SWX-E7CPDigital Transmission Radio

E7 Campus 12/10/24, 1:25 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#index1/3 12/10/24, 1:25 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#index2/3 12/10/24, 1:25 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#index3/3

12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A1/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A2/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A3/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A4/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A5/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A6/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A7/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A8/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A9/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A10/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A11/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A12/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A13/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A14/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A15/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A16/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A17/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A18/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A19/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A20/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A21/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A22/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A23/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A24/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A25/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A26/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A27/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A28/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A29/31 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A30/31 ©2024 Ubiquiti Inc. All rights reserved. Ubiquiti, the Ubiquiti U logo, and UniFi are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Android, Google, Google Play, and the Google Play logo are trademarks of Google LLC. 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#A31/31

12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B1/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B2/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B3/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B4/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B5/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B6/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B7/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B8/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B9/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B10/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B11/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B12/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B13/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B14/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B15/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B16/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B17/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B18/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B19/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B20/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B21/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B22/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B23/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B24/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B25/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B26/28 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B27/28 ©2024 Ubiquiti Inc. All rights reserved. Ubiquiti, the Ubiquiti U logo, and UniFi are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Android, Google, Google Play, and the Google Play logo are trademarks of Google LLC. 12/10/24, 1:26 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#B28/28

12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C1/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C2/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C3/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C4/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C5/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C6/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C7/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C8/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C9/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C10/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C11/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C12/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C13/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C14/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C15/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C16/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C17/19 ©2024 Ubiquiti Inc. All rights reserved. Ubiquiti, the Ubiquiti U logo, and UniFi are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Android, Google, Google Play, and the Google Play logo are trademarks of Google LLC. 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C18/19 12/10/24, 1:27 PME7 Campus Installation Guide https://qig.uidev.tools/E7-Campus/#C19/19

E-Label User Information FCC ID: SWX-E7CP IC ID: 6545A-E7CP Ubiquiti Inc. will be incorporating the E-Label procedures per FCC KDB 784748-D02. The information below is what will be included in the E-Labeling. E-label and warning statements can be found in the device/controller GUI under Device > Settings > About. Detailed compliance information including Declaration of Conformity is available at the following internet address: ui.com/compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures; - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. When operating in the 5.925-7.125 GHz band: • The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft. • Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. ISED Canada CAN ICES-3 (A) / NMB-3 (A) This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (A) / NMB-3 (A) Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2. I’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. RSS-247 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices Operation shall be limited to indoor use only in the 5150 – 5250 MHz frequency band. RSS-248 Standard-power access points Operation on oil platforms, automobiles, trains, maritime vessels and aircraft shall be prohibited. This device shall not be used for control of or communications with unmanned aircraft systems. This device shall not be used on oil platforms. The device shall not be used on aircraft, except for the low-power indoor access points, indoor subordinate devices, low-power client devices, and very low-power devices operating in the 5925 – 6425 MHz band, that may be used on large aircraft as defined in the Canadian Aviation Regulations, while flying about 3,048 metres (10,000 feet) Information for antenna types(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 4.5.4 (c) shall be clearly indicated. The antenna height shall be determined by the installer or operator of the standard-power access point or fixed client device, or by automatic means. This information shall be stored internally in the device. Provision of accurate device information is mandatory. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilisées pour ce transmetteur doivent être installé en considérant une distance de séparation de toute personnes d’au moins 30 cm et ne doivent pas être localisé ou utilize en conflit avec tout autre antenne ou transmetteur.

