PHOTOS OF EUT-TX KEY PAD Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 5 of 14 - PHOTOS OF EUT-TX LCD Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 7 of 14 - PHOTOS OF EUT-RX1 Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 9 of 14 - PHOTOS OF EUT-RX1 CASE Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 11 of 14 - PHOTOS OF EUT-RX2 Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 13 of 14 - PHOTOS OF EUT-RX2 CASE

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Sample of FCC ID Label The device is large enough for it to be placed warning statement on the device as follow: FCC ID: SLQ-RFNBKPD This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 2 of 14 - PHOTOS OF EUT-TX TOP IN Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 6 of 14 - PHOTOS OF EUT-TX PCB Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 8 of 14 - PHOTOS OF EUT-RX1 TOP IN Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 10 of 14 - PHOTOS OF EUT-RX1 PCB Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 12 of 14 - PHOTOS OF EUT-RX2 TOP IN Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 14 of 14 - PHOTOS OF EUT-RX2 PCB

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel:886-3-498-7684 Fax:886-3-498-8194 Date: Aug. 10, 2006 FCC ID: SLQ-RFNBKPD Operational Description of the equipment Installing the batteries and connecting the receiver, then, setting the keypad connect with your receiver. PRODUCT RocketFish Wireless NB Keypad MODEL NO. RF-NBKPD POWER REQUIREMENTS +1.5V DC FREQUENCY BAND 26.995~27.195MHz CARRIER FREQUENCY 27.045 MHz NUMBER OF CHANNEL 1 RATED RF OUTPUT POWER 0.02mW MODULATION TYPE FSK MODE OF OPERATION Simplex ANTENNA TYPE Integral antenna ANTENNA GAIN ＜0.025 CHANNEL BANDWIDTH 25KHz

1 1 2 2 3 3 4 4 5 5 6 6 DD CC BB AA Date:Filename: Drawn TITLE: RF-NBKPD_SCH Approved Confirmed by: by: by: Version V11 1 J3 BAT+ 1 J4 BAT- L5 0406-220uH C6 22uF C9 22uF D7 1N5819 VCC BAT+ Vout 2 Vin 3 G N D 1 U5TP331A R1 22K VCC C20 22pF C21 22pF OSC2 OSC1 XTAL1 XTAL2 1 2 3 Q1 9014 R4 22K R5 22K C2 1uF A0 1 A1 2 A2 3 VSS 4 SDA 5 SCL 6 WP 7 VCC 8 U4 S524A40X21-SCB0 VCC C1 0.1uF C8 0.1uF R15 10K C25 100pF 1 2 3 Q5 2SC2223A(F13) C4 0.1uF C5 0.1uF R2 100K R26 220R C27 1000pF 1 2 3 Q6 9014 C26 82pF C29 15pF VCC X1 27.045M C19 100pF R29 47R TXP TXD R27 22K L6 0.56uH C32 120pF C33 120pF C30 R18 47K VCC 1 2 3 4 SW11 SW-RST R6 1M C3 0.1uF VCC R0 SCL SDA /RST SCL SDA 2 1 3 SW1 MSH-12N02 C10 10uF C7 0.1uF SEG7 1 SEG6 2 SEG5 3 SEG4 4 SEG3 5 SEG2 6 SEG1 7 SEG0 8 CS 9 RD 10 WR 11 DATA 12 VSS 13 OSCO 14 OSCI 15 VLCC 16 VDD 17 IRQ 18 BZ 19 BZ 20 COM0 21 COM1 22 COM2 23 COM3 24 SEG31 25 SEG30 26 SEG29 27 SEG28 28 SEG27 29 SEG26 30 SEG25 31 SEG24 32 SEG23 33 SEG22 34 SEG21 35 SEG20 36 SEG19 37 SEG18 38 SEG17 39 SEG16 40 SEG15 41 SEG14 42 SEG13 43 SEG12 44 SEG11 45 SEG10 46 SEG9 47 SEG8 48 U2 SL3204 LCD_WR SDA C11 0.1uF VCC 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 31 31 32 32 33 33 34 34 35 35 36 36 J2 LCD36 LCD_CS R16 1K /RST OSC1 OSC2 SCL SDA TXP LCD_CS VCC GND LCD_WR XTAL1 XTAL2 /RST SDA TXP TXD R1 C6 C5 C4 C3 C2 C1 R0 R3 R2 WR C8 C7 SCL WR SDA CS R17 22K R19 22K C31 120pF L7 10uH ANT1 T1 T2 T3 VSS 1 TCC 2 VDD 3 /INT 4 P50 5 P51 6 P52 7 P53 8 P60 9 P61 10 P62 11 P63 12 P64 13 VSS 14 P65 15 P66 16 P67 17 P70 18 P71 19 P72 20 P73 21 P74 22 P75 23 P76 24 P77 25 OSCO 26 OSCI 27 /ERSET 28 U1 EM78P447SAS C1 C2 C3 C4 C5 C6 C7 C8 R0 R1 R2 R3 GND R7 10K LCD_CS 1 2 3 Q2 9014 1 2 3 Q3 9014 R8 240K R11 1M R12 47K R9 180K R10 6.8M VCC BAT+ LowBAT LowBAT R4 R4 R1 R2 R3 R0 C1 C2 C3 C4 C5 C6 1 2 SW2 Mode 1 2 SW3 Send C8 R3R2 X3 6.0M R3 C12 1000pF T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 C17C18 T18 T22 C8 R4 1 2 3 4 5 6 7 8 9 10 11 12 P1 SIP12 ANT2 C13 ANT3 C14 120pF PDF created with FinePrint pdfFactory trial version http://www.fineprint.com

