SWX-UAG3G3 Reader

V02072023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/18/2024 Ref: Attestation Statement Part 2.911(d)(7) Filing Grantee Code: SWX Ubiquiti Inc. certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi “iCertifi” is our designated U.S. agent for service of process for the above referenced FCC ID. Ubiquiti Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission- related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance consulting, LLC dba iCertifi FCC FRN: 0033399411 Address: 2445 NE Division Street, Suite 202 Bend, OR 97703 United States Contact Person: Paul Preston Tel: 866-885-4575 Email: [email protected] Sincerely, Ubiquiti Inc. FRN:0012268215 Americas Compliance Consulting LLC dba iCertifi Alex Macon Paul Preston

www.ui.com Date: October 15, 2024 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(i) Filing – FCC ID: SWX-UAG3 Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer

www.ui.com Date: October 15, 2024 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(ii) Filing – FCC ID: SWX-UAG3 Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List 1 as an entity producing “covered” equipment. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer 1 https://www.fcc.gov/supplychain/coveredlist

Declaration for model numbers Hereby, We Name: Ubiquiti Inc. Address: 685 Third Avenue, 27th Floor New York, New York, 10017 USA declares that this equipment: Product description: Reader G3 Type designation(s): UA-G3-W, UA-G3-B Trademark: UBIQUITI The difference between all model numbers is external color. Model number Remark UA-G3-W White enclosure. UA-G3-B Black enclosure. All others parts (SW, circuit design, PCB, all electronic components, etc) comprised of the product is identical. Date: October 15, 2024 City: New York Name: Alex Macon Function: Compliance Manager Signature:

www.ui.com Date: October 15, 2024 RE: Request for Confidentiality In reference to the application under FCC ID: SWX-UAG3, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commission’s Rules, Ubiquiti Inc. hereby requests permanent confidential treatment of the accompanying information as outlined below: Block Diagram Schematics Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the important rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short term confidentiality on the following attachments until 180 days from grant date. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alex Macon Ubiquiti lnc. Compliance Manager

www.ui.com Power of Attorney Date: October 15, 2024 Dear Sir or Madam, I hereby have entrusted the following entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following entity to be a proxy to handle all certification matters. Cerpass Technology Corporation Address : No.10, Lane 2, Lianfu Street, Luzhu District, Taoyuan City, Taiwan R.O.C. e-mail : [email protected] Applicant : Ubiquiti Inc. Address : 685 Third Avenue ,New York NY 10017 United States Of America Sincerely, Alex Macon Ubiquiti, lnc. Compliance Manager

Ubiquiti Inc. E-Label Information Model: UA-G3-W, UA-G3-B A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information On e-label In Manual FCC/ISED ID number Yes No FCC logo / DoC logo No No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) Yes No Class A / B Digital Device user manual statements 1 Yes No Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 Yes No Describe any other FCC regulatory information included in e-label 1 Yes No 1 If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device’s surface and information required to be in the manual – refer to 784748 D02 e labelling v01 section II D 3(b) The e-label is provided as the below: UA-G3-W UA-G3-B B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: E-label and warning statements can be found in the device/controller GUI under Device > Overview > E-label info No special access codes or permissions are required to go through the above steps beyond entering a user- defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the last page of user manual. C. Labeling for Importation and Purchasing Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: 1. The FCC/ISED ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts The FCC ID and model number are present on the product packaging. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Yes, it is provided.

CERPASS TECHNOLOGY CORP. Report No.: 24070590-TRFCC02 Cerpass Technology Corp. Issued Date : Oct. 16, 2024 T-FD-506-0 Ver 1.6 Page No. : 46 of 47 FCC ID. : SWX-UAG3 12. Radio Frequency Exposure 12.1 Applicable Standards §1.1307(b)(3)(i)(A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. §1.1307(b)(3)(i)(c) ERP is below a threshold calculated based on the distance , R between the person and the antenna / radiating structure, where R > λ / 2 π. § 1.1307(b)(3)(i)(B). Device operates between 300 MHz and 6 GHz and the maximum time-averaged power or effective radiated power (ERP), whichever is greater, <= Pth CERPASS TECHNOLOGY CORP. Report No.: 24070590-TRFCC02 Cerpass Technology Corp. Issued Date : Oct. 16, 2024 T-FD-506-0 Ver 1.6 Page No. : 47 of 47 FCC ID. : SWX-UAG3 12.1 EUT Specification Frequency band (Operating) WLAN: 2412MHz ~ 2462MHz WLAN: 5150MHz ~ 5250MHz WLAN: 5250MHz ~ 5350MHz WLAN: 5470MHz ~ 5725MHz WLAN: 5725MHz ~ 5850MHz Bluetooth: 2402MHz ~ 2480MHz Device category Portable (<20cm separation) Mobile (>20cm separation) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Evaluation applied Blanket 1 mW Blanket Exemption MPE-based Exemption SAR-based Exemption Remark: The maximum conducted output power is 8.23dBm (6.653mW) at 2440MHz (with 4.00dBi antenna gain.) 12.2 Result Channel Frequency (MHz) Max. Conducted output power (dBm) Max. Tune up power (dBm) Antenna Gain(dBi) Max.Tune up e.r.p. Power (dBm) Max. Tune up e.r.p power (mW) Limit (mW) 2402-2480 8.23 8.73 4.00 10.58 11.43 3060 No non-compliance noted. ----------THE END OF REPORT----------

