SWX-U7PROPDigital Transmission Radio

www.ui.com Date: 17 February 2023 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 RE: Attestation Statement Part 2.911(d)(7) – FCC: SWX Ubiquiti Inc. (“the Applicant”, FRN: 0012268215) certifies that, as of the date of this letter agreement, C T Corporation System is the Applicant’s designated U.S. agent for service of process for the above referenced grantee code. Applicant agrees to maintain an agent for no less than one year after (i) the Applicant has terminated all marketing and importation or (ii) the conclusion of any Commission-related proceeding involving the equipment certified by the FCC. C T Corporation System accepts, as of the date hereof, the obligation of the designated U.S. agent for service of process for the above referenced grantee code. Designated U.S. Agent Information: Name: C T Corporation System Address: 1015 15th Street N.W., Suite 1000, Washington, D.C., 20005 Email: [email protected] U.S. Agent FRN: The agent for service of process does no other business with the FCC and does not have an FRN. Sincerely, Ubiquiti Inc. C T Corporation System Alex Macon Denise Bell, Assistant Secretary By:

www.ui.com Date: 30 August 2024 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements 6PP Filing – FCC ID: SWX-U7PROP We, Ubiquiti Inc., attest that this device under FCC ID SWX-U7PROP complies with device protocol requirements and operational restrictions: for indoor client 6PP. 1. Device Protocol Attestation Statement: a. Contention-Based Protocol, as demonstrated in the test report, is permanently embedded in the module and is not host-dependent. b. This device will always be under the control of a low-power indoor AP and will only initiate brief messages to be under the control of an indoor low-power AP. These brief messages will only occur if the subordinate has detected a low-power indoor AP operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. c. Once under control of an indoor access point, a subordinate will initiate connections with clients, other access points, or other subordinate devices at a lower power or equal to the power advertised by the access point controlling the subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6PP. d. Resolution Limit Client Power determines the maximum power level allowed on client devices that associate to the Access Point. 2. Statement acknowledging device restrictions: a. This Access Point operates in the 5.925-7.125 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. b. The operation of this device will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that this device's operation is permitted in large aircraft while flying above 10,000 feet. c. Prohibited for control of or communications with unmanned aircraft systems, including drones. d. Has no direct connection to the internet. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer

www.ui.com Date: 6 September 2024 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(ii) Filing – FCC ID: SWX-U7PROP Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List 1 (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer 1 https://www.fcc.gov/supplychain/coveredlist

www.ui.com Date: 30 August 2024 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(i) Filing – FCC ID: SWX-U7PROP Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer

www.ui.com Power of Attorney Date: May 8, 2022 Dear Sir or Madam, I hereby have entrusted the following individuals and entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following individuals and entity to be a proxy to handle all certification matters. Clay Allred Joseph W. Jackson Richard L. Winter Tyler Parry Kimberly Rodriguez Tanner Langley Unified Compliance Laboratories Address : 427 W 128000 South Draper Utah 84020 e-mail : [email protected] Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York NY 10017 United States Of America Sincerely, Alex Macon Ubiquiti, lnc. Compliance Manager

685 3 RD AVE. • NEW Y0RK, NY 10071 • www.ui.com Date: 3 September 2024 Federal Communications Commission 7435 Oakland Mills Rd. Columbia, MD 21046 RE: Request for Original Equipment Certification – FCC: SWX-U7PROP It is hereby requested that Ubiquiti Inc. obtain FCC Original Equipment Certification of a radio apparatus on the Ubiquiti Inc. product U7 Pro. The associated FCC: number is listed above. The U7 Pro is a PoE powered WiFi 7 access point with a 2.5 GbE PoE port. The U7 Pro provides a 9.3 Gbps aggregate throughput rate. The U7 Pro transmits in the 2.4 GHz, 5 GHz and 6 GHz frequency bands and uses integrated antennas. The U7 Pro is powered from an 802.3at PoE power adapter. Sincerely, Alex Macon Ubiquiti lnc. Compliance

www.ui.com Date: 3 September 2024 TIMCO Engineering, Inc. 13146 NW 86 th Drive Suite 400 Alachua, Florida 32615 RE: Request for Confidentiality In reference to the application under FCC ID: SWX-U7PROP, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commission’s Rules, Ubiquiti Networks hereby requests permanent confidential treatment of the accompanying information as outlined below: Block Diagram Schematics Theory of Operation Software Security The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the important rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short term confidentiality on the following attachments until 180 days from grant date. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alex Macon Ubiquiti lnc. Compliance Manager

M/N U7 Pro Indoor use only IC: 6545A-U7PROP FCC ID: SWX-U7PROP Ubiquiti Inc. 685 Third Avenue, New York, NY 10017 USA Label Location on Back of DUT

M/N U7 Pro Indoor use only IC: 6545A-U7PROP FCC ID: SWX-U7PROP Ubiquiti Inc. 685 Third Avenue, New York, NY 10017 USA Label Location on Back of DUT

Maximum Permissible Exposure FCC Part 2 Sections §2.1091 and §2.1093 Test Requirement(s): §15.407(f): U-NII devices are subject to the radio frequency radiation exposure requirements specified in §1.1307(b), §2.1091 and §2.1093 of this chapter, as appropriate. All equipment shall be considered to operate in a “general population/uncontrolled” environment. RF Exposure Requirements: §1.1307(b)(1) and §1.1307(b)(2): Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. RF Radiation Exposure Limit: §1.1310: As specified in this section, the Maximum Permissible Exposure (MPE) Limit shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Sec. 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Sec. 2.1093 of this chapter. MPE Limit: EUT’s operating frequencies @ WiFi 2412 – 2462 MHz; UNII-1 5180 – 5240 MHz; UNII-2a 5260 – 5320 MHZ; UNII-2c 5500 – 5720 MHz; UNII-3 5745 – 5825 MHz; UNII-5 5955 – 6415; UNII-6 6435 – 6515; UNII-7 6535 – 6885; UNII-8 6895 – 7115; Limit for Uncontrolled exposure: 1 mW/cm 2 or 10 W/m 2 Equation from page 18 of OET 65, Edition 97-01 S = PG / 4R 2 or R = √(PG / 4S) where, S = Power Density (mW/cm 2 ) P = Power Input to antenna (mW) G = Antenna Gain (numeric value) R = Distance (cm) Test Results: FCC Frequency (MHz) Con. Pwr. (dBm) Con. Pwr. (mW) Ant. Gain (dBi) Ant. Gain numeric Pwr. Density (mW/cm 2 ) Limit (mW/cm 2 ) Margin Distance (cm) Result 2437* 29.26 843.33 4 2.51 0.270 1.0 -0.730 25 Pass 5240 27.32 539.51 6 3.98 0.274 1.0 -0.726 25 Pass 5260 23.59 228.56 6 3.98 0.116 1.0 -0.884 25 Pass 5720 23.99 250.61 6 3.98 0.127 1.0 -0.873 25 Pass 5775* 29.25 841.40 6 3.98 0.427 1.0 -0.573 25 Pass 6265 23.59 228.56 5.8 3.80 0.111 1.0 -0.889 25 Pass 6505 21.80 151.36 5.8 3.80 0.073 1.0 -0.927 25 Pass 6585* 23.71 234.96 5.8 3.80 0.114 1.0 -0.886 25 Pass 6905 22.82 191.43 5.8 3.80 0.093 1.0 -0.907 25 Pass *Simultaneous Transmission (Worse case): 0.811 1.0 -0.189 25 Pass The safe distance for SWX-U7PROP where Power Density is less than the MPE Limit listed above was found to be 25 cm. This device does not perform power tune-ups, therefore the maximum power is used for this analysis.

PROPRIETARY - INTERNAL USE ONLY [U7 Pro] antenna measurement PROPRIETARY - INTERNAL USE ONLY [WiFimeasurement] Peak gain (dBi) 2.4G (Max gain frequency) 4 Model117-05232 Antenna type: Stamp PROPRIETARY - INTERNAL USE ONLY [WiFimeasurement] Peak gain (dBi) 5G (Maxgain frequency) 6 Model117-05232 Antenna type: Stamp PROPRIETARY - INTERNAL USE ONLY [WiFimeasurement] Peak gain (dBi) 6G (Maxgain frequency) 5.8 Model117-05232 Antenna type: Stamp PROPRIETARY - INTERNAL USE ONLY [WIFI Antenna Photo] CONFIDENTIAL -INTERNAL USE ONLY

427 West 12800 South Draper, UT 84020 Test Report Certification FCC ID SWX-U7PROP Canada ID 6545A-U7PROP Equipment Under Test U7 Pro Test Report Serial Number TR9343_05 Date of Test(s) 19, 23, 29 and 30 August 2024 Report Issue Date 3 September 2024 Test Specification Applicant 47 CFR FCC Part 15, Subpart E RSS-GEN Ubiquiti Inc. 685 Third Avenue New York, NY 10019 U.S.A. NVLAP LAB CODE 600241-0 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_05 Page 2 of 22 PROPRIETARY Certification of Engineering Report This report has been prepared by Unified Compliance Laboratory (UCL) to document compliance of the device described below with the requirement of Federal Communication Commissions (FCC) Part 15, Subpart E. This report may be reproduced in full. Partial reproduction of this report may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. Applicant Ubiquiti Inc. Manufacturer Ubiquiti Inc. Brand Name UBIQUITI Model Number U7 Pro FCC ID SWX-U7PROP Canada ID 6545A-U7PROP On this 3 rd day of September 2024, I individually and for Unified Compliance Laboratory certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge and are made in good faith. Although NVLAP has accredited the Unified Compliance Laboratory testing facilities, this report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the U.S. federal government. Unified Compliance Laboratory Written By: Joseph W. Jackson Reviewed By: Richard L. Winter 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_05 Page 3 of 22 PROPRIETARY Revision History Revision Description Date 01 Original Report Release 3 September 2024 02 Added DFS Spot Check Data In Section 2 12 September 2024 03 Revised Sections 2.2 and 2.3. Added Sections 2.4 and 2.5 16 September 2024 04 Removed Section 2.5 16 September 2024 05 Revised Section 2.4 and add Section 2.5 25 September 2024 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_05 Page 4 of 22 PROPRIETARY Table of Contents 1 Client Information ................................................................................................................................. 5 1.1 Applicant ....................................................................................................................................... 5 1.2 Manufacturer ................................................................................................................................. 5 2 Summary ............................................................................................................................................... 6 2.1 Identification of EUT .................................................................................................................... 6 2.2 Introduction ................................................................................................................................... 6 2.3 Description of EUT Differences and Justification ........................................................................ 7 2.4 U7 Pro Spot Check Test Plan ........................................................................................................ 8 2.5 Illustrations ................................................................................................................................... 9 3 Spot Check Test Data .......................................................................................................................... 10 3.1 Power and PSD ........................................................................................................................... 10 3.2 DFS ............................................................................................................................................. 12 3.3 U7 Pro Spot Check – Radiated TX Spurious Emissions ............................................................. 17 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_05 Page 5 of 22 PROPRIETARY 1 Client Information 1.1 Applicant Company Ubiquiti Inc. 685 Third Avenue New York, NY 10017 U.S.A. Contact Name Alex Macon Title Compliance Manager 1.2 Manufacturer Company Ubiquiti Inc. 685 Third Avenue New York, NY 10017 U.S.A. Contact Name Alex Macon Title Compliance Manager 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_05 Page 6 of 22 PROPRIETARY 2 Summary 2.1 Identification of EUT Brand Name UBIQUITI Model Number U7 Pro Serial Number 05B1B5 Dimensions (cm) 20.6 x 20.6 x 4.6 2.2 Introduction The purpose of this document is to provide definition of the differences between models and evidence of their similarities. It will also identify the test data that is to be used between the models and identifies the data that will be new to the U7 Pro. This document is based on guidance provided in KDB 484596 DO1 Referencing Test Data. The applicant takes full responsibility for the fact that the test date referenced in this test report represents valid data for demonstrating compliance for the variants listed in this application. The following tables outline the identifying devices. 2.2.1 U7-Pro – (Original Equipment) Certification U7-Pro Equipment Class Rule Part Frequency Bands DTS Part 15 C 2412 – 2462 MHz NII Part 15 E 5180 – 5240 MHz NII Part 15 E 5260 – 5320 MHz NII Part 15 E 5500 – 5720 MHz NII Part 15 E 5745 – 5825 MHz NII (6ID) Part 15 E 5955 – 7115 MHz NII (6PP) Part 15 E 5955 – 7115 MHz 2.2.2 U7 Pro – (New Original Equipment) Certification U7 Pro Equipment Class Rule Part Frequency Bands DTS Part 15 C 2412 – 2462 MHz NII Part 15 E 5180 – 5240 MHz NII Part 15 E 5260 – 5320 MHz NII Part 15 E 5500 – 5720 MHz NII Part 15 E 5745 – 5825 MHz NII (6ID) Part 15 E 5955 – 7115 MHz NII (6PP) Part 15 E 5955 – 7115 MHz 427 West 12800 South, Draper, UT 84…

Text truncated - open the document above for the full version.

427 West 12800 South Draper, UT 84020 Test Report Certification FCC ID SWX-U7PROP Canada ID 6545A-U7PROP Equipment Under Test U7 Pro Test Report Serial Number TR9343_06 Date of Test(s) 19, 23, 29 and 30 August 2024 Report Issue Date 3 September 2024 Test Specification Applicant 47 CFR FCC Part 15, Subpart E RSS-GEN Ubiquiti Inc. 685 Third Avenue New York, NY 10019 U.S.A. NVLAP LAB CODE 600241-0 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_06 Page 2 of 22 PROPRIETARY Certification of Engineering Report This report has been prepared by Unified Compliance Laboratory (UCL) to document compliance of the device described below with the requirement of Federal Communication Commissions (FCC) Part 15, Subpart E. This report may be reproduced in full. Partial reproduction of this report may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. Applicant Ubiquiti Inc. Manufacturer Ubiquiti Inc. Brand Name UBIQUITI Model Number U7 Pro FCC ID SWX-U7PROP Canada ID 6545A-U7PROP On this 3 rd day of September 2024, I individually and for Unified Compliance Laboratory certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge and are made in good faith. Although NVLAP has accredited the Unified Compliance Laboratory testing facilities, this report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the U.S. federal government. Unified Compliance Laboratory Written By: Joseph W. Jackson Reviewed By: Richard L. Winter 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_06 Page 3 of 22 PROPRIETARY Revision History Revision Description Date 01 Original Report Release 3 September 2024 02 Added DFS Spot Check Data In Section 2 12 September 2024 03 Revised Sections 2.2 and 2.3. Added Sections 2.4 and 2.5 16 September 2024 04 Removed Section 2.5 16 September 2024 05 Revised Section 2.4 and add Section 2.5 25 September 2024 06 Revised Table in Section 2.4.1 26 September 2024 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_06 Page 4 of 22 PROPRIETARY Table of Contents 1 Client Information ................................................................................................................................. 5 1.1 Applicant ....................................................................................................................................... 5 1.2 Manufacturer ................................................................................................................................. 5 2 Summary ............................................................................................................................................... 6 2.1 Identification of EUT .................................................................................................................... 6 2.2 Introduction ................................................................................................................................... 6 2.3 Description of EUT Differences and Justification ........................................................................ 7 2.4 U7 Pro Spot Check Test Plan ........................................................................................................ 8 2.5 Illustrations ................................................................................................................................... 9 3 Spot Check Test Data .......................................................................................................................... 10 3.1 Power and PSD ........................................................................................................................... 10 3.2 DFS ............................................................................................................................................. 12 3.3 U7 Pro Spot Check – Radiated TX Spurious Emissions ............................................................. 17 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_06 Page 5 of 22 PROPRIETARY 1 Client Information 1.1 Applicant Company Ubiquiti Inc. 685 Third Avenue New York, NY 10017 U.S.A. Contact Name Alex Macon Title Compliance Manager 1.2 Manufacturer Company Ubiquiti Inc. 685 Third Avenue New York, NY 10017 U.S.A. Contact Name Alex Macon Title Compliance Manager 427 West 12800 South, Draper, UT 84020 TR9343_U7_Pro_FCC_15.407_UNII_SpotCheck_06 Page 6 of 22 PROPRIETARY 2 Summary 2.1 Identification of EUT Brand Name UBIQUITI Model Number U7 Pro Serial Number 05B1B5 Dimensions (cm) 20.6 x 20.6 x 4.6 2.2 Introduction The purpose of this document is to provide definition of the differences between models and evidence of their similarities. It will also identify the test data that is to be used between the models and identifies the data that will be new to the U7 Pro. This document is based on guidance provided in KDB 484596 DO1 Referencing Test Data. The applicant takes full responsibility for the fact that the test date referenced in this test report represents valid data for demonstrating compliance for the variants listed in this application. The following tables outline the identifying devices. 2.2.1 U7-Pro – (Original Equipment) Certification U7-Pro Equipment Class Rule Part Frequency Bands DTS Part 15 C 2412 – 2462 MHz NII Part 15 E 5180 – 5240 MHz NII Part 15 E 5260 – 5320 MHz NII Part 15 E 5500 – 5720 MHz NII Part 15 E 5745 – 5825 MHz NII (6ID) Part 15 E 5955 – 7115 MHz NII (6PP) Part 15 E 5955 – 7115 MHz 2.2.2 U7 Pro – (New Original Equipment) Certification U7 Pro Equipment Class Rule Part Frequency Bands DTS Part 15 C 2412 – 2462 MHz NII Part 15 E 5180 – 5240 MHz NII Part 15 E 5260 – 5320 MHz NII Part 15 E 5500 – 5720 MHz NII Part 15 E 5745 – 5825 MHz NII (6ID) Part 15 E 5955 – 7115 MHz NII (6PP) Part 15 E…

Text truncated - open the document above for the full version.