SLY-WK1X22802.11ac Dual Band Access Point

pa WK‐1 802.1 User G aked 1,WK‐1‐ 11ac Du Guide – V dged ‐B, WK‐ ual Band Version 1 evice 1‐O d Access 1.0 &softw s Point wareinnc. WK-1x User Manual 2 FCC Declaration of Conformity Pakedge Device & Software, 3847 Breakwater Avenue, Hayward, CA 94545, declares under sole responsibility that the WK‐1x complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. FCC Compliance Class B Digital Device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Wireless LAN and Your Health The WK‐1x, like other radio devices, emits radio frequency electromagnetic energy, but operates within the guidelines found in radio frequency safety standards and recommendations. FCC Certification The WK‐1x contains a radio transmitter. Accordingly, it has been certified as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with FCC ID and the FCC logo. Restrictions on Use of Wireless Devices In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization. For example, these situations may include:  Using wireless equipment on board an airplane.  Using wireless equipment in any environment where the risk of interference to other devices or services is perceived or identified as harmful.  The availability of some specific channels and / or operational frequency bands are country dependent and are firmware programmed at factory to match the intended destination. The firmware setting is not accessible by the end user. If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or environment (such as airports), you are encouraged to ask for authorization to use the device prior to turning on the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this product, or the substitution or attachment of connecting cables and equipment other than specified by the manufacturer. Correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines. WK-1x User Manual 3 Caution: Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter. End‐users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER. CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: THIS DEVICE MUST BE INSTALLED AND USED IN STRICT ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS AS DESCRIBED IN THE USER DOCUMENTATION THAT COMES WITH THE PRODUCT. WARNING: POSTPONE INSTALLATION UNTIL THERE IS NO RISK OF THUNDERSTORM OR LIGHTNING ACTIVITY IN THE AREA. CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE GRANTEE OF THIS DEVICE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. SAFETY PRECAUTIONS: When using this device, always follow basic safety precautions, to reduce the risk of fire, electric shock, and injury to persons, including the following:  Read all of the instructions (listed here and/or in the user manual) before you operate this equipment.  Comply with all warning and caution statements in the instructions.  Retain the instructions for future reference.  Observe all warning and caution symbols that are affixed to this equipment.  Comply with all instructions that accompany this equipment.  Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating condition.  Installation of this product must be in accordance with national wiring codes and conform to local regulations.  Avoid using this product during an electrical storm. There may be a risk of electric shock from lightning. For added protection for this product durin…

Text truncated - open the document above for the full version.

Report No.: 1520470R-RFUSP01V00 Page : 1 of 19 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 2 of 19 (3) EUT Photo (4) EUT Photo

RF_160, Issue 03 Pakedge Device and Software Inc. Declaration of Authorization We Name: Pakedge Device and Software Inc. Address: 3847 Breakwater Avenue, Hayward, CA 94545 City: Hayward Country: United States Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: 802.11ac Dual Band Access Point FCC ID: SLY-WK1X22 Trademark: Pakedge on our behalf. Date: 2015/04/09 City: Hayward Name: Victor Pak (2) Function: CEO Signature: --------------------------------------------- Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Pakedge Device and Software Inc. Date (09/Apr./2015) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: SLY-WK1X22 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Pakedge Device and Software Inc.) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Common exhibits for which confidentiality is requested are: Schematics: (WK-1) Schem Block Diagrams: (WK-1) BlkDia Theory of Operation: (WK-1) OPDes Software Security Description: (WK-1) Software Security Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Victor Pak (signed by FCC listed Grantee contact) Telephone Number: 650-385-8710 Email: [email protected]

Declaration Letter Date: Apr. 09, 2015 We, the undersigned Pakedge Device and Software Inc. hereby declare. The device FCC ID: SLY-WK1X22 complete below list: The different of each model is shown as below: Signature ----------------------------------------- Victor Pak/ CEO Pakedge Device and Software Inc. Tel: 650-385-8710 Fax: 650-685-5520 Email: [email protected] Model Number Appearance color Spec WK-1 white Indoor WK-1-B Black Indoor

Report No.: 1520470R-RFUSP01V00 Page : 1 of 19 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 2 of 19 (3) EUT Photo (4) EUT Photo

Pakedge Device and Software Inc. FCC ID.: SLY-WK1X22 3847 Breakwater Avenue, Hayward, CA 94545 Tel : 650-385-8710 The FCC ID Label will be placed on the equipment as shown in the photograph below. M/N: WK-1 M/N: WK-1-B

Pakedge Device and Software Inc. FCC ID.: SLY-WK1X22 3847 Breakwater Avenue, Hayward, CA 94545 Tel : 650-385-8710 FCC ID Label

Report No.: 1520470R-RFUSP01V00 Page : 3 of 19 (5) EUT Photo (6) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 4 of 19 (7) EUT Photo (8) EUT Photo 2.4GHz Antenna 2.4GHz Antenna 5GHz Antenna 5GHz Antenna Report No.: 1520470R-RFUSP01V00 Page : 5 of 19 (9) EUT Photo (10) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 6 of 19 (11) EUT Photo (12) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 7 of 19 (13) EUT Photo (14) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 8 of 19 (15) EUT Photo (16) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 9 of 19 (17) EUT Photo (18) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 10 of 19 (19) EUT Photo (20) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 11 of 19 (21) EUT Photo (22) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 12 of 19 (23) EUT Photo (24) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 13 of 19 (25) EUT Photo (26) EUT Photo 2.4G WLAN Card 5G WLAN Card Report No.: 1520470R-RFUSP01V00 Page : 14 of 19 (27) EUT Photo (28) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 15 of 19 (29) EUT Photo-2.4GHz Antenna (30) EUT Photo-2.4GHz Antenna Report No.: 1520470R-RFUSP01V00 Page : 16 of 19 (31) EUT Photo-5GHz Antenna (32) EUT Photo-5GHz Antenna Report No.: 1520470R-RFUSP01V00 Page : 17 of 19 (33) EUT Photo (34) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 18 of 19 (35) EUT Photo (36) EUT Photo Report No.: 1520470R-RFUSP01V00 Page : 19 of 19 (37) EUT Photo (38) EUT Photo

