SNM-S789-1Tri-Band GSM GPRS Mobile Phone

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 1 LABEL LOCATION FCC ID: SNM-S789-1

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6

FCC ID: SNM-S789-1 Report No.: RF941201L15 Operational Description This device is the Tri-Band GSM GPRS Mobile Phone and operated frequency in the 1900MHz (PCS band). When GMSK technique will be applied under the transmission data and voice. The transmitter of the EUT is powered by charged battery or AC adapter. The antenna is fixed ixternal antenna. There is no antenna connector. The other instruction, please have a look at the users manual.

B - 1 APPENDIX B: ADT SAR MEASUREMENT SYSTEM C - 1 APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION

D - 1 APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION D1: SAM PHANTOM D - 3 D2: DOSIMETRIC E-FIELD PROBE D - 12 D3: DAE D - 16 D4: SYSTEM VALIDATION DIPOLE

FCC ID: SNM-S789-1 Report No.: SA941201L151Report Format Version 2.0.2 SAR TEST REPORT REPORT NO.: SA941201L15 MODEL NO.: S789+ RECEIVED: Dec. 07, 2005 TESTED: Dec. 12, 2005 ISSUED: Jan. 09, 2006 APPLICANT: NINGBO BIRD CO., LTD ADDRESS: No. 999, Dacheng East Road, Fenghua City, Zhejiang, China ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 45 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA NO. 2177-01 FCC ID: SNM-S789-1 Report No.: SA941201L152Report Format Version 2.0.2 TABLE OF CONTENTS 1.CERTIFICATION........................................................................................................................ 3 2.GENERAL INFORMATION........................................................................................................ 4 2.1GENERAL DESCRIPTION OF EUT ................................................................................... 4 2.2GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................... 6 2.3GENERAL INOFRMATION OF THE SAR SYSTEM........................................................... 7 2.4GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION........................ 10 3.DESCRIPTION OF SUPPORT UNITS .................................................................................... 14 4.DESCRIPTION OF TEST POSITION...................................................................................... 15 4.1.DESCRIPTION OF ANTENNA LOCATION...................................................................... 15 4.2.DESCRIPTION OF TEST POSITION ............................................................................... 16 4.2.1.TOUCH/CHEEK TEST POSITION.................................................................................... 17 4.2.2.TILT TEST POSITION .......................................................................................................18 4.2.3.BODY-WORN CONFIGURATION..................................................................................... 18 4.3.DESCRIPTION OF ASSESSMENT POSITION................................................................ 19 4.4.DESCRIPTION OF TEST MODE...................................................................................... 21 4.5.SUMMARY OF TEST RESULTS ...................................................................................... 22 5.TEST RESULTS ...................................................................................................................... 23 5.1TEST PROCEDURES....................................................................................................... 23 5.2MEASURED SAR RESULTS ............................................................................................ 25 5.3SAR LIMITS ...................................................................................................................... 28 5.4RECIPES FOR TISSUE SIMULATING LIQUIDS.............................................................. 29 5.5TEST EQUIPMENT FOR TISSUE PROPERTY ............................................................... 32 6.SYSTEM VALIDATION ............................................................................................................33 6.1TEST EQUIPMENT........................................................................................................... 33 6.2TEST PROCEDURE ......................................................................................................... 34 6.3VALIDATION RESULTS.................................................................................................... 36 6.4SYSTEM VALIDATION UNCERTAINTIES (FREQUENCY BAND < 3GHz) ..................... 37 7.MEASUREMENT SAR PROCEDURE UNCERTAINTIES ...................................................... 38 7.1.PROBE CALIBRATION UNCERTAINTY .......................................................................... 38 7.2.ISOTROPY UNCERTAINTY ............................................................................................. 39 7.3.BOUNDARY EFFECT UNCERTAINTY ............................................................................ 39 7.4.PROBE LINEARITY UNCERTAINTY................................................................................ 40 7.5.READOUT ELECTRONICS UNCERTAINTY ................................................................... 40 7.6.RESPONSE TIME UNCERTAINTY .................................................................................. 40 7.7.INTEGRATION TIME UNCERTAINTY ............................................................................. 41 7.8.PROBE POSITIONER MECHANICAL TOLERANCE....................................................... 42 7.9.PROBE POSITIONING ..................................................................................................... 42 7.10.PHANTOM UNCERTAINTY.............................................................................................. 43 7.11.DASY4 UNCERTAINTY BUDGET (FREQUENCY BAND < 3GHz) ................................. 44 8.INFORMATION ON THE TESTING LABORATORIES............................................................ 45 APPENDIX A: TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION FCC ID: SNM-S789-1 Report No.: SA941201L153Report Format Version 2.0.2 1. CERTIFICATION PRODUCT: Tri-Band GSM GPRS Mobile Phone MODEL: S789+ BRAND: BIRD APPLICANT: NINGBO BIRD C…

Text truncated - open the document above for the full version.

