SWX-U7IDDigital Transmission Radio

+1 866 885 4575 [email protected] 5809 US-2, Suite B Albeni Plaza Priest River, ID 83856 USA www.icertifi.com July 24, 2026 To Whom It May Concern: Subject: Attestation of Physical Location - U.S. Agent for Service of Process I, Paul Preston, hereby attest that I am the person designated as the U.S. Agent for Service of Process in the applicable designation letter for Ubiquiti Inc. I further confirm that I am physically located at the following address: 5809 US-2, Suite B Albeni Plaza Priest River, Idaho 83856 United States This address is a physical business location where I may receive service of process and official correspondence on behalf of Ubiquiti Inc. in connection with applicable Federal Communications Commission requirements. I certify that the foregoing information is true and correct. Sincerely, Paul Preston President Americas Compliance Consulting LLC dba iCertifi Designated U.S. Agent for Service of Process Zoho Sign Document ID: 31E414DE-_BXFVJFCKFB8_KUCHCRCCKDOV4HFLB278FVZQ_49MFU

Federal Communicaons Commission Authorizaon and Evaluaon Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 16/02/2026 Ref: A esta on Statement Part 2.911(d)(7) Filing FCC ID: SWX Ubiqui Inc cerfies that, as of the dates of this applicaon, Americas Compliance Consulng LLC dba iCerfi is our designated U.S. agent for service of process for the above referenced FCC ID. Manufacturer accepts to maintain an agent for no less than two year aer the grantee has terminated all marke ng and importaon or the conclusion of any commission-related proceeding involving the equipment. iCerfi accepts, as of the date of the filing of the applicaon, the obligaon of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Informaon: Name: Americas Compliance Consulng LLC dba iCerfi FCC FRN: 0033399411 Address: 5809 US-2, Suite B, Albeni Plaza Priest River, Idaho 83856, United States Contact Person: Paul Preston Tel: +1 (866) 885-4575 Email: fccagent@icerfi.com Sincerely, Ubiqui IncAmericas Compliance Consulng LLC dba iCerfi FRN: 0012268215FRN: 0033399411 Alex MaconPaul Preston [email protected]@icerfi.com 1-408-942-3084+1 (866) 885-4575 Signature: Signature:

Date: 20 August 2026 Federal Communications Commission (the “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(i) Filing – FCC ID: SWX-U7ID Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization under 47 CFR §2.903. Furthermore, the equipment is not produced or provided by any entity listed on the FCC’s Covered List. This includes, but is not limited to, cybersecurity and antivirus software developed or distributed by Kaspersky Lab, Inc., its successors, or its assignees. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer

Date: 20 August 2026 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(ii) Filing – FCC ID: SWX-U7ID Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List 1 (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer 1 https://www.fcc.gov/supplychain/coveredlist

www.ui.com Date: 20 August 2026 Federal Communications Commission 7435 Oakland Mills Rd. Columbia, MD 21046 RE: Request for Confidentiality In reference to the application under FCC ID: SWX-U7ID, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commission’s Rules, Ubiquiti Networks hereby requests permanent confidential treatment of the accompanying information as outlined below: Block Diagram Schematics Theory of Operation Software Security The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the important rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short term confidentiality on the following attachments until 180 days from grant date. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alex Macon Ubiquiti lnc. Compliance Manager

685 3 RD AVE. • NEW Y0RK, NY 10071 • www.ui.com Date: 20 August 2026 Federal Communications Commission 7435 Oakland Mills Rd. Columbia, MD 21046 RE: Request for Original Equipment Certification – FCC ID: SWX-U7ID It is hereby requested that Ubiquiti Inc. obtain FCC Original Equipment Certification of a radio apparatus on the Ubiquiti Inc. product U7-Industrial. The associated FCC ID: number is listed above. The U7-Industrial is an outdoor WiFi 7 access point with a dual band 2.4 GHz and 5 GHz 2x2 transmitter. The U7-Industrial supports 3.6 Gbps aggregate throughput rate. The U7- Industrial contains built-in high-gain antennas with removable reflectors for adjustable beam width, or external omni antennas for 360-degree coverage. The U7-Industrial is powered by a U-POE+ power adapter. Sincerely, Alex Macon Ubiquiti lnc. Compliance

www.ui.com Power of Attorney Date: May 8, 2022 Dear Sir or Madam, I hereby have entrusted the following individuals and entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following individuals and entity to be a proxy to handle all certification matters. Clay Allred Joseph W. Jackson Richard L. Winter Tyler Parry Kimberly Rodriguez Tanner Langley Unified Compliance Laboratories Address : 427 W 128000 South Draper Utah 84020 e-mail : [email protected] Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York NY 10017 United States Of America Sincerely, Alex Macon Ubiquiti, lnc. Compliance Manager

