SLRHS2SBDWireless Body Composition Scale

V2.2 去掉“小人翻书” V2.3 修改FCC ID 2023.10.23 V2.3 2024.08.10

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307703 Page: 1 of 12 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2408003077HS Applicant: iHealth Labs, Inc. Address of Applicant: 880W Maude Ave, Sunnyvale, California 94085 United States Manufacturer: iHealth Labs, Inc. Address of Manufacturer: 880W Maude Ave, Sunnyvale, California 94085 United States Equipment Under Test (EUT): EUT Name: Wireless Body Composition Scale Model No.: HS2S, HS2S Pro   Please refer to section 3.2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: iHealth FCC ID: SLRHS2SBD Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2024-08-08 Date of Evaluation: 2024-08-12 to 2024-08-18 Date of Issue: 2024-08-19 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307703 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2024-08-19 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307703 Page: 3 of 12 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ............................................................................................................... 11 5.1 Maximum transmit power ................................................................................................................. 11 5.2 RF Exposure Calculation ................................................................................................................. 11 6 EUT Constructional Details (EUT Photos) ........................................................................................... 12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307703 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Powered by 6.0V DC (1.5V x 4 "AAA" Size Rechargeable Batteries). Cable(s): N/A Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.1 LE Modulation Type: GFSK Data Rate: 1Mbps Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: -0.5dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Declaration of EUT Family Grouping: Model No.: HS2S, HS2S Pro Only the model HS2S Pro was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used, internal wiring and functions were identical for all the above models, with only difference on model No. and packaging. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307703 Page: 5 of 12 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test…

Text truncated - open the document above for the full version.

专业的RF研发机构 深圳市德威玛通讯设备有限公司 深圳研发中心实验室 完成日期:2024年06月14日 项目信息 1 项目:CF613 2 频段: BT(2.4GHz~2.5GHz) 3 备注: 4 测试仪器设备 天线项目设计调试说明 工 作 频 段 BT:2400~2500MHz 测试 工程师 版本 DWM- V1.0 整机外观图天线备注说明 1.BT天线形式:IFA天线 2.BT天线匹配电路：有更改。 天线环境处理 按天线原有状态测试， 未增加其他辅料 BT天线匹配电路说明 ElementValueVender E1(0201) NC E2(0201) 0Ω E3(0201) NC E4(0201) 0Ω BT天线匹配电路有做变更 BT天线(板载)位置 BT天线无源（电路传输参数）测试状态截图 BT天线电路传输参数（SWR+Smith）截图 BT天线无源OTA测试状态截图 BT天线增益和效率 BT天线方向图（2400MHz） BT天线方向图（2450MHz） BT天线方向图（2500MHz） 專業的RF研發機構 公司地址：深圳市宝安23区创业二路友谊大厦1栋3楼（地铁洪浪北B 出口平安银行后面）

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307702 Page: 1 of 53 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2408003077HS Applicant: iHealth Labs, Inc. Address of Applicant: 880W Maude Ave, Sunnyvale, California 94085 United States Manufacturer: iHealth Labs, Inc. Address of Manufacturer: 880W Maude Ave, Sunnyvale, California 94085 United States Equipment Under Test (EUT): EUT Name: Wireless Body Composition Scale Model No.: HS2S, HS2S Pro   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: iHealth FCC ID: SLRHS2SBD Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2024-08-08 Date of Test: 2024-08-12 to 2024-08-18 Date of Issue: 2024-08-19 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307702 Page: 2 of 53 Revision Record Version Chapter Date Modifier Remark 01 2024-08-19 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307702 Page: 3 of 53 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Declaration of EUT Family Grouping: Model No.: HS2S, HS2S Pro Only the model HS2S Pro was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used, internal wiring and functions were identical for all the above models, with only difference on model No. and packaging. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307702 Page: 4 of 53 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 7 4.7 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 10 6.1 Antenna Requirement ...................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 Radio Spectrum Matter Test Results .................................................................................................... 11 7.1 Radiated Emissions which fall in the restricted bands ..................................................................... 11 7.1.1 E.U.T. Operation .......................................................................................................................... 11 7.1.2 Test Mode Description ................................................................................................................. 11 7.1.…

Text truncated - open the document above for the full version.