A - 1 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA A1: TEST CONFIGURATION Right Head Cheek Position A - 2 Right Head Tilt Position A - 3 Left Head Cheek Position A - 4 Left Head Tilt Position A - 5 Body Worn Position The bottom of the EUT to the flat phantom distance 15 mm A - 6 Body Worn Position The front of the EUT to the flat phantom distance 15 mm A - 7 EUT Photo Reference Point (HEAD) Reference Point (BODY) A - 8 A - 9 Liquid Level Photo Tissue HSL1900MHz D=155mm Tissue MSL1900MHz D=151mm A - 10 Date/Time: 2005/12/12 11:04:55 Test Laboratory: Advance Data Technology Right Head-Cheek-PCS1900-Ch512-Mode 1 DUT: Tri-Band GSM GPRS Mobile Phone ; Type: S789+ ; Test Frequency: 1850.2 MHz Communication System: PCS 1900 ; Frequency: 1850.2 MHz ; Duty Cycle: 1:8.3 Phantom: SAM 12 Medium parameters used: f = 1850.2 MHz; σ = 1.37 mho/m; ε r = 39.1; ρ = 1000 kg/m 3 ; Liquid level: 155 mm Phantom section: Right Section ; DUT test position : Cheek ; Modulation type: GMSK Antenna type : Internal Antenna ; Air temp. : 21.9 degrees ; Liquid temp. : 20.7 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790; ConvF(5.26, 5.26, 5.26) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2005/3/23 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23; Postprocessing SW: SEMCAD, V1.8 Build 160 Touch position - Low Channel 512/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.777 mW/g Touch position - Low Channel 512/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.0 V/m Peak SAR (extrapolated) = 1.41 W/kg SAR(1 g) = 0.714 mW/g; SAR(10 g) = 0.368 mW/g Maximum value of SAR (measured) = 0.795 mW/g Touch position - Low Channel 512/Zoom Scan (7x7x7) (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.0 V/m Peak SAR (extrapolated) = 1.10 W/kg SAR(1 g) = 0.596 mW/g; SAR(10 g) = 0.342 mW/g Maximum value of SAR (measured) = 0.654 mW/g A - 11 Date/Time: 2005/12/12 11:35:13 Test Laboratory: Advance Data Technology Right Head-Cheek-PCS1900-Ch661-Mode 1 DUT: Tri-Band GSM GPRS Mobile Phone ; Type: S789+ ; Test Frequency: 1880 MHz Communication System: PCS 1900 ; Frequency: 1880 MHz ; Duty Cycle: 1:8.3 Phantom: SAM 12 Medium parameters used: f = 1880 MHz; σ = 1.4 mho/m; ε r = 39; ρ = 1000 kg/m 3 ; Liquid level: 155 mm Phantom section: Right Section ; DUT test position : Cheek ; Modulation type: GMSK Antenna type : Internal Antenna ; Air temp. : 21.9 degrees ; Liquid temp. : 20.7 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790; ConvF(5.26, 5.26, 5.26) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2005/3/23 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23; Postprocessing SW: SEMCAD, V1.8 Build 160 Touch position - Mid Channel 661/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.888 mW/g Touch position - Mid Channel 661/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.6 V/m Peak SAR (extrapolated) = 1.67 W/kg SAR(1 g) = 0.828 mW/g; SAR(10 g) = 0.418 mW/g Maximum value of SAR (measured) = 0.917 mW/g Touch position - Mid Channel 661/Zoom Scan (7x7x7) (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.6 V/m Peak SAR (extrapolated) = 1.22 W/kg SAR(1 g) = 0.641 mW/g; SAR(10 g) = 0.368 mW/g Maximum value of SAR (measured) = 0.725 mW/g A - 12 Date/Time: 2005/12/12 12:23:21 Test Laboratory: Advance Data Technology Right Head-Cheek-PCS1900-Ch810-Mode 1 DUT: Tri-Band GSM GPRS Mobile Phone ; Type: S789+ ; Test Frequency: 1909.8 MHz Communication System: PCS 1900 ; Frequency: 1909.8 MHz ; Duty Cycle: 1:8.3 Phantom: SAM 12 Medium parameters used: f = 1909.8 MHz; σ = 1.43 mho/m; ε r = 38.8; ρ = 1000 kg/m 3 ; Liquid level: 155 mm Phantom section: Right Section ; DUT test position : Cheek ; Modulation type: GMSK Antenna type : Internal Antenna ; Air temp. : 21.9 degrees ; Liquid temp. : 20.7 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790; ConvF(5.26, 5.26, 5.26) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2005/3/23 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23; Postprocessing SW: SEMCAD, V1.8 Build 160 Touch position - High Channel 810/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.13 mW/g Touch position - High Channel 810/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.3 V/m Peak SAR (extrapolated) = 2.24 W/kg SAR(1 g) = 1.12 mW/g; SAR(10 g) = 0.561 mW/g Maximum value of SAR (measured) = 1.22 mW/g Touch position - High Channel 810/Zoom Scan (7x7x7) (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.3 V/m Peak SAR (extrapolated) = 1.72 W/kg SAR(1 g) = 0.840 mW/g; SAR(10 g) = 0.457 mW/g Maximum value of SAR (measured) = 1.01 mW/g A - 13 Date/Time: 2005/12/12 12:53:58 Test Laboratory: Advance Data Technology Right Head-Tilt-PCS1900-Ch512-Mode 2 DUT: Tri-Band GSM GPRS Mobile Phone ; Type: S789+ ; Test Frequency: 1850.2 MHz Communication System: PCS 1900 ; Frequency: 1850.2 MHz; Duty Cycle: 1:8.3 Medium: HSL1900 Medium parameters used: f = 1850.2 MHz; σ = 1.37 mho/m; ε r = 39.1; ρ = 1000 kg/m 3 ; Liquid level: 155 mm Phantom section: Right Section ; DUT test position : Tilt ; Modulation type: GMSK Antenna type : Internal Antenna ; Air temp. : 21.9 degrees ; Liquid temp. : 20.7 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(5.26, 5.26, 5.26) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2005/3/23 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 2…