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:2 of 21 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD Table of Contents 1. DOCUMENT POLICY AND TEST STATEMENT ................................................ 3 1.1 DOCUMENT POLICY ........................................................................................ 3 1.2 TEST STATEMENT ............................................................................................ 3 1.3 EUT MODIFICATION ......................................................................................... 3 2. DESCRIPTION OF EUT AND TEST MODE....................................................... 4 2.1 GENERAL DESCRIPTION OF EUT................................................................... 4 2.2 DESCRIPTION OF EUT INTERNAL DEVICE.................................................... 4 2.3 DESCRIPTION OF TEST MODE ....................................................................... 4 2.4 DESCRIPTION OF SUPPORT UNIT ................................................................. 5 3. DESCRIPTION OF APPLIED STANDARDS ...................................................... 5 4. CONDUCTED EMISSION TEST ........................................................................ 6 4.1 CONDUCTED EMISSION LIMIT........................................................................ 6 4.2 TEST EQUIPMENT............................................................................................ 6 4.3 TEST SETUP..................................................................................................... 7 4.4 TEST PROCEDURE .......................................................................................... 7 4.5 EUT OPERATING CONDITION ......................................................................... 7 4.6 TEST RESULT ................................................................................................... 8 5. RADIATED EMISSION TEST ............................................................................. 9 5.1 RADIATED EMISSION LIMIT............................................................................. 9 5.2 TEST EQUIPMENT...........................................................................................10 5.3 TEST SET-UP ...................................................................................................11 5.4 TEST PROCEDURE .........................................................................................13 5.5 EUT OPERATING CONDITION ........................................................................13 5.6 RADIATED EMISSION TEST RESULT .............................................................14 6. PHOTOS OF TESTING .................................................................................... 17 7. TERMS OF ABBREVIATION............................................................................ 21 Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:3 of 21 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD 1. DOCUMENT POLICY AND TEST STATEMENT 1.1 DOCUMENT POLICY - The report shall not be reproduced except in full, without the written approval of SRT Lab, Inc. - The report must not be used by the applicant to claim that the product is endorsed by NVLAP, TÜV, NEMKO and SRT. - The NVLAP logo applies only to the applicable standards specified in this report. 1.2 TEST STATEMENT - The test results in the report apply only to the unit tested by SRT Lab. - There was no deviation from the requirements of test standards during the test. - AC power source, 120 Vac/60 Hz, was used during the test. 1.3 EUT MODIFICATION - No modification in SRT Lab. Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:4 of 21 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD 2. DESCRIPTION OF EUT AND TEST MODE 2.1 GENERAL DESCRIPTION OF EUT PRODUCT RocketFish Wireless NB Keypad MODEL NO. RF-NBKPD POWER REQUIREMENTS +1.5V DC FREQUENCY BAND 26.995~27.195MHz CARRIER FREQUENCY 27.045 MHz NUMBER OF CHANNEL 1 RATED RF OUTPUT POWER 0.02mW MODULATION TYPE FSK MODE OF OPERATION Simplex ANTENNA TYPE Integral antenna ANTENNA GAIN ＜0.025 CHANNEL BANDWIDTH 25KHz NOTE : The EUT contains transmitter and receiver parts. For more detailed features, please refer to the manufacturer’s specification or User’s Manual. 2.2 DESCRIPTION OF EUT INTERNAL DEVICE DEVICE BRAND / MAKERMODEL # FCC ID/DOC REMARK 2.3 DESCRIPTION OF TEST MODE N/A (It is only applicable to more than one test mode.) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:5 of 21 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD 2.4 DESCRIPTION OF SUPPORT UNIT The EUT was configured by the requirement of ANSI C63.4:2003 and CISRP22:2003. All interface ports were connected to the appropriate support units via specific cables. The support units and cables are listed below. NO DEVICE BRAND MODEL # FCC ID/DOCCABLE 1 PRINTER EPSON STYLUS C20SX N/A 1.5m unshielded power cord 1.5m shielded data cable 2 USB HD TeraSys F12-UF N/A 1.2m unshielded power cord 3 NOTEBOOK Compaq Presario B2000 N/A 1.8m unshielded power cord 4 MONITOR SANGSUNG 700IFT N/A 1.8m unshielded power cord 1.5m shielded data cable 5 MOUSE COMPAQ M-S34 DZL211029 1.5m unshielded data cord NOTE : For the actual test configuration, please refer to the photos of testing. 3. DESCRIPTION OF APPLIED STANDARDS The EUT is a kind of wireless product and to be connected with a PC system for normal use. According to the specifications provided by the applicant, it must comply with the requirements of the following standards: 47 CFR Part 15, Subpart C A…