Installation Guide 21 Instructions relatives au E-Label Avis de sécurité (si applicable) 1. Lisez, suivez et conservez ces instructions. 2. Tenez compte de tous les avertissements. 3. Utilisez uniquement les accessoires spéciés par le fabricant. ATTENTION : L’insusance de ventilation adéquate peut causer un risque d’incendie. Laissez un espace minimum de 20 mm devant tous les trous de ventilation pour un débit d’air adéquat. ATTENTION : Pour réduire le risque d’incendie ou d’électrocution, n’exposez pas ce produit à la pluie ou à l’humidité. ATTENTION : N’utilisez pas ce produit dans un endroit où il pourrait être submergé par l’eau. ATTENTION : Évitez d’utiliser ce produit pendant un orage électrique. Il peut y avoir un risque de choc électrique à distance par la foudre. Informations de sécurité électrique (si applicable) 1. La conformité est requise en ce qui concerne la tension, la fréquence et les exigences actuelles indiquées sur l’étiquette du fabricant. Une connexion à une autre source d’alimentation que celles précisées peut entraîner un mauvais fonctionnement, endommager l’équipement ou poser un risque d’incendie si les limites ne sont pas respectées. 2. Ce matériel ne contient pas de pièces devant être entretenues par l’opérateur. Les réparations doivent uniquement être fournies par un technicien qualié. 3. Ce matériel est fourni avec un cordon d’alimentation amovible qui dispose d’un l de terre de sécurité intégré destiné à la connexion à une prise de terre de sécurité. a. Ne remplacez pas le cordon d’alimentation par un cordon qui n’est pas approuvé. N’utilisez jamais un adaptateur pour connecter le matériel à une prise à 2 ls car cela nuira à la continuité du l de mise à la terre. b. Le matériel nécessite l’utilisation d’un l de mise à la terre dans le cadre de sa certication de sécurité. Toute modication ou tout mauvais usage peut constituer un risque de choc électrique pouvant entraîner une blessure grave, voire la mort. c. Contactez un électricien qualié ou le fabricant en cas de questions au sujet de l’installation avant la connexion du matériel. d. Une mise à la terre de protection est fournie par l’adaptateur CA indiqué. Le bâtiment fournira une protection appropriée de protection contre les courts-circuits. e. Une couche protectrice de liaison doit être installée conformément aux règles et réglementations locales. Informations la conformité sont disponibles à l’adresse internet suivante : ui.com/compliance Safety Notices (if applicable) 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specied by the manufacturer. WARNING: Failure to provide proper ventilation may cause re hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airow. WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or moisture. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information (if applicable) 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a dierent power source than those specied may result in improper operation, damage to the equipment, or pose a re hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualied service technician. 3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet. a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire. b. The equipment requires the use of the ground wire as a part of the safety certication, modication or misuse can provide a shock hazard that can result in serious injury or death. c. Contact a qualied electrician or the manufacturer if there are questions about the installation prior to connecting the equipment. d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection. e. Protective bonding must be installed in accordance with local national wiring rules and regulations. Compliance information is available at the following internet address: ui.com/compliance 640-02832-01 E-Label Instruction CAN(FR) US

