SU5-TMX58085.8GHz Tx Module

Model TMX5808 ． Before operating this unit, please read manual thoroughly 。 OPERATING INSTRUCTIONS 5.8GHz TX Module Before using this product, please follow the safety guidelines listed below: ． This unit is designed for indoor use. To prevent electrical shock injury, and fire hazard, please do not place this product outdoors, or in the rain, or in humid surroundings such as in a bathroom, laundry room, basement, or near a pool area. ． Do not attempt to service this unit by disassembling the cabinet. This may expose you to dangerous voltage and othe r hazards. Refer all servicing to a qualified service center or return to the dealer. ． Should any liquid or solid object fall into the cabinet, or if you notice an unusual smell or smoke during operation, turn off the power and unplug the unit immediately. Have the unit checked by a qualified technician before further operation. Continued use without proper servicing may result in electrical shock and fire hazard. ． Use and connect only the accessories supplied for the unit. Do not use any other unauthorized accessories. ． If the cabinet is cracked or produces noise due to negligence or mishandling, turn power off and unplug the unit. Contact local qualified service center, or manufacturer as soon as possible. □ NOTE ： 1. This equipment has been certified and found to comply with the limits regulated by FCC. EMC. Therefore, it is designed to provide reasonable protection against interferenc e and will not cause interference with other appliance usage. However, it is imperative that user follows this manual's guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard or injury. 2. In order to improve the featured functions and quality of this product, the specifications are subject to change without notice from time to time. 1 Note: Please follow the safety guidelines. For any further safety questions about this unit, please contact manufacturer or a qualified service center. ！ SAFETY ． Always use discretion when installing video equipment es pecially when there is perceived privacy. Inquire regarding federal, state and/or local regulations applic able to the lawful installation of video equipment. Party consent may be required. VideoComm Technologies204-407 Speers Road, Oakville, Ontario, Canada L6K 3T5 ． Design and specifications subject to change without notice. Issue Date ： 07/2006 2 6. SPECIFICATIONS 1 ． Video Input & OutputLevel ...............................................1V p-p Impedance ......................................75 ohms System ............................................NTSC/PAL 2 ． DC Power Input ..............................DC 12V + 10% 3 ． Power Consumption ........................1 W 4 ． Dimensions .....................................27.5mm(H) * 52mm(W) * 78mm(L) 5 ． Weight ............................................45 g. 3,The term “IC:” before the radio certification number only signifies that Industry Canada Technical specifications were met.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 9 3 8 5. Troubleshooting Before operating the unit, please read this manual thoroughly. If you encounter problems with your unit, go through the check list below. Symptom Cause and Remedy Power light is not onNo picture ． Make sure power adaptor is connected to an A.C. outlet. ． Check the channel is in correct position NOTE Should any problem persist after you have made these checks, consult qualified service personnel. Do not attempt to open unit. Electrical shock or injury could result. 1 ． Product Introduction .......................................4 2 ． Unpacking the unit ........................................4 3 ． Basic operations and controls ...............................5 3 -1. Location and function of controls ......................5 4 ． Setting up and operating procedures .......................... 6 4-1. Connecting the cables ...............................6 4-2. Setting the channel............ ...................... 7 5 ． Troubleshooting ........................................ 8 6 ． Specifications .......................................... 9 CHAPTER TABLE OF CONTENTS PAGE 7 4 4-2 ： Setting the channel 1.Switch the rotary switch to select RF channel 8 7 6 5 4 3 2 1 ChannelNumber 8 7 6 5 4 3 2 1 Rotary switchposition 5866 5847 5828 5809 5790 5771 5752 5733 Frequency(MHz) 1. Product Introduction The Mini TX has the ability to Transmit CCD image by wireless at 5.8GHz ISM band 2. Unpacking the unit The unit carton contains the followin g items. If any of these items are missing,please contact the dealer from whom you purchased the unit for prompt replacement or call VideoComm 1. TMX5808 .............................. 1 2, Power Adapter ( ) ...... .1 Output: 12Vdc/400mA 5 6 4. Setting up and operating procedures 4-1 ： Connecting the cables This unit can be connected to composite video image equipments. Such equipments include VCR , Laser Disc player, video game system, CCD camera....etc. Connection diagram ： 3. Basic operations and controls 3-1. Location and function of controls TOP Panel Channel selection ● power light indicator

910805 1 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize ELECTRONICS TESTING CENTER, TAIWAN, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ELECTRONICS TESTING CENTER, TAIWAN on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ELECTRONICS TESTING CENTER, TAIWAN as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; 910805 2 f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jeff Johnson / Director VideoComm Technologies (1156488 Ontario Inc.) 204-407 Speers Road, Oakville, Ontario, Canada L6K 3T5

910805 3 Federal Communications Commission FCC ID: SU5-TMX5808 Product Name: 5.8GHz Tx Module Model Name: TMX5808 Trade Name: VIDEOCOMM Dear Sir: In accordance with 47 C.F.R. Section 0.459, we would like to request confidentiality on some exhibits we submitted for above application for the reason of trade secret. If those exhibits are available for public inspection, any person who once gets the information contained in those exhibits will be able to design and to make the same products very easily. This is a very serious problem and huge loss for us, because we did invest so much on it. Please be not made the Exhibit Types listed below routinely available for public inspection: Block Diagram and Schematics and Operation Description. By: By: Jeff Johnson (Signature) (Printed) Title : Director Applicant : VideoComm Technologies (1156488 Ontario Inc.) Address : 204-407 Speers Road, Oakville, Ontario, Canada L6K 3T5 Tel : 905-3390366 Fax: 905-3391776 Date : Aug. 23, 2006