Report No. 1520470R-RFUSP01V00 Page: 1 of 3 RF Exposure Evaluation declaration Product Name 802.11ac Dual Band Access Point Model No. WK-1, WK-1-B FCC ID SLY-WK1X22 Applicant Pakedge Device and Software Inc. Address 3847 Breakwater Avenue, Hayward, CA 94545 Date of Receipt Feb. 25, 2015 Date of Declaration Apr. 02, 2015 Report No. 1520470R-RFUSP01V00 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No. 1520470R-RFUSP01V00 Page: 2 of 3 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 1520470R-RFUSP01V00 Page: 3 of 3 1.3. Test Result of RF Exposure Evaluation Product : 802.11ac Dual Band Access Point Test Item : RF Exposure Evaluation Test Site : No.3 OATS Operation Frequency 2412-2462MHz 5745-5825MHz, 5755-5795MHz 5180-5240MHz, 5190-5230MHz 5210MHz, 5775MHz Maximum Conducted output power 28.48 dBm Antenna gain 7.0 dBi Output Power Into Antenna & RF Exposure Evaluation Distance: Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 704.6931 0.702636 Power density is lower than the limit (1 mW/cm2).

Report No.: 1520470R-RFUSP05V00 Page: 1 of 126 FCC Test Report Product Name 802.11ac Dual Band Access Point Model No WK-1,WK-1-B FCC ID SLY-WK1X22 Applicant Pakedge Device and Software Inc. Address 3847 Breakwater Avenue, Hayward, CA 94545 Date of Receipt Feb. 25, 2015 Issued Date Apr. 02, 2015 Report No. 1520470R-RFUSP05V00 Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No.: 1520470R-RFUSP05V00 Page: 2 of 126 Test Report Issued Date: Apr. 02, 2015 Report No.: 1520470R-RFUSP05V00 Product Name 802.11ac Dual Band Access Point Applicant Pakedge Device and Software Inc. Address 3847 Breakwater Avenue, Hayward, CA 94545 Manufacturer Pakedge Device and Software Inc. Factory Lite-On Network Communication (Dongguan) Limited Model No. WK-1,WK-1-B FCC ID. SLY-WK1X22 EUT Rated Voltage AC 100-240V, 50-60Hz EUT Test Voltage AC 120V/60Hz Trade Name Pakedge Applicable Standard FCC CFR Title 47 Part 15 Subpart E: 2014 ANSI C63.4: 2014, ANSI C63.10: 2013 789033 D02 General UNII Test Procedures New Rules v01 Test Result Complied Documented By: (Senior Adm. Specialist / Leven Huang ) Tested By : ( Engineer / Eason Chen ) Approved By : ( Director / Vincent Lin ) Report No.: 1520470R-RFUSP05V00 Page: 3 of 126 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ..................................................................................................... 5 1.1. EUT Description ............................................................................................................................ 5 1.2. Operational Description ................................................................................................................ 7 1.3. Tested System Datails.................................................................................................................... 8 1.4. Configuration of tested System ..................................................................................................... 8 1.5. EUT Exercise Software ................................................................................................................. 8 1.6. Test Facility ................................................................................................................................... 9 2. Conducted Emission .................................................................................................................. 10 2.1. Test Equipment ............................................................................................................................ 10 2.2. Test Setup .................................................................................................................................... 10 2.3. Limits .......................................................................................................................................... 11 2.4. Test Procedure ............................................................................................................................. 11 2.5. Uncertainty .................................................................................................................................. 11 2.6. Test Result of Conducted Emission ............................................................................................. 12 3. Maximun conducted output power .......................................................................................... 16 3.1. Test Equipment ............................................................................................................................ 16 3.2. Test Setup .................................................................................................................................... 16 3.3. Limits .......................................................................................................................................... 17 3.4. Test Procedure ............................................................................................................................. 18 3.5. Uncertainty .................................................................................................................................. 18 3.6. Test Result of Maximum conducted output power ...................................................................... 19 4. Peak Power Spectral Density .................................................................................................... 27 4.1. Test Equipment ............................................................................................................................ 27 4.2. Test Setup .................................................................................................................................... 27 4.3. Limits .......................................................................................................................................... 27 4.4. Test Procedure ............................................................................................................................. 28 4.5. Uncertainty .................................................................................................................................. 28 4.6. Test Result of Peak Power Spectral Density ............................................................................... 29 5. Radiated Emission ..................................................................................................................... 51 5.1. Test Equipment ............................................................................................................................ 5…

Text truncated - open the document above for the full version.

Report No.: 1520470R-RFUSP01V00 Page : 1 of 3 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 1520470R-RFUSP01V00 Page : 2 of 3 Front View of Radiated Test Back View of Radiated Test Report No.: 1520470R-RFUSP01V00 Page : 3 of 3 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)