427 West 12800 South Draper, UT 84020 Test Report Attachment FCC ID SWX-E7CP ISED ID 6545A-E7CP Equipment Under Test E7-CAMPUS Test Report Serial Number TR9598_01 Date of Test(s) 20-22, 25 November 2024 Report Issue Date 9 December 2024 Test Personnel Testing performed by Evan Hartzell Test Location Testing was performed at the Unified C ompliance Laboratory located at 427 West 12800 South, Draper, UT 84020. Unified C ompliance Laboratory is accredited by National Voluntary Laboratory Accreditation Program (NVLAP); NVLAP Code 600241-0 which is effective until 30 June 2025. This site has also been registered with Innovations, Science and Economic Development (ISED) department as was accepted under Appendix B, Phase 1 procedures of the APEC Tel MRA for Canadian recognition. ISED No.: 25346, effective until 30 June 2025. Unified Compliance Laboratory has been assigned Conformity Assessment Number US0223 by ISED and MRA US5037. NVLAP LAB CODE 600241-0 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 2 of 292 PROPRIETARY 1 AFC DUT Compliance Test Data 1.1 Tool Reports 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 3 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 4 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 5 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 6 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 7 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 8 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 9 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 10 of 292 PROPRIETARY 1.2 Server Validation 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 11 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 12 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 13 of 292 PROPRIETARY 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 14 of 292 PROPRIETARY 1.3 DUT Spectrum Inquiry Request/Response Logs 1.3.1 CT_AFC_SP_AP_AFCDRSA31_FrequencyChannel_20MHz_10625_1 ########################### 2024-11-22T22:12:42Z ########################### { "headers": { "Host": "testserver.wfatestorg.org", "Accept": "*/*", "Content-Type": "application/json", "X-Forwarded-For": "192.168.5.139", "X-Forwarded-Host": "testserver.wfatestorg.org", "X-Forwarded-Server": "testserver.wfatestorg.org", "Content-Length": "1346", "Connection": "Keep-Alive" }, "body": { "version": "1.4", "availableSpectrumInquiryRequests": [ { "requestId": "1104288827", "deviceDescriptor": { "serialNumber": "0xABCD1234", "certificationId": [ { "rulesetId": "US_47_CFR_PART_15_SUBPART_E", "id": "FCC_CERT_ID" } ] }, "location": { "ellipse": { "center": { "longitude": -90.050655, "latitude": 35.138359 }, "majorAxis": 1, "minorAxis": 1, "orientation": 0 }, "elevation": { 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 15 of 292 PROPRIETARY "height": 8, "heightType": "AGL", "verticalUncertainty": 8 }, "indoorDeployment": 1 }, "inquiredFrequencyRange": [ { "lowFrequency": 5945, "highFrequency": 6425 }, { "lowFrequency": 6525, "highFrequency": 6865 } ], "inquiredChannels": [ { "globalOperatingClass": 131, "channelCfi": [ 1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53, 57, 61, 65, 69, 73, 77, 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 16 of 292 PROPRIETARY 81, 85, 89, 93, 117, 121, 125, 129, 133, 137, 141, 145, 149, 153, 157, 161, 165, 169, 173, 177, 181 ] }, { "globalOperatingClass": 132, "channelCfi": [ 3, 11, 19, 27, 35, 43, 51, 59, 67, 75, 83, 91, 123, 131, 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 17 of 292 PROPRIETARY 139, 147, 155, 163, 171, 179 ] }, { "globalOperatingClass": 133, "channelCfi": [ 7, 23, 39, 55, 71, 87, 135, 151, 167 ] }, { "globalOperatingClass": 134, "channelCfi": [ 15, 47, 79, 143 ] }, { "globalOperatingClass": 135, "channelCfi": [ 7, 23, 39, 55, 71, 87, 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 18 of 292 PROPRIETARY 135, 151, 167 ] }, { "globalOperatingClass": 137, "channelCfi": [ 31, 63 ] } ], "minDesiredPower": -10 } ] } } ########################### 2024-11-22T22:12:42Z ########################### { "availableSpectrumInquiryResponses": [ { "response": { "responseCode": 0, "shortDescription": "SUCCESS" }, "availableFrequencyInfo": [ { "frequencyRange": { "highFrequency": 6045, "lowFrequency": 6025 }, "maxPsd": 21.4 }, { "frequencyRange": { "highFrequency": 6065, "lowFrequency": 6045 }, 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 19 of 292 PROPRIETARY "maxPsd": 13.0 }, { "frequencyRange": { "highFrequency": 6085, "lowFrequency": 6065 }, "maxPsd": 19.4 }, { "frequencyRange": { "highFrequency": 6105, "lowFrequency": 6085 }, "maxPsd": 9.8 }, { "frequencyRange": { "highFrequency": 6205, "lowFrequency": 6185 }, "maxPsd": 8.6 }, { "frequencyRange": { "highFrequency": 6225, "lowFrequency": 6205 }, "maxPsd": 13.7 }, { "frequencyRange": { "highFrequency": 6245, "lowFrequency": 6225 }, "maxPsd": 11.7 }, { "frequencyRange": { "highFrequency": 6265, 427 West 12800 South, Draper, UT 84020 TR9598_E7-Campus_FCC_15.407_AFC_Annex_00AA Page 20 of 292 PROPRIETARY "lowFrequency": 6245 }, "maxPsd": 17.9 }, { "frequencyRange": { "highFrequency": 6285, "lowFrequency": 6265 }, "maxPsd": 15.9 }, { "frequencyRange": { "highFrequency": 6305, "lowFrequency": 6285 }, "maxPsd": 12.1 }, { "…

Text truncated - open the document above for the full version.

427 West 12800 South, Draper, UT 84020 Photograph 1: View Test Set Up Radiated Emissions 30 – 1000 MHz Photograph 2: View Test Set Up Radiated Emissions 1 – 17 GHz 427 West 12800 South, Draper, UT 84020 Photograph 3: View Test Set Up Radiated Emissions 17 – 40 GHz Photograph 4: View Test Set Up RF Conducted 427 West 12800 South, Draper, UT 84020 Photograph 5: View Test Setup AC Mians Conducted Emissions 427 West 12800 South, Draper, UT 84020 Photograph 6: View Test Setup DFS Photograph 7: View Test Set Up AFC