E-Label Information FCC ID: SWX-U7ID IC ID: 6545A-U7ID Model: U7-Industrial Ubiquiti Inc. will be incorporating the E-Label procedures per FCC KDB 784748-D02. The information below is what will be included in the E-Labeling. In the end use the device will either be connected to a screen or connected to a controller that will be connected to a screen. E-label and warning statements can be found in the device/controller GUI under: Site Manager > Update Manager > Show Details. Detailed compliance information including Declaration of Conformity is available at the following internet address: ui.com/compliance No special accessories or supplemental plug-ins are required to access the E-label information and it is easily accessible. The regulatory information is clearly legible in the web GUI without the aid of magnification. The regulatory information is secure and is factory-set in an unalterable format and the information is in the control of the end user. The information is programmed by the manufacturer and is not modifiable or removable during the course of normal authorized activities by a third party. This information is not modifiable by the user. Equipment setup is through an app or web GUI. Please see label sample and label location exhibits stating information on the gift box of this product. The following is an example of the information provided for a released product.

M/N: U7-Industrial Made in xxxxxx IP67 Ubiquiti Inc. 685 Third Avenue, New York, NY 10017 USA On Gift Box Label Location on Bottom of DUT yywwc xxxxxxxxxXXX YYY-yyy-YYY

M/N: U7-Industrial Made in xxxxxx IP67 Ubiquiti Inc. 685 Third Avenue, New York, NY 10017 USA On Gift Box Label Location on Bottom of DUT yywwc xxxxxxxxxXXX YYY-yyy-YYY

Maximum Permissible Exposure FCC Part 2 Sections §2.1091 and §2.1093 Test Requirement(s): §15.407(f): U-NII devices are subject to the radio frequency radiation exposure requirements specified in §1.1307(b), §2.1091 and §2.1093 of this chapter, as appropriate. All equipment shall be considered to operate in a “general population/uncontrolled” environment. RF Exposure Requirements: §1.1307(b)(1) and §1.1307(b)(2): Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. RF Radiation Exposure Limit: §1.1310: As specified in this section, the Maximum Permissible Exposure (MPE) Limit shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Sec. 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Sec. 2.1093 of this chapter. MPE Limit: EUT’s operating frequencies @ WiFi 2412 – 2462 MHz; UNII-1 5180 – 5240 MHz; UNII-2a 5260 – 5320 MHZ; UNII-2c 5500 – 5720 MHz; UNII-3 5745 – 5825 MHz; Limit for Uncontrolled exposure: 1 mW/cm 2 or 10 W/m 2 Equation from page 18 of OET 65, Edition 97-01 S = PG / 4R 2 or R = √(PG / 4S) where, S = Power Density (mW/cm 2 ) P = Power Input to antenna (mW) G = Antenna Gain (numeric value) R = Distance (cm) Test Results: External Dipole Antenna FCC Frequency (MHz) Con. Pwr. (dBm) Con. Pwr. (mW) Ant. Gain (dBi) Ant. Gain numeric Pwr. Density (mW/cm 2 ) Limit (mW/cm 2 ) Margin Distance (cm) Result 2437* 29.48 887.16 5 3.16 0.25 1.0 -0.75 30 Pass 5240 26.78 476.43 6 3.98 0.17 1.0 -0.83 30 Pass 5290 23.80 239.88 6 3.98 0.08 1.0 -0.92 30 Pass 5570 23.98 250.03 6 3.98 0.09 1.0 -0.91 30 Pass 5775* 27.62 578.10 6 3.98 0.20 1.0 -0.80 30 Pass *Simultaneous Transmission (Worse case): 0.45 1.0 -0.55 30 Pass Internal Antenna FCC Frequency (MHz) Con. Pwr. (dBm) Con. Pwr. (mW) Ant. Gain (dBi) Ant. Gain numeric Pwr. Density (mW/cm 2 ) Limit (mW/cm 2 ) Margin Distance (cm) Result 2437* 25.85 384.59 10 10.0 0.34 1.0 -0.66 30 Pass 5200 23.19 208.45 12 15.85 0.30 1.0 -0.70 30 Pass 5270 17.87 61.24 12 15.85 0.09 1.0 -0.91 30 Pass 5510 17.84 60.81 12 15.85 0.09 1.0 -0.91 30 Pass 5825* 23.96 248.89 12 15.85 0.35 1.0 -0.65 30 Pass *Simultaneous Transmission (Worse case): 0.69 1.0 -0.31 30 Pass The safe distance for SWX-U7ID where Power Density is less than the MPE Limit listed above was found to be 30 cm. This device does not perform power tune-ups, therefore the maximum power is used for this analysis. All chains were measured and summed under the guidance of KDB 789033 Section II. E.2. and KDB 662911 D01.

U7-Industrial Antenna Datasheet Authorized by: Hans Chen Outline •AUT Environment −Instrument Information −Test Method •Antenna Performance −WIFI 2G Antenna −WIFI 5G Antenna AUT Environment Instrument Information Instrument ListManufacturerCalibration DateCalibration Due Date Transfer SwitchingMVG2025/11/132026/11/12 TX AmplificationMVG2025/11/132026/11/12 RX AmplificationMVG2025/11/132026/11/12 Active SwitchingMVG2025/11/132026/11/12 Network AnalyzerR&S ZNB2025/11/132026/11/12 Radiocom TesterAnritsu MT88212025/11/132026/11/12 Full SystemSG24-Standard2025/11/132026/11/12 Calibration Record •Fullsystemcalibration,includingeachinstrument,willproceedonceper year. •Regularcalibration,includingefficiency/peakgainconsistencycheck,will proceedwithbi-monthly. Test Method Measurement Standard •Tofixdeviceontheturntable,andlaserpositioningtheheightlevelinthecenterofthe probe. •AlignthechambercoordinateandUIcoordinate. •SamplingtheantennapatternaccordingtoPhiincrement5º/Thetaincrement5º. •Finished3DdatacollectionalongwithTheta-175º~Theta175ºandPhi0º~Phi180º •Frequencyresolutionsetupdependsonthedifferentbands. X Y Z Antenna Performance [U7-Industrial-AP] WIFI 2G Antenna Performance WIFI 2G Working frequency2400-2500 MHz Antenna typePatch Gain8.0 / 9.0 / 10.0dBi Model117-06528 Drawing [U7-Industrial-AP] WIFI 5G Antenna Performance WIFI 5G Working frequency5150-5850 MHz Antenna typePatch Gain10.0 / 11.0 / 12.0dBi Model117-06528 Drawing [U7-Industrial-AP] External WIFI 2G Antenna Performance WIFI 2G Working frequency2400-2500 MHz Antenna typeDipole Gain5.0 dBi Model117-06408 Drawing [U7-Industrial-AP] External WIFI 5G Antenna Performance WIFI 5G Working frequency5150-5850 MHz Antenna typeDipole Gain6.0 dBi Model117-06408 Drawing Manufacturer: Ubiquiti Inc. Address: 685 3 rd Avenue Floor New York, NY 10017 United States

427 West 12800 South Draper, UT 84020 Test Report Certification FCC ID SWX-U7ID IC ID 6545A-U7ID Equipment Under Test U7-Industrial Test Report Serial Number TR10940_02 Date of Test(s) 13 - 15, 18 - 22, 26 May; 2 - 4 June; 14, 24, 26, 31 July 2026 Report Issue Date 20 August 2026 Test Specification Applicant 47 CFR FCC Part 15, Subpart C RSS-247, Issue 4 (July 2025) Ubiquiti Inc. 685 Third Avenue New York, NY 10017 U.S.A. NVLAP LAB CODE 600241-0 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_02 Page 2 of 62 PROPRIETARY Certification of Engineering Report This report has been prepared by Unified Compliance Laboratory (UCL) to document compliance of the device described below with the requirement of Federal Communication Commissions (FCC) Part 15, Subpart C. This report may be reproduced in full. Partial reproduction of this report may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested with the specifications provided by the manufacturer. Applicant Ubiquiti Inc. Manufacturer Ubiquiti Inc. Brand Name UBIQUITI Model Number U7-Industrial FCC ID SWX-U7ID IC ID 6545A-U7ID On this 20 th day of August 2026, I individually and for Unified Compliance Laboratory certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge and are made in good faith. Unified Compliance laboratory is not responsible for incorrect information provided by the manufacturer. Although NVLAP has accredited the Unified Compliance Laboratory testing facilities, this report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the U.S. federal government. Unified Compliance Laboratory Written By: Joseph W. Jackson Reviewed By: Kimberly DeBole 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_02 Page 3 of 62 PROPRIETARY Revision History Revision Description Date 01 Original Report Release 8/20/2026 02 Revised PSD tables in Section 5.6 for the higher gain antennas 8/25/2026 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_02 Page 4 of 62 PROPRIETARY Table of Contents 1 Client Information ................................................................................................................................. 5 1.1 Applicant ....................................................................................................................................... 5 1.2 Manufacturer ................................................................................................................................. 5 2 Equipment Under Test (EUT) ............................................................................................................... 6 2.1 Identification of EUT .................................................................................................................... 6 2.2 Description of EUT ....................................................................................................................... 6 2.3 EUT and Support Equipment ........................................................................................................ 7 2.4 Interface Ports on EUT ................................................................................................................. 7 2.5 Operating Environment ................................................................................................................. 7 2.6 Operating Modes ........................................................................................................................... 8 2.7 EUT Exercise Software ................................................................................................................. 8 2.8 Block Diagram of Test Configuration .......................................................................................... 8 2.9 Modification Incorporated/Special Accessories on EUT .............................................................. 8 2.10 Deviation, Opinions Additional Information or Interpretations from Test Standard .................... 8 3 Test Specification, Method and Procedures .......................................................................................... 9 3.1 Test Specification .......................................................................................................................... 9 3.2 Methods & Procedures .................................................................................................................. 9 3.3 FCC Part 15, Subpart C ................................................................................................................ 9 3.4 Results ......................................................................................................................................... 10 3.5 Test Location .............................................................................................................................. 10 4 Test Equipment ................................................................................................................................... 11 4.1 Conducted Emissions at Mains Ports .......................................................................................... 11 4.2 Direct Connect at the Antenna Port Tests ................................................................................... 11 4.3 Radiated Emissions ..................................................................................................................... 12 4.4 Equipment Calibration ................................................................................................................ 13 4.5 Measurement Uncertainty ........................................................................................................... 13 5 Test Results ...........................................................................................…

Text truncated - open the document above for the full version.