1 Helen Zhao Subject:FW: FW: VideoComm Technologies (1156488 Ontario Inc.), FCC ID: SU5-TMX5808, Assessment NO.: AN06T6159, Notice#1 Exhibit-D-ID_Label_ rev.pdf From: iris Sent: Thursday, September 21, 2006 6:20 PM To: Helen Zhao Subject: Re: FW: VideoComm Technologies (1156488 Ontario Inc.), FCC ID: SU5-TMX5808, Assessment NO.: AN06T6159, Notice#1 Dear Helen, Pls find the revised label as attachment. Best Regards, Iris Lin -----Original Message----- Sent: Thursday, September 21, 2006 6:05 PM Subject: VideoComm Technologies (1156488 Ontario Inc.), FCC ID: SU5-TMX5808, Assessment NO.: AN06T6159, Notice#1 Question #1: Please modify FCC ID label format to show correct FCC ID. Best Regards, Helen Zhao The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Top View of EUT Bottom View of EUT ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Side View of EUT Side View of EUT ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Front View of EUT Rear View of EUT ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Mode: Adaptor Front View of Adaptor Rear View of Adaptor

36mm28mm

ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Internal View of EUT ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of PCB Solder View of PCB ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Component View of Adaptor’s PCB Solder View of Adaptor’s PCB

Rev. No 2.0 FCC Part 15 EMI TEST REPORT of E.U.T. : 5.8GHz Tx Module MODEL : TMX5808 FCC ID. : SU5-TMX5808 for APPLICANT : VideoComm Technologies (1156488 Ontario Inc.) ADDRESS : 204- 407 Speers Road, Oakville, Ontario, Canada L6K 3T5 Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34, LIN 5, DING FU TSUN, LINKOU HSIANG, TAIPEI HSIEN, TAIWAN, R.O.C. TEL : (02)26023052 FAX: (02)26010910 http// [email protected] Report Number : 06-04-RBF-105-01 ETC Report No. : 06-04-RBF-105-01 FCC ID. : SU5-TMX5808 Rev. No 2.0 TEST REPORT CERTIFICATION Applicant : VideoComm Technologies (1156488 Ontario Inc.) 204- 407 Speers Road, Oakville, Ontario, Canada L6K 3T5 Manufacturer : Chung- Hisn Electric & Machinery Mfg. Corp. No. 25, Wen- Te Rd., Lo - Shan Village, Kwei Shan Hsiang, Taoyuan Hsien, Taiwan, R.O.C. Description of EUT a) Type of EUT : 5.8GHz Tx Module b) Trade Name : VIDEOCOMM c) Model No. : TMX5808 d) Power Supply : I/P: 120Vac 60Hz 9.7W; O/P: 12Vdc 500mA e) Frequency Range : 5733MHz-5866MHz Regulation Applied : FCC Rules and Regulations Part 15 Subpart C (2003) I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.4, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. Issued Date : Aug. 05, 2006 Test Engineer : (Vincent Chang) Approve & Authorized Signer : Will Yauo, Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : 06-04-RBF-105-01 FCC ID. : SU5-TMX5808 Rev. No 2.0 Table of Contents Page 1 GENERAL INFORMATION........................................................................................................1 1.1 Product Description........................................................................................................................1 1.2 Characteristics of Device.................................................................................................................1 1.3 Test Methodology...........................................................................................................................1 1.4 Test Facility....................................................................................................................................1 2 PROVISIONS APPLICABLE........................................................................................................2 2.1 Definition........................................................................................................................................2 2.2 Requirement for Compliance...........................................................................................................3 2.3 Restricted Bands of Operation.........................................................................................................5 2.4 Labeling Requirement......................................................................................................................5 2.5 User Information.............................................................................................................................6 3. SYSTEM TEST CONFIGURATION............................................................................................7 3.1 Justification.....................................................................................................................................7 3.2 Devices for Tested System..............................................................................................................7 4 RADIATED EMISSION MEASUREMENT...............................................................................8 4.1 Applicable Standard........................................................................................................................8 4.2 Measurement Procedure.................................................................................................................8 4.3 Measuring Instrument....................................................................................................................10 4.4 Radiated Emission Data.................................................................................................................11 4.4.1 RF Portion..............................................................................................................................11 4.4.2 Other Emissions.......................................................................................................................14 4.5 Field Strength Calculation..............................................................................................................14 4.6 Photos of Radiation Measuring Setup............................................................................................15 5 CONDUCTED EMISSION MEASUREMENT.........................................................................16 5.1 Standard Applicable......................................................................................................................16 5.2 Measurement Procedure...............................................................................................................16 5.3 Conducted Emission Data.............................................................................................................17 5.4 Result Data Calculation.................................................................................................................19 5.5 Conducted Measurement Equipment.............................................................................................19 5.6 Photos of Conduction Measuring Setup.........................................................................................20 6 ANTENNA REQUIREMENT....................…

Text truncated - open the document above for the full version.

ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 Photos of Radiation Measuring Setup ETC Report No. : 06-04-RBF-105-01 FCC ID.: SU5-TMX5808 Rev. No 2.0 Photos of Conduction Measuring Setup