Datasheet E7-Campus-US Access Point E7 Campus E7-Campus-US 2 of 3 Enterprise-grade, indoor/outdoor access point with 10-stream WiFi 7 performance, a 10 GbE uplink, and a redundant GbE port for high availability. Mechanical Hardware Dimensions Device: 250 x 250 x 45.5 mm (9.8 x 9.8 x 1.8") Articulating mount: Ø104 x 149.4 (Ø4.1 x 5.9") Weight Device: 2.2 kg (4.9 lb) Articulating mount: 0.9 kg (2 lb) Enclosure material UV-stabilized polycarbonate, aluminum alloy Mount material Stainless steel, aluminum alloy Pole mount diameter 1–2.5" (25–63.5 mm) on pipe outer diameter Wind survivability 164.75 N at 200 km/h (37 lbf at 125 mph) Weatherproong IPX6 IP67 with Waterproof Door Kit (Included) Networking interface (1) 1 GbE RJ45 port (1) 10 GbE RJ45 port Management interface Ethernet Power method PoE++ Power supply UniFi PoE switch Supported voltage range 42.5—57V DC Max. power consumption 44W Max. TX power 2.4 GHz23 dBm 5 GHz30 dBm 6 GHz30 dBm* *With 6 GHz Extended Range mode. Available in FCC/IC region only. MIMO 2.4 GHz2 x 2 (DL/UL MU-MIMO) 5 GHz4 x 4 (DL/UL MU-MIMO) 6 GHz4 x 4 (DL/UL MU-MIMO) Throughput rate 2.4 GHz688 Mbps (BW40) 5 GHz8.6 Gbps (BW240) 6 GHz11.5 Gbps (BW320) Antenna gain 2.4 GHz9 dBi 5 GHz12 dBi 6 GHz12 dBi Antenna Internal with directional patterns LEDs R/G/B Button Factory reset Mounting Articulating mount for wall, pole or ceiling mounting (Included) Ambient operating temperature -30 to 60° C (-22 to 140° F) E7-Campus-US Specifications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty ©2024 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, UniFi, and UniFi Network are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademarks are the property of their respective owners. Software Supported Data Rates Ambient operating humidity 5 to 95% noncondensing Certications CE WiFi standards 802.11a/b/g/n/ac/ax/be Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest trafc isolation Supported Concurrent clients 1,000+ 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n 6.5 Mbps to 600 Mbps (MCS0 - MCS15, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) 802.11be (WiFi 7) 7.3 Mbps to 11.5 Gbps (MCS0 - MCS13 NSS1/2/3/4, EHT 20/40/80/160/240/320)

427 West 12800 South Draper, UT 84020 Test Report Certification FCC ID SWX-E7CP ISED ID 6545A-E7CP Equipment Under Test E7-Campus Test Report Serial Number TR9551_01 Date of Test(s) 8, 17 – 24 and 31 May 2024 Report Issue Date 26 November 2024 Test Specification Applicant 47 CFR FCC Part 15, Subpart E Ubiquiti Inc. 685 Third Avenue New York, NY 10017 U.S.A. NVLAP LAB CODE 600241-0 427 West 12800 South, Draper, UT 84020 TR9551_E7-Campus_UNII-5_00AB Page 2 of 28 PROPRIETARY Certification of Engineering Report This report has been prepared by Unified C ompliance Laboratory (UCL) to document compliance of the device described below with the requirement of Federal Communication Commissions (FCC) Part 15, Subpart E. This report may be reproduced in full. Partial reproduction of this report may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested with the specifications provided by the manufacturer. Applicant Ubiquiti Inc. Manufacturer Ubiquiti Inc. Brand Name UBIQUITI Model Number E7-Campus FCC ID SWX-E7CP ISED ID 6545A-E7CP On this 26 th day of November 2024, I individually and for Unified C ompliance Laboratory certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge and are made in good faith. Although NVLAP has accredited the Unified C ompliance Laboratory testing facilities, this report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the U.S. federal government. Unified C ompliance Laboratory Written By: Clay Allred Reviewed By: Richard L. Winter 427 West 12800 South, Draper, UT 84020 TR9551_E7-Campus_UNII-5_00AB Page 3 of 28 PROPRIETARY Revision History Revision Description Date 01 Original Report Release 26 November 2024 427 West 12800 South, Draper, UT 84020 TR9551_E7-Campus_UNII-5_00AB Page 4 of 28 PROPRIETARY Table of Contents 1 Client Information ................................................................................................................................. 5 1.1 Applicant ....................................................................................................................................... 5 1.2 Manufacturer ................................................................................................................................. 5 2 Equipment Under Test (EUT) ............................................................................................................... 6 2.1 Identification of EUT .................................................................................................................... 6 2.2 Description of EUT ....................................................................................................................... 6 2.3 EUT and Support Equipment ........................................................................................................ 7 2.4 Interface Ports on EUT ...............................................…

Text truncated - open the document above for the full version.