Text truncated - open the document above for the full version.

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:10 of 21 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD 5.2 TEST EQUIPMENT The following test equipment was used during the radiated emission test: EQUIPMENT/ FACILITIES SPECIFICATIONSMANUFACTURER MODEL#/ SERIAL# DUE DATE OF CAL. & CAL. CENTER EMI TEST RECEIVER 9 KHz TO 1 GHz ROHDE & SCHWARZ ESCS30/ 830245/012 OCT. 2006 ETC LOOP ANTENNA 9 KHz TO 30 MHzR&S HFH2-Z2/1162 1/2 JAN, 2007 SRT BI-LOG ANTENNA 25 MHz TO 2 GHz EMCO 3143/ 9509-1141 SEP. 2006 SRT SPECTRUM ANALYZER 9 KHz TO 26.5 GHz HP 8593E/ 3710A03220 MAY 2007 ETC PRE-AMPLIFIER 1 GHz TO 26.5 GHz HP 8449B/ 3008A01019 NOV. 2006 ETC HORN ANTENNA 1 GHz TO 18 GHz EMCO 3115/ 9602-4681 DEC. 2006 ETC OATS 3 – 10 M MEASUREMENT SRT SRT-1 DEC. 2006 SRT COAXIAL CABLE 25M SUNCITY J400/ 25M AUG. 2006 SRT FILTER 2 LINE, 30A FIL.COIL FC-943/ 869 N/A FREQUENCY CONVERTER N/A APC AFC-2KBB/ F100030031 AUG. 2006 SRT NOTE: 1. The calibration interval of the above test equipment is one year and the calibrations are traceable to NML/ROC and NIST/USA. 2. The Open Area Test Site (SRT-1) is registered by FCC with No. 90957 and VCCI with No. R-1081. 3. The Open Area Test Site (SRT-2) is registered by FCC with No. 98458 and VCCI with No. R-1168.

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:16 of 20 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD 6. PHOTOS OF TESTING - Conducted test Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:17 of 20 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD - Radiated test (TX)9KHz-30MHz Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:18 of 20 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD - Radiated test (TX) 30MHz-1GHz Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. TEST REPORT Reference No.:A06071802 Report No.:FCCA06071802 Page:19 of 20 Date: Aug. 08, 2006 FCC ID: SLQ-RFNBKPD - Radiated test (RX)30M-1G