Text truncated - open the document above for the full version.

FCC ID: SNM-S789-1 Report No.: RF941201L151Report Format Version 2.0.4 FCC TEST REPORT (Part 24) REPORT NO.: RF941201L15 MODEL NO.: S789+ RECEIVED: Dec. 07, 2005 TESTED: Dec. 14 ~ 23, 2005 ISSUED: Jan. 09, 2006 APPLICANT: NINGBO BIRD CO., LTD ADDRESS: No. 999, Dacheng East Road, Fenghua City, Zhejiang, China ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 71 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. NO. 2177-01 0528 ILAC MRA FCC ID: SNM-S789-1 Report No.: RF941201L152Report Format Version 2.0.4 TABLE OF CONTENTS 1CERTIFICATION ..........................................................................................................4 2SUMMARY OF TEST RESULTS ..................................................................................5 2.1MEASUREMENT UNCERTAINTY..........................................................................6 3GENERAL INFORMATION...........................................................................................7 3.1GENERAL DESCRIPTION OF EUT .......................................................................7 3.2DESCRIPTION OF TEST MODES .........................................................................8 3.3GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................9 3.4DESCRIPTION OF SUPPORT UNITS ...................................................................9 4TEST TYPES AND RESULTS ....................................................................................10 4.1MODULATION CHARACTERISTICS ...................................................................10 4.1.1DESCRIPTION OF MODULATION TECHNIQUE ................................................10 4.1.2THE ACTIVE TIME SLOT 8 MODULATED FRAME PLOT................................... 11 4.2OUTPUT POWER MEASUREMENT ...................................................................13 4.2.1LIMITS OF OUTPUT POWER MEASUREMENT .................................................13 4.2.2TEST INSTRUMENTS..........................................................................................14 4.2.3TEST PROCEDURES ..........................................................................................15 4.2.4TEST SETUP........................................................................................................16 4.2.5EUT OPERATING CONDITIONS .........................................................................17 4.2.6TEST RESULTS ...................................................................................................18 4.3FREQUENCY STABILITY MEASUREMENT........................................................20 4.3.1LIMITS OF FREQUENCY STABILIITY MEASUREMENT ....................................20 4.3.2TEST INSTRUMENTS..........................................................................................20 4.3.3TEST PROCEDURE.............................................................................................21 4.3.4TEST SETUP........................................................................................................21 4.3.5TEST RESULTS ...................................................................................................22 4.4OCCUPIED BANDWIDTH MEASUREMENT .......................................................26 4.4.1LIMITS OF OCCUPIED BANDWIDTH MEASUREMENT ....................................26 4.4.2TEST INSTRUMENTS..........................................................................................26 4.4.3TEST SETUP........................................................................................................26 4.4.4TEST PROCEDURES ..........................................................................................27 4.4.5EUT OPERATING CONDITION............................................................................27 4.4.6TEST RESULTS ...................................................................................................28 4.5BAND EDGE MEASUREMENT............................................................................32 4.5.1LIMITS OF BAND EDGE MEASUREMENT .........................................................32 4.5.2TEST INSTRUMENTS..........................................................................................32 4.5.3TEST SETUP........................................................................................................32 4.5.4TEST PROCEDURES ..........................................................................................33 4.5.5EUT OPERATING CONDITION............................................................................33 4.5.6TEST RESULTS ...................................................................................................34 4.6CONDUCTED SPURIOUS EMISSIONS ..............................................................36 4.6.1LIMITS OF CONDUCTED SPURIOUS EMISSIONS MEASUREMENT ..............36 4.6.2TEST INSTRUMENTS..........................................................................................36 4.6.3TEST PROCEDURE.............................................................................................37 FCC ID: SNM-S789-1 Report No.: RF941201L153Report Format Version 2.0.4 4.6.4TEST SETUP........................................................................................................37 4.6.5EUT OPERATING CONDITIONS .........................................................................37 4.6.6TEST RESULTS ...........................................…

Text truncated - open the document above for the full version.

FCC ID: SNM-S789-1 Report No.: RF941201L1569Report Format Version 2.0.4 5 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST