SWX-NBM5AirMax AP

High-Performance airMAX CPE Model: NBE-M5-16 Introduction Thank you for purchasing the Ubiquiti Networks® NanoBeam ™ . This Quick Start Guide is designed to guide you through the installation, and show you how to access the airOS® Configuration Interface. This Quick Start Guide also includes the warranty terms and is for use with the NanoBeamM5, model NBE-M5-16. Package Contents NanoBeamM5Ball Joint Bracket Lock Ring High-Performance airMAX ™ CPE Model: NBE-M5-16 Metal StrapPoE Adapter (24V, 0.5A) Power Cord Quick Start Guide TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable ™ is designed for outdoor installations. It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. Installation Requirements The NanoBeam can be mounted on a pole or to a wall. A Metal Strap (included) is used for pole-mounting. For wall-mounting, a suitable fastener such as a screw or bolt (not included) is required. • Screwdriver (for pole-mounting) • Wall Fastener (for wall-mounting) • Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial-grade shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable Hardware Overview LEDs Reset Button Ethernet Port (10/100 Mbps) LEDs Power The Power LED will light blue when the device is connected to a power source. Ethernet The Ethernet LED will light steady blue when an active Ethernet connection is made and flash when there is activity. Signal In airOS, you can modify the wireless signal strength threshold values for each LED on the Advanced tab under Signal LED Thresholds. The default values are shown below: LED will light blue when the wireless signal strength is above -94 dBm. LED will light blue when the wireless signal strength is above -80 dBm. LED will light blue when the wireless signal strength is above -73 dBm. LED will light blue when the wireless signal strength is above -65 dBm. Hardware Installation 1. Remove the port cover by pressing down the center of the cover and sliding the cover out. 2. Connect an Ethernet cable to the Ethernet port. 3. Replace the port cover. *720-00061-01* 720-00061-01 Pole-Mount 1. Seat the Ball Joint Bracket into the socket of the NanoBeam. 2. Slip the Lock Ring over the Ball Joint Bracket and turn it clockwise to secure it to the NanoBeam. Keep the Lock Ring loose enough to allow the NanoBeam to pivot for aiming. 3. Open the Metal Strap and feed it through the base of the Ball Joint Bracket. 4. Wrap the Metal Strap around the pole. Use a screwdriver to turn the screw clockwise and securely fasten the strap to the pole. Wall-Mount The NanoBeam must be mounted directly to a stud or other structurally stable surface. 1. Mark the desired location of the mounting point. 2. Drill a pilot hole for the fastener. 3. Insert the Ball Joint Bracket into the Lock Ring with the threads of the Lock Ring facing the ball joint. 4. Attach the Ball Joint Bracket to the wall by inserting a fastener through the center of the ball joint, and into the hole in the wall. Securely tighten the fastener. 5. Attach the NanoBeam to the Ball Joint Bracket and turn the Lock Ring to secure it. Keep the Lock Ring loose enough to allow the NanoBeam to pivot for aiming. Aiming 1. Ensure the Ethernet cable is pointed towards the ground. 2. Aim the front of the NanoBeam towards the other end of the wireless link. 3. Hand-tighten the Lock Ring to lock the aim. Connecting Power 1. Connect the other end of the Ethernet cable from the NanoBeam to the Ethernet port labeled POE on the PoE Adapter. 2. Connect an Ethernet cable from your LAN or computer to the Ethernet port labeled LAN on the PoE Adapter. 3. Connect the Power Cord to the power port on the PoE Adapter. Connect the other end of the Power Cord to a power outlet. Accessing airOS Verify connectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the NanoBeam. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser and type https://192.168.1.20 in the address field. Press enter (PC) or return (Mac). 4. The login screen will appear. Enter ubnt in the Username and Password fields. Select your Country and Language. You must agree to the Terms of Use to use the product. Click Login. Note: U.S. product versions are locked to the U.S. Country Code to ensure compliance with FCC regulations. Customize additional settings as needed to complete the configuration. For additional details on the airOS Configuration Interface, refer to the User Guide available at documentation.ubnt.com/airmax Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements. Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna and Output Power fields are provided to the professional installer to assist in meeting regulatory requirements. Specifications NBE-M5-16 Dimensions140 x 140 x 54 mm (Mount Included) Weight320 g (Mount Included) Operating Frequency. .USA: 5150~ 5250MHz . 5725~ 5850MHz Gain 8.06dBi Networking Interface(1) 10/100 Ethernet Port EnclosureOutdoor UV Stabilized Plastic Max. Power Consumption6 W Power Supply24V, 0.5A PoE Adapter (Included) Power MethodPassive PoE (Pairs 4, 5+; 7,8 Return) Wind Loading4.8 lbf @ 125 mph Wind Survivability125 mph CertificationsCE, FCC, IC MountingPole-Mount (Kit Included) Wall-Mount …

Text truncated - open the document above for the full version.

Frequency (MHz) 5150 5200 5250 5300 5350 5400 5450 5500 5550 5600 5650 5700 5750 5800 5850 Point ValuesAnt. Port Input Pwr. (dBm) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Tot. Rad. Pwr. (dBm) -2.91 -3.04 -2.70 -2.83 -3.05 -3.06 -3.28 -3.49 -3.46 -3.73 -3.94 -4.03 -4.17 -4.31 -4.35 Peak EIRP (dBm) 3.89 4.42 5.36 5.87 6.54 7.23 7.46 7.67 8.06 8.02 7.97 7.77 7.35 6.96 6.43 Directivity (dBi) 6.80 7.46 8.06 8.70 9.59 10.28 10.74 11.16 11.51 11.76 11.91 11.80 11.52 11.26 10.78 Efficiency (dB) -2.91 -3.04 -2.70 -2.83 -3.05 -3.06 -3.28 -3.49 -3.46 -3.73 -3.94 -4.03 -4.17 -4.31 -4.35 Efficiency (%) 51.19 49.63 53.66 52.07 49.51 49.47 47.02 44.82 45.12 42.33 40.38 39.52 38.27 37.10 36.75 Gain (dBi) 3.89 4.42 5.36 5.87 6.54 7.23 7.46 7.67 8.06 8.02 7.97 7.77 7.35 6.96 6.43 NHPRP ±Pi/4 (dBm) -4.23 -4.36 -4.00 -4.08 -4.24 -4.20 -4.40 -4.58 -4.52 -4.77 -4.98 -5.10 -5.29 -5.50 -5.61 NHPRP ±Pi/6 (dBm) -5.46 -5.57 -5.15 -5.16 -5.24 -5.16 -5.33 -5.49 -5.42 -5.67 -5.89 -6.04 -6.27 -6.54 -6.70 NHPRP ±Pi/8 (dBm) -6.33 -6.42 -5.98 -5.95 -5.99 -5.87 -6.02 -6.17 -6.09 -6.35 -6.58 -6.74 -6.98 -7.28 -7.45 Upper Hem. PRP (dBm) -4.99 -5.09 -4.76 -4.93 -5.18 -5.20 -5.40 -5.59 -5.56 -5.83 -6.03 -6.12 -6.26 -6.40 -6.45 Lower Hem. PRP (dBm) -7.10 -7.29 -6.94 -7.01 -7.17 -7.15 -7.40 -7.64 -7.61 -7.90 -8.12 -8.21 -8.36 -8.49 -8.51 3D Pattern:X-Y cut: NBE-M5-16 Test Results Total Response (dB) -205-15-10-50 X YZ Azimuth = 0.0Elevation = 0.0Roll = 0. 0 Total 0 30 330 5550 X-Z cut:Y-Z cut: Power (dBm) Angl e (°) Scale: 2/divMin: -12Max: 10 180 210 60 240 90 270 120 300 150 Total Power (dBm) Angle (°) Scale: 5/divMin: -20Max: 10 0 180 30 210 60 240 90 270 120 300 150 330 5550 Total Power (dBm) Angle (°) Scale: 2/divMin: -16Max: 2 0 180 30 210 60 240 90 270 120 300 150 330 5550

Frequency (MHz) 5150 5200 5250 5300 5350 5400 5450 5500 5550 5600 5650 5700 5750 5800 5850 Point ValuesAnt. Port Input Pwr. (dBm) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Tot. Rad. Pwr. (dBm) -3.30 -3.54 -3.43 -3.82 -4.23 -4.35 -4.65 -5.00 -5.11 -5.41 -5.54 -5.64 -5.71 -5.80 -5.89 Peak EIRP (dBm) 5.31 4.79 4.97 4.68 4.58 4.78 4.67 4.32 4.21 3.98 4.01 4.32 4.58 4.70 4.78 Directivity (dBi) 8.60 8.33 8.40 8.51 8.81 9.12 9.32 9.32 9.33 9.38 9.55 9.97 10.29 10.50 10.67 Efficiency (dB) -3.30 -3.54 -3.43 -3.82 -4.23 -4.35 -4.65 -5.00 -5.11 -5.41 -5.54 -5.64 -5.71 -5.80 -5.89 Efficiency (%) 46.81 44.28 45.36 41.47 37.74 36.76 34.28 31.62 30.82 28.78 27.91 27.27 26.84 26.31 25.75 Gain (dBi) 5.31 4.79 4.97 4.68 4.58 4.78 4.67 4.32 4.21 3.98 4.01 4.32 4.58 4.70 4.78 NHPRP ±Pi/4 (dBm) -4.73 -5.00 -4.87 -5.26 -5.70 -5.86 -6.18 -6.53 -6.64 -6.92 -6.99 -7.03 -7.05 -7.10 -7.17 NHPRP ±Pi/6 (dBm) -6.02 -6.34 -6.19 -6.58 -7.06 -7.25 -7.57 -7.93 -8.06 -8.34 -8.39 -8.38 -8.36 -8.37 -8.43 NHPRP ±Pi/8 (dBm) -6.88 -7.20 -7.05 -7.44 -7.93 -8.12 -8.44 -8.81 -8.95 -9.25 -9.32 -9.30 -9.25 -9.22 -9.26 Upper Hem. PRP (dBm) -6.37 -6.70 -6.71 -7.25 -7.80 -7.98 -8.28 -8.67 -8.82 -9.16 -9.26 -9.30 -9.37 -9.49 -9.65 Lower Hem. PRP (dBm) -6.24 -6.41 -6.19 -6.45 -6.75 -6.81 -7.12 -7.44 -7.52 -7.78 -7.94 -8.09 -8.16 -8.22 -8.27 3D Pattern:X-Y cut: NBE-M5-16 Test Results Total Response (dB) -2010-15-10-505 X YZ Azimuth = 0.0Elevation = 0.0Roll = 0.0 Total 0 30 330 5550 X-Z cut:Y-Z cut: Power (dBm) Angle (°) Scale: 5/divMin: -25Max: 10 180 210 60 240 90 270 120 300 150 Total Power (dBm) Angle (°) Scale: 5/divMin: -25Max: 5 0 180 30 210 60 240 90 270 120 300 150 330 5550 Total Power (dBm) Angle (°) Scale: 2/divMin: -16Max: 0 0 180 30 210 60 240 90 270 120 300 150 330 5550

Frequency (MHz) 5150 5200 5250 5300 5350 5400 5450 5500 5550 5600 5650 5700 5750 5800 5850 Point ValuesAnt. Port Input Pwr. (dBm) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Tot. Rad. Pwr. (dBm) -2.56 -3.02 -3.13 -3.57 -3.86 -4.09 -4.36 -4.40 -4.43 -4.42 -4.72 -5.51 -6.55 -7.64 -8.12 Peak EIRP (dBm) 8.50 8.75 9.26 9.43 9.79 10.18 10.31 10.44 10.42 10.13 9.45 8.09 6.33 4.93 4.74 Directivity (dBi) 8.06 8.77 9.40 10.00 10.65 11.27 11.67 11.84 11.86 11.56 11.17 10.60 9.88 9.57 9.86 Efficiency (dB) -2.56 -3.02 -3.13 -3.57 -3.86 -4.09 -4.36 -4.40 -4.43 -4.42 -4.72 -5.51 -6.55 -7.64 -8.12 Efficiency (%) 55.43 49.89 48.62 43.96 41.16 38.97 36.65 36.29 36.05 36.13 33.72 28.09 22.13 17.24 15.41 Gain (dBi) 8.50 8.75 9.26 9.43 9.79 10.18 10.31 10.44 10.42 10.13 9.45 8.09 6.33 4.93 4.74 NHPRP ±Pi/4 (dBm) -3.74 -4.13 -4.15 -4.51 -4.74 -4.92 -5.13 -5.13 -5.13 -5.12 -5.42 -6.23 -7.33 -8.49 -9.04 NHPRP ±Pi/6 (dBm) -4.90 -5.22 -5.13 -5.41 -5.56 -5.68 -5.85 -5.83 -5.85 -5.88 -6.23 -7.07 -8.21 -9.39 -9.93 NHPRP ±Pi/8 (dBm) -5.83 -6.10 -5.95 -6.18 -6.27 -6.35 -6.50 -6.47 -6.51 -6.57 -6.96 -7.82 -8.97 -10.14 -10.65 Upper Hem. PRP (dBm) -6.49 -6.96 -7.08 -7.47 -7.67 -7.88 -8.08 -8.14 -8.21 -8.26 -8.58 -9.33 -10.25 -11.18 -11.56 Lower Hem. PRP (dBm) -4.81 -5.27 -5.37 -5.84 -6.19 -6.45 -6.76 -6.79 -6.79 -6.74 -7.02 -7.85 -8.97 -10.17 -10.74 3D Pattern:X-Y cut: NBE-M5-16 Test Results Total Response (dB) -2015-15-10-50510 X YZ Azi muth = 0. 0El e va ti o n = 0. 0Roll = 0.0 Total 0 30 330 5550 X-Z cut:Y-Z cut: Power (dBm) Angle (°) Scale: 5/divMin: -20Max: 15 180 210 60 240 90 270 120 300 150 TotalTotal Power (dBm) Angle (°) Scale: 5/divMin: -30Max: 15 0 180 30 210 60 240 90 270 120 300 150 330 5550 Power (dBm) Angl e (°) Scale: 5/divMin: -20Max: 5 0 180 30 210 60 240 90 270 120 300 150 330 5550

Nov. 20, 2013 Federal Communications Commission Authorization and Evaluation Division Dear Regulatory Authority, We, the undersigned, hereby declare that Declaration of Conformity procedures will be applied to the digital device portion of the following product: Type: AirMax AP Model: NBE-M5-16 Test report: E1/2013/90077 SGS Taiwan Ltd.: TW1016 ------------------------------------------------------------------------------------------------- ( Product Identification ) It is herewith confirmed and found to comply with the requirements set up by ANSI C63.4 & FCC PART 15 regulations for the evaluation of electromagnetic compatibility. This Device complies with Part 15 of the FCC rules, operation is subject to the following two conditions. This device may not cause harmful interference and, This device must accept any interference received, including interference that may cause undesired operation. TEST LABORATORY SGS Taiwan Ltd. Electronics & Communication Laboratory No. 134, Wu Kung Rd., New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan 24803 FCC Registration Number: 94644. TAF Accreditation No.: L0513-090505, BSMI MRA Test Lab. Sincerely, Jocelyn Wang / Compliance Manager / Ubiquiti Networks, Inc.

RF_160, Issue 02 Declaration of Authorization We Name: Ubiquiti Networks, Inc. Address: 12F, No. 105, Song Ren Rd., SinYi District, Taipei 110, Taiwan City: Taipei Country: Taiwan Declare that: Name Representative of agent: Willis Chen (1) Agent Company name: SGS Taiwan Ltd. Address: No. 134, Wu Kung Rd., New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan 24803 City: New Taipei City Country Taiwan is authorized to apply for Certification of the following product(s): Product description: AirMax AP Type designation: NBE-M5-16 Trademark: UBIQUITI on our behalf. Date: Nov. 20, 2013 City: Taipei Name: Jocelyn Wang (2) Function: Compliance Manager Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Ubiquiti Networks, Inc. Address : 12F, No. 105, Song Ren Rd., SinYi District, Taipei 110, Taiwan City: Taipei Country: Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: SWX-NBM5 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: Nov. 20, 2013 Name and signature of applicant: Jocelyn Wang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1

All View of EUT Front View of EUT Back View of EUT Side View of EUT – 1 Side View of EUT – 2 Adapter

Open View of EUT – 1 Open View of EUT – 2 Open View of EUT – 3 Internal View of EUT – 1 Internal View of EUT – 2 Internal View of EUT – 3 WLAN Module WLAN Antenna

1 MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 S TANDARD APPLICABLE According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Mobile device, the MPE is required. According to §1.1310 and §2.1093 RF exposure is calculated. Limits for Maximum Permissive Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-15000 / / 1.0 30 F = frequency in MHz * = Plane-wave equipment power density MPE Prediction (802.11a (Main)) Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR 2 Where: S = Power density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna 1.2 MAXIMUM PERMISSIBLE EXPOSURE (MPE) EVALUATION & MPE PREDICTION 802.11a (Main) Frequency (MHz) Reading Power (dBm) Output Power (W) Limit (W) 5745.00 10.86 0.012191 5785.0010.660.011641 5825.0010.180.010421 Average Power Output (dB m Maximum average output power at antenna input 10.86 (dBm) Maximum average output power at antenna input 12.18989599 (mW) Duty cycle: 100 (%) Maximum Pav : 12.18989599 (mW) Antenna gain (typical): 4.78 (dBi) Maximum antenna gain: 3.006076303 (numeric) Prediction distance: 20 (cm) Prediction frequency: 5745 (MHz) MPE limit for uncontrolled exposure at prediction 1 (mW/cm2) Power density at predication frequency at 20 (cm) 0.0072937 (mW/cm^2) Measurement Result The predicted power density level at 20 cm is 0.0072937 W/cm 2 . This is below the uncontrolled exposure limit of 1 mW/cm 2 at 5745MHz. 802.11n (5GHz)_20M MIMO Chain 0+ Chain1 Frequency (MHz) Reading Power (dBm) Output Power (W) Limit (W) 5745.0014.480.028051 5785.00 14.54 0.028441 5825.0013.460.022181 Average Power Output (dB m Maximum average output power at antenna input 14.54 (dBm) Maximum average output power at antenna input 28.44461107 (mW) Duty cycle: 100 (%) Maximum Pav : 28.44461107 (mW) Antenna gain (typical): 8.09 (dBi) Maximum antenna gain: 6.441692655 (numeric) Prediction distance: 20 (cm) Prediction frequency: 5785 (MHz) MPE limit for uncontrolled exposure at prediction 1 (mW/cm2) Power density at predication frequency at 20 (cm) 0.0364712 (mW/cm^2) Measurement Result The predicted power density level at 20 cm is 0.0364712 W/cm2. This is below the uncontrolled exposure limit of 1 mW/cm2 at 5785MHz.

Report No.: E2/2013/90039 FCC ID: SWX-NBM5 Issue Date: Nov. 21, 2013 IC: 6545A-NBM5 Page: 1 of 105 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT AND INDUSTRY CANADA RSS 210 OF Product Name: AirMax AP Brand Name: UBIQUITI Model No.: NBE-M5-16 Model Difference: N/A FCC ID: SWX-NBM5 IC: 6545A-NBM5 Report No.: E2/2013/90039 Issue Date: Nov. 21, 2013 FCC Rule Part: §15.247, Cat: DTS IC Rule Part: RSS-210 issue 8 :2010, Annex 8 Prepared for FCC: Ubiquiti Networks, Inc. 12F, No. 105, Son g Ren Rd., Sin Yi District, Taipei 110, Taiwan Prepared for IC: UBIQUITI NETWORKS 12F, No. 105, Son g Ren Rd., Sin Yi District, Taipei 110, Taiwan Prepared by: SGS Taiwan Ltd. Electronics & Communication Laboratory No.2, Keji 1st Rd., Guishan Township, Taoyuan County, Taiwan 333 Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This docu- ment may be altered or revised by SGS Taiwan Ltd. person- nel only, and shall be noted in the revision section of the document. Report No.: E2/2013/90039 FCC ID: SWX-NBM5 Issue Date: Nov. 21, 2013 IC: 6545A-NBM5 Page: 2 of 105 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group VERIFICATION OF COMPLIANCE Applicant for FCC: Ubiquiti Networks, Inc. 12F, No. 105, Song Ren Rd., Sin Yi District, Taipei 110, Taiwan Applicant for IC: UBIQUITI NETWORKS 12F, No. 105, Song Ren Rd., Sin Yi District, Taipei 110, Taiwan Product Name: AirMax AP Brand Name: UBIQUITI Model No.: NBE-M5-16 Model Difference: N/A FCC ID: SWX-NBM5 IC: 6545A-NBM5 File Number: E2/2013/90039 Date of test: Oct. 30, 2013 ~ Nov. 21, 2013 Date of EUT Received: Oct. 30, 2013 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Electronics & Communication Laboratory The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4:2009 and RSS-Gen. issue 3 the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radi- ated emission limits of FCC Rules Part 15.247 and IC RSS 210 issue 8: 2010 Annex 8. The test results of this report relate only to the tested sample identified in this report. Test By: Date Nov. 21, 2013 Jazz Huang / Sr. Engineer Prepared By: Date Nov. 21, 2013 Julia Chang/ Clerk Approved By: Date Nov. 21, 2013 Jim Chang / Supervisor Report No.: E2/2013/90039 FCC ID: SWX-NBM5 Issue Date: Nov. 21, 2013 IC: 6545A-NBM5 Page: 3 of 105 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm …

Text truncated - open the document above for the full version.

Radiated Emission Set up Photos (E1 Plane) Conducted Emission Set up Photo Conducted Setup Photo (Measurement at Antenna Port)