427 West 12800 South Draper, UT 84020 Test Report Attachment FCC ID SWX-U7ID ISED ID 6545A-U7ID Equipment Under Test U7-Industrial Test Report Serial Number TR10940_01 Date of Tests 24, 26 and 31 July 2026 Report Issue Date 21 August 2026 Test Personnel Testing performed by Evan Hartzell Test Location Testing was performed at the Unified Compliance Laboratory located at 427 West 12800 South, Draper, UT 84020. Unified Compliance Laboratory is accredited by National Voluntary Laboratory Accreditation Program (NVLAP); NVLAP Code 600241-0 which is effective until 30 June 2027. This site has also been registered with Innovations, Science and Economic Development (ISED) department as was accepted under Appendix B, Phase 1 procedures of the APEC Tel MRA for Canadian recognition. ISED No.: 25346, effective until 30 June 2027. Unified Compliance Laboratory has been assigned Conformity Assessment Number US0223 by ISED and MRA US5037. NVLAP LAB CODE 600241-0 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_Annex Page 2 of 66 PROPRIETARY Revision History Revision Description Date 01 Original Report Release 21 August 2026 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_Annex Page 3 of 66 PROPRIETARY Table of Contents 1 RF Conducted WiFi .............................................................................................................................. 4 1.1 EHT Mode .................................................................................................................................... 4 1.1.1 External Dipole Antenna ....................................................................................................... 4 1.1.2 Internal 10 dBi Antenna ...................................................................................................... 36 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_Annex Page 4 of 66 PROPRIETARY 1 RF Conducted WiFi NOTE: The first channel contains the equipment setting table(s), if subsequent channels do not have an equipment setting table(s) then the equipment setting table(s) is the same as the first channel. 1.1 EHT Mode 1.1.1 External Dipole Antenna Summary Test Frequency (MHz) Nominal Bandwidth (MHz) Result RF output power 2412.000 20.000000 PASS Minimum Emission Bandwidth 6 dB 2412.000 20.000000 PASS Power Spectral Density 2412.000 20.000000 PASS Occupied Channel Bandwidth 99% 2412.000 20.000000 PASS Tx Spurious Emission 2412.000 20.000000 PASS Minimum Emission Bandwidth 6 dB 2437.000 20.000000 PASS Power Spectral Density 2437.000 20.000000 PASS Occupied Channel Bandwidth 99% 2437.000 20.000000 PASS Tx Spurious Emission 2437.000 20.000000 PASS Minimum Emission Bandwidth 6 dB 2462.000 20.000000 PASS Power Spectral Density 2462.000 20.000000 PASS Occupied Channel Bandwidth 99% 2462.000 20.000000 PASS Tx Spurious Emission 2462.000 20.000000 PASS Minimum Emission Bandwidth 6 dB 2422.000 40.000000 PASS Power Spectral Density 2422.000 40.000000 PASS Occupied Channel Bandwidth 99% 2422.000 40.000000 PASS Tx Spurious Emission 2422.000 40.000000 PASS Minimum Emission Bandwidth 6 dB 2437.000 40.000000 PASS Power Spectral Density 2437.000 40.000000 PASS Occupied Channel Bandwidth 99% 2437.000 40.000000 PASS Tx Spurious Emission 2437.000 40.000000 PASS Minimum Emission Bandwidth 6 dB 2452.000 40.000000 PASS Power Spectral Density 2452.000 40.000000 PASS Occupied Channel Bandwidth 99% 2452.000 40.000000 PASS Tx Spurious Emission 2452.000 40.000000 PASS 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_Annex Page 5 of 66 PROPRIETARY RF output power (2412 MHz; 24.000 dBm; 20 MHz) Result DUT Frequency (MHz) Gated RMS (dBm) Limit Max (dBm) Gated EIRP (dBm) DutyCycle (%) Result 2412.000000 22.5 30.0 22.5 99.702 PASS OSP PowerMeter settings Setting Instrument Value Target Value Measurement Time 1.000 s 1.000 s Points 1000000 1000000 Time resolution 1.000 μs 1.000 μs Minimum Emission Bandwidth 6 dB (2412 MHz; 24.000 dBm; 20 MHz) 6 dB Bandwidth DUT Frequency (MHz) Bandwidth (MHz) Limit Min (MHz) Limit Max (MHz) Band Edge Left (MHz) Band Edge Right (MHz) 2412.000000 13.900000 0.500000 --- 2406.875000 2420.775000 DUT Frequency (MHz) Max Level (dBm) Result 2412.000000 7.9 PASS Bandwidth Le ve l in d Bm 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_Annex Page 6 of 66 PROPRIETARY Measurement Setting Instrument Value Target Value Start Frequency 2.39200 GHz 2.39200 GHz Stop Frequency 2.43200 GHz 2.43200 GHz Span 40.000 MHz 40.000 MHz RBW 100.000 kHz ~ 100.000 kHz VBW 300.000 kHz ~ 300.000 kHz SweepPoints 800 ~ 800 Sweeptime 56.836 μs AUTO Reference Level 10.000 dBm 10.000 dBm Attenuation 30.000 dB AUTO Detector MaxPeak MaxPeak SweepCount 100 100 Filter 3 dB 3 dB Trace Mode Max Hold Max Hold Sweeptype FFT AUTO Preamp off off Power Spectral Density (2412 MHz; 24.000 dBm; 20 MHz) Result DUT Frequency (MHz) Frequency (MHz) PSD (dBm) Limit Max (dBm) Result 2412.000000 2412.456750 -10.310 8.0 PASS Ports Port State 1 used 2 used 427 West 12800 South, Draper, UT 84020 TR10940_U7-Industrial_FCC_15.247_WiFi_Annex Page 7 of 66 PROPRIETARY Measurement Setting Instrument Value Target Value Start Frequency 2.39700 GHz 2.39700 GHz Stop Frequency 2.42700 GHz 2.42700 GHz Span 30.000 MHz 30.000 MHz RBW 3.000 kHz <= 3.000 kHz VBW 10.000 kHz >= 9.000 kHz SweepPoints 20000 ~ 20000 Sweeptime 4.424 ms AUTO Reference Level 10.000 dBm 10.000 dBm Attenuation 30.000 dB AUTO Detector RMS RMS SweepCount 100 100 Filter 3 dB 3 dB Trace Mode Average Power Average Power Sweeptype FFT AUTO Preamp off off Occupied Channel Bandwidth 99% (2412 MHz; 24.000 dBm; 20 MHz) 99 % Bandwidth DUT Frequency (MHz) Bandwidth (MHz) Limit Min (MHz) Limit Max (MHz) Band Edge Left (MHz) Band Edge Right (MHz) 2412.000000 18.876404 --- --- 2402.561798 2421.438202 DUT Frequency (MHz) Result 2412.000000 PASS Le ve l in d Bm 427 West 12800 South, Draper, UT 84020 TR10940_U7-Indust…

Text truncated - open the document above for the full version.