UA-G3-WAntenna Datasheet [UA-G3-W] Antenna data BT Working frequency2.4-2.5 GHz Antenna typeMonopole Model117-03843 Peak gain4 dBi [UA-G3-W] Antenna data NFC Working frequency13.56 MHz Antenna typeLoop Gain0 dBi MaterialFPCB Model117-03662 CONFIDENTIAL -INTERNAL USE ONLY

CERPASS TECHNOLOGY CORP. Report No.: 24070590-TRFCC02 Cerpass Technology Corp. Issued Date : Oct. 16, 2024 T-FD-506-0 Ver 1.6 Page No. : 1 of 47 FCC ID. : SWX-UAG3 FCC RADIO TEST REPORT Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York, New York 10017, USA Equipment : G3 Reader Model No. : UA-G3-W, UA-G3-B Trade Name : UBIQUITI FCC ID : SWX-UAG3 I HEREBY CERTIFY THAT : The sample was received on Sep. 04, 2024 and the testing was completed on Oct. 07, 2024 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Mark Liao / Supervisor Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory CERPASS TECHNOLOGY CORP. Report No.: 24070590-TRFCC02 Cerpass Technology Corp. Issued Date : Oct. 16, 2024 T-FD-506-0 Ver 1.6 Page No. : 2 of 47 FCC ID. : SWX-UAG3 CONTENTS 1. Summary of Test Procedure and Test Results ................................................................................ 5 1.1 Applicable Standards ................................................................................................................. 5 2. Test Configuration of Equipment under Test ................................................................................... 6 2.1 Feature of Equipment under Test ............................................................................................... 6 2.2 Carrier Frequency of Channels .................................................................................................. 7 2.3 Test Mode and Test Software ..................................................................................................... 8 2.4 Description of Test System ......................................................................................................... 9 2.5 General Information of Test ...................................................................................................... 10 2.6 Measurement Uncertainty ........................................................................................................ 11 3. Test Equipment and Ancillaries Used for Tests ............................................................................. 12 4. Antenna Requirements ..................................................................................................................... 14 4.1 Standard Applicable ................................................................................................................. 14 4.2 Antenna Construction and Directional Gain ............................................................................. 14 5. Test of AC Power Line Conducted Emission ................................................................................. 15 5.1 Test Limit .................................................................................................................................. 15 5.2 Test Procedures ....................................................................................................................... 15 5.3 Typical Test Setup .................................................................................................................... 16 5.4 Test Result and Data ................................................................................................................ 17 5.5 Test Photographs ..................................................................................................................... 19 6. Test of Spurious Emission (Radiated) ............................................................................................ 20 6.1 Test Limit .................................................................................................................................. 20 6.2 Test Procedures ....................................................................................................................... 21 6.3 Typical Test Setup .................................................................................................................... 22 6.4 Test Result and Data (9kHz ~ 30MHz)..................................................................................... 24 6.5 Test Result and Data (30MHz ~ 1GHz) ................................................................................... 24 6.6 Test Result and Data (1GHz ~ 25GHz) .................................................................................... 26 6.7 Restricted Bands of Operation ................................................................................................. 32 6.8 Test Photographs (30MHz ~ 1GHz) ......................................................................................... 33 6.9 Test Photographs (1GHz ~ 25GHz) ......................................................................................... 34 7. Test of Spurious Emission (Conducted)......................................................................................... 36 7.1 Test Limit .................................................................................................................................. 36 7.2 Test Procedure ......................................................................................................................... 36 7.3 Test Setup Layout .................................................................................................................... 36 7.4 Test Result and Data ................................................................................................................ 36 8. On Time, Duty Cycle and Measurement methods ......................................................................... 39 8.1 Test Limit .................................................................................................................................. 39 8.2 Test Procedure .......................................................................…

Text truncated - open the